Used Hydraulic Copy Lathe Dubid for sale (20,191)

Condition: excellent (used), functionality: fully functional, Genini ROTOUR 100 lathe automatic Max working length: 300 mm Max turning diameter: round Ø 140 mm, square 100×100 mm Spindle motor: 15 HP Spindle speeds: 2050-2800-4100-5600 rpm Pump motor: 3 HP Lodpfxjx Tz Tro Adwshb Grinding motor: 0.5 HP

Condition: excellent (used), functionality: fully functional, Genini TBK 70 Automatic Lathe Output square 45×140 mm (approx. 10 pcs/min – 600 pcs/h, with 2 roughing tools – 1 finishing tool) Max. workable block 70×70 mm Min. workable block 20×20 mm Max. workable length 300 mm Lhedpfx Ajx Tzpgedwob Min. working length 25 mm Spindle motor power 5.5 HP (3.5 kW) Pump motor power 2 HP (1.5 kW) CE mark

Year of construction: 2014, operating hours: 8,674 h, condition: ready for operation (used), - USED- 2-AXIS CNC LATHE DISTANCE BETWEEN CENTRES: 1750 mm MAX ROTATING DIAMETER: 820 mm MAX TURNING DIAMETER: 730 mm BAR CAPACITY: 115 mm SPINDLE: 1500 rpm; 30 - 37 kW; ASA 2-11 ; 510 mm X-AXIS TRAVEL: 365+25 mm Z-AXIS TRAVEL: 1650 mm GEAR BOX: 4-STEPS RAPID FEEDS X-Z: 15 - 12 m/min TURRET HEAD: 10 POS CONTROL UNIT: FANUC 0i-TD WEIGHT: 12800 Kg OVERALL DIMENSIONS: 6200 x 2500 x 2500 mm ACCESSORIES: ROTATING TAILSTOCK ; SWARF CONVEYOR ; ETHERNET PORT ; RS 232 SERIAL PORT ; PCMCIA SERIAL PORT ; USB PORT Lhsdpfx Asq H Tr Tedwsb

Year of construction: 1984, condition: ready for operation (used), Rafamet UBB 112/2 Wheel Tread Diameter Minimum 700 mm Wheel Tread Diameter Maximum 1120 mm Lhjdpfohvml Ijx Adweb Clamping length 540 - 1050 mm Wheelset Axle Length Minimum 1640 mm Wheelset Axle Length Maximum 2800 mm Maximum Tire Width 150 mm Maximum Wheelset Weight 4000 kg Saddle Set Up Motion Speed 2000 mm/min Saddle Feed Maximum 2000 mm/min Main Drive Motor Power 80 kW Weight aprox 40000 kg

Condition: new, Year of construction: 2025, overall weight: 990 kg, opening width: 788 mm, total width: 920 mm, total length: 2,072 mm, cutting force: 40 t, pressure: 220 bar, operating pressure: 220 bar, warranty duration: 12 months, Hydraulic car body removal shears Weight: 990 kg Ledox Hwblepfx Adwohb - Total length: 2072 mm - Width: 920 mm - Rotation: 360 degrees - Cutting power: 40 tons - Oil flow: 50-70 l/min - Oil pressure: 220 bar - Excavator weight: 18-24 tons

Condition: excellent (used), functionality: fully functional, Locatelli Ariete 3 Automatic Lathe Max/min billet length: 1000/200 mm Max/min billet cross-section: 85×85/20x20 mm Maximum workpiece length: 120 mm with hole, 150 mm without hole Automatic material feeder Complete DTR documentation Main motor: 3/4 kW Two spindle speeds: 2500/3600 rpm Oil pump motor: 2.2 kW Lhodpfx Asx Thylsdwjb Working pressure: 6–8 bar

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli Ariete 3 Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Maximum length of the processed material 120mm with a hole 150mm without a hole Automatic material feeder Lhsdpsx Thw Dsfx Adwjb CE certificate Complete DTR documentation Main engine with a power of 3/4kw Two spindle speeds 2500/3600rpm Oil pump engine 2.2kw Working pressure 6-8bar

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 265864, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, feed rate X-axis: 30 m/min, feed rate Z-axis: 33 m/min, torque: 233 Nm, distance table center to spindle nose: 687 mm, Equipment: documentation/manual, Mazatrol Smart Control. Spindle speed 5000 rpm. X/Z travel 195mm/560mm. Fitted with 215mm diameter. 3 jaw-powered chuck Lhedpfevfm H Asx Adweb 12-station turret. Tailstock. Tool setter. Part catcher.

Condition: used, Year of construction: 1995, machine/vehicle number: 253057, Please state your offer price. Ljdpfsycu Imjx Adwjhb Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane

Condition: used, Year of construction: 1998, gebraucht 1998 090148 prompt, Zwischenverkauf v Belgien 24900 € 1 Lodoyackwjpfx Adwohb 3100 mm 6 mm 0.5 - 3.5 ° 9,5 kW 950 mm 4070 mm 2330 mm 3400 mm 1850 mm 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity

Condition: used, Year of construction: 2024, gebraucht 2024 Lhsdpewiqzdjfx Adwsb 7319 prompt, Zwischenverkauf v Türkei 6900 € 1 120 to horizontal verschiebbar 400 mm 900 mm 1200 mm 5,8 mm/s 9.5 mm/s 1200 x 400 mm 4 kW 1900 mm 1000 mm 2450 mm 1250 kg with horizontally sliding cylinder motorhydraulic with additional hand pump Height adjustable table Oil Pressure Gauge VERSION WITH HANDWHEEL AND LOCKING PIN CYLINDER ADJUSTMENT € 9.520,-- (stock no.: 7320) Option: 1 pair of V-block € 540,--

Condition: new, Year of construction: 2025, neu 2025 090132 prompt, Zwischenverkauf v Türkei 47500 € 798.38 € 1 41800 € 3100 mm 6 mm Lsdewiqyyepfx Adwehb 4 mm 50 mm 15 1/min 1.5 ° 16 14 to 1000 mm 200 mm/s 15 kW 200 l 2 Stk. 865 mm 500 mm 3515 mm 4110 mm 2200 mm 3700 mm 2100 mm 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules WE HAVE MORE THAN 850 REFERENCES!

Condition: used, Year of construction: 2017, Doosan Puma GT3100LM Year of manufacture: 2017 Control: Fanuc 0i-TF Turning diameter: [mm] 376 Turning length [mm] 1245 Main spindle: Belt-driven spindle Max. spindle speed 2800 rpm Max. power 22 kW Max. torque 1124 Nm Bar capacity 102 mm 3-jaw chuck, Schunk ROTA THW plus 315-104 Lhedexggktjpfx Adwjb 12-position turret BMT65 turret head Travel in X/Z axes 260/1350 mm

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, SMEC PL25 YEAR 2012 Max. Cutting Diameter : 380 Lhedpfex Rxydex Adweb Max. Cutting Length : 530 Chuck Size : 10'' Max. Spindle Speed : 3500rpm Max. Bar Size : 75

Condition: new, sheet thickness: 10bending length: 4100upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 10.250,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references! Lhedpfod Ab Ryex Adwjb

Condition: new, stroke lenght (max.): max. 400table height: Fußboden bis Tischplatte Oberkante 850daylight: 600speed: Vorlauf 120 mm , Druck 13 - 4 mm, Rücklauf 170/mm/formance of pump: 65 Lt./min (REXROTH - Axialkolbenpumpe)motor: 15 kw - 1500d / minmessurements (LxWxH): 2.100 x 2.400 x 4.300weight approx.: 11.000 Capacity: 1500kN. (150 ton - at 245 BAR) Operating selection: Via key switch Manual / set-up via two-hand operation without light sensor fuse on front side (rear side always active) Automatic via two-hand operation at full speed (with active light sensor fuse) Main cylinder: Ø 270mm. Auxiliary cylinder: 2 pcs. Ø 70 x 50mm. Motor: 15kw. - 1500d/min. (IE-3) Pump: 45cc. - 65Lt./min.   REXROTH - axial piston pump Speed: flow 120mm. - Pressure: 13 - 4mm. - Return 170mm./sec. Lodpjmpfwdjfx Adwjhb Clearance: 1300mm. Table top: 1200 x 800 x 90mm. - with T - grooves ram plate: 1200 x 800 x 600mm. - with T - grooves & ribbing Installation height: 600mm. (max. distance between table & ram plate) Stroke length: max. 400mm. Table height: 850mm. (Floor to table top upper edge) ----- Hydraulics: (Hydraulic accessories on top of the press) Kontrol Block & Valves (REXROTH Proportional Valves) Prefill valve (NG.125) 8 way guide Hydraulic ram safety device Mechanical ram safety device for TDC position Pressure adjustment via PLC. Speed adjustment via PLC. Pressure stop valve for 600 sec. Air cooler Automatic lubrication for guides Auxiliary motor Auxiliary pump Control system: Main control box (mounted on the side of the press frame) Pivoting control panel SIEMENS S7 - 1200   KTP. 9 SIEMENS screen (language selection DE.- ENG.) Safety PLC. (SICK) Light sensor for front & back of work area (SICK 750 + 150mm.) Soft starter Two hand operation (Movable) SECOMEA Ethernet connection Ruler for setting the stroke length (450mm. - NOVOTECHNIK 16BIT) Workspace lighting (2-fold IP-66)   8 free ON & OFF outputs on the PLC. for external connections ----- Protective railing around the hydraulics Lateral ladder ----- Documentation: Operating manual DEUTSCH(1 fold paper & 1 fold USB.) Hydraulics & control diagrams Parts lists CE. Certificate Standard :EN.16092/1/3 ----- Total dimensions: approx. 2400 x 2100 x 4100mm Total weight: approx. 11.000kg. Painting: frame RAL 7035 light grey, railing & hydraulics RAL 7016 anthracite grey. -----

Condition: good (used), Year of construction: 1999, Ref. -No.: 10443 Manufacturer: VDF BOEHRINGER Type: 16 M - G Year of construction: 1999 Type of control: CNC Control: REXROTH INDRAMAT SYSTEM 200 BTV 30 Storage location: Halberstadt Country of origin: Germany Turning Diameter: 520 mm Turning Diameter Over Slide Rest: 150 mm Spindle Speeds: 25 - 4.500 RPM Spindle Bore: 78 mm Tool Taper: VDI 40 Rapid Traverse: 15.000 mm / min Distance Between Centres: 1110 mm Spindle motor drive: 18 kW Turret places: 12 Pcs Machine length: 5000 mm Machine width: 2800 mm Machine Height: 3200 mm Weight Of The Machine Ca.: 14,5 t Lsdpfjycpw Ajx Adwjhb Further information: 2x revolver (12 places) Machine can be inspected under power by appointment.

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Lhsdpfsycpwpsx Adwsb Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: used, turning diameter 256 mm turning length 483 mm greates pass round over bed 548 mm swing diameter over slide rest 320 mm length between centers 584 mm x-axis 203 mm z-axis 508 mm spindle tunring speed 4.800 U/min Lhsdpfeycxklsx Adweb number of tool places 10 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Catalogue No.: 7502 TECHNICAL DATA Feed Carriage DTBC-P — Wheelbase: 750 mm — Feedstock diameter: 100–800 mm — Total lateral travel: 160 mm — Log rotation (left/right): 360° — Travel speed (forward & reverse): stepless — Hydraulic pump motor power: 5.5 kW Auxiliary Carriage DTCB — Wheelbase: 750 mm — Lateral travel range: 160 mm — Log rotation (left/right): 360° — Lateral movement motor power: 1.1 kW — Feed carriage dimensions (L/W/H): 2850/1400/1500 mm — Auxiliary carriage dimensions (L/W/H): 950/650/750 mm — Total weight: 1450 kg ADVANTAGES – Manufactured in Poland – Robust construction – Includes hoses and chains – Used machine, in very good condition, fully refurbished (invoice available for inspection) Lhodpfxjx Uz U Ee Adwob PRODUCT FEATURES The auxiliary carriage is designed to support logs or cants on the infeed side of the sawmill within a diameter range of 100 mm to 750 mm. The feed carriage is intended for feeding logs and cants into the sawmill within a diameter range of 100 mm to 750 mm. The machine facilitates log handling, including clamping the log, lateral movement, and rotating, all powered by hydraulic drives. Net price: 59,900 PLN Net price: 14,260 EUR (based on 4.2 EUR/PLN exchange rate) (Prices may vary depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and brand names are used for informational purposes only, to enable identification of the goods. We only resell items that have already been placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: used, Year of construction: 1971, functionality: fully functional, Center distance: 2.000 mm turning diameter: 1.200 mm turning diameter in the gap (with guide spindle pulled out to the right): approx. 1.460 max. width of the adjustable bed: 900 mm spindle bore: 85 mm Ledpfxjycuh Ho Adwshb turning rate: 14 - 710 U/min dimensions: 4.705 x 2.060 x 2.000 mm equipment: 4 fold tool clamping system, HEIDENHAIN three-axis digital readout, Three jawchuck FORKARDT F400, Vibration damping elements

Condition: refurbished (used), Year of construction: 2022, turning diameter over bed: 540 mm turning diameter over slide rest: 280 mm turning length: 1.500 mm turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Ljdpfx Asycuhmedwshb Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray several tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, functionality: fully functional, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Lhedpfxeycuflo Adwjb Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600 4 driven axial tool holders 2 driven radial tool holders

Condition: used, turning diameter 240 mm turning length 530 mm control Siemens 840D SL swing diameter 560 mm x-travel 207,5 mm z-travel 530 mm turning speeds 6000 U/min Lhedpfx Aoycxibodwob 12 Stk. total power requirement --- kW weight of the machine ca. 6,1 t

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE For sale is a lightly used Drechselmeister Stratos FU 230 woodturning lathe with a center distance of 680 mm and a 2 HP motor. The demonstration machine is in very good condition. Technical Specifications - Center height: 230 mm - Swing diameter: 455 mm (up to 800 mm with optional outboard turning attachment!) - Center distance: approx. 680 mm (extendable!) - Spindle mount: M33 x 3.5 (hardened) with ASR (Euro) anti-release groove* - Spindle and tailstock taper: MT2 - Speed range (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (connection 230 V) - Weight: 178 kg Lhjdpfx Ajyaphvodwob The machine is located in A-5431 Kuchl and can be viewed at any time during our business hours. Subject to prior sale! Related search terms: woodturning lathe, lathe, turning machine, turning bench, turning tools, woodturning, turning, machine Reference: R-A0117