Used Die Bending Machine for sale (66,554)

Condition: used, CNC press brake FASTI type 904-125/30 serial no. 95-904-5775 year of construction 1995 Pressure capacity 125 ton. Working length 3050 mm Stroke approx. 335 mm Stand projection 300 mm Clearance between the side uprights 2550 mm Tool installation height max. 465 mm (opening width between the tool holders) Table width 90 mm (the clamping system is mounted on the table) Table height above floor 875 mm (910 mm with clamping system) Backgauge X-axis 500 mm Backgauge R-axis 115 mm Backgauge Z-axis approx. 1950 mm Lowering speed Y rapid traverse 90 mm/s Lowering speed Y-operation 8.9 mm/s Return stroke speed Y-retraction 75 mm/s Oil filling approx. 160 liters Motor power 18.5 kW Mains connection 400 Volt, 50 Hz, 20 Amp. - 7-axis CNC control DELEM type DA 58 with LCD screen - 1 axis for back gauge - stop depth (X-axis) - 2 axes for back gauge - fence height (finger R1 + finger R2) - 2 axes for back gauge - stop finger, laterally movable (finger Z1 + finger Z2) - 2 axes for press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and 2-hand control panel or 2-hand control panel only - Hydraulic tool clamping for the TRUMPF upper tool system, with 20 mm clamping groove - Hydraulic tool clamping for the lower tool with 13 mm table groove, depth 21 mm (tool pin 13 x 20 mm) - FIESSLER safety light barrier, type AKAS - 2 material support arms at the front, manually movable to the side and height-adjustable - Electrical diagram, hydraulic diagram, user manual for control available - Control cabinet on the machine - without tools Space requirement L x W x H 5000 x 2500 x 3050 mm Dedjhmmfkjpfx Abxoup Transport dimensions L x W x H 5200 x 1900 x 2950 mm Weight 8.5 tons. Good condition

Condition: used, 12-piece die block for GEWA press brake Bending tool for press brake, lower tool Type: 0255/14 V-block size: 16 mm for 90° V-block angle: 88° Die depth: approx. 8 mm Height: 120 mm Max. pressure per meter: 100 t/m Duedpfxowbvmie Abxop Die base width: 60 mm Total length: 4175 mm Segment lengths: 4 x 835 mm, 1 x 400 mm, 1 x 200 mm, 1 x 100 mm, 1 x 50 mm, 1 x 40 mm, 1 x 20 mm, 1 x 15 mm, 1 x 10 mm Weight: 110 kg Very good condition

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Djdpfx Aoya Iaqjbxsup Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: used, Servo press brake SAFAN Type SMK-P 50-2550 TS1 Serial No. MK 285 Year of manufacture 1998 CNC Control SAFAN Software Version 5.07 TS1 Pressing force 500 kN (50 tons) Working length 2550 mm Stroke 215 mm Dsdsxpqy Dspfx Abxsup Clearance between side frames 2700 mm Tool installation height max. 414 mm Table width 55 mm Table height above floor 950 mm Approach speed approx. 75 mm/s Return speed approx. 75 mm/s Working speed approx. 1.6 to 15 mm/s Motor power 9 kW Power supply 400 Volt, 50 Hz, 9 kW - 4-axis CNC control SAFAN Software Version 5.07 TS1, Y1 and Y2 axis for press beam - 2-axis back gauge: X-axis (depth adjustment), R-axis (height adjustment) - 2 back gauge fingers, lateral manual adjustment (Z1, Z2) - Press beam driven by 2 servomotors and belt drive - Infinitely variable working speed - Operation via electric foot switch and/or two-hand control panel - 13 clamping holders for upper tool UKB system, Type 50.571 (UKB System A) - Tool mount for lower tool: 55 mm wide with 13 mm slot, slot depth 21 mm (Trumpf system or UKB System B) - Without press brake tools (new tool set from UKB costs approx. EUR 3,600 net) - Total recorded operating hours = 8,120 h - Work strokes 1,049,789 Space requirement (L x W x H): 3450 x 1850 x 2650 mm Weight 5,000 kg Good condition

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length Dujdow Iq Ugspfx Abxjp - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: new, functionality: fully functional, Year of construction: 2025, throat depth: 400 mm, warranty duration: 24 months, Model: GB-4016E Bending pressure (KN): 400 Bending length (mm): 1600 Distance between columns (mm): 1320 Maximum opening height (mm): 430 Slider stroke (mm): 180 Throat depth (mm): 400 X-axis stroke (mm): 400 X-axis speed (mm/s): 400 R-axis stroke (mm): 140 R-axis speed (mm/s): 200 Z-axis stroke (mm): 1040 Z-axis speed (mm/s): 400 Machine power (kw): 17.2 Dsdpfswzqx Hjx Abxsup Dimensions (mm): 2090*1265*2290 Weight (kg): 3500

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender Dsdowk Rlxopfx Abxsup roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 925307, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: roundo, number of rollers: 3, input current: 380 A, input frequency: 50 Hz, Equipment: CE marking, emergency stop, hardened rollers, Roundo R5S used condition , working 100% . Base in Thailand . Dodpfx Asyqxmvjbxoup

Condition: new, Year of construction: 2020, Electric elbow making machine is the mechanism for forming elbow from round and rectangular pipes with different diameters. Elbow making machine EEM-200plus is the better version of EEM-200 machine. It has additional fourth bottom pressing tool so it presses pipes from all four sides while bending and provides better quality of elbow. You can use our machine for working with round pipes as with rectangular pipes. Elbow making machine EEM-200plus lets you to work with pipes from 80 to 200mm. Pay attention: Inside diameter of the pipe you use for bending has to be 1mm bigger than bending matrix of the machine!! The lock of the pipe has to be closed or welded to avoid opening of pipe while bending!! Elbow making machine EEM-200 is electric so it doesn’t need any air or oil system to work. Electric consumption is 1.5 kW/hour for this elbow machine. The needed voltage is 380V. It could be used in environment with temperature from -5 to +45 Celsius degrees. Elbow making machine is good for bending pipes with maximum thickness 0.8mm. Elbow making machine EEM-200plus bends elbows thank to special pressing tools. There is one set of tools for bending one diameter of pipe you need. So to bend more diameters of pipes you have to get additional pressing tools. Duodpjf Epznofx Abxep It goes four pressing set tools with the machine so you can bend four diameters of pipes with it in the range from 80 to 200mm (that you choose by your own)

Year of construction: 2001, condition: ready for operation (used), overall weight: 3,750 kg, total height: 1,600 mm, product length (max.): 4,700 mm, number of axes: 6, General Data Machine weight 3750 kg Measurements height 1600 mm Dedpfx Aox Hbk Robxeup Main Drive Number of axis 6 Bending length 3000 mm Dimensions Machine Length 4700 mm This 6-axis PEDRAZZOLI Bend Master 42 MRV IMS CNC was manufactured in 2001. It features a max tube diameter of 42 mm, a min tube diameter of 6 mm, and a max bending radius of 270 mm. With a power of 22 kW and a bending length up to 3000 mm, consider the opportunity to buy this PEDRAZZOLI Bend Master 42 MRV IMS CNC roll bending machine. Contact us for more information about this machine. Application Types Bending

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, control type: manual, Maximum bending length: 2000 mm Maximum sheet thickness: 1.5 mm Segmented upper bending edge. Manual adjustment of the bending angle up to the stop. Bending: manually operated Manually adjustable rear stop. Dedpfx Aeyr Rcfobxsup Weight: 990 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Max. bending diameter: Ø 76 mm Max. pipe wall thickness: 3.0 mm Max. bending length: 6000 mm Min. bending angle: 0.1° Max. bending angle: 190° Max. bending radius: 260 mm Operating speed Rotation speed: 200°/second Bending speed: 30°/second Feed speed: max. 1000 mm/second Tolerances: Rotation (°): ±0.1° Bending (°): ±0.1° Feed (°): ±0.1° Hydraulic system: Hydraulic motor power: 7.5 kW Max. hydraulic pressure: 180 bar Hydraulic oil: 120 liters Rated power: 44 kW Voltage: 400 V AC Dimensions L x W x H: 8900 x 1200 x 1850 mm Weight: 4850 kg Description: Materials: Steel | Stainless steel | Aluminum | Brass | Copper and other flexible materials for simple to complex shapes Display: Portable 15-inch color touchscreen monitor Control panel: Servo and hydraulic motion control, plus selectable servo axis speed Foot pedal User-friendly AKYAPAK control software Hydraulic system: Bosch, Parker Operating modes: Manual, semi-automatic, and fully automatic Programming: Y-B-C or X-Y-Z mode Cooling system: Hydraulic oil cooler Pipe clamp: Hydraulic Industrial PC: Pentium processor, 256 MB RAM, hard drive, and floppy disk drive Lubrication system: Automatic Control: PLC-based Dedpfx Aoyr N Erobxeup Rotary axis: Servo-controlled Bending system: Hydraulic Auxiliary axes: Hydraulic Forward and reverse movement: Manual Pipe length calculation: Automatic, according to program Workpiece display: 3D 360° graphic display

Condition: like new (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, overall weight: 56,000 kg, Clamping force: 11.168 kN Clamping force: 1.138 Ton Ejection force: 433 kN Max. die height: 1,050mm Min. die height: 450mm Plate dimensions HxV: 1.620 x 1.620mm Tie bar spacing: 1.000 x 1.000mm Tie bar diameter: 200mm Movable platen stroke: 960mm Ejection stroke: 230mm Djdpfx Abou Svacjxsup Working pressure: 180 bar Dry Cyclyng: 2.5 n/1" Pump motor power: 45kW Machine weight: 56T Machine dimensions: 10.8 x 4.5x 4.3m

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 134000 € 2532.6 € 3100 mm 25 mm 25 mm 20 mm 20 mm 20 mm 16 mm 360 mm 360 mm 270 mm 60 mm 1510 mm 22 kW 5560 mm 2060 mm 2050 mm 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing Duedpfx Absypbquoxep moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 70300 € 1328.67 € 3100 mm 8 mm 8 mm 6 mm 6 mm 5 mm 240 mm 240 mm 190 mm 825 mm 11 kW 4880 mm 1160 mm 1200 mm 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: Duedpoypbqnsfx Abxjp the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 95000 € 1795.5 € Djdpeypbqhefx Abxoup 3100 mm 13 mm 12 mm 8 mm 13 mm 10 mm 10 mm 8 mm 270 mm 270 mm 230 mm 50 mm 1155 mm 15 kW 5310 mm 1660 mm 1590 mm 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 62600 € 1183.14 € 2050 mm 13 mm 10 mm 13 mm 10 mm 10 mm 8 mm 240 mm 240 mm Djdpfxjypbqbo Abxeup 190 mm 820 mm 11 kW 3830 mm 1160 mm 1200 mm 5000 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: new, neu ca. 2 Wochen ab Auftragse Italien Djdpeypbp Rsfx Abxjup 2000 mm 11 mm 11 mm 7 mm 8 mm 6.4 mm 225 mm 215 mm 165 mm 8 m/min 3950 mm 1200 mm 1200 mm 4450 kg Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear guide for the movement of the lower rolls Ultra wide rolls blocks "MCS" bearing system for the lower rolls (4 large bearings on each shaft) Central lubrication system Pressure manometer for constant pinch roll control Extra torque and special braking system Safety cord with emergency stop Equipped according to "CE" regulations OPTION: CNC control Siemens PSG-Absolute with 15" touch screen (automatic calculation of the process for simple and complex shapes)

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 83800 € 1583.82 € 2550 mm 15 mm 15 mm 13 mm 12 mm 12 mm 10 mm 270 mm 270 mm 230 mm 50 mm 1155 mm 15 kW 4760 mm 1660 mm 1155 mm 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device Dsdpfjypbp Dox Abxjup hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended

Condition: ready for operation (used), - USED - MANUAL DIE SINKING EDM MACHINE    Dusdpfxeyru N Ns Abxsp X-AXIS TRAVEL: 400 mm Y-AXIS TRAVEL: 250 mm Z-AXIS TRAVEL: 200 mm TANK SIZE: 800 x 500 x 400 mm

Condition: good (used), Heidelberg Cylinder S 54×72 Automatic Die-Cutting Machine This machine is in production and ready to go. Format: 540x720mm Dusdpfx Abjymxkasxsp The machine is ready for die-cutting. Fully automatic, central lubrication. Includes mounting frame, cylinder plate, carriages, and a set of fillers and locks.

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 55900 € 1056.51 € 3100 mm 9 mm 8 mm 7 mm 7 mm 5 mm 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW 5350 mm 1600 mm 1470 mm 6850 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Duedjyb Sz Iepfx Abxep Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 48100 € 918.71 € 2550 mm 9 mm 9 mm 7 mm 7 mm 5 mm 220 mm 220 mm 160 mm 1,5 / 6 m/min 5.5 kW 4900 mm 1150 mm 1250 mm 4600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules Dodpsyb Sywefx Abxoup OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, Year of construction: 2024, neu 2024 Duedpfx Aeyb Szhjbxsp 9729 prompt, Zwischenverkauf v Türkei 28450 € 488.96 € 1 25600 € 1550 mm 7 mm 7 mm 4.5 mm 4.5 mm 3.5 mm 150 mm 150 mm 130 mm 1,5 / 6 m/min 4 kW 3750 mm 960 mm 1100 mm 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 49900 € 953.09 € 2050 mm 13 mm 13 mm 10 mm 10 mm 8 mm 245 mm 245 mm 180 mm 1,5 / 6 m/min 7.5 kW Dodpfxsyb Sydj Abxoup 4300 mm 1600 mm 1470 mm 5450 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length Hardened rolls are recommended