Used Hurco Bmc 30 for sale (164)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions Iijdstrhq Hjpfx Alxef - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: B3M92212078CC, CNC Vertical Machining Center HURCO Type BMC 30/M Year of manufacture: 1998 CNC path control Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update, e.g. TFT monitors) Iiedpfx Alow Tdiuexof - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg Good condition

Condition: good (used), Year of construction: 2004, operating hours: 16,651 h, functionality: fully functional, machine/vehicle number: M342-06204054DFA, travel distance X-axis: 760 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, feed length X-axis: 760 mm, feed length Y-axis: 510 mm, feed length Z-axis: 610 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 18 kVA, torque: 236 Nm, controller manufacturer: Hurco, controller model: Ultimax 4, workpiece length (max.): 1,020 mm, workpiece width (max.): 510 mm, workpiece height (max.): 610 mm, workpiece weight (max.): 750 kg, total height: 2,700 mm, total length: 280 mm, total width: 2,300 mm, table width: 510 mm, table height: 850 mm, table length: 1,020 mm, table load: 1,000 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 4,500 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 6 bar, spindle nose: Steilkegel Gr. 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Excellent condition: Hurco VMX 30 with extremely low operating hours! For sale is a very well-maintained, vertical 3-axis machining center, a Hurco VMX 30, manufactured in 2004. The machine is in exceptionally good condition for its age. As can be easily seen from the operating hours, the machine has only been used very little by us. It was used exclusively for light-duty operation/toolmaking and was not subjected to heavy series production. The mechanical components (guideways, ball screws, and spindle) are correspondingly only slightly worn and offer high precision. The machine is equipped with the popular Ultimax 4 dual-screen control system, which is highly regarded worldwide for its extremely fast and easy dialog programming directly on the machine. Iodpfjzudd Tjx Alxeif

Condition: excellent (used), Year of construction: 2017, Hurco VMX30i vertical machining center Year: 2017 Isdpfx Alezf Rxfexeif Technical details: X-Axis Movement 760 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table size 1020x510 mm Table load 1000 kg Spindle nose SK40 Spindle speed up to 12000 rpm Tool magazine 30 positions Max weight 7 kg Max tool diameter 80 mm Max tool length 300 mm Rapid traverse rate in X/Y/Z : 35/35/30 m/min Weight 4800 kgs Accessories/options: - With linear scales on all axis, with higher accuracy standard - Through spindle coolant - Chip conveyor - Cooling System - Spindle Cooling - Software options as per on the pictures Under power in our warehouse. Clamping units, vices, and dust extractor are not the scope of the delivery.

Condition: excellent (used), Year of construction: 2018, operating hours: 2,240 h, Hurco VMX30i vertical machining center Year: 2018 Power on hours: 8220 Spindle hours only: 2240 Technical details: X-Axis Movement 760 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table size 1020x510 mm Table load 1000 kg Spindle nose SK40 Spindle speed up to 12000 rpm Tool magazine 30 positions Max weight 7 kg Max tool diameter 80 mm Max tool length 300 mm Rapid traverse rate in X/Y/Z : 35/35/30 m/min Weight 4800 kgs Accessories/options: - Through spindle coolant - Chip conveyor - Cooling System - Spindle Cooling Iodozqzwpepfx Alxsif Under power in our warehouse. Clamping units, vices, are not the scope of the delivery.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 06584, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, controller model: Hurco Ultimax, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Axes: 3 Travel in X-axis: 1,020 mm Travel in Y-axis: 510 mm Travel in Z-axis: 610 mm Spindle speed (max.): 8,000 rpm Motor power: 15 kW Iodpfxozuw A Ns Alxoif Table length: 1,220 mm Table width: 510 mm MACHINE DETAILS Control system: Hurco Ultimax Drive system: CNC Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,350 x 2,400 mm Weight: 5,000 kg Shipping packages: 1 EQUIPMENT Documentation CE marking

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Spindle speed 15,000 rpm, input 15Kw, Hurco Winmax 5 Control, Spindle taper BT40, Isdpfx Aozh Hvxolxsif 30 ATC, Coolant, Low volt light, Swarf Conveyor.

Condition: used, Year of construction: 2016, operating hours: 1,476 h, functionality: fully functional, Hello, we are offering a Hurco VM 30 i Plus for sale here. Travel: X-axis: 1270 mm Y-axis: 510 mm Iiedpfxsyhw Eae Alxef Z-axis: 510 mm Control: Max5 Taper: SK-A40 Max spindle speed: 12,000 rpm Transport weight: 4,550 kg If interested, please call. Sale on behalf of customer.

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, Iiodpszh I Agsfx Alxof table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2014, Controller WINMAX DSM Table size 1020 × 510 mm Max. load capacity 1000 kg X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 610 mm Drive power 13 kW Speed ​​range 10 - 18000 rpm ATC magazine 40-positions Spindle type HSK63A Rapid traverse X/Y/Z = 35 / 35 / 30 m/min Feed rates 3 - 15200 mm/min Weight 5000 kgs Iodpfx Aloyxb Dhexsif Dimensions L x W x H = 2450 x 2650 x 2700 mm Equipment, accessories - Software options: 3D, DXF, NCPP/ISNC Ulti-Motion, Solid Model Import, Job List, Pocket/Island, Rigid tapping, Graphical Simulation - Coolant through spindle 20 bar, - Glass Scales on all axes, - Renishaw zero point presetter - Air coolant through the spindle - Chip Conveyor - Portal Handwheel - Machine mounts The machine is nearly in new condition. Available for immediate sale. Currently powered up in Hungary.

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Iodpfx Aszfx Uhjlxoif Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle speeds : 18000 [rpm] - Spindle power : 25 [kW] LINEAR AXES - Travels on X/Y/Z axes : 760 / 510 / 520 [mm] - Rapid traverses rates (X/Y/Z) : 45 / 45 / 40 [mm/min] A ROTARY AXIS - Travel : -110 / +30 [°] - C ROTARY AXIS - Travel : 360 [°] - Rapid traverse rate : 25 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 40 TABLE - Table dimensions : Ø248 [mm] - Maximum weight upon table : 200 [kg] POWER SUPPLY - Supply voltage : 400 [V] Iiedpfx Asy Tzctjlxjf - Total installed power : 48 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.940 x 4.060 [mm] - Machine height : 2.865 [mm] - Machine weight : 6000 [kg] EQUIPMENT - CNC : Hurco WinMax / MAX5 - Interactive programming - Electronic handwheel - Coolant tank * with high-pressure pump - Coolant through spindle - Chips conveyor - Spindle cooling unit

Condition: used, Year of construction: 2007, x-travel 760 mm y-travel 510 mm z-travel 610 mm table surface area 1.020 x 510 mm control WINMAX spindle turning speed range 12.000 U/min spindle drive 13,5 kW 24 St. tool adaptor SK 40 | | internal coolant system feed 20 bar rapid traverse 35/35/30 m/min weight of the machine ca. 5,0 t used vertical machinig centre with 4th axis - 4th axis Iijdpfx Alsznnc Tjxsf - Dual toolchanger - internal coolant with filter - spindle oil cooling - electric hand wheel

Condition: good (used), Year of construction: 2005, Hurco VMX 30, Year of manufacture 2005, Ultimax 4 control system, travel X/Y/Z 780/510/610 mm, 24-position tool changer, Iedpfeu Ib A Uex Alxjif SK 40 holder, Table size 1020 x 510 mm, max. table load 1,000 kg, Spindle speed up to 10,000 rpm, spindle drive 11 KW, chip tray,

Condition: used, Year of construction: 2022, surface area 1321 x 610 mm Isdpfxjza Hquo Alxjif max. table load 1800 kg travel -x axis 1270 mm travel -y axis 508 mm travel -z axis 508 mm spindle cone SK40 number of spindle speeds 12000 U/min spindle capacity 15 kW spindle torque max. 82 Nm rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 21 kW weight of the machine ca. 4,25 t dimensions of the machine ca. 4,1 x 3,35 x 2,6 m the machine is like new!!!, only 136 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 250 mm - Max. tool weight: 7 kg Accessories: documentation

Condition: good (used), Year of construction: 2010, HURCO CNC Machining Center VMX 30 U with WinMax control Travel distances in mm: X-axis 1060 Y-axis 610 Z-axis 520 Integrated rotary and swivel axis: Coolant system Rinsing system to support chip removal Chip splash-guard enclosure Coolant spray gun Signal light for machine operating status Isdpexvtf Aofx Alxjif Work area machine lamp Set of leveling pads Machine manual on CD includes: WinMax control 2 color screens (text + graphics) 2 software modules (1 x conversational programming at the machine + 1 x for ISO code programming via external programming device or CAD/CAM system through RS-232 C or V 24 interface)

Condition: not inspected (used), Year of construction: 2000, travel distance X-axis: 610 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 510 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, Ultimax control system Table: 760 x 400 mm Iodpfxsy T Ekbo Alxoif Travel: 610 x 405 x 510 mm Tool changer: 24 tools Maximum spindle speed: 8,000 rpm Weight: 4,000 kg

Condition: good (used), Year of construction: 2008, operating hours: 11,870 h, functionality: fully functional, Controller WINMAX DSM Double screen Table size 1020 x 510 mm Table load max 1350 kgs X travel 762 mm Y travel 510 mm Z travel 610 mm A axis -35/+110 degree C axis 0 - 360 degree Spindle speed 12000 rpm Spindle taper SK40 Spindel power 11/15 kW Weight 4900 kgs Dimensions LxWxH = 2300 x 2400 x 2600 mm Accessories, features - KITAGAWA TT251 nc round table - Coolant through spindle 20 bar - Coolant unit - Spindle cooler - Chip conveyor - SW options: 3D, DXF, pocket islands, rigid tapping, NCPP, ISNC, realistic graphics, material and tool databank, surface selection, - machine mounths - external hydraulics Iodpfxsy U Hvho Alxsif The machine is still under power and can be inspected in operation.

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 30 with Kitagawa 4th axis, through-spindle coolant (IKZ), NC vise 125, various tool holders, well-maintained condition Iiedpfx Aljxrcnlexjf

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Isdsw Nklhspfx Alxoif Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,900 h, We offer in very good condition Hurco VMX30 HSi with HSK-A63 spindle and 18k RPM. X-Axis travel: 762mm Y-Axis travel: 508mm Z-Axis travel: 610mm Iedsx N E H Uepfx Alxsif The machine has following options: Internal coolant 20 bar 40 Tool changer 18 k RPM Spindle hSK-A63 Linear Scales Touchprobe Renishaw OMP40 Toolprobe Renishaw TS27R Ultimotion software Tool change optimization software Please not vices are not with sale of machine

Condition: used, Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 510 mm, total height: 3,250 mm, total length: 3,545 mm, total width: 3,970 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, Equipment: chip conveyor, For sale is a high-precision Hurco VTXU vertical 5-axis machining center with a swivel rotary table. The machine is in very good cosmetic condition. Technical data: Year of manufacture: July 2008 Control: WinMax (dual-screen) Travel distances X / Y / Z: 800 x 700 x 510 mm Swivel range A-axis (tilting axis): -30° to +110° Rotation range C-axis (rotary table): 360° (full range) Rotary table diameter: 610 mm Table load: max. 400 kg Distance spindle nose - table: 150 - 660 mm Max. spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Iedpfxezvd U Uo Alxjif Tool holder: SK 40 Magazine capacity: 48 tools Max. tool length: 280 mm Max. tool weight: 7 kg Tool change time chip-to-chip: 8 sec. Voltage: 400 V / 50 Hz Connected load: 55 kVA Compressed air requirement: 6 - 8 bar Machine dimensions (W x D x H): 3,545 x 3,970 x 3,250 mm Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: good (used), Year of construction: 2002, Hurco VMX 30, year of construction 2002, Ultimax 4 control unit, Travel X/Y/Z 760/510/610 mm, table size 1020 x 510 mm, 24-position tool changer, spindle speed up to 10,000 rpm, coolant system, electric handwheel, Iijdpfx Aljtud Ncsxof Pocket milling with islands, synchronous thread cutting, 3D contour software, DXF capable, chip conveyor,

Condition: excellent (used), Year of construction: 1997, Ultimax 3-4 control system with two color screens (text and graphics) Travel X/Y/Z: 1020/510/610 mm Speed: 8000 rpm Tool magazine for 24 tools, SK 40 Ijdpfx Aozatlxjlxeif DCF software

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, For sale is a vertical 3-axis CNC machining center, Hurco BMC20, with Hurco Ultimax control. Iijdpfx Aey T Hkpjlxjf The machine is ideally suited for toolmaking, single-part production, and small batch sizes. Technical data: Control: Hurco Ultimax Travel in X: approx. 560 mm Travel in Y: approx. 355 mm Travel in Z: approx. 355 mm Table size: approx. 760 × 355 mm Tool holder: SK40 / CAT40 Spindle speed up to 6000 rpm 16-tool automatic tool changer Main motor: approx. 7.5–10 HP Rapid traverse: approx. 10 m/min Machine weight: approx. 2800–3200 kg Equipment: - various accessories Condition: used Machine is complete Inspection possible while powered on