Used Impact Wrench for sale (1,150)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21801003760, empty load weight: 4,480 kg, maximum load weight: 13,520 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2014, total length: 10,020 mm, total width: 2,550 mm, tire size: 445/45 R19,5", color: grey, Platform Trailer – Specifications Chassis Fine-grain steel welded construction 1-speed landing leg at the front with straight foot and single-side operation on the right-hand side Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half fenders extending slightly beyond the main frame Rear impact buffers Drawbar Tandem trailer drawbar with certified 50 mm towing eye Nwjdpfx Ameni Udzo Uek Transport version with under-mounted coupling drawbar Axles & Suspension BPW disc brake axles (manufacturer's choice) Air suspension with raise/lower valve Wheels & Tyres 445/45 R19.5 tyres (manufacturer's choice) Steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Front Duomatic connection with connecting line to the towing vehicle Haldex Electronic Braking System (EBS) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality Loading Platform Platform length: approx. 7,300 mm Phenolic plywood floor Front Wall Aluminium front wall, approx. 1,200 mm high Heavy-duty steel corner posts (volume design) Electrical System 24 V electrical system Multi-chamber lights Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Registration & Certification Country of registration: Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour markings with white reflective strips on the sides and red reflective strips at the rear

Condition: used, Huda Technology HUD-G809 Drop Shock Test System Njdpfx Aezikb Ism Uswk The system is also suitable for testing batteries. Max load: 100 kg Table size: 500 mm x 600 mm Peak impact acceleration range (half-sine wave): 150 - 6000 m/s² Pulse duration (half-sine wave): 0.5 - 30 ms If the pulse duration is less than or equal to 3 ms, the tolerance for peak acceleration is ±20%; the tolerance for pulse duration is ±15%. If the pulse duration is greater than 3 ms, the tolerance for the waveform should comply with the range specified in the standard. Velocity tolerance: ±15% Hydraulic brake prevents secondary impact. Overall table dimensions: 1000 x 750 x 2450 mm Weight: 3600 kg Power consumption: 5.5 KVA 380V ±10% AC 50 Hz Condition: used (We reserve the right to make changes and correct typing errors in technical data and specifications!) If you have any other questions, we would be happy to answer them by phone.

Condition: used, Year of construction: 2010, 2010 | Wacker Neuson DPU130 | Used Hand compactor 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 6800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Nwsdpfoy Rukljx Am Uek 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Lombardini engine. Reversible plate with remote control. Impact force 5 tons. Low hours. The eccentrics were replaced at 285 hours. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40831 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, neu ca. 4 Wochen ab Auftragse Nwjdpfx Ajyrhpiem Uok Polen 1760 € 1 1 18 mm 60 ° 2-5 mm 1800-5850 U/min 40 mm 2.2 kW 585 mm 156 mm 238 mm 10 kg portable bevelling machine for milling edges of plates and pipes made of steel, aluminum alloys, brass or plastic bevel angle and bevel radius depends on accessories continuous bevel width adjustment overload protection electronic speed control BASIC SET: BM-18 bevelling machine without accessories plastic case 32mm open end spanner allen wrench hex s = 6 Grease for fixing screws(5 g, 0.17 oz) user manual

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 1445 € 19 mm Weldon 1 kW 307 mm 221 mm 317 mm 135 kg 36 mm 51 mm 70 mm 350 U/min 6 mm New PRO-36 AUTO is equipped with unique LED monitoring system that indicates current condition of the drill and gives additional safety and diagnostic information. Auto Feed Smart Drive System optimizes parameters for each cutting/milling operation, when drill works in automatic mode. The drill controller keeps choosing the most effective working conditions based on the correlation of motor load, feed speed and the range of allowable cutting parameters for a given tool type and hole diameter. It results in extending tool life of both HSS and TCT cutters and enhanced machine performance. Countersinking and working on thin workpieces, when the LED shows that the clamping force is low (flashing green) are possible in manual mode only. A safety strap protects the machine from falling in case of a clamping loss. Features and benefits: • LED Monitoring System indicates current condition of the drill and gives safety and diagnostic information Nsdpjyrhppsfx Am Uswk • LED Monitoring System flashes green when inadequate adhesion is detected due to e.g. gap or thin workpiece • Auto Feed Smart Drive optimizes the milling parameters for each tool individually depending on its type (HSS or TCT) and hole diameter from 12 mm up to 36 mm, that significantly extends tool life • tilt sensor stops the motor if machine breaks away • dual bars guide system ensures extraordinary stiffness and adjustment free operation • Magnetic Field Shape Control (MFSC) provides maximum holding power on thin materials • Auto-feed control stops the machine when cutter goes through • protection against auto restart after power cut off • compact, rigid design with ultra-light weight of 13.5 kg Standard shipping set: • Drilling machine • Metal box • Safety strap • Cooling system bottle • Chip guard • 4 mm hex wrench • Operator’s Manual

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Polen 2595 € 12 mm 19 mm Weldon 0.4 kW 361 mm 238 mm Nedpfxsyrhtns Am Uswk 352 mm 145 kg 12 mm 36 mm 50 mm 70 mm 260 U/min 6 mm This special design battery-operated drilling machine equipped with permanent magnetic base is dedicated to operate in remote areas, where no power supply is available. The base includes very strong neodymium magnets and does not require any electricity to operate. PRO-36 PM Battery is equipped with LED monitoring system that generates signals in green and red colors to indicate the current status of the drill and provide safety information. The drill can be used with convex (min diameter - 80 mm) and concave (min diameter 1000 mm) materials. Up to 47 holes fi 20 mm in 10 mm thick plate can be made when PRO-36 PM Battery is equipped with CAS LiHD 10.0 Ah battery pack. Features and benefits: • LED interface flashes green when inadequate adhesion is detected due to e.g. gap or thin work piece • dual bars guide system ensures extraordinary stiffness and adjustment free operation • overload protection • tilt sensor stops the motor if machine breaks away • control panel is equipped with so called „vandal resistant” illuminated start/stop motor buttons. Standard shipping set: • Cordless Drilling Machine with coolant container • Plastic Box • Battery 4.0 Ah • Handle (3 pcs) • Safety strap • Allen wrench hex s=4 with handle • Operator’s Manual OPTIONS (PRICES ON REQUEST): Battery charger Pressure cooling system Vacuumpad Vacuumpump Compressed air ejector

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,800 kg, maximum load weight: 27,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: original, Year of construction: 2026, Customized transport solution Configure your Fliegl trailer according to your requirements. The vehicle shown is an example only. Production and equipment are customized according to customer specifications. # Chassis Heavy-duty HANGLER welded construction made of high-quality steel with tapered welded main beams and reinforced neck section with double centre web. Punched Z-profile cross members with welded side frame. Replaceable 2" kingpin with chamfered skid plate. 18 pairs of recessed lashing rings (2.5 t each) and 8 pairs of recessed folding lashing rings (5 t each). 24 t two-speed landing gear, one-side operation. 2 wheel chocks with holders. Aluminium side underrun protection. Plastic mudguards in front of and behind each axle with anti-spray mud flaps. Rear underrun protection and full-width rear mud flap. Approx. 8,000 mm covered coil well divided by approx. 40 mm inclined loading beams. Stake pockets and supports for FR 80/80/4 stakes, fully hot-dip galvanized. 80/80 plug-in stakes with reinforced lower section. Hydraulic inclined loading system with 4 cross beams. Hydraulic supply via tractor through a 2-line hydraulic system (pressure/return) with double Faster couplings. Inclined loading beams with integrated height-adjustable telescopic extensions. Multi-stage hydraulic cylinders with universal joints. Adjustable supports with locking pins. Cylinder openings protected by strip brushes against dirt and weather. 5-function control valve for inclined loading system and folding mechanism. Sliding roof system with tarpaulin apron cover. 1 tank-end support set with height-adjustable support pins for different tank diameters, including storage bracket. Front impact stop for inclined loading platform. # Axles + Suspension Nwodoi Riw Hopfx Am Usk Disc brake axles Offset axle spacing 1,310 / 1,450 mm Air suspension # Brake system Dual-line compressed air braking system Aluminium air tanks Spring parking brake Axle load detection via EBS CAN bus Tyre Pressure Monitoring System (TPMS) according to ECE R141 with display in the towing vehicle via EBS # Wheels and tyres 435/50 R19.5 tyres # Electrical system 24 V electrical system Multi-chamber lighting Yellow LED side marker lights Flashing LED side marker lights synchronized with turn indicators 2 × 7-pin and 1 × 15-pin front sockets Additional 7-pin rear socket (ISO 1724) integrated into the underrun protection Double LED illuminated warning panels, extendable to 3,000 mm, removable with plug connection LED rotating beacon with holder, switched via parking lights # Floor Approx. 30 mm phenolic plywood floor, flush-mounted with the side frame # Front wall Fixed aluminium hollow-profile front wall, approx. 2,400 mm high, with timber slats above. Interior reinforced with 3 mm aluminium wear plate up to approx. 630 mm from floor level. # Posts 2 fixed front volume corner posts, approx. 2,400 mm high 3 pairs of Kinnegrip centre posts, approx. 600 mm high, with Kinnetop extension to approx. 2,000 mm 1 pair of removable and foldable rear corner posts made of aluminium hollow profiles, approx. 600 mm high, reinforced internally up to the first slat row Integrated curtain bow recess with two rows of curtain bows. # Roof EDSCHA Profi 95 sliding roof system with straight roof frame and steel scissor mechanism for full curtainsider tarpaulin. Mechanically adjustable roof.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,930 mm, loading space width: 2,450 mm, loading space height: 1,300 mm, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example only. Production and equipment are customized according to customer specifications. # Chassis – Turntable Container Trailer Heavy-duty fine-grain steel welded construction Sliding container system: Container is loaded from the rear onto the sliding frame and pushed forward. Adjustable front container stop for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers. Container locking system: * 2 pairs of recessed locking hooks * Pneumatic operation Heavy-duty turntable with ball-bearing ring. 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half-shell mudguards Vertical rear impact protection (left and right) with Delta rubber buffers 1 spare wheel holder with mounting kit Lockable plastic toolbox with drawer and shelf (650 × 520 × 670 mm) Nwsdpfx Amjzna Tdj Uek # Drawbar Drawbar with certified 40 mm towing eye # Axles + Suspension SAF disc brake axles Laser-measured axle/chassis alignment for reduced tyre wear and fuel consumption Air suspension with raise/lower valve # Wheels and Tyres 385/55 R22.5 tyres on factory silver steel rims # Brake System Dual-line compressed air braking system Spring parking brake Drive-away protection: parking brake is automatically activated when the container locking system is open Vehicle Stability System (VSS) 2 non-interchangeable air couplings with connecting lines to the towing vehicle Electronic Braking System (EBS) with front connector and connecting cable Note: Trailer may only be operated with towing vehicles that ensure full ABS functionality. # Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights 2 white front position lights 2 white/red rear outline marker lights 2 LED rear work lights, activated via reverse gear 2 × 7-pin front connectors with connecting cable # Registration Prepared for registration in Germany DEKRA approval and certificate according to §13 EC-FGV 24/7 service hotline Prepared for single-line number plate holder ECE R48 reflective contour markings (white sides, red rear) # Finish Frame hot-dip galvanized with passivation or painted in customer's preferred colour Drawbar KTL-coated in black

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, operating hours: 158 h, Equipment: documentation/manual, Filter Purifier ARX-2000 - USED - 157 HOURS AND 58 MINUTES Arx-2000 air treatment system is an air purifier filter for Co2 laser machine; it is sized for MT-1613 , MT-2513 and CO2 Conveyor Laser Machine Nwodpfet Ua Arox Am Uek Equipped with practical wheels. Our Arx systems greatly reduce pollutants and odors, providing excellent comfort to the working microclimate by having a low noise impact, thus having an efficient and effective air treatment system. The Arx-2000 laser machine air purifier filter is equipped with Glass Fiber and Polyester filtration system with the possibility of adding 12 Cylindrical Activated Carbon, Rigid Pocket Absolute Filters. With the touch screen controller you can easily turn the purifier on or off, check filter status and hours of operation. Flow rate 2000 mc/h Motor Power 2200 W Power Supply Voltage 220 V Frequency 50 Hz Inlet connection 2 of 150 mm Outlet connection 200 mm Filters Fiber, Polyester, (Carbons and Absolute optional)

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, Equipment: * Sled trailer 20 S * Novagrau * 2-axle trailer chassis for containers * Sled configuration (20S) * External reference length approx. 7,055 mm * Overall width approx. 2,500 mm * Ride height loaded approx. 1,150 mm * Conveyor track length approx. 6,890 mm * Wheelbase 5,240 mm * Unladen weight (complete) approx. 3,460 kg * Technically possible gross weight approx. 20,000 kg * Permissible total weight approx. 18,000 kg * Payload approx. 14,540 kg * Suitable for containers from 5,000 to 7,000 mm length according to DIN 30722 * Chassis construction from welded I-beams, QSTE steel * 4 container locks & sliding carriage locking, pneumatically operated * Side guard in accordance with RL 89/297/EEC (closed design) * Bogie 980 FM incl. ball-bearing slewing ring 90/1100/22 (low-maintenance) * Drawbar 2600/980/100/30, inclined tow eye with height adjustment (tension spring w/ turnbuckle) * Drawbar with DIN tow eye: inside D=40mm, outside D=110mm, thickness 30mm * 2 x 10 t axles for 19.5'' disc brakes, axle brand as per manufacturer's choice * Brake disc diameter approx. 370mm * Wheel fixing by hub-centric mounting to DIN 74 361 Part 3 * Compressed air brake system per EU directive with Duomatic coupling head * Conventional air suspension * EBS type 4S/3M, electronic braking system with ROLL Stability * Double diaphragm spring brake cylinders on rear axle * Release valve for separate spring brake release * Lighting system 24 Volt full LED according to RL 76/756/EEC with multi-chamber rear light and integrated license plate light * 1 x 15-pin connector * 6 pcs LED side marker reflectors with indicator function * 2 pcs LED white front marker lights * 2 pcs separate rear lane control LED lights * 1 additional LED reversing light * Regional transport tyres, tyre brand at manufacturer’s choice * 8 pcs 265/70R19.5 (7.5x19.5) * Steel wheels, ET 138 * Unpainted wheel nuts * Including tyre pressure monitoring * Aluminium underride protection * Two vertical delta impact protection profiles at rear for added protection during loading/unloading * 4 pcs plastic fenders, half-shell design front & rear, single wheel fender * 4 pcs neutral antispray mudflaps * 1 lockable plastic toolbox * 1 wheel chock with bracket * 1 A-board for transport of waste materials * 1 net box (hanging) Nwodpsyv Ttvjfx Am Uok * Chassis colour: MB7350 Novagrau * Sliding carriage: MB 7350 Novagrau * Hub colour: black KTL * Wheel rim colour: RAL 9006 silver * Rear contour markings: red * Side contour markings: white * Closed SSE: RAL 7001 silver grey * Rear end/light plates: RAL 7001 silver grey * Underride bumper: aluminium anodised (silver) * Locking hooks, container guides: yellow All information subject to change and without guarantee. Errors excepted. Subject to prior sale.

Condition: used, This package includes: 1 x Crossbeam, 3,600 mm (yellow) 2 x Locking pins Approximately 170 uprights and 800 crossbeams are available for this system. Please contact us for more information. Nwodpfjyu Rbaox Am Uok Manufacturer: Jungheinrich Condition: used, good condition Shelf depth: 1,100 mm Crossbeam length: 3,600 mm Load capacity per shelf: 3,200 kg Accessories such as: Floor anchoring Connectors Load warning signs Impact protection Guard rails Grid decking Rear panel grid Deep shelf supports Barrier railings and much more... Just ask us! Sales & Delivery Conditions (B2B) - Prices & Logistics: All prices are quoted net from our location. Express delivery via our own fleet is possible after individual agreement. - Offer Status: All offers are subject to change and without obligation. We reserve the right to sell items prior to confirmation. - Retention of Title: The goods remain our unrestricted property until full payment is received (no right of disposal or processing). - Warranty: Exclusive distribution to commercial businesses (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: new, power: 227 kW (308.63 HP), fuel type: diesel, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space length: 7,280 mm, loading space width: 2,450 mm, loading space height: 2,560 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), Equipment: - Extended Day Cab - Reinforced mechanical cab suspension - Halogen headlights with double reflector and impact-resistant Lexan lens - Headlamp beam for right-hand traffic - Daytime running lights - Adjustable roof spoiler - Long side fenders - Cab color: E1980WHTE - Headlamp surround and bumper color: Stone Grey - Underbody and side step, cab and mudguards in Stone Grey - Roof spoiler color: Crystal White - Side fender color: Crystal White Nedpfx Aoyqdkmem Ujwk - Chassis color: grey - Left-hand drive - Air-suspended luxury driver’s seat with adjustable damping and pneumatic lumbar support - Driver’s seat with armrest - Fixed passenger seat - Engine tunnel storage compartment - Manually controlled air conditioning with recirculation function - Roof hatch with manual operation - ECAS remote control - Universal FMS connector (Fleet Management System) with wiring for reading truck manufacturer’s FMS standard data - 10-year PACCAR Connect subscription - Pre-installed wiring for satellite communication system for German toll (toll collection system) - Digital (intelligent) VDO tachograph - Speed limiter configuration for cruise control/throttle: 90 km/h - DAF Infotainment System - Combined antenna for AM/FM, GSM, and GPS. GSM frequency ranges: 900 MHz, 1800 MHz, and GPRS - Adaptive Cruise Control (ACC) with Forward Collision Warning (FCW) and AEBS-3 (AEBS: Advanced Emergency Braking System) - Driver Performance Assistant (DPA) - Speed limit recognition - DAF Drowsiness Detection - Lane departure warning system - Electronic Vehicle Stability Control (VSC) - Acoustic reversing warning system - Basic immobilizer - Hill start assistant - Safety system to alert the driver to moving objects on the passenger side - Front axle type 152N, with 100 mm offset. Parabolic suspension - Mechanical differential lock - Front axle(s): Tire size 295/80R22.5, rim size 22.5 x 8.25 - Driven rear axle(s): Tire size 295/80R22.5, rim size 22.5 x 8.25 - Supplier: Goodyear - Tire pressure monitoring - Steel disc wheels, silver grey - Wheel trim rings without center section, silver grey (RAL 9006) - Front axle: Tire size 295/80R22.5, Goodyear KMAXS2 - Driven rear axle: Tire size 295/80R22.5, Goodyear KMAXD2 - Spare wheel not applicable - Engine PX-7, 6-cylinder diesel engine, 6.7 liters. Output 227 kW (308 HP) at 2300 rpm. Max. torque 1190 Nm at 1200–1500 rpm - Emissions standard Euro 6 - Idle shut-off after 5 minutes - PowerLine automatic transmission, 8 speeds - PowerLine 8AP1200 automated transmission, ratio 4.89–0.64, 8 speeds - Software for automated gearboxes, optimized for normal transport applications. Gearbox control version: Full. - Rear axle ratio 5.14 - ASR system - Parking brake operation with test position - Wheelbase 5.85 m / rear overhang 2.68 m - Longitudinal member height 270 mm, thickness 8.0 mm. No internal reinforcement. - Aluminum fuel tank, 340 liters - AdBlue® tank 30 l, positioned on the right side of the chassis - Wheel chock - Suitable for towing drawbar, type plate up to max. permissible GCW - Drawbar crossmember, D value 85 kN, Dc value 70 kN, V value 25 kN. Trailer coupling D value 85 kN. Crossmember and coupling - Pneumatic coupling for trailer with rotary couplings - Electrical connection for trailer (24 V) with two 7-pin sockets. An additional 7-pin socket for connecting the trailer/semi-trailer EBS system - LED side marking lights (text cut off)

Condition: good (used), Fritz Werner Universal Tool Milling Machine, Type 5130 An extremely robust and precise universal tool milling machine from the long-established, high-quality German manufacturer Fritz Werner (Model 5130). This conventional knee-type milling machine stands out due to its solid grey cast-iron construction and exceptional reliability. It is ideally suited for workshops, toolmaking shops, repair facilities, demanding DIY enthusiasts, or training centers. The machine features a swiveling vertical milling head with manual quill feed (perfect for additional drilling operations) as well as a mechanical feed gearbox. A standout feature is the retrofitted premium safety spindle guard from Tecno Più. Technical specifications at a glance: Manufacturer: Fritz Werner Werkzeugmaschinen GmbH (Berlin) Type / Model: 5130 (Series 5.130) Design: Conventional universal tool milling machine Tool holder: SK 40 (steep taper with drawbar) Table dimensions: Approx. 600 x 215 mm with 3 parallel T-slots Axis movement: Manual via precision handwheels (2 mm travel per revolution) + automatic feed (Type 101) Vertical head: Swivels ± 90° with manual quill lever and adjustable depth stop Drive: Three-phase motor (400 V, CEE plug included) Included accessories: Solid machine vise (mounted on table), drawbar, chip guard hood Nwsdpfx Aszcw Ddjm Usk Safety upgrade (included): Spindle guard: Tecno Più S.r.l. (Model PTR 11/180) Year of manufacture of guard: 2017 (CE marked) Function: Impact-resistant polycarbonate shield (180 mm) with IP67 safety microswitch for automatic spindle cut-off when the guard is open. You can find other milling machines—new and used—in our shop! International shipping costs available upon request!

Condition: used, empty load weight: 9,649 kg, maximum load weight: 32,351 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 04/2027, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,700 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: white, Year of construction: 2023, Equipment: ABS, Tare weight: 9649kg, GVW: 42000kg, Pharma certificate, Loading area (L W H): 13,403 mm x 2,490 mm x 2,700 mmTyre size: 385/65 R22.5, Loading area volume: 90 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Lift axle front, Self-levelling suspension, Electronic Brake System EBS, Toolbox, Ferry lashings, ISO partition wall without ventilators, Temperature recorder, Double deck with beams, 1x15 and 2x7 pin plug, Antispray, Telematics system, Tyre pressure control, Impact buffer, Multifunctional floor: 5500kg, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Nedpfozc Ag Rjx Am Uowk

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, total length: 710 mm, total width: 690 mm, total height: 1,560 mm, electrical fuse: 16 A, input frequency: 50 Hz, empty load weight: 300 kg, Impactor/Mixing machine Fomko F 32 LH Impactor/Mixing machine Fomko Model: F 32 LH 1 mixing paddle, 1 impact paddle 1 32-liter stainless steel container Powerful and robust technology Connection: 400V, 16A-CEE plug Used machine Visit our large exhibition of bakery machines! Njdpfx Amjygdcho Uswk

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902028859, empty load weight: 5,660 kg, maximum load weight: 29,340 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,700 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, Chassis, Semi-trailer, Transport Company Steel welded construction in reinforced design, only 2 longitudinal members as double T-beams with steel/diamond-plate between the longitudinal members, kingpin plate with replaceable 2" kingpin. Mudguard for tail lights. 8 pairs of lashing eyes screwed or welded to the frame, at the manufacturer's discretion. 24 tons, 2-speed support legs, single-sided operation, with straight lower part, without thrust compensation. Chocks with holder. Aluminum side impact protection. Galvanized steel underrun protection. Half-shell fenders with anti-spray flaps according to EC. 1 spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 storage box recessed between the longitudinal members. 8 pieces of wood rack supports, at the manufacturer's discretion, screwed to the frame, each with 2 extendable wood racks from 1800 to 2800 mm, 7 tons per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift and lower valve, safety cable on the axles. 1st axle automatic lift axle, including forced lowering and starting aid, operated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Axle spacing staggered 1410/1310 mm (combined transport) up to 44 tons total weight. Wheels and Tires 385 / 65 R 22.5" at the manufacturer's discretion. Steel rims, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. Axle load recognition via EBS-CAN bus signal, for display on the dashboard in the cab; the truck must be correspondingly prepared, no truck installation (no calibrated scale). 2 non-interchangeable coupling heads at the front, without connecting cable. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! "Safe Parking" Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Njdpfoza Anvsx Am Uowk Front wall / corner posts Steel / grid front wall, approx. 2300 mm high, screwed to the frame. Approval / Signs Country of approval: Germany. Type approval according to EC 2007/46. Prepared for single-row license plate holder. Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Warning sign according to ECE - 70. Paint Frame: DB 7350 Novagrau (dark grey) Support legs: Black coated. Front wall: Hot-dip galvanized.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014200, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,500 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: grey-black, Chassis, Semi-trailer, Logistics Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support Free support leg angle or free swivel radius to the rear, approx. 1920 mm 2 support wedges with holder Nwjdpfx Amjza A Txo Uok Aluminum side impact protection Steel underrun protection Partial wheel covers in front of and behind each axle Splash flaps in front of the 1st axle and behind each axle with anti-splash protection, according to EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Axles + Suspension SAF drum brake axles "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist function, activated by "3x braking" (starting assist function is operational up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking System 2-line compressed air brake system Color-coded line routing for easy maintenance Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 235/75 R17.5, brand according to the manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / corner posts 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a full-volume design Country of Approval / Signage Germany With DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminum

Condition: used, empty load weight: 6,570 kg, axle configuration: 3 axles, first registration: 06/2019, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2019, mileage: 3,47,999 km, ref: F0900316 Equipment: * Air connection: Red/Yellow head, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Document box, * Ferry lashing, * Side impact protection, * Lifting odometer, Nwsdpfx Aezbc N Nom Uok * Wheel chocks: 2, * Tool box: 2, * Access ladder, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding tarp, * Pull rod for sliding tarp, * Side sliding curtain, * Multilock, * Floor: Plywood floor, * Rail pocket left, * Rail pocket center, * Rail pocket right, * Insertion strip (wood): 24, * Rail depot: Right, * Customer lettering VIN: WKESD00000900316 Tire size: 385-65 R22.5 Internal length: 13.62 m Width: 2.55 m Internal width: 2.48 m Height: 4.01 m Internal height: 2.79 m

Year of construction: 1970, condition: used, Technical details: x-travel: - mm y-travel: - mm z-travel: - mm workpiece weight: 800 kg machine weight approx.: 0,75 kg dimension machine xH: 1,2 x ,08 x 2,0 m Nwsdpfxoxu Dwys Am Uok The impact toughness is a measure of how resistant a material is to sudden, impact loads, especially when it has a notch (kerf) beforehand. It is mainly used for metals to assess fracture toughness under dynamic loading. *

Condition: new, functionality: fully functional, power: 420 kW (571.04 HP), color: other, Year of construction: 2026, Equipment: cabin, The CONSTMACH JS-2 mobile crushing plant is designed to efficiently crush low and medium hardness materials such as limestone, river stone, dolomite, and basalt. With its compact design, powerful crusher combination, and mobile ease of use, the JS-2 delivers maximum performance across various production areas. The plant performs the primary crushing process with the CJC-90 jaw crusher, while the CSI-1212 secondary impact crusher in the second stage ensures a perfect cubic-shaped final product. This feature delivers ideal results, particularly for concrete production. Nwsdpfxsxpv R Ie Am Uok The JS-2 is equipped with a vibrating feed bunker, bypass belt, hydraulically supported mobile chassis, PLC-controlled automation system, and optional diesel generator set. The system is easy to install, can be put into production quickly, and can be operated without the need for a crane or loader when required, thanks to its hydraulic opening mechanisms. Furthermore, all components are from reliable brands such as SIEMENS and SCHNEIDER, ensuring long-term use. JS-2 Mobile Crushing and Screening Plant Technical Specifications Production Capacity: 150–200 tph Maximum Feed Size: 900 x 650 mm Feed Height: 5.7 meters Main Configuration: Jaw Crusher + Secondary Impact Crusher + 3-Tier Screen Total Motor Power: 355 kW Electric Generator Requirement: 700 kVA Plant Weight: 80 tons Plant Dimensions: 1. Chassis: 11 x 3.4 x 4.4 m / 2. Chassis: 18 x 3.65 x 4.5 m Chassis Type: Hydraulic folding legs, wheeled dual chassis Why Choose the JS-2 Mobile Crushing Plant? CONSTMACH JS-2 stands out from its competitors with its durability, high efficiency, and portability. Thanks to its advanced automation system, it can be easily controlled by a single operator. High-quality European components offer low maintenance costs and a long service life. Delivering reliable performance in all site conditions, JS-2 will more than pay for your investment for many years to come. For those seeking quality, reliability, and engineering excellence in a mobile crushing plant, CONSTMACH is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Shaft Impact Crushers (VSI) stand out among rock crushing machines due to their high crushing efficiency and excellent particle shape production. Developed by CONSTMACH, these sand-making machines are used in the tertiary crushing stage to give cubic form to materials obtained from secondary crushers and to produce a high proportion of fine material. The system offers superior performance in processing all types of minerals and ores, as well as hard rocks such as basalt and granite. High-quality sand is produced from materials with a maximum feed size of 45 mm. Vertical shaft impact crushers allow you to easily obtain the desired product size for different material types thanks to their variable speed rotor system. It offers production capacity flexibility with a high reduction ratio, large feed hopper, and four different crushing chambers. In addition, high-chromium wheel shoes, anvils, and heavy-duty bearings ensure long life and low maintenance costs. The independent lubrication system and optional anvil replacement mechanism maximize uptime. Vertical Shaft Impact Crusher Technical Specifications Nwodpfxjxp Saxo Am Uek Model: VSI-700-CR Maximum Feed Size: 35 mm Weight: 6,500 kg Motor Power: 110 kW Rotor Diameter: Ø700 mm Rotor Speed: 60–70 m/s Production Capacity: 60–100 t/h Model: VSI-800-CR Maximum Feed Size: 40 mm Weight: 12,000 kg Motor Power: 2 x 160 kW Rotor Diameter: Ø800 mm Rotor Speed: 45–60 m/s Production Capacity: 150–200 t/h Model: VSI-900-CR Maximum Feed Size: 45 mm Weight: 14,500 kg Motor Power: 2 x 185 kW Rotor Diameter: Ø900 mm Rotor Speed: 50–60 m/s Production Capacity: 200–250 t/h Model: VSI-1000-OR Maximum Feed Size: 90 mm Weight: 15,000 kg Motor Power: 2 x 200 kW Rotor Diameter: Ø975 mm Rotor Speed: 50–60 m/s Production Capacity: 250–300 t/h Why Choose CONSTMACH Vertical Shaft Impact Crushers? CONSTMACH is a globally preferred brand in the production of stone crushing machines and sand making machines with its engineering quality. Our vertical shaft impact crushers offer high performance, low operating costs, and long-lasting use. Our models, which can be customized to the production needs of each facility, provide the advantages of easy maintenance and high efficiency. CONSTMACH is always the right choice for businesses seeking quality, reliability, and sustainable production. What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,800 kg, maximum load weight: 34,200 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 13,500 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Nwedpfxoi Riwme Am Usk Chassis, Saddle, Container Fine-grain steel welded construction, saddle plate with 2 replaceable kingpins Container receptacles: 1 x 40 ft with gooseneck tunnel, front extension extended: 1 x 45 ft with long gooseneck tunnel and rear overload The transport of filled tank containers is not permitted. Without rear height adjustment and without folding center supports, transport of containers without a tunnel is not possible. 2 container guides, incl. connection plate for electrical, air and brake connections (connections positioned upwards) Front extension mounted on rollers, manually extendable (for 45 ft containers with long tunnel) 24 tons, 2-speed support legs, single-side operation, with straight lower part, without extension compensation Wedge blocks with holder Aluminum side impact protection Galvanized steel underrun protection Extendable underrun protection for 45 ft containers Half-shell fenders with anti-splash flaps according to EC Rear impact protection Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Offset axle spacing mm (combined transport) up to 44 tons gross vehicle weight Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Test connection for brake cylinder pressure placed on the outside of the EBS module Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be appropriately prepared, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, rear and brake lights in LED, yellow LED lighting on the side (Note! with certain towing vehicles, false diagnoses may occur, even if the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable Operating instructions Note: Transport of filled tank containers is not permitted! When transporting 45 ft containers with a short tunnel, with or without a front extension, the permissible system length from kingpin to the rear edge of the vehicle and the total train length of 16500 mm will be exceeded! The underrun protection must be manually extended! An exemption permit according to § 70 StVZo is required! Country of registration / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau, 10 years warranty against rust-through Support legs black coated without pallet box paint Note: Archive images!

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Fine-grained steel welded construction in lightweight design, up to the support legs, drawbar with interchangeable 2 kingpin Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps, foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with bracket 1 plastic toolbox, with drawer and insert, w=650/h=520/d=670 mm, can be locked with a padlock 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Nwsdpfsi Riwxsx Am Usk Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering & starting assist, actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle Stability System Wheels & Tires 385/55R22.5 according to manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system. Switching between forward/reverse operation is done electrically via remote control with cable. -Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump performance: Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design SBS Tipper Body Aluminum box tipper body, front and side walls made of aluminum hollow profiles, welded around the top with a wide special reinforcement profile made of aluminum, and welded with a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 externally mounted swivel locking rods, locked at the top & bottom. Rear wall with mechanical safety locking, operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platfor

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r22.5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction in lightweight design, extending to the support legs; kingpin plate with 2 replaceable kingpins Lateral floor preparation for lashing eyes 24-ton, two-speed support legs, single-sided operation, with straight lower part, without shock absorption Extendable ladder at the rear Door latch on the side 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps; foldable mudguard for lighting unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with holder 1 plastic toolbox, with drawer and insert, b=650 / h=520 / d=670 mm, lockable with a padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking system 2-line compressed air braking system; color-coded lines for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable With raise and lower valve Vehicle - Driving stability system Wheels and tires 385/55 R22.5, according to manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Sliding floor hydraulics Hydraulic cylinder with sliding mechanism installed in the floor; 2-circuit hydraulic system Nedpfx Aoi Riywsm Uowk Switching between forward/backward movement electrically via remote control with cable - Sliding floor power supply via parking lights Actuation hydraulically via truck PTO Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump output: Flow rate: 110 l/min Pressure: 250 bar Minimum oil tank filling: 100 l Sliding floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design Tipping body Aluminum tipping body made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded together at the top all around with a wide special reinforcement profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom with rail cleaner Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 pieces of externally mounted swivel bolts, locked at the top and bottom. Rear wall with mechanical safety locking, operation at the rear on the driver's side. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platform with access ladder on both sides in driving direction left/right and railing, for opening

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 28,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,045 mm, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Fine-grain steel welded construction, kingpin plate with interchangeable 2-inch kingpin, slightly sloping outer frame, new design with Load-Lock profile for securing lashing straps, 24-ton capacity, two-stage landing gear, single-side operation, with straight lower section, without horizontal load compensation. Note: Free support leg swivel angle or free swivel radius to the rear approx. 1930 mm, extension ladder at the rear, door lock on the side, 2 wheel chocks with holder, Aluminum side impact protection, galvanized steel under-run protection, quarter panel fenders in front of and behind the axle assembly, with anti-splash flaps according to EG standard, rear impact protection. SAF disc brake axles with 430 mm disc diameter, axle/suspension laser-aligned to reduce tire wear and fuel consumption, air suspension. Two-line compressed air brake system, color-coded lines for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic brake system with EBS socket at the front, without connecting cable. Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve, vehicle – driving stability system. 385/65R22.5, manufacturer's choice, steel rims, factory silver. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 2 x 7-pole tamper-proof sockets at the front, without connecting cable. Floor: Sieve-printed panels approx. 30 mm thick, mounted on longitudinal supports for high point load capacity for forklift axle loads up to a maximum of 7100 kg. Front wall/corner posts at the front: 2580 mm high, corner posts made of steel in a full-volume design, release device for side tarpaulin on the front wall, crash barrier, at the bottom inside at a height of approx. 140 mm with steel impact protection. Side supports: 3 pairs of sliding supports that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket, 3 pairs of support positions. Insertion slats: 5 rows of wooden insertion slats. Rear wall/corner posts at the rear: Corner posts made of steel at the rear up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel latch locks each. Tarpaulin: Tarpaulin with welded horizontal and vertical straps, tensioning closures made of stainless steel. Nwedpfx Amsi Riy To Usk Roof: Sliding roof, rear lift that can be folded up, with the roof that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams, approx. 2490 mm, tarpaulin color: white, 400 Roof non-elastic, minimal deflection of the roof beam during loading and unloading, optimal rain strip at the rear, at the top of the rear crossbar, above the doors. Germany, test approval according to EG 2007/46, 24/7 service hotline, Fliegl manufacturer's certificate for structural integrity according to EN 12642 XL, prepared for single-row license plate holder, warning sign according to ECE - 70, reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the co