Used Bolt Cutters for sale (4,474)

Condition: refurbished (used), Hand corn cutters 10 pcs for sale - Type: A&K - Second-hand, refurbished - Includes 1 new cutterhead - Without knives Fpedpfx Aajyxnqbe Nsg FCA Debrecen

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 98 h, nominal power: 49.28 kW (67.00 HP), machine/vehicle number: 1VR91125KN1004048, Equipment: CE marking, Trench cutter with only 98 operating hours! Fsdjy Htgqepfx Aa Nspg TECHNICAL DETAILS Milling depth: 120 cm Milling width: 15 cm MACHINE DETAILS Net power: 50 kW Weight (according to type plate): 4,740 kg Tractor Tractor weight: 2,663 kg Tractor length: 320 cm Tractor width: 197 cm Height: 250 cm Max. transport speed: 10 km/h Milling boom Transport length: 207 cm Offset range: 61 cm Own weight without milling chain and boom: 690 kg Deutz diesel engine TD 2.9L Tier IV Final/Stage V Engine output: 67 hp Torque: 235 Nm System pressure: 350 bar Pump output: 117 L/min Operating hours: 98 h EQUIPMENT Side-shiftable milling boom Large idler wheel Standard SHARK - COMBO milling chain CE certificate

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Fpodpfeww E Nrjx Aa Nog Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming Fpsdpfxjy Nzk No Aa Nsg PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: as good as new (ex-display), Year of construction: 2023, Fiber laser 1500 x 3000 12kW Year of production 2023 DEMO machine The machine has never worked in production Price includes - exchangeable working table 1500 x 3000mm - 12kW MAXPhotonics source - BLT head with autofocus - HYPCUT software - Nesting software - CYPNEST - Warranty 2 years - Chiller (cooling unit) - Voltage stabilizer - Wireless remote control controller - Automatic high-pressure proportional valve (N2 and O2) - Light curtains Fsdpfor A Ellex Aa Nopg - Camera set (3 pcs) with color monitor - CE safety glass - Safety sensors - Safety rear gate - Barell filter set - CE declaration of conformity

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 25400 € 485.14 € 1250x2500 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 470 l 500 kg/m² 3060 mm 1760 mm 1500 mm 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25 mm price € 26.900,- € 28.400,- € 29.900,- € 32.800,- OPTIONS: water tank to quickly fill and drain thetrough € 2.870,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- Fpjdpfxewiryus Aa Nsg suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 23200 € 445.44 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 24.600,- € 26.100,- € 27.600,- € 30.600,- Options: water tank to quickly fill and drain thetrough € 2.360,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting Fpedpfxewiq Scj Aa Neg € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: used, machine/vehicle number: 007393, Max width workable: 2500 mm Fpedpfx Aaswkrqio Neg

Condition: used, machine/vehicle number: 004877, Max width workable: 1300 mm Fsdpfjwcx Ufox Aa Njpg

Condition: good (used), Heidelberg Cylinder SBD 64×89 Automatic Die Cutter The most sought-after machine on the market, in its late 2000s. The machine is in very good condition and ready for operation. Fodpfx Ajy E Ex Asa Nspg Format: 640x890mm The machine is ready for die cutting. Fully automatic, with smooth speed control, central lubrication, and safety guards. The machine features a quick-change carriage system on the infeed and a convenient cabinet on the side of the machine. Includes two frames, spare parts, a cylinder plate, carriages, and a large set of fillers and locks.

Condition: excellent (used), Year of construction: 1982, Make: OERLIKON Type of machine: FM3 Year of manufacture: 1982 Fpjdpfx Aaji If N Ie Njg Control system: HEIDENHAIN x-travel: 1300 mm Speed range: max. 1120 U/min Control: conventional Machine's weight: 6 t

Condition: good (used), overall weight: 1,200 kg, Machine equipment as required available for an additional charge – almost anything is possible. We specialize in retrofitting Jungner machines. Fodetwpyyspfx Aa Nepg

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, with new upgraded electronics + laser safety guard. Equipment: - heated plate - pneumatic clutch and brake - operator control panel - 3 operating modes: single, continuous, time-delayed opening - central lubrication Fedey Rumyjpfx Aa Njpg - additional safety covers - maintenance tools - hardened pressure sheet

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER VA (CAUHE) – 1860x1440 Fodpfx Asy Rummsa Njpg Machine with low usage, in very good condition Equipment: – Pneumatic clutch and brake – Control console – 3 operating modes: single, continuous, time-delay on opening – Centralized lubrication – Additional safety guards – Working tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) III – 1480x1070 Machine lightly used, in very good condition Equipment: – Pneumatic clutch and brake – Control panel – Quick-mount frame (electric) + additional frame – 3 working modes: single, continuous, with time-delay on opening Fpjdpfjy Rumasx Aa Nog – Central lubrication – Additional safety covers – Service tools – Hardened pressure plate

Condition: excellent (used), functionality: fully functional, SIMPLACUTTER (CAUHE) IV – 1680x1160 Machine lightly used, in very good condition, new upgraded electronics + laser protection Equipment: – pneumatic clutch and brake – control panel – new upgraded electronics + laser protection – 3 operating modes: single, continuous, delayed opening – central lubrication Fsdsy Rulvspfx Aa Nopg – additional safety guards – operation tools – hardened pressure plate

Year of construction: 2022, condition: like new (used), functionality: fully functional, WOOKIL MEGACUT MC-2500 Die Cutter MAX. SHEET SIZE: 1800x2600 mm MAX. CUTTING SIZE: 1700x2500 mm MAX. CUTTING PRESSURE: 550 tons Fpjdpfx Aoy Rulcea Neg

Condition: used, Year of construction: 2016, functionality: fully functional, GFPM SFV 2500 – Year 2016 Arrising Machine Maximum Dimensions: 2500 x 3500 mm Minimum Dimensions: 270 x 400 mm Fpodpsy If Ddsfx Aa Neg Thickness: 4-22 mm Speed: 5-25 m/min. Processing Time: 15 sec./sqm Power: 18 kW

Condition: used, Year of construction: 1989, This Wacker joint cutter, model DFS 90, is being offered in our industrial auction / machinery auction: Collective online auction for construction equipment - building materials - vehicles - site equipment - garden machinery. Fedpoy I Na Asfx Aa Nepg

Condition: used, K+G Wetter Bowl Cutter -Type: SM 90 -Power: 33 kW -Bowl capacity: 90 L -2 bowl speeds -Power supply: 380V 50Hz -Weight: 1420 kg -Made of stainless steel -Dimensions: 2000 x 1400 x 1600 mm -Sound-absorbing enclosure (Plexiglas) Fsdpfx Asx A Tx Noa Nspg -Stock quantity: 1 -Condition: Used in very good condition, overhauled, ready to work

Condition: ready for operation (used), functionality: fully functional, The Alpina PB 90 is a professional-grade bowl cutter designed for industrial meat processing. It is engineered to efficiently chop, mix, and emulsify meat and other food products, making it suitable for large-scale food production environments.​ 🔧 Key Features & Specifications Bowl Capacity: 90 litres Knife Motor Power: 22.0 kW Bowl Motor Power: 0.8 kW Knife Speeds: 6 adjustable speeds Bowl Speeds: 2 adjustable speeds Fjdpowf Dhiofx Aa Nopg Mixing Speeds: 2 adjustable speeds Power Supply: 400 V / 3-phase / 50 Hz Dimensions: Approximately 2100 x 1250 x 1400 mm​

Condition: new, Sind cutter 200 liters with vacuum Type: SVC 200 Completely made of special stainless steel 200-liter bowl made of stainless steel Fpjdpfeul Tm Esx Aa Neg Shaft speed 200/1800/3600 rpm Unloading device: right side Main cover made of special steel, stainless steel Noise-canceling cover made of stainless steel Distribution cabinet made of special steel, inside the machine 6 knives in a set Dimensions: 260x220x195cm Electric power: 63 kW Voltage: 400 V, 50 Hz Weight 5.500 kg

Condition: good (used), Oerlikon Type: Optitome² 2040 HPi / CPQ170628608 Dimensions: Length: approx. 5325 mm, Width: approx. 3050 mm, Height: approx. 2000 mm (machine body) Max. cutting area: 1000 × 2000 mm, 1500 × 3000 mm, 2000 × 4000 mm Max. material thickness: 50 mm Longitudinal drive X-axis: dual-sided brushless 300 W motors, maintenance-free precision gearboxes Transverse drive Y-axis: brushless 300 W motor, maintenance-free precision gearbox Mechanical guidance: linear guides on all axes Positioning speed: 15 m/min Fodjy Nay Aepfx Aa Nspg Cutting speed: 10 m/min Positioning accuracy: ±0.1 mm Cutting table: sections of 600 mm each, pneumatic extraction control, diffuse extraction Support grids: 100 – 150 mm Plasma unit: NERTAJET HPI 300 / 300A / NERTAJET 50 Oxy-fuel cutting: up to 50 mm cutting thickness Cutting current: 15 – 300 A Plasma power source output: 82 kVA Duty cycle: 100 % Plasma unit dimensions: approx. 820 × 710 × 930 mm Plasma unit weight: approx. 350 kg Protection class: IP21 Chiller capacity: 2475 W Tank capacity: 30 l Power supply: 230 V Power input: 1.7 kW Chiller weight: 65 kg Dust extractor air flow: 5,000 – 8,000 m³/h Pressure: 3,100 – 2,400 Pa Filter class: H13 Separation efficiency: 99.9987% Total weight: approx. 3600 kg Condition: used (machine as shown in images) Scope of delivery: (See image) (Specifications and technical details subject to change and errors!) For any further questions, please feel free to contact us by phone.

Condition: new, Year of construction: 2026, functionality: fully functional, Versatile hamburger, hot dog bun, roll-bread, panini and etc slicer-cutter. Fodpfx Asinwg Ioa Nspg Available cut options: full cut, partial cut, two sided cut (butterfly). Suitable for products with dimensions: width up to 150mm, height up to 80mm. Adjustable cut height and width, adjustable conveyor and cutting speed. Capacity approx 100pcs/min. With castor wheels, fully stainless steel, CE, made in Europe Condition brand new, with warranty, ready on stock for shippment.

Condition: new, Fully automated block cutting machine for pallet legs. Maximum length of raw material 6m. The machine suits all type of pallet production. OKKR-2006 can operate as a separate standing machine or as part of a production line. How does it work? The machine is fed block material on the chain infeed conveyor. The material is fed automatically and the machine cuts the blocks into the preinstalled length. OKKR-2006 can be programmed to cut several different lengths of blocks from the original piece of raw material. Maximum length of the raw material is 6m. Asssembled block size: Min / max length: 600 mm - 6000 mm Width min / max: 75 mm - 150 mm Fpjdpfowdutmjx Aa Neg Thickness min / max: 75 mm - 100 mm Specifications Operators | 0 Length | 7,5 m Width | 2,5 m Height | 1,8 m Power | 7 kW, 3x400 V+N Pneumatic system | 7 bar compressed dried air: 450 L/min Should be filled and controlled | Lubrication points Machine capacity | 36 blocks/min Standard equipment | 1 electric motor for saw blade 1 electric motor for material infeed 1 electric motor for chain infeed Mychrome has various additional machine modules that can be easily docked onto existing machines to achieve a higher level of automation. The ability to change the design and size of the pallets is still available with these additional machine modules.