Used Hydraulic for sale (16,212)

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Fpsdevbdyfepfx Aatol Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: good (used), Year of construction: 1995, operating hours: 1 h, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf Fsdpfx Aajzzdb Ejtspl

Condition: used, Year of construction: 2022, sheet width 3100 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 mm down holder 14 Stück Fedpjxab I Hsfx Aatepl no. of strokes 13 Hub/min cutting angle 2.0 ° throat 350 mm back stop - adjustable 1000 (+) mm oil volume 260 ltr. engine output 22.0 kW weight 10.575 kg range L-W-H 4100 x 2400 x 2170 mm Demonstration/demo machine (!!) from our exhibition (like NEW) with very few operating hours ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, pressing force: 630 t, table width: 2,500 mm, table length: 1,600 mm, overall weight: 1,00,000 kg, Equipment: safety light barrier, Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Fodjv Hp T Uopfx Aatspl Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Müller ZE 625 4 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 2013, operating hours: 9,214 h, lifting height: 3,500 mm, fuel type: diesel, motor manufacturer: Diesel, gearing type: automatic, Still RX70-35 diesel forklift, year of manufacture: 2013, operating hours: only 8,413h! Previous owner: German Armed Forces. Rated lifting capacity: 3,500kg. Lifting height: 3,500mm. Duplex mast. Twin tyres on front axle. Fork length: 2,400mm. Hydraulic sideshift. Full cabin. Diesel engine: [30kW/41hp]. Weight: 5,034kg. Good condition! Immediately operational! Upon request, we can provide you with a leasing or financing offer. Mr. Mihm (Tel. ...) will be happy to assist you. Further information available on our website. Subject to prior sale and errors excepted. Cabin = Further information = Fpjdpfx Aajzz U Txetjl Lifting capacity: 3,500kg Overall height: 250 cm For further details please contact Tobias Ebert.

Condition: excellent (used), Year of construction: 1990, input voltage: 200 V, type of input current: three-phase, pressing force: 5 t, stroke length: 150 mm, reverse speed: 360 mm/s, table width: 400 mm, table length: 340 mm, overall weight: 400 kg, working height: 385 mm, Equipment: safety light barrier, Hydraulic press JAM HYP-505H press machine in excellent condition for sale Manufacturer JAM HYP-505H model Model year 1990 Capacity 50KN (5t) Fjdpfx Aowin Emsatepl Stroke length 150mm Open height: 385 mm Table size 400 × 340 mm Punch hole φ25 × 60L mm Plunger approach speed: 260 mm/s Plunger pressure speed: 39 mm/s Ram return speed: 360mm/s Pressure range: 7.7 Mpa Safety light gate Two-hand operation Voltage 3 phase 200v 1.5kw 10A Press body weight: 400kg Operating oil: 25 liters Height (mm) 1070 Width (mm) 670 Length (mm) 1060 If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), Year of construction: 1982, Hydraulic press JKM Kindsmüller UPS 100 E – 110 tons For sale: a hydraulic workshop/industrial press, JKM Kindsmüller, type UPS 100 E. Technical specifications: * Pressing force: 1100 kN (110 tons) * Operating pressure: 283 bar * Stroke of upper piston: 700 mm * Year of manufacture: 1982 Fedjy Unl Rspfx Aatjpl * Control system overhauled/renewed in 1992 * 400 V connection The machine can be inspected by arrangement.

Condition: good (used), Year of construction: 1990, Bending length: 14,000 mm Column width: 10,500 mm Control: CYBELECCNC 7000 with graphic Table width: 1,000 mm Distance between table and press beam: 1,800 mm Controlled axes: Y1; Y2; X1; X2 Fpsdpfx Aozzc Iqsatsl Control system was renewed in 2012 Total power requirement: 75 kW Machine weight approx. min.: 465 t Space requirement approx.: 14,600 x 4,200 x 7,200 mm Additional information - Distance between table and press beam: 1,800 mm

Condition: excellent (used), functionality: fully functional, input voltage: 380 V, total length: 1,200 mm, total width: 800 mm, overall weight: 100 kg, Equipment: documentation/manual, Hydraulic hand grinder, Hydraulic power unit, 80 liters Motor, 4.0 kW, 380V Fpodpfxezv Tags Aatsl Speed control via flow regulator, working speed approx. 2500 rpm Central water supply through the shaft Threaded connection: M 24 Length of hydraulic hoses: 13.0 m Weight of the grinder: approx. 3.8 kg

Condition: good (used), Year of construction: 2008, Cutting length: 3060 mm max. cutting capacity: 8 mm up to 14 strokes per minute manual blade gap adjustment Fpjdpfjyvt Tcox Aatjl backgauge: 750 mm support arms with scale motor power: 15 kW

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: Fpodpfxoxaa I Se Aatel - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 Fodoxab Tvjpfx Aatopl oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: good (used), Year of construction: 1994, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t Fodpfx Aezzczweatspl

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm Fpsdpsycxgmofx Aatsl down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: defective spare-parts repository (used), Year of construction: 1999, machine/vehicle number: REP 01.23, functionality: not functional, pressing force: 1,000 t, table length: 1,000 mm, retraction force: 400 t, Equipment: CE marking, safety light barrier, We are offering this defective REPKON RHHP 100 1000/400 kN hydraulic press with a draw cushion, manufactured in 1999. Manufacturer: REPKON Model: RHHP 100 1000/400 kN Year of manufacture: approx. 1999 Control system defective Fedpezub Nmefx Aatepl If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 1998, AMADA MODEL GPN 630 HYDRAULIC SHEAR PNEUMATIC REA SHEET SUPPORTS ELECTRONIC REAR SAFETY GUARD Max. cutting width: 3050 mm Max. cutting capacity for steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable back gauge: 1050 mm NC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Sheet holding function Strokes per minute: 33 cuts Motor power: 5.5 kW Dimensions (L x W x H): approx. 3800 x 2300 x 1950 mm Weight: approx. 6.5 tons STANDARD EQUIPMENT PROGRAMMABLE MOTORISED BACK GAUGE 2.0 METRE SIDE GAUGE 1.5 METRE FRONT SUPPORTS SHADOW LINE LIGHT AUTOMATIC HYDRAULIC HOLD DOWN CLAMPS CENTRALISED LUBRICATION FOOTSWITCH SHADOW LIGHT BEAM CYCLE COUNTER BLADE GAP AND RAKE ANGLE ADJUSTMENT ONE SET OF BLADES 4 CUTTING EDGES ADJUSTABLE STROKE PNEUMATIC SHEET SUPPORTS HOUR COUNTER AUTO-DIAGNOSTICS Fedpfx Aaeyypb Rstjpl

Condition: used, Year of construction: 1987, sheet width - max. 3035 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU Fpjdpeyyc A Ujfx Aatsl number of strokes - loaded 20 Hübe/min cutting angle 1.7 ° work height max. 900 mm Control ELGO total power requirement 8.5 kW weight of the machine ca. 4400 kg range L-W-H 3416 x 2250 x 1760 mm Equipment: - robust NC electro-hydraulic guillotine shears - NC electro-motorized backgauge * with ELGO control unit "TYPE 85" - Manual cutting gap adjustment - front support table incl. recessed grips - 1x stable side stop, with scale and tilting cam - 3x stable front support arms - 1x freely movable foot switch - front finger guard - Rear metal slide - EMERGENCY OFF button at the front - Operating instructions (PDF)

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T Fjdpfx Aaozwcncotepl

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used 4-meter Safan guillotine shear Type: VS 430 3 Capacity: 4300 x 3 mm Electric back gauge Output stacking system with stacker and high support table Year of manufacture: 1990 Fpedpfxoyu Ig Hs Aatsl

Condition: good (used), Year of construction: 1988, machine/vehicle number: 802107, Offer 26307 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable, motorized 0.5 - 3° - Cutting gap adjustment by hand - Number of hydraulic clamping devices 18 pcs - Motorized rear stop 10 - 750 mm - Front angle stop + support arms - Number of strokes per minute, depending on cutting angle and cutting length 9 - 17 - Hydraulic drive 400 V / 7.5 kW Fsdpfx Aezw Di Ieatjpl - Table height 770 mm - Space requirement including rear stop, excluding front support arms approx. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - including: - Foot switch - Cutting line illumination

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, pressing force: 500 t, stroke length: 400 mm, table width: 1,600 mm, table length: 900 mm, year of last overhaul: 2017, Equipment: safety light barrier, Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dieffenbacher PO 500A press A press in very good technical condition for sale from a liquidated stamping shop in Poland Fsdpfx Aov E Nlzsatjpl Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Hydraulic pump, HAWE high-pressure hydraulic pump unit with 1.1 kW motor (450 bar), Used Machine HYDRAULIC PUMP: Manufacturer / Brand: HAWE Hydraulik (Made in Germany) Type: R 2.5 Nominal Pressure (Pn): 450 bar (high-pressure version) Displacement (V): 1.76 cm³/rev ELECTRIC MOTOR: Fedpfezxxcfex Aatjpl Type / Model: 4AP 90S-4 Power: 1.1 kW (1.5 HP) Operating Voltage: 400/230 V (Y/Δ) Current: 2.7 / 4.6 A Speed: 1410 rpm (50 Hz) Protection Rating: IP54 (S1 continuous operation) Insulation Class: Class F APPLICATION: Ideally suited for high-pressure industrial hydraulic systems, hydraulic presses, workshop pressing applications, tearing and crushing machines, cable lug crimping machines, and other special-purpose machinery requiring high hydraulic pressure. OVERALL DIMENSIONS: Width: 500 mm Depth: 200 mm Height: 290 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 48 h, VERTICAL HYDRAULIC BALER MG 50 TVE Vertical hydraulic baler, model MG 50 T.V.E. 1200x1100x3500h, for compacting and baling soft material scraps such as fiberglass mats or similar. The MG 50 T.V.E. model features a fully enclosed compaction chamber, with both the material loading door and bale extraction door capable of opening. The control panel is mounted on the side of the unit with integrated controls, and is equipped with a 10-meter extension cable to allow for placement away from the baler. The pressing plate is operated by a single cylinder with a 2700 mm stroke and is guided by four lateral sliding rails. Material is loaded from the front. The compaction cycle (press descent and ascent) is automatically activated via push button. - For transportation, the machine is manufactured in three parts: one section is 2000 mm high, one approximately 2300 mm high, and the cylinder, which will be assembled on-site. - Bale tying is preset; it is done manually with the doors open. Via slots in the rear of the chamber, tying can be completed with standard pre-cut wire or strapping. - Bale extraction is carried out by forklift, with special channels at the base for the insertion of fork tines. - The bale extraction door is closed via a handwheel, ensuring safe operation even with elastic materials. A safety microswitch ensures the door is securely closed before pressing. The top loading door features a hydraulic lever closure with machine-mounted controls. - The baler can be placed flush against a wall; only front space is required for material loading and bale removal. - The hydraulic circuit is equipped with an anti-fall safety blocking valve for the press plate. - The machine must be anchored to the floor and is placed above a wash liquid collection tray. Fsdpoyzr Nmjfx Aatepl • Brand / Model: MG 50 T.V.E. 1200X1100X3500H • Pressing force: 50 tons • Pressing pressure on material: 3.8 kg/cm² • Operating pressure: 220 bar • Bale size: mm 1250 x 1150, variable height (min 800 mm, max 1700 mm) • Bale weight: 400–1000 kg, depending on material • Press chamber: mm 1200 x 1100 x 3500 h • Loading opening: mm 1200 x 1800 h • Compactor stroke: 2700 mm, single cylinder • Operation: Automatic by push button • Cycle time (automatic): 130 seconds • Manual ties: No. 5 • Bale ejection: Removal by forklift • Hydraulic power unit: Integrated into press • Motor power: 10 HP – 7.5 kW • Power supply: 380 Volt – 50 Hz • Overall dimensions: mm 2000 x 3500 x 7150 h • Noise level: 78 dB • Press weight: approx. 5000 kg • Certification: CE Condition: • Used hydraulic baler in excellent condition, sold as seen and approved.

Condition: used, functionality: fully functional, Year of construction: 1985, Flatbed trailer CTC SPA RP26S Registered in 1985 3 axles Tires in 40/50% condition Length: 9.68 m, width: 2.5 m, payload: 195 quintals Fsdpfxezzxp Do Aatspl Double hydraulic ramps Good condition Available immediately WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: used, Year of construction: 2010, functionality: fully functional, Used hydraulic hose cutting machine, fully functional and currently in use. Can be inspected on site. Fpedjzphrqspfx Aatjl