Hydraulic guillotine shear

Safan M Shear 430 6 TS200

Condition: used, functionality: fully functional, Year of construction: 2008, Used RAS 86.33 swing-beam guillotine shear with newly ground upper and lower blades, always serviced and rarely used. Technical specifications: Year of manufacture: 2008 Weight: 6,800 kg Max. sheet thickness at 400 N/mm²: 6.3 mm Working length: 3,190 mm Stop depth: 5-1,000 mm Working height: 800 mm Stroke rate per minute: 30-64 N/min Connections: 400 V / 50 Hz / 40 A 3 PE / three-phase AC Power consumption: 18.5 kW Machine width: 3,830 mm Machine depth without angle stop: 2,195 mm Machine depth with angle stop: 3,275 mm Machine height: 1,725 mm Air pressure: 5 bar Frame overhang: 100 mm Hodov Tk Exopfx Anvenn Tank capacity: 150 l

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear Hedpsxabkbefx Anvjnn - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Machine weight approx.: 10,100 kg Hjdpoxu Nc Isfx Anvonn

Condition: good (used), Year of construction: 2016, KEY ADVANTAGES • Hybrid printing system combining offset and flexographic printing • Large printing width of 670 mm for versatile label and packaging formats • Wet-on-wet offset technology for excellent print quality • Flexographic units for coatings, varnishes, and special applications • Explosion-proof flexographic units suitable for solvent-based applications • Automatic print register ensuring high production accuracy Typical applications include: • Pressure sensitive labels • Wrap-around labels • Shrink sleeve labels • Flexible packaging • Laminated packaging materials _____ TECHNICAL DATA Manufacturer Omet Model Varyflex V2 670 Year of manufacture 2016 Printing width 670 mm Machine type Hybrid printing press (offset / flexo) Current counter approx. 27,500,000 linear meters Machine condition In production Location Europe _____ CONFIGURATION • Unwinder 1000 mm unwinder Double-sided corona treatment Double-sided web cleaning system Hnjdpfxoytgt Ns Anvsn Printing system • Offset units 5 wet-on-wet offset printing units Flexographic units • 1 flexo unit with cooled UV curing cylinder • 1 flexo unit with cooled UV curing cylinder • 2 vertical flexo units with cooled cylinders • UV or hot air drying system • Explosion-proof enclosure Drying system • Cooled dryer cylinder with two UV lamps Additional equipment • Web reversing unit • Automatic print registration system _____ MACHINE CONDITION • Machine currently in production • Well-maintained industrial printing equipment • Inspection possible by appointment • Reliable system suitable for continuous industrial production _____

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Hnodpfxou Icnfe Anvon Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge *

Condition: used, Swing bending machine with additional segmented upper tool, gooseneck rail. Swing bending press brake FASTI type 2095-25-2.5, serial no. 94 295 004, year of manufacture 1994. Working length 2540 mm, max. sheet thickness 2.5 mm, upper beam stroke 380 mm, bending beam motor power 2.2 kW, power supply 400 Volt, 50 Hz. - NC control FASTImatic FM100 - one-piece sharp rail 135° - additional segmented upper tool, gooseneck rail - controlled backgauge - continuous stop rail - controlled bending angle via control - electric foot switches. Weight 3000 kg. In good condition. Hnodsttc Uaopfx Anvsn

Condition: used, Cutting length: 3100 mm Steel cutting capacity: 12 mm Backgauge: 1000 mm Hnjdpfjxuh Ipox Anvon

Condition: new, 60 degree press brake punch H115mm for Amada/Promecam/Durma/Baykal/Ermaksan/Mvd/Denner/SBD Hnedpskt Nu Ujfx Anvsn

Condition: excellent (used), Year of construction: 2007, Technical specifications: Hedpsywd Ndjfx Anvsnn Max. cutting width: 4050 mm Max. cutting capacity for steel (ST40): 8.0 mm Max. cutting capacity for stainless steel: 6.0 mm Max. cutting capacity for aluminium: 8.0 mm Motorized adjustable backgauge: 1000 mm Cutting gap adjustment Cutting angle adjustment: 2.2° Sheet support device Motor power: 15 kW Dimensions (L x W x H): approx. 4800 x 2200 x 2150 mm Weight: approx. 11.5 tons The seller is not liable for typographical or data transmission errors. The machine is in condition, technically and visually, corresponding to its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Year of construction: 2013, Sheet width: 3050 mm Sheet thickness: 10 mm Cutting angle: 1-4 ° Backgauge – adjustable: 10 - 1000 mm Number of hold-downs: 13 pcs Distance from lower blade to hold-down: 25 mm Hold-down diameter: 60 mm Oil volume: 240 l Max. strokes: 24 per min. Total power requirement: 15 kW Machine weight approx.: 6300 kg Space requirements approx.: 4100x3800x2000 mm Equipment: -Accessories: -Operating hours: 6,089 h -Angle gauge -3 material support arms -NC control Elgo -Automatic cutting angle adjustment Hsdpfxoy H Imrj Anvjnn -Electric backgauge 1000 mm -Foot pedal -Light curtain behind the machine -Cutting line illumination