Used Hydraulic Pipe Bender for sale (16,881)

Year of construction: 2001, condition: ready for operation (used), This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information. • Plastic-metal composite pipe system • Pipe diameter 14, 16, 18, 20 mm • Material LDPE-MDPE-HDPE, silane-crosslinkable PE • Diffusion barrier aluminium thickness 0.15 - 0.4 mm Dcodpfx Agex I S N Hjked • Line speed max. 40 m/min. • Axle height 1000 mm

Year of construction: 2025, condition: new, New plastic pipe extruder machine with down stream pipe PE 100 or HDPE starting pipe diameter from 20mm till 65mm Dedeyguzhepfx Agkocd

Condition: used, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Dodpeyrhyusfx Agkecd Integrated hydraulic unit With punching saddle for dies no. 3 and 4, up to Ø 39.5 mm Quick-change device for punches 3 and 6 up to Ø 39.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: used, functionality: fully functional, Year of construction: 2012, Hydraulic Guillotine Shear Make: DURMA Model: VS 3000x16mm Year: 2012 Technical Specifications Manufacturer: DURMA Model: VS 3016 Year of Manufacture: 2012 Cutting Length: 3080 mm Sheet Thickness: 16 mm Stroke: 175 mm Oil Tank: 500 liters Dimensions: approx. L 3.95 x 2.30 (plus 1000 mm backgauge) x H 2.70 m Total Weight: 17.3 t Equipment • Backgauge 1000 mm Djdpfx Aeyplc Usgkecd • Support arms • Square arm 1000 mm • Rear safety light curtain • Automatic blade gap adjustment • Automatic cutting angle adjustment • 1000 mm folding hand guard • Cutting edge illumination All information without guarantee. A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 2004, machine/vehicle number: 03104474, fuel type: diesel, Empty weight: 15.500 kg Lifting capacity: 1.000 kg Working height: 2.300 cm Dcsdpfxsya T D Io Agked Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Transport dimensions (LxWxH): 5.75x2.5x3.2 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2004, operating hours: 5,913 h, machine/vehicle number: 03104313, fuel type: diesel, Empty weight: 15.500 kg Lifting capacity: 1.000 kg Working height: 2.300 cm Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Dcodpox Dqpuofx Agkod Tyre brand: - Transport dimensions (LxWxH): 5.75x2.5x3.2 Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2008, operating hours: 3,374 h, machine/vehicle number: 1200018435, fuel type: diesel, Empty weight: 24.680 kg Lifting capacity: 1.000 kg Working height: 2.830 cm Djdpfx Agsya T A Rokjcd Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 7.15x2.5x4.2 Please contact PFEIFER GROUP for more information

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Our cantilever hydraulic press is a professional machine designed for precise and demanding machining tasks. Thanks to its cantilever construction, it provides easy access to the working area, allowing for the processing of larger components and convenient material handling from multiple sides. Main features: - High pressing force – ideal for bending, straightening, pressing, or assembling components. - Cantilever design – improved ergonomics and accessibility of the workspace. - Sturdy steel frame – guarantees durability and user safety. - Precise hydraulic control – smooth adjustment of force and operating speed. - Industrial and workshop applications – perfect for large manufacturing plants as well as smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries: from automotive and metalworking to technical service centers and tool shops. Specifications: - Pressing force: 1000 kN - Maximum pressure: 25 MPa - Maximum opening: 600 mm - Stroke: 300 mm - Table dimensions: 700x500 mm - Throat depth: 250 mm - Descent speed: 11 mm/s - Lifting speed: 25 mm/s - Motor power: 5.5 kW Dcjdpfjyrr Rksx Agkjd Delivery available. Delivery cost calculated individually by the transport company.

Condition: used, Year of construction: 2001, - Year of manufacture: 2001 Specifications - Cutting length: 3100 mm - Capacity: 16 mm - Stroke: 170 mm - Strokes per minute: 10 - Oil tank: 410 l - Motor power: 37 kW - Operating voltage: 400 V - Rated current: 72 A - Main fuse rated current: 100 A Dcodpfoxa Aclox Agkjd - Dimensions (W x H x D): 3750 x 2400 x 3425 mm - Weight: 13800 kg

Condition: new, Year of construction: 2024, neu 2024 7305 prompt, Zwischenverkauf v Italien 46400 € 886.24 € 1 100 to 500 mm 700 x 350 mm 800 x 600 mm 500 mm 300 mm 25 mm/s 4 mm/s 4 kW 1900 mm 1200 mm Dcjdpfjwiry Ijx Agksd 2600 mm 2100 kg 2-fold round guidance table and ram with T-slots 2 hand operation Siemens PLC manometer users manual incl. pressure switch

Condition: used, Year of construction: 2002, sheet width 3050 mm plate thickness 6 mm rear stop 1000 mm cutting angle 0,5 - 3 ° down holder 18 Stk no. of strokes 9-17 Hub/min total power requirement 7,5 kW dimensions of the machine ca. 3800 x 2000 x 1600 mm weight 4500 kg Equipment: Dcedpfx Asyrhvvogksd - electric backgauge - electric cutting angle adjustment - manual cutting gap adjustment - SP 9 control unit - Safety guard behind the machine incl. light barrier - front finger guard - 1x side stop - operating instructions

Condition: excellent (used), Year of construction: 1992, Hydraulic press brake Fab. DARLEY Type. EHP 150 - 43/37 Very good condition, year 1992 Technical data Make: DARLEY Type: EHP 150 - 43/37 Dedpfoh U A Ibox Agkecd Year of manufacture: 1992 working length: 4300 mm power: 150 t distance machine column: 3700 mm ram stroke: 175 mm Engine power: 11 kW Dimensions: approx. L 4.7 x W 1.6 x H 3.1 m (transport height 2.85 m) Weight: approx. 16 t Equipment: - Control Delem DA 58 - Block die: V14, V60, V40, V24, V12, V30, V22, V10 - Punch straight height 195 mm, segmented - 2. punch cranked height 195 mm, segmented, length 4.000mm - controlled axes: Y1, Y2, X, R, Z - motorized crowning - 2 support arms - operating instructions + test books All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 1994, Hydraulic guillotine shear Fab. HACO Typ. HSLX 3000x6/8mm Year 1994 Technical data Make: HACO Type: HSLX 3006 / 8 Year of manufacture: 1994 sheet width: 3050 mm sheet thickness: 6 mm / 8 mm on 1000 mm sheet length cutting angle: 0.5 - 3 number of strokes: 9/17 drive motor: 11 kW number of hold-downs: 18 pcs. space requirement: approx. 3,7 x 1,7 /additional lay-on arms) x 1,6 mm Machine weight: approx. 6 t Djdpfx Aolp Nrbogkocd Equipment - autom. cutting angle adjustment - Automatic cutting gap adjustment - Cutting line illumination - Support arms - Knife with 4 cutting edges - Cutting length limitation - CNC backgauge 705mm adjustment range 705 mm - angular stop - Instruction manual All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2002, operating hours: 2,376 h, machine/vehicle number: 2103736, fuel type: diesel, Empty weight: 14.800 kg Lifting capacity: 1.000 kg Working height: 2.250 cm Front tyres / undercarriage remaining: 60 Dcedpfjyrl Ucjx Agkjd Rear tyres remaining : 60 Tyre brand: - Transport dimensions (LxWxH): 5.74x2.55x4.1 Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2001, control type: NC control, number of rollers: 4, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller length: 3,100 mm, working width: 8 mm, sheet thickness (max.): 8 mm, overall weight: 8,200 kg, total length: 6,200 mm, total width: 1,800 mm, total height: 3,900 mm, power: 8 kW (10.88 HP), Rolling width: 3100mm Rolling thickness 3x toproll Ø:10mm Rolling thickness 5x toproll Ø:14mm Rolling thickness prebending: 8mm Top Roll Ø: 290mm Bottom Roll Ø: 270mm Side roll Ø: 250mm Number of rolls: 4 Rolling speed: 1 - 5 Top support: yes Power: 8kW Length: 6200mm Width: 1800mm Dedpfjygvwdex Agkocd Height: 3900mm Weight: 8200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2024, neu 2024 7321 prompt, Zwischenverkauf v Türkei 12500 € 216.96 € 1 11300 € Dcedpfjwiqp Uex Agksd 150 to horizontal verschiebbar 300 mm 1570 mm 280x200 mm 5 mm/s 10 mm/s 2630 mm 1000 mm 2480 mm 2100 kg horizontal adjustable cylinder with clamping lever steel welded frame stop at any position pressure manometer safety valve against overloading 2 V-blocks table height adjustable table up-down movement attachment control by operating lever according to CE regulations user manual in GERMAN and ENGLISH

Condition: not inspected (used), Year of construction: 2022, functionality: unexamined, machine/vehicle number: 792-1017, table width: 300 mm, table length: 300 mm, stroke length: 20 mm, operating pressure: 6 bar, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Dcsdoyn Ef Hjpfx Agkjd Maximum working pressure: 0.6 MPa / 6 bar Air consumption: 30 l/stroke Stroke: 20 mm Table dimensions: 300 x 300 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 700 x 500 x 1150 mm Machine weight: 150 kg Note: The pressing tool is not included in the scope of delivery. External reference: Groven - Lot 11

Condition: not inspected (used), functionality: unexamined, overall weight: 100 kg, total height: 200 mm, jaw width: 160 mm, total length: 700 mm, total width: 160 mm, No reserve price – guaranteed sale to the highest bidder! By placing a bid you commit to timely collection either between 11 May 2026 and 13 May 2026 or between 18 May 2026 and 21 May 2026! TECHNICAL DETAILS Dcedeyn Dffspfx Agksd Jaw width: 160 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 700 x 160 x 200 mm Weight: 100 kg External reference: Lot 26 / Wittner

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,496 h, clamping force: 600 kN, screw diameter: 35 mm, Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 600 kN This Engel Victory 200/60 TECH was manufactured in 2003. It features a screw diameter of 35 mm, clamping force of 600 kN, and an opening stroke of 450 mm. The machine includes a robot and has a maximum platen spacing of 700 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/60 TECH machine we have for sale. Contact us for more information. Dedpfx Asx D Dkxogkjcd Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2003, operating hours: 72,069 h, Injection Unit Screw diameter 90 mm Dedex D Eblopfx Agkecd Clamping Unit Clamping force 5500 kN This Engel CL 4550/550 was manufactured in 2003. It features a screw diameter of 90mm, a closing force of 5500kN, and an opening distance of 700mm. Mold installation height ranges from 250mm to 850mm, and the plant size is 1200x1200mm. Includes a robot but excludes water temperature control equipment and conveyor belt. Contact us for more information about this machine. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2018, operating hours: 58 h, General Data Measurements width 4360 mm Measurements depth 1718 mm Measurements height 3910 mm Machine weight 7600 kg Injection Unit Screw diameter 35 mm Injection pressure 2500 bar Clamping Unit Clamping force 1000 kN This Arburg ALLROUNDER 1200 t 1000 - 400 Injection moulding machine was manufactured in the year 2018 in Germany. It has 58 production hours. The machine has a clamping force of 1000 kN, machine like new, used only for testing. Machine needs to be CE certified by the customer, we have a quote from a third party starting at 2.000€. Djdpfx Asx D Nc Hegkjcd Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2001, General Data Measurements height 405 mm Dimensions Machine Length 405 mm Clamping Unit Clamping force 800 kN This Krauss Maffei 80-220 C1 was manufactured in 2001. It features a clamping force of 800kN and a mold opening force of 55kN. The machine includes a robot, although it has a vacuum malfunction. Ideal for those looking to enhance their production capabilities in injection moulding. Contact us for more information about this machine. Application Types Dcedpfx Asx D Ea Ijgkod Injection Moulding

Condition: ready for operation (used), Year of construction: 2001, Injection Unit Dsdpfx Agex D Ecvskscd Screw diameter 55 mm Clamping Unit Clamping force 2500 kN This Engel ES 1050/250 HL-V was manufactured in 2001. It features a screw diameter of 55 mm, clamping force of 2500 kN, and an opening stroke of 850 mm. The tool mounting platen measures 1050 x 650 mm, and it includes a robot. Consider the opportunity to buy this Engel ES 1050/250 HL-V hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 1998, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates Dedpeyq Szmefx Agkjcd - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions

Condition: ready for operation (used), Pipe Pump, Screw Pump, Dickow Pumpen KG 84478 Waldkraiburg Overall Dimensions: 3800 x 720 x 720 mm Electrical Specifications: 400 V, 50 Hz, 2888 RPM, 1.28 kW Lift Height: 15 m Rated Capacity: 10 m³/h Dcsdpfovgw Dusx Agksd