Used Hurco Bmc 20 for sale (158)

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, For sale is a vertical 3-axis CNC machining center, Hurco BMC20, with Hurco Ultimax control. The machine is ideally suited for toolmaking, single-part production, and small batch sizes. Technical data: Control: Hurco Ultimax Travel in X: approx. 560 mm Travel in Y: approx. 355 mm Travel in Z: approx. 355 mm Table size: approx. 760 × 355 mm Tool holder: SK40 / CAT40 Spindle speed up to 6000 rpm 16-tool automatic tool changer Main motor: approx. 7.5–10 HP Rapid traverse: approx. 10 m/min Machine weight: approx. 2800–3200 kg Pgsdpfx Asy T Hkpjlhsn Equipment: - various accessories Condition: used Machine is complete Inspection possible while powered on

Condition: excellent (used), Year of construction: 1997, Ultimax 3-4 control system with two color screens (text and graphics) Travel X/Y/Z: 1020/510/610 mm Pgodpszatlxefx Alhsn Speed: 8000 rpm Tool magazine for 24 tools, SK 40 DCF software

Condition: used, Year of construction: 2023, surface area 1168 x 508 mm max. table load 1800 kg travel -x axis 1016 mm travel -y axis 508 mm travel -z axis 508 mm spindle taper SK40 spindle speed 10000 U/min spindle capacity 15 kW spindle torque max. 99 Nm rapid traverse y/x/z axis 28 m/min Pgedpoza Hqnefx Alhon control HURCO MAX5 total power requirement 20 kW weight of the machine ca. 4,15 t dimensions of the machine ca. 3,7 x 3,3 x 2,5 m The machine is like new !!!, only 61 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 360 mm - Max. tool weight: 7 kg Accessories: documentation

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Pjdpfx Aletrhq Hshogn Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel Pgjdpfx Aow Nklhelhjn - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: used, Year of construction: 1999, x-travel 610 mm y-travel 405 mm z-travel 510 mm table surface area 760 x 400 mm Pedpevh Nbuefx Alhogn spindle taper SK 40 spindle turning speed - stepless 80 - 8000 U/min spindle drive 7,5 kW max. torque on the spindle max. 142 Nm feeds 3,0 - 7600 mm/min rapid motion -longitudinal/cross/vertical 24 / 24 / 15 m/min distance table / vertical spindle max. 600 mm table load 350 kg no. of tools in magazin 24 workpiece diameter at full load 80 mm tool length - max. 300 mm weight of tools max. 6,8 kg control ULTIMAX SSM total power requirement 18 kVA weight of the machine ca. 4,1 t Accessories: 2 tool fixtures SK 40, 3-jaw chuck RÖHM, chip conveyor, coolant

Condition: ready for operation (used), Year of construction: 2000, operating hours: 25,000 h, Machining center Huroc BMC 64 No IKZ chip conveyor coolant trough spindle mount SK 40 DIN 69871 Pgedpfsp I Hanox Alhon

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: B3M92212078CC, CNC Vertical Machining Center HURCO Type BMC 30/M Year of manufacture: 1998 CNC path control Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Pgsdpfx Alsw Tdiuohjn Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update, e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg Good condition

Condition: ready for operation (used), functionality: limited functionality, To be sold as a package: HURCO BMC 30 Machine number: BK-9-002-020 Year of manufacture: 1990 HURCO BMC 45M Machine number: 92001097BB Year of manufacture: 1997 The machines can be inspected but cannot be operated. Delivery terms: ex works Location: 36110 Schlitz-Bernshausen Delivery time: immediately Psdjt Takaepfx Alhjgn Price: negotiable

Condition: ready for operation (used), Year of construction: 2014, operating hours: 10,000 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco VM20i was manufactured in 2014. It features an X-axis travel of 1,016 mm, Y-axis travel of 508 mm, and Z-axis travel of 400 mm. The machine includes a table size of 1,170 x 507 mm and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VM20i vertical machining centre we have for sale. Contact us for further details. • Control: WINMAX • Clamping System: SK40 DIN69871 AD/B • Tool Holder: SK40 • Table Size: 1,170 x 507 mm • Spindle Hours: Approx. 10,000 h • Condition: Used • CE Marking: Yes • Frequency: 50 Hz • Voltage: 400 V • Power Supply: 3 Phase • Largest Motor: 13 kVA • Full Load: 20 kVA • Interrupt Capacity: 10,000 A • Short Circuit Current: 22 kA RMS Symmetrical • Maximum Ambient Temperature: 35 °C Technical Specification Psdpfx Aszc If Selhsgn Through-spindle Coolant No

Condition: good (used), Year of construction: 2014, functionality: fully functional, Hurco VM 20 i, Year of manufacture: 2014, Control system: Winmax, Travel range X/Y/Z: 1016/508/400 mm, Tool changer: 24-position, Tool holder: SK 40, Podpezc Icwjfx Alhegn Spindle speed: up to 12,000 rpm, Chip conveyor, Approximately 11,000 operating hours.

Condition: not inspected (used), Year of construction: 2000, travel distance X-axis: 610 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 510 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, Ultimax control system Table: 760 x 400 mm Travel: 610 x 405 x 510 mm Tool changer: 24 tools Podpoy T Ekbefx Alhjgn Maximum spindle speed: 8,000 rpm Weight: 4,000 kg

Condition: excellent (used), Year of construction: 2011, HURCO TMX8MYS H-TS8034 Pjdoxg D A Hepfx Alhsgn Year of manufacture: 2011

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 402 mm, turning length: 758 mm, turning diameter: 450 mm, spindle speed (max.): 3,000 rpm, turning diameter over bed slide: 582 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum turning diameter: 450 mm Maximum turning length: 758 mm Diameter of rotation over the bed: 582 mm Diameter of rotation over the cross slide: 402 mm Spindle speed: 3,000 rpm Maximum spindle torque: 351 Nm Distance between centers: 744 mm Bar diameter: 81 mm Chuck size: 260 mm (10") Maximum bar diameter: 40 mm Axes: X, Z Number of tool positions in the tool changer: 12 Tool shank size: 25 × 25 mm Travel in the X-axis: 250 mm Travel in the Z-axis: 790 mm Rapid traverse rate in the X/Z direction: 30 m/min MACHINE DETAILS Control model: Hurco WinMax Spindle power: 22 kW Power supply: 400 V / 50 Hz (market-dependent) Pgodpfxezgt U Sj Alhsn Machine weight: approx. 5,000 kg

Condition: excellent (used), Year of construction: 2017, Hurco VMX30i vertical machining center Year: 2017 Technical details: X-Axis Movement 760 mm Y-Axis Movement 510 mm Z-Axis Movement 610 mm Table size 1020x510 mm Table load 1000 kg Spindle nose SK40 Spindle speed up to 12000 rpm Tool magazine 30 positions Max weight 7 kg Max tool diameter 80 mm Max tool length 300 mm Pgsdpfxszf Rxfe Alhon Rapid traverse rate in X/Y/Z : 35/35/30 m/min Weight 4800 kgs Accessories/options: - With linear scales on all axis, with higher accuracy standard - Through spindle coolant - Chip conveyor - Cooling System - Spindle Cooling - Software options as per on the pictures Under power in our warehouse. Clamping units, vices, and dust extractor are not the scope of the delivery.

Condition: used, Year of construction: 2012, operating hours: 35,000 h, machine/vehicle number: MU44-16201032ELCS, Travel ranges (X/Y/Z): 800/700/510 mm, with NC rotary table, max. spindle speed: 12,000 rpm, 48-tool changer, WinMax control system, chip conveyor, coolant system. Pedpfjzha Eysx Alhogn

Year of construction: 2013, operating hours: 9,073 h, condition: used, machine/vehicle number: L8H-11203053DFBH, Travel ranges (X/Z): 203/550 mm, max. turning diameter: 256 mm, 12-station turret with driven tools, max. speed: 4,000 rpm, tool holder, WinMax control system, chip conveyor, coolant unit. Pjdpfjzha E Hjx Alhjgn

Condition: used, Year of construction: 2010, operating hours: 38,353 h, machine/vehicle number: MC54G-16201060AKA, Travel ranges (X/Y/Z): 3,200/2,100/920 mm, max. spindle speed: 6,000 rpm, tool holder: SK50, chip conveyor, control system: HURCO Winmax, 40-position tool changer, cooling unit: HABOR, coolant: R407C. Pgsdpfx Ajzha Etjlhen

Condition: used, Year of construction: 2012, Lathe fully functional. Psdpfx Aljy R Rdnjhjgn

Condition: used, Year of construction: 2010, Milling machines Travel distance X: 760 mm Travel distance Y :510 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Hurco WinMax spindle chuck: SK - A40 spindle revolutions: 12000 rpm table size X: 1020 mm table size Y: 508 mm max. workpiece weight: 1350 kg Pgjdjv D U Apopfx Alhjn tool changer: 24 - time input Power : 13,5 kW Torque: 214 Nm Rapid traverse: 35 m/min spindle cooling chip conveyor

Condition: excellent (used), Year of construction: 2006, Winmax control Podjzfx Unjpfx Alhjgn Travel X/Y/Z: 1270 x 660 x 610 mm Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar Pocket milling with islands Synchronous thread cutting

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar Pgjdozfx Uhjpfx Alhon

Condition: good (used), Year of construction: 2007, No longer required in production. Parts are no longer required. Pgodeumt D Hopfx Alhsn

Condition: used, Year of construction: 2018, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 Psdpfx Alezguh Hehegn milling machine / machining center table size X: 1270 mm table size Y: 610 mm input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler Hurco MAX 5 control with WinMax software

Condition: used, Year of construction: 2014, Milling machines Travel distance X: 1067 mm Travel distance Y :610 mm Travel distance Z: 610 mm HSC-machines Number of axis: 3 milling machine / machining center spindle revolutions: 12000 rpm table size X: 1270 mm table size Y: 610 mm Pgsdezguhyopfx Alhen input Power : 12 kW Torque: 237 Nm High-performance 3-axis machining center Number of tools in the magazine: 30 SK40 tool holder Internal coolant supply Spindle cooler