Used Hydraulic Test Bench for sale (25,995)

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. Fpedpfx Agetw S Awj Rsb The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Equipment: - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Condition: used, Year of construction: 2018, Nominal power in kilowatts 7,7 MW Maximum power 8,47 MW Nominal turning speed 1150 1/min Maximum turning speed 2200 1/min Nominal torque 63940 Nm Maximum torque 70330 Nm Fodpfxsrr Ammj Ag Rspb 8 MW test bench for gears, closed loop

Condition: excellent (used), Kübrich Kübrich test systems 48V belt starter generator - component test bench Details of the test stand: (see Fig. 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Switch cabinet (5) MP3: Control cabinet for the control system, transfer plate with main switch, I/O (6) MP2: Switch cabinet with Simotion (7) MP4: Switch cabinet with DC-DC converter (8) H3: Measurement technology box (9) H4: Transfer box Intended use: The test stand is used to carry out tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Fpedpfeumv Emex Ag Reb Current intensity: 330 A (short term, less than 1 s) Control voltage 24 V Mechanical performance data according to the data sheet of the load machine A transmission ratio of 1:2 to the test specimen shaft must be observed. Speeds: Load machine: Set-up mode: 0 - 50 1/min Automatic mode: 0 - 10 000 1/min Test specimen motor: Set-up mode: 0 - 100 1/min Automatic mode: 0 - 20 000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), functionality: fully functional, LVD Plate Shear MV 31/3.5 – 3100 × 3.5 mm – Guillotine Shear Manufacturer: LVD Company, Gullegem (Belgium) Model: MV 31/3.5 Max. cutting length: 3100 mm Max. sheet thickness (steel): 3.5 mm Drive system: hydraulic Backgauge: electric, 750 mm Machine weight: approx. 4,000 kg Dimensions: approx. 4000 × 1800 × 1600 mm LVD guillotine shear, Model MV 31/3.5, suitable for cutting steel sheets up to 3.5 mm thick over a width of 3,100 mm. Fodpfexmvl Tex Ag Rjpb

Condition: new, TURBO-BOOST-TEST turbocharger boost testing bench allows for professional turbocharger calibration and performance evaluation. The test bench can be used in turbine tuning and refinement, in the manufacture of hybrid turbines, to test changes in turbine performance after tuning. Our test benches are advanced systems for turbocharger tuning and testing in dynamic mode. Its provide turbocharger testing under near realistic operating conditions, ensuring full process control and detection of any potential problems, including oil leaks. HIGHLIGHTS • Complete finish testing and tuning of automotive turbochargers for engines up to 3 liters • Dynamic turbocharger testing • Installation on the regular surfaces of fastening • Running in and check on an oil leak • Tuning of electronically driven turbos is done by connecting to an external tester ATP-3000 • Installation of turbochargers of any design KEY FEATURES • More than 2000 turbo references database • Calculate turbocharger performance; • Plot supercharging vs. inlet and outlet flow graph; • Generating the resulting graph; • Testing of actuator performance: vacuum, pneumatic and electric types; • Diagnosis of servo-drives of electric actuators (optional); • All measurements are done in real time. • Calibration of the test bench before starting work • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Boost Test software. • Creation and printing of reports on the tuning process. • Self-diagnostics Fpedpfx Aottg S Usg Rsb SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1330 х 770 х 1440 mm Weight 265 kg

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition Fedpfxetrpiij Ag Ropb

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: CRi PC singelline, Well-functioning Common Rail diesel injector test bench. The machine is equipped with a new PC and recent software. It is supplied with a large selection of clamping blocks, test cables, return connections, and high-pressure pipes. Fodpfx Agsxiyxvo Rjpb

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: 052302303, Bobst Easypress 142, for the format 102x142cm to carry out models, test punching, preparation work for the production machine. excellent condition, year of construction 1997 Fpjdpfx Aeuk I Nxjg Rsb

Condition: good (used), Siga Type: GS-517-400 External dimensions LxDxH 4960 x 2500 x 2400 mm. Complete system is calibrated according to DAKKS and and therefore approved for approval-relevant tests Butane loading speed - infinitely variable from 5 g/h to 77 g/h Loading speed fuel - infinitely variable from 5 g/h to 100 g/h Fuel temperature control - infinitely variable from 20°C to 50°C Fuel quantity selectable - from 0 l to 8 l Selectable breakthrough criterion - from 1g to 10g Purge air flow temperature - Infinitely variable from 25°C to 30°C Precision scales for test piece and reference AKF - Measuring range up to 6 kg, 0.1 8 resolution Purging vacuum - Infinitely variable from 0 hPa to 30 hPa Rinsing air flow - infinitely variable from 1 l /min to 60 l/min Humidity purge air flow - infinitely variable from 10% rH to 85% rH Number of cycles from 1 to 999 (load/purge) Fjdpou Aa A Aofx Ag Repb Condition: gebraucht / used Sale ex location! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2021, condition: like new (used), (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) Fpjdpfxswurq Ro Ag Rjb ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2025, condition: new, GeoBoost-7000 Combined bench for turbocharger geometry calibration and performance evaluation. Stand for static and dynamic calibration and testing of turbocharger. It has a combined two-position design, which allows testing the turbocharger in two modes - rapid static calibration of turbocharger geometry - Full dynamic diagnostics at different operating modes GeoBoost-7000 will allow you to carry out professional testing of turbocharger operation during repair, tuning or modernization. The availability of two working zones of the machine depending on the testing method helps to carry out comprehensive diagnostics. Fjdpfxsvtn Hmj Ag Rspb HIGHLIGHTS • Simulates real-world operating conditions for accurate turbocharger diagnostics and tuning. • Flexible and versatile to work with a variety of turbocharger models. • All types of turbochargers can be installed using the accessories provided. • Oil leak testing using heated oil and compressed air. • N75 turbocharger control valve testing. KEY FEATURES - Ability to adjust the extreme position of the blades of the air flow control mechanism. - Adjusting the length of the stem to adjust the actuation torque of the air flow control mechanism. - Real-world turbocharger testing; - Real-time geometry tuning; - Performance testing of actuators: vacuum, pneumatic and electric types; - Diagnosis of servo-drives of electric actuators (optional); - Post-assembly testing of the turbocharger for oil leakage; - Availability of a high capacity vacuum pump to create the required vacuum and air flow. - Testing the turbine according to the manufacturer's test plan; - Calculate turbocharger performance; - Plot supercharger inlet and turbocharger outlet boost vs. flow; - Construct the resulting graph; - Generate and print test reports. SPECIFICATIONS Maximum rotor speed 99 000 rpm Maximum air flow rate of compressor 110 m³/min Maximum pressure of compressor 900mbar Maximum vacuum created by the vacuum pump -800mbar Power supply 380V, 3Ph, 50Hz Power input 6 kW Dimensions 1700 х 900 х 1500 mm Weight 400 kg

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Fodpfx Aof Axn Asg Rspb Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 11192, Please provide us with your offer price. Fsdpfx Agew E I U Te Rjpb Sale only within Europe (EU), including Turkey; United Kingdom, Switzerland. Technical data according to the handout. Without packaging; any warranty rights are excluded. If you wish to dismantle the system yourself, please indicate this in your bid. We do not assume any liability for the accuracy of the technical data, for the completeness of the accessories and tooling, or for compliance with all safety and environmental protection requirements as specified in the accident prevention regulations.

Year of construction: 1998, condition: excellent (used), Waste oil test bench Fpedpfjh Rnq Tox Ag Reb Make SWEP Model B 5x10 dimensions LxWxH 115x105x115 cm Weight 132 kg

Condition: excellent (used), EDAG EDAG Huf endurance test bench Purpose: This test bench is intended exclusively for testing parts that are capable of rotational and/or translational movement as part of an endurance test and within the limits of the following technical data. Technical data: Dimensions: width 1565 mm x depth 615 mm x height 1655 mm Weight approx. 450 kg Operating voltage 400V /50Hz Control voltage 5, 24 Fpjdpjvx S Apjfx Ag Reb Provisional fuse 16 A Test device: Maximum stroke 194 mm Maximum axial force 500 N Maximum moment 5 Nm Break-out force (manually operated slide) 15 N Displacement force (manually operated slide) 10 N Other equipment Ρ4, 24" TFT monitor (1900 X 1080) Operating system Windows XP Measurement and control software LabVIEW 2011 PC plug-in cards 1 card, NI PCI-6251,1 card, N1 PCI-7044 Drawer 500 mm (fully extended with automatic closing) Additional load 500 N Drawer cabinet, lockable 3 drawers The teach-in endurance test bench is a device for carrying out endurance tests On test objects that can rotate and/or move translationally, e.g. cylinders Locks, door handles, key functions. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Fpsdpfx Aewurqkjg Rjb Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Material test stand / final inspection  consisting of the following main components   Keyence XG-H500M Digital 5 million pixel B/W camera  Keyence XG-7701P Multi-camera image processing system/controller Keyence CA-DC21E Illumination Controller   Opto Engineering TC23096 Bi-telecentric lens  Keyence XG-H500M Digital 5 million pixel B/W camera  CCD: 2/3-inch monochrome CCD, squareElement all pixels 11x reading speed, 5,050,000 pixels Scan method: Progressive (61.2 ms), interlace (40.3 ms)Interlace is a binning process that sums the odd lines and even lines. Model CA-DC21E Illumination Controller   Type Illumination Controller For XG/CV-5000/CV-X200/CV-X100 Series only Input: Forced lighting cut-off: Input voltage max. 26.4 V, min. 2 mA Output Light control method (1) Constant voltage control method (DC lighting) (2) Pulse-width modulation method (emission frequency: 100 kHz) [Change of control unit setting]. Brightness levels 255 levels digital [change of control unit setting] Number of connections Number of connections 2 channels (available for LED connection and terminal block connection) Voltage 12 VDC/24 VDC [setting via DIP switches] Power Max. 40 W (30 W per channel) Synchronisation Synchronisation via FLASH output/continuous illumination [change of control unit setting] Response time (1) Constant voltage regulation: Max. 10 ms for 12 V output, Max. 20 ms for 24 V output (2) Pulse width modulation method: Max. 1 ms with 12-/24-V output. Display LED display Supply voltage 24 VDC ±10 % Current consumption 3.0 A (12 V output at maximum load), 6.5 A (24 V output at maximum load)*1 Keyence xg-7701p Multi-Camera Image Processing System/Controller TC23096 Bi-telecentric lens for 2/3" detectors, magnification 0.093 x, C-mount Magnification (×) 0.093 Image circle Ø (mm) 11.0 Max detector size 2/3" Working distance (1) (mm) 278.6 wF/# (2) 8 Typical telecentricity (max) (3) (deg) < 0.06 (0.08) Typical distortion (max) (4) (%) < 0.04 (0.08) Depth of field (5) (mm) 77 CTF 70 lp/mm (%) > 40 Image area of the object (6)     with 1/3″ detector (4.8 x 3.6 mm) (mm × mm) 51.61 x 38.71 with 1/2.5" detector (5.70 x 4.28 mm) (mm × mm) 61.29 x 46.02 with 1/2″ detector (6.4 x 4.8 mm) (mm × mm) 68.82 x 51.61 with 1/1.8″ detector (7.13 x 5.33 mm) (mm × mm) 76.67 x 57.31 with 2/3″ - 5 MP detector (8.50 x 7.09 mm) (mm × mm) 91.40 x 76.24 Dimensions Mount C Phase adjustment (7)         Length (8) (mm) 336.6 Diameter (mm) 143 Weight (g) 2500 Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request! Fsdpfxsg Sxmfs Ag Repb

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Fodpfx Agjd Dc Uno Repb Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57820 and 57821

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: 11182, overall weight: 1,200 kg, Please provide your offer price. Sale only within Europe (EU), including Turkey, United Kingdom, and Switzerland. Technical data available in the handout. Sold without packaging; any warranty rights are excluded. Fsdsw E Iw Ijpfx Ag Repb If you intend to dismantle the system yourself, please indicate this in your offer. We assume no liability for the accuracy of the technical data, the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Condition: used, Year of construction: 2005, operating hours: 22,245 h, functionality: fully functional, machine/vehicle number: ENZ 6CAL, Equipment: CE marking, Used, Working environmental chamber, ESPEC ENZ-6CAL, Air cooled, temperature only, -70C to +150C, 8C per minute cooling, Internal dimensions (W,D,H) 600mm, 743mm, 850mm. Comes with calibration. Fpedpjwy Uqwsfx Ag Reb

Condition: excellent (used), Lindner Bursting Test Stand Here we offer a Lindner burst test stand. AGB Bursting Test Stand TMM4 Technical data: AGB Bursting Test Stand TMM4 Year of manufacture 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5,5 kW Temperature range chamber: RT ... 180°C Temperature range medium: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Fjdpolx A T Dsfx Ag Repb Test medium: glycol / water Heat transfer oil Fragoltherm Q-HTF Dimensions: length 2150 mm x width 1050 mm x 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz power: 5,5kW rated current: 8A Back-up fuse: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY For the commissioning of the burst test bench the following items are necessary: Pump, cooling tower & fire alarm panel these are not supplied. Type: AGB burst test rig TMM4 weight approx. 705 kg Condition: used / used Scope of supply: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Testing system for measuring tensile and compressive forces up to 100 kN Fjdpfjqtrkdsx Ag Ropb Manufacturer: Zwick Type: 7045.370.1a Materials testing machine Tensile and compressive forces up to 100 kN PC Software: testXpert testing software Documentation: Basic program for tensile and compression testing Zimt command interpreter Instruction manual Cards & Modules: Zwick ZPS 7095.1 Rev.: d Power supply unit Zwick ZPU 7095.2 Rev.: j Central processing unit Zwick ZAST 7096.4 Rev.: f Drive control unit Sieb & Meyer AC-Servo 26.39.2 AC-Servo module Dimensions: Height: 3200 mm Width: 1120 mm Depth: 620 mm Weight: 1140 kg Modernization of the Frank machine 81120 1995 Cost: 113,000 DM Modernization of the universal testing machine with digital measurement and control electronics Additional slots for 3 connection cards Remote control for extended control of the testing machine during setup and test execution Measuring amplifier (TF) for force or analog length change Connector for voltage measurements (e.g., single strain gauge with preamplifier), without calibration Connector for strain gauge transducers for force or displacement measurement, without calibration Control unit with IEEE 488 bus card ZIMT program for calibrating the force transducers in conjunction with the DK 38 MGT 32 S 71 (0 ... 10 V output) and the Keithly 182 digital multimeter Program sequence: 10 calibration steps under load or unload Files are available in the ASCII file Drive unit for the Frank 81120 AC Motor Resolver with motor plate Find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), KSE Leak Test Bench Here we offer a KSE leak test bench. Test bench for automotive Testing of electric drives Isolatio/Tightness E-Motors Supply voltage: 400 VAC Control voltage: 24 VDC Connected load: 0,75 kW Type: KSE I/SB-3 Condition: used / used Scope of delivery: (see picture) (Changes and errors in technical data, specifications are reserved!) Fpsdpfsiu H Hcex Ag Rjb Further questions we can answer on the phone for you.

Condition: excellent (used), Zwick Fpsdpjfnm Dqofx Ag Rsb Type: BZ2.5/TN1S Zwick table testing machines Tensile strength measuring machine Area of application: Wide range of applications, from plastic and elastomer testing to paper, textile, foam and wire to component testing. Load frame: Max. test force FN in tension/compression direction 2.5 kN Height (h1) approx. 770 mm Width with electronic unit 320 mm Depth with electronic unit 414 mm Height of the work area h min ... h max: Traverse angle mounted upwards 227 ... 573 mm Traverse angle mounted rotated by 180° 57 ... 403 mm (each without connection bolt) Connection values: Electrical connection 115/230 V 4/2A-1PH/PE/N Power consumption 0.4 kVA Mains frequency 50/60 Hz 2.5 kN Condition: used Scope of delivery: (see image) (Changes and errors in the technical data, information are reserved!) We will be happy to answer any further questions you may have over the phone.

Year of construction: 2002, condition: used, SECOND-HAND HYDRAULIC CLAMP WITH FOLDING BENCHES RODEA MOD. S - CE RULES Fedpfx Agswr A Sto Ropb - Year 2002