Used Axis Measurement System With Hydraulic Lift To 4 for sale (66,968)

Condition: good (used), Saxon Bag Sealer Ibedpfxjv Dm Epe Aabsc With Reverse Facility With Top Bag Cutter With Hydraulic Lift Mast Stainless Steel 230 Volt Power Supply

Condition: new, SALES FROM STOCK Loading Capacity: 240 kg Max Platform Height: 4 m Isdpfjulah Nox Aabobc Occupants: 1 Platform Dimension: 1.15 x 0.6 m Overall Length: 1.32 m Overall Width: 0.76 m Overall Height: 1.92 m Platform Extension: 0.55 m Extension Load: 100 kg Up/Down Speed: 34/25 sec Turning Radius: 0 Maximum Slope: 1.5°/2° Drive Tyres: 230 x 80 mm Gradeability: 25% Wheel Base: 1.0 m Travel Speed (Stowed): 4 km/h Travel Speed (Raised): 0.5 km/h Battery: 2 x 12 V / 100 Ah Lifting Motor: 24 V / 1.3 kW Drive Motors: 24 V / 0.5 kW Charger: 24 V / 15 A Weight: 660 kg Proportional Controls Automatic Pothole Protection Drivable At Full Height Non-Marking Tyres Automatic Brake System Emergency Lowering System Emergency Stop Button Cylinder Holding Valve Onboard Diagnostic System

Condition: good (used), Polar Mohr LW 1000-4 Paper Stack Lift Ibsdpjxgbflofx Aabec This device is in excellent technical and visual condition. This is the current production model. Hydraulic drive. 380V power supply. Automatic lifting cycle controlled by a photocell or manual mode, fast operation. Load capacity: 1000 kg. Pallet dimensions: 1200 x 800 cm

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Isdpfx Aaew R Syiobebc

Condition: good (used), Year of construction: 2005, total length: 4,200 mm, total width: 2,500 mm, total height: 1,800 mm, product height (max.): 4 mm, overall weight: 7,000 kg, Capacity 4 mm, cutting length 3050 mm, motor 18,5 KW, mot. back gauge, shadow line, frontarms with scale, foot pedal, pneumatic rear support, new IMEX SPS-control, dimension 420x250x180 cm, weight ca. 6500 kgs Iedpfx Aajtp I S Ajbebc

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 32 mm -Stroke: 140 mm Ibsdpfx Aaeft Ah Hsbsc -Total length retracted: 460 mm -Admission: hole Ø 23 mm -Dimensions: 460/60/H135 mm -Weight: 8.5 kg

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Ibsdpfx Aow R St Nsabjc

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 50 mm -Piston rod: Ø 32 mm -Pipe Ø outside: mm -Stroke: 260 mm -Total length retracted: 470 mm -Recording hole: Ø 25 mm -Ideal for building a hydraulic press -Number: 4x available -Price: per piece Ibjdpob A Rifsfx Aabec -Weight: 8 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Iodpob A N Ilsfx Aabobc -Cylinder: Ø 40 mm -Piston rod: Ø 40 mm -Pipe Ø outside: 55 mm -Stroke: 500 mm -Total length retracted: mm -Admission hole: 30 mm -Admission piston rod: Ø 44 mm ball head -Ideal for building a hydraulic press -Number: 50x available -Price: per piece -Weight: 12.5 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders -Manufacturer: GSL, hydraulic cylinder tilt cylinder stroke 1590 mm Ijdpfxsgwhu Do Aabobc -Type designation: D040025-Z2 T06 -Piston rod: Ø 25 mm / holder Ø 20 mm -Dimension: 1895/90/110 mm -Weight: 19.5 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 80 mm Ibedpfx Aefrzrloaboc -Piston rod: Ø 45 mm -Tube: Ø outside mm -Stroke: 250 mm -Total length retracted: 500 mm -Admission: hole Ø 40 mm -Ideal for building a hydraulic press -Price: per piece -Number: 8 Stück -Dimension: 500/200/H135 mm -Weight: 19 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston rod: Ø 50 mm -Tube: Ø outside 145 mm -Stroke: 385 mm -Total length: retracted 683 mm Iedpfxjfrzrpe Aabebc -Admission: hole Ø 40 mm -Ideal for building a hydraulic press -Number: 11 pieces -Price: per piece -Dimensions: 675/145/H270 mm -Weight: 41 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 63 mm -Piston rod: Ø 32 mm -Pipe Ø outside: mm -Stroke: 340 mm Ibjdpob A Szusfx Aabec -Total length: retracted 600 mm -Admission: hole Ø 30/45 mm -Ideal for building a hydraulic press -Price per piece -Quantity: 4 St. -Dimension: 600/100/H170 mm -Weight 19.5 kg / piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Ibjdsb A S Rzepfx Aaboc -Cylinder: Ø 100 mm -Piston rod: Ø 50 mm -Pipe Ø outside: mm -Stroke: 400 mm -Total length retracted: 60 mm -Recording hole: Ø 50 mm -Ideal for building a hydraulic press -Number: 15x available -Price: per piece -Weight: 23.5 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Isdpfx Ajb A Hfrsabebc -Cylinder: Ø 50 mm -Piston rod: Ø 32 mm -Pipe Ø outside: mm -Stroke: 400 mm -Total length retracted: 565 mm -Recording hole: Ø 20 mm -Ideal for building a hydraulic press -Number: 10x available -Price: per piece -Weight: 6 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 50 mm -Piston rod: Ø 32 mm -Pipe Ø outside: mm -Stroke: 242 mm -Total length retracted: 470 mm -Recording hole: Ø 25 mm -Ideal for building a hydraulic press Ibjdpfx Ajb A Ifteaboc -Number: 6x available -Price: per piece -Weight: 7.5 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams - Piston rod: O 50 mm -Tube: O outside 145 mm -Stroke: 302 mm -Total length: retracted 640 mm Ibsdpfefrpntsx Aabec -Admission: hole O 40 mm -Quantity: 2 pieces -Price per piece -Dimensions: 640/145 / H210 mm -Weight: 38 kg / piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm Iodpfofrzrwsx Aabobc -Tube: Ø outside mm -Stroke: 304 mm -Total length retracted: 600 mm -Admission: hole Ø 50 mm -Ideal for building a hydraulic press -Dimensions: 600/225/H135 mm -Weight: 24 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams Ibodpfx Aaob A Sqbjbec -Cylinder: Ø 50 mm -Piston rod: Ø 25 mm -Pipe Ø outside: mm -Stroke: 260 mm -Total length retracted: 470 mm -Recording hole: Ø 20 mm -Ideal for building a hydraulic press -Number: 10x available -Price: per piece -Weight: 5.5 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 45 mm Isdjb A Nxgopfx Aabsbc -Pipe Ø outside: mm -Stroke: 250 mm -Total length retracted: 460 mm -Recording hole: Ø 40 mm -Ideal for building a hydraulic press -Number: 10x available -Price: per piece -Weight: 22.5 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 80 mm -Piston rod: Ø 45 mm Iodeb A I Tdepfx Aabjbc -Pipe Ø outside: mm -Stroke: 300 mm -Total length retracted: 600 mm -Recording hole: Ø 50 mm -Ideal for building a hydraulic press -Number: 10x available -Price: per piece -Weight: 24 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 50 mm Ibjdpfx Aajb A Rt Iobjc -Piston rod: Ø 32 mm -Pipe Ø outside: mm -Stroke: 186 mm -Total length retracted: 535 mm -Recording hole: Ø 30 mm -Ideal for building a hydraulic press -Number: 3x available -Price: per piece -Weight: 10 kg/piece

Condition: used, Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable -Number: 4x engines available Iedjb A H Nbopfx Aabjbc -Price: per piece -Dimensions: 235/125 mm -Weight: 15 kg/piece

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilt cylinders -double acting -Manufacturer: GSL, hydraulic cylinder, tilt cylinder, with control valve, stroke 1590 mm -Type designation: D040025-Z T06 Isdpsgwhu Ijfx Aabebc - Piston rod: Ø 25 mm / holder Ø 20 mm -Number: 6x cylinders available -Price per piece -Dimensions: 1895/105/110 mm -Weight: 22.8 kg / pc.

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Cylinder: Ø 100 mm -Piston rod: Ø 45 mm -Pipe Ø outside: mm -Stroke: 260 mm Ijdpfx Aeb A Ix Ueabsbc -Total length retracted: 530 mm -Recording hole: Ø 40 mm -Ideal for building a hydraulic press -Number: 1x available -Price: per piece -Weight: 21.5 kg/piece