Used Hydraulic Part for sale (14,267)

Condition: good (used), Hydraulic container, hydraulic tank, aluminum container for hydraulic pump, hydraulic unit Dksdpfxslhwlge Ag Rjg -Hydraulic tank: Universal tank made of aluminum, unused -Tank capacity: approx. 230 l -Connections: see photos -Dimensions: 565/485/H1215 mm -Weight: 40 kg

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, working width: 4,000 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 12 1/min, sheet thickness (max.): 16 mm, sheet thickness steel (max.): 16 mm, Standard Features • ELGO P40T Touch NC Control Unit • Rexroth / Hoerbiger hydraulic system • Automatic CNC-controlled blade clearance, stroke, and blade angle adjustment • 1,000 mm NC-controlled, programmable, motorized backgauge • 250 mm throat depth • Programmable backgauge retraction movement • Backgauge lifting function for sheets longer than 1,000 mm • Adjustable cutting length via control panel for increased stroke rate in short cuts • Ball transfer sheet support table • Upper blade with 2 cutting edges / lower blade with 4 cutting edges • Special pivot system to reduce maintenance needs • 1,000 mm front support arms with ruler, T-slots, and stopper • Front and side safety guards • Cutting line illumination and shadow wire • 1,000 mm front finger guard with openable cover • Foot pedal • Movable control lever and safety cabinets • Emergency stop buttons Optional Features • Rear pneumatic sheet support system (Type 1) • Rear pneumatic sheet support system with sheet return to the front (Type 2) • Angle-adjustable squaring arm 0–180º • Front support arms of custom lengths • Special throat depth of 500 mm • Full-length openable front finger guard cover • Front finger protection safety light curtain • Special blades • Laser cutting line indicator • Oil heater or oil cooler • Automatic or manual centralized lubrication • Electrical cabinet air conditioning cooling • CNC-controlled front sheet support arms • CE-compliant rear light barrier • Lightweight safety guards TECHNICAL SPECIFICATIONS VALUE Cutting Capacity (450 N/mm²) 16 mm Cutting Capacity (700 N/mm²) 10 mm Cutting Length 4,000 mm Cutting Angle 0.5 – 3° Cutting Speed / Fast Mode 6 / 12 spm Throat Depth 250 mm Backgauge Travel (X) 1,000 mm Table Length Table Width Dkodpfex Npd Rox Ag Rog Motor Power 30 kW Weight 21.5 tons

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements height 470 mm Dimensions Machine Length 470 mm Clamping Unit Clamping force 1100 kN Dedpfx Agox D Ea Uj Rekg This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: reconditioned (used), NR.01 Hydraulic press with 3 cylinders BIGNOZZI Power 200 Ton Completamete reconditioned Table 1550 x 1050 mm Dkjdpfohnc R Ijx Ag Reg Recess mm 1000 Piston stroke mm 500 Platen height 1180 Dimensions 2900 x 1700 x 2900 ( h) Weight Ton 10

Condition: new, pressure 30 t stroke 350 mm table surface area Arbeitsbreite 750 x 260 mm pressure 221 bar oil volume 37 dm³ work speed max. 9,8 mm/sec return speed 14 mm/sec total power requirement 3 kW Dodpfx Aei A S I Deg Rokg weight of the machine ca. 385 kg Inner diameter of the cylinder [mm]: 130 Piston rod diameter [mm]: 55 Diameter piston head [mm]: 80 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with variable speeds - Working table adjustable in height - Joystick to control piston and speed The workshop press (30T) has a fixed cylinder and a high adjustable work table (motorized). Equipped with pressure regulation, Pressure gauge, variable speed and a joystick to move the piston up and down to move off. With this joystick you can also control the speed adjust, making this motorized hydraulic press perfect for precision work is suitable.

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Mode of operation: oil-hydraulic Table height: 1175 mm Dkjdpfx Aowxw Amjg Rjg Stroke: 305 mm Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Condition: good (used), Year of construction: 2012, Hydraulic pump, hydraulic power unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: Toyoki, hydraulic control from CNC machining center Santenberg GTC S 2 -Pressure switch: Parker Senso Control SCPSDControl valves: coax 5-VMK 32 NC / 1 824 210 291 Dkodpfx Aektm Dusg Reg -Individual components: see photos -Submission/Price: complete -Dimensions: 340/145/H510 mm -Total weight: 14.7 kg

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, stroke rate (min.): 13 1/min, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, Standard Features • ELGO P40T Touchscreen NC Control Unit • Rexroth / Hoerbiger hydraulic system • Automatic CNC-controlled blade clearance, stroke, and blade angle adjustment • 1,000 mm NC-controlled, programmable, motorized backgauge • 250 mm throat depth • Programmable backgauge retract function • Backgauge lifting feature for parts longer than 1,000 mm • Adjustable cutting length via control panel to increase the number of cuts for short workpieces • Ball transfer sheet support table • 2 cutting edges on upper blade / 4 cutting edges on lower blade • Special joint system to reduce maintenance requirements • 1,000 mm front support arms with ruler, T-slot, and stopper • Front and side safety guards • Cutting line illumination and shadow wire • 1,000 mm front finger guard with openable cover • Foot pedal • Movable control lever and enclosure cabinets • Emergency stop buttons Optional Features • Rear pneumatic sheet support system (Type 1) • Rear pneumatic sheet support system with forward delivery (Type 2) • Miter gauge adjustable from 0–180° Dsdex Npddspfx Ag Rokg • Front support arms in custom lengths • Special throat depth of 500 mm • Full-length openable front finger guard cover • Front finger safety light curtain • Special blades • Laser cutting line indicator • Oil heater or oil cooler • Automatic or manual central lubrication • Electrical cabinet with air conditioning • CNC front sheet support arms • CE-compliant rear light barrier • Lightweight guard TECHNICAL SPECIFICATIONS VALUE Cutting Capacity (450 N/mm²) 10 mm Cutting Capacity (700 N/mm²) 6 mm Cutting Length 3100 mm Cutting Angle 0.5 – 3° Cutting Speed / Fast Mode 7 / 13 strokes per minute (spm) Throat Depth 250 mm Backgauge Travel (X) 1000 mm Table Length 3600 mm Table Width 880 mm Motor Power 22 kW Weight 10.5 tons

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements height 405 mm Dimensions Machine Length 405 mm Clamping Unit Clamping force 800 kN This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine. Application Types Dodpfx Aex D Ea Ijg Rokg Injection Moulding

Condition: new, pressure 60 t stroke 380 mm Dodpfx Agei A S I Is Rskg table surface area Arbeitsbreite 750 mm pressure 259 bar oil volume 38 dm³ ajustment speed 2,87 mm/sec work speed 9,5 mm/sec return speed 12 mm/sec total power requirement 2,2 kW weight of the machine ca. 540 kg Inner diameter of the cylinder [mm]: 170 Piston rod diameter [mm]: 75 Diameter piston crown [mm]: 100 - Integrated pressure gauge - Pressure regulator - Hydraulic unit with 2 speeds - Working table adjustable in height - Joystick to move the piston up / down The 60 ton workshop press has a fixed cylinder and a height-adjustable work table (motorized). Equipped with Pressure regulation, manometer, 2 speeds and a joystick for the move the piston up and down. With this joystick you can use the piston precisely move, making this hydraulic press perfect for precision jobs suitable.

Condition: good (used), 1 used single-sided press Make: SACK & KIESSELBACH, Dkedpfx Aeul U Svsg Rsg year of construction: 1962,74 serial number 31900 Pressing force 630 t, stroke 310 mm Installation height 320 mm Working height 1200 mm Drive power 10 KW

Condition: good (used), hydraulic pump with gasoline engine -mobile hydraulic unit -Gasoline engine: JLO L152 -Power: 4.4 KW Dsdpob A Hpaefx Ag Rjkg -Hydraulic pump: Hawe R6.0 -Performance: 4.3 L/min at 1450 rpm, pressure 350 bar

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 400 t, working width: 4,100 mm, stroke length: 310 mm, throat depth: 510 mm, distance between stands: 3,600 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, number of axes: 4, table height: 985 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 30 kW (40.79 HP), Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo-driven backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge-type) • Narrow lower beam (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • Rear backgauge options from X+R up to 4-6-8 axes • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower beam for multi-vee die • Backgauge X-axis distance 1000 mm • AKAS or DSP front laser safety system • Additional backgauge fingers • Additional backgauge stops TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Daylight Opening (mm) 535 Throat Depth (mm) 510 Table Height (mm) 985 Approach Speed (mm/s) 100 Return Speed (mm/s) 80 Pressing Speed (mm/s) 8 Oil Tank Capacity (L) 400 Machine Weight (kg) 22500 Main Motor Power (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axes) Dsdpfxox Npals Ag Rokg Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge-type) Safety System Front laser safety Origin Turkey

Condition: new, Year of construction: 2022, pressure 200 t stroke 400 mm table surface area Arbeitsbreite 1300 mm pressure 243 bar oil volume 64 dm³ ajustment speed 5,73 mm/sec work speed 1,84 mm/sec return speed 7,08 mm/sec total power requirement 3,0 kW weight of the machine ca. 1690 kg Inner diameter of the cylinder [mm]: 320 Piston rod diameter [mm]: 140 Diameter piston crown [mm]: 175 - adjustable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work - with digital display Dsdpot I D Thjfx Ag Rskg This 200 ton hydraulic press is equipped with a movable cylinder (left- right), a height-adjustable work table, a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing fitted.

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 175 t, working width: 3,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 2,600 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, number of axes: 4, table height: 935 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 15 kW (20.39 HP), Standard Features • 4-axis CNC control Y1, Y2, X, R (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC Control Unit • Servo-driven back gauge with ±0.03 mm precision, X=750 mm, R=250 mm • European-type Promekam quick die clamping system • Sliding front support arms • Manual crowning system (Original WILA wedge type) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-channel, V=16-22-35-50 mm, 850 H:60) Dkedsx Nn U Ujpfx Ag Rog • LED lighting Optional Features • 4-6-8 axis back gauge configurations starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Large lower table for multi-channel dies • 1000 mm X-axis back gauge travel • AKAS or DSP laser front safety system • Additional back gauge fingers • Additional back gauge tongues TECHNICAL SPECIFICATION VALUE Bending Force (Ton) 175 Bending Length (mm) 3100 Distance Between Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 515 Throat Depth (mm) 410 Table Height (mm) 935 Approach Speed (mm/s) 180 Return Speed (mm/s) 130 Pressing Speed (mm/s) 10 Oil Tank Capacity (Lt) 180 Machine Weight (kg) 9700 Main Motor (kW) 15 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Back Gauge X (mm) 750 Back Gauge R (mm) 250 Crowning Manual (WILA wedge type) Safety System Laser front safety Country of Origin Turkey

Condition: new, pressure 100 t stroke 380 mm table surface area 1740 x 996 mm pressure 258 bar ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec dayligth 700 mm table height 720 mm total power requirement 2,2 kW weight of the machine ca. 1685 kg - Manually movable portal - Movable cylinder manually (left - right) - Cylinder extension up to the table - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Joystick to move the piston up / down - Hand pump for precision work These straightening presses are equipped with a movable cylinder (on the side) Dksdpfei Db Ersx Ag Reg and a Movable frame (longitudinal-running) equipped to allow easy access to all allow points of the surface. The design of this portal press makes it possible to put heavy material on the table with a crane and that Slide the portal over the material at the beginning of the pressing process. The quality of these hydraulic straightening presses is very high. Over and beyond is the hydraulic unit with a pressure regulator, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 400 t, working width: 6,100 mm, stroke length: 310 mm, throat depth: 510 mm, distance between stands: 5,100 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, number of axes: 4, table height: 1,055 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 30 kW (40.79 HP), Standard Features • Y1, Y2, X, R 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA wedge type) • Narrow bottom table (European type) • GIVI brand linear encoders • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • Backgauge options from X+R up to 4-6-8 axes • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide bottom table for multi-channel tooling • Backgauge X distance up to 1000 mm • AKAS or DSP laser front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 400 Bending Length (mm) 6100 Distance Between Side Frames (mm) 5100 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 510 Table Height (mm) 1055 Approach Speed (mm/s) 100 Dksdpfx Asx Nn Syeg Rsg Return Speed (mm/s) 80 Pressing Speed (mm/s) 8 Oil Tank (L) 400 Machine Weight (kg) 33000 Main Motor (kW) 30 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 axes) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wedge type) Safety System Laser front safety Origin Turkey

Condition: new, pressure 100 t stroke 380 mm table surface area Arbeitsbreite 1100 mm pressure 258 bar oil volume 46 dm³ ajustment speed 7,54 mm/sec work speed 2,47 mm/sec return speed 9,06 mm/sec total power requirement 2,2 kW weight of the machine ca. 970 kg Dkedpfx Agoi A S I Se Rsg Inner diameter of the cylinder [mm]: 220 Piston rod diameter [mm]: 90 Diameter piston crown [mm]: 120 - Movable cylinder (left-right) - Integrated pressure gauge - Pressure regulator - Two-speed hydraulic unit - Working table adjustable in height - Joystick to move the piston up / down - Hand pump for precision work The 100 ton hydraulic press is equipped with a movable cylinder (left- right) and a height-adjustable work table. Over and beyond it has a pressure regulation, 2 speeds, a joystick and a hand pump for precision pressing.

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 135 t, working width: 3,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 2,600 mm, operating speed: 10 mm/s, reverse speed: 130 mm/s, number of axes: 4, table height: 935 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 11 kW (14.96 HP), Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-driven back gauge (X=750 mm, R=250 mm) with ±0.03 mm accuracy • European-style Promecam quick-release tooling system • Sliding front support system • Manual crowning system (Original WILA wedge) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower tool (60x60 mm, 4-channel, V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis back gauge options from X+R onwards • ROLLERI Roll200 hydraulic tool clamping • WILA hydraulic upper and lower tool clamping • Wide lower table for multi-channel tooling • Back gauge X distance up to 1000 mm • AKAS or DSP front safety laser system • Additional back gauge fingers • Additional back gauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 135 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (Daylight) (mm) 515 Dedpsx Nn N Ejfx Ag Rskg Throat Depth (mm) 410 Table Height (mm) 935 Approach Speed (mm/s) 210 Return Speed (mm/s) 130 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 180 Machine Weight (kg) 8350 Main Motor (kW) 11 CNC Control Unit ESA S640 Number of CNC Axes Y1-Y2-X-R (4 Axis) Back Gauge X stroke (mm) 750 Back Gauge R stroke (mm) 250 Crowning Manual (WILA wedge) Safety System Front laser safety Origin Turkey

Condition: good (used), Year of construction: 1991, sheet width - max. 1010 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded max. 20 Hübe/min cutting angle 1.5 ° work height max. 900 mm Control ELGO back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2200 kg. range L-W-H 1500 x 2155 x 1606 mm from a maintenance workshop good condition (!!) - in checked conditions - machinevideo - ?v=w22S17mfU-A Equipment: - Robust NC electro-hydraulic guillotine shear - NC electro-motorized backgauge * Includes NC ELGO positioning control "TYP 85" - Electric cutting length limiter Dksdpfx Aexrgv Tjg Rsg - Manual cutting gap adjustment - 1x side stop with scale - 2x support arms - 1x freely movable foot switch - Original operating instructions * Special accessories included: - Pneumatic holding device for thin sheet metal blanks

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 320 t, working width: 4,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 3,600 mm, operating speed: 10 mm/s, reverse speed: 110 mm/s, number of axes: 4, table height: 955 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 22 kW (29.91 HP), Standard Features • Y1, Y2, X, R 4-Axis CNC (X+R Servo) • 410 mm Stroke, 510 mm Throat Depth • ESA S650 CNC Control Unit • Servo motorized backgauge with ±0.03 mm accuracy, X=750 mm, R=250 mm • European type Promecam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper die (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-way V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4, 6, or 8-axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-channel dies • Backgauge X-travel of 1000 mm • AKAS or DSP laser beam front safety system • Additional backgauge fingers • Additional backgauge stop plates TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 320 Bending Length (mm) 4100 Distance Between Side Frames (mm) 3600 Stroke (mm) 310 Daylight Opening (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Approach Speed (mm/s) 150 Return Speed (mm/s) 110 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 290 Machine Weight (kg) 16800 Main Motor Power (kW) 22 CNC Control Unit ESA S640 Dkodpfx Agox Nn I Us Rog Number of CNC Axes Y1-Y2-X-R (4 Axes) Backgauge X Travel (mm) 750 Backgauge R Travel (mm) 250 Crowning Manual (WILA cam) Safety System Front laser safety Country of Origin Turkey

Condition: ready for operation (used), punching pressure 45.0 t punch diameter 22 in 15.0 mm punch diameter 38 in 8.0 mm round bar steel 30.0 mm square edge steel 25.0 L-beam 100 x 10.0 mm shear: flat material 300 x 12.0 mm adjustment of stroke 0 - 55 mm work height max. 940 / 1140 mm strokes per minute 34 punch diameter max. 110 mm voltage 400 V total power requirement 4.5 kW Dkjdpfx Aexaat Ujg Rog weight 1245 kg dimensions 1520 x 590 x 1700 mm In good condition (!!) New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: * Punching station * Flat steel shear * Angle/profile steel shear * Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 320 t, working width: 3,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 2,600 mm, operating speed: 10 mm/s, reverse speed: 110 mm/s, number of axes: 4, table height: 955 mm, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 22 kW (29.91 HP), Standard Features • Y1, Y2, X, R 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promecam quick die clamping system • Sliding front support system • Manual crowning system (Original WILA cam lock) • Narrow lower table (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower table for multi-channel die • Backgauge X travel distance 1000 mm • AKAS or DSP laser beam front safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 320 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 535 Throat Depth (mm) 410 Table Height (mm) 955 Descent Speed (mm/sec) 150 Return Speed (mm/sec) 110 Pressing Speed (mm/sec) 10 Oil Tank Capacity (Lt) 290 Machine Weight (kg) 14,700 Main Motor Power (kW) 22 CNC Control Unit ESA S640 CNC Axis Configuration Y1-Y2-X-R (4 Axis) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA cam lock) Safety System Laser front safety Dodpjx Nn Eaofx Ag Rskg Origin Turkey

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment Dodpfxsxaa I So Ag Rjkg - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: new, Year of construction: 2025, control type: CNC control, actuation type: hydraulic, bending force (max.): 220 t, working width: 3,100 mm, stroke length: 310 mm, throat depth: 410 mm, distance between stands: 2,600 mm, operating speed: 10 mm/s, reverse speed: 140 mm/s, number of axes: 4, type of crowning: motor-driven, back gauge adjustment: CNC-controlled, power: 18.5 kW (25.15 HP), Standard Features • Y1, Y2, X, R 4-axis CNC (X+R Servo) • 410 mm stroke, 510 mm throat depth • ESA S650 CNC control unit • Servo-motorized backgauge with ±0.03 mm precision, X=750 mm, R=250 mm • European type Promekam quick-release die clamping system • Sliding front support system • Manual crowning system (Original WILA wheeled) • Narrow lower beam (European type) • GIVI brand linear scales • Standard upper tool (H: 67, 850 R:08) • Standard lower die (60x60 mm, 4-channel V=16-22-35-50 mm, 850 H:60) • LED lighting Optional Features • 4-6-8 axis backgauge options starting from X+R • ROLLERI Roll200 hydraulic die clamping • WILA hydraulic upper and lower die clamping • Wide lower beam for multi-channel tooling • Backgauge X travel up to 1000 mm • AKAS or DSP front laser light safety system • Additional backgauge fingers • Additional backgauge tongues TECHNICAL SPECIFICATIONS VALUE Bending Force (Ton) 220 Bending Length (mm) 3100 Distance Between Side Frames (mm) 2600 Stroke (mm) 310 Open Height (mm) 515 Dkedpfx Ajx Nnzbjg Rsg Throat Depth (mm) 410 Table Height (mm) 940 Approach Speed (mm/s) 180 Return Speed (mm/s) 140 Pressing Speed (mm/s) 10 Oil Tank Capacity (L) 290 Machine Weight (kg) 11300 Main Motor (kW) 18.5 CNC Control Unit ESA S640 CNC Axes Y1-Y2-X-R (4-Axis) Backgauge X (mm) 750 Backgauge R (mm) 250 Crowning Manual (WILA wheeled) Safety System Front laser safety Origin Turkey