Used Interbus S for sale (67,668)

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, controller manufacturer: MITSUBISHI, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 250 mm Travel range, Z-axis: 250 mm Fpodpfxoz Hxb Uj Ap Den Spindle speed range: 60–15,000 rpm Spindle speed control: stepless Tool changer: vertical Magazine capacity: 12 Tool interface: SK 30 Workpiece clamping area: 400 × 250 mm MACHINE DETAILS Control system: MITSUBISHI Jaw width: 100 mm EQUIPMENT Fixed angular table Dual-pallet changer 4 × Allmatic vices Various tool holders SK 30 Electronic handwheel Full-protection enclosure with sliding doors and interior lighting Coolant system with paper band filter Coolant system Two-color signal light Chip conveyor 6 × Machine feet Operating manuals

Condition: not inspected (used), We are selling a used Fronius distributor, Interbus 2MB Rugged Line. This is a MIG-MAG distribution unit that we no longer need because we have modified our equipment. Article number 4,045,885. Sold without warranty or the possibility of return. Fsdpezvc Tiefx Ap Depn

Condition: used, Frequency converter, frequency converter, drive converter, controller, variable speed drive, converter, inverter -Manufacturer: Lenze, frequency converter type 33.8216-E with Interbus S Fpedpfjh Tgduex Ap Den -Max. Power: 5.5kW -Input: 3/PE AC 400V 27A 50/60Hz -Output: 3/AC 0-400V 13A 5.5KW 0-480Hz -Number: 1x converter available -Price per piece -Dimensions: 280/125/H230 mm -Weight: 5.3 kg/pc

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Lenze, frequency converter type 33-8213-E with Interbus S -Max. power: 2.2 kW -Input: 3/PE AC 400 V 11.0 A 50/60 Hz -Output: 3/AC 0-400 V 5.5 A 2.2 kW 0-480 Hz Fedpsh Rpafjfx Ap Djpn -Number: 5x inverters available -Price: per piece -Dimensions: 280/240/H85 mm -Weight: 3.1 kg/pc

Condition: used, machine/vehicle number: 90540056, Year of construction: 2017, operating hours: 788 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,200 kg Lifting height: 2,500 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 150 Ah Battery type: 2 PzB Dimensions & Weight Fpsdpfx Asz Iw A Hjp Dsn Dimensions (L x W x H): 1,800 x 800 x 1,720 mm Own weight: 800 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 788 h EQUIPMENT Formerly a Jungheinrich full-service unit All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 446

Condition: used, Fieldbus, Profibus, SPS control, automation technology, controls and regulators, bus coupler, logic bus terminal, input terminal, Interbus S -Manufacturer: Lenze, Interbus S Module Bus Drive -Type: 33.2111IB -Number: 11x module available -Price per piece Fedpfxshzvwxs Ap Dspn -Dimensions: 75/45/H60 mm -Weight: 0.1 kg/pc.

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: 64 S, Wiesheu Bread Oven Euromat – 2X 5 Trays | Year of Manufacture: 2020 | Excellent Condition | Incl. Mobile Base For sale: Wiesheu Euromat bread oven (10 trays) from 2020. The oven is in excellent condition and has always been well maintained. Delivered including mobile base, ideal for flexible placement in a bakery, shop, or food truck. Specifications • Brand: Wiesheu • Model: Euromat 10 trays • Year of manufacture: 2020 • Condition: Excellent / minimal signs of use Fjdpjxyyazefx Ap Depn • Including mobile base • Professional quality, reliable and energy-efficient • Perfect for bakeries, hospitality, catering or market use Wiesheu is known for its durable and high-performance ovens. The Euromat series is popular due to its fast heat-up times, even baking results, and user-friendly operation. Prices excl. VAT Viewing possible. #Wiesheu #WiesheuEuromat #BreadOven #BakeryOven #CommercialOven #InstoreBaking #WiesheuOven #BakeryEquipment #ProfessionalOven #MIWE #Wachtel #Bongard #Debag #SvebaDahlen #Salva #CateringEquipment #BakeryOven #BakeryMachines

Condition: used, machine/vehicle number: 516301X00339, Year of construction: 2020, operating hours: 5,917 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,150 mm Load capacity: 2,500 kg Fork length: 2,400 mm MACHINE DETAILS Mast type: Duplex free-lift mast Drive type: Electric Battery voltage: 80 V Battery capacity: 620 Ah Battery year of manufacture: 2020 Battery voltage in idle state: 85.4 V Mast type: Duplex free-lift mast Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,200 x 2,750 mm Weight: 4,700 kg Service valid until: 05/2027 Safety inspection valid until: 05/2027 Operating hours: 5,917 h EQUIPMENT Former Still full-service unit 3rd and 4th valve Fork positioner Hydraulically adjustable forks Side shifter Semi-cabin Windshield wiper Comfort seat LED work light, front LED work light, rear Fsdpez Iwqkefx Ap Dopn Orange warning light Safety light, front Safety light, rear If the mast is too high, it can be dismantled for transport upon request and loaded accordingly. All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receiving the payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. A storage fee of €20 per machine and day will be charged if collection is not made on time. Outstanding storage fees must be paid in full before collection. Lot number: 159

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning length: 995 mm, turning diameter: 660 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, rotational speed (max.): 12,000 rpm, bar passage: 65 mm, total height: 2,597 mm, total length: 3,820 mm, total width: 2,348 mm, spindle nose: A2-6, overall weight: 9,570 kg, We are pleased to offer this well-maintained CNC turning and milling machine. It is a Mazak Integrex 200-IV S, manufactured in 2010, fitted with the Mazatrol Matrix control system. Technical specifications: Turning diameter: 660 mm Fpsdpfxez Ndu Ej Ap Den Max. turning length: 995 mm Bar capacity: 65 mm Travel on X-axis: 580 mm Travel on Y-axis: 150 mm Travel on Z-axis: 1,045 mm Travel on W-axis: 1,490 mm B-axis travel: –30 to 210° Main and counter spindles: 5,000 rpm C-axis indexing of both spindles: 0.001° Milling spindle: 12,000 rpm (Capto C6) Tool magazine: 40 tool positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: used, machine/vehicle number: 91671500, Year of construction: 2023, operating hours: 1,435 h, load capacity: 7,000 kg, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Towing capacity: 7,000 kg Fpsdoz Iwt Sjpfx Ap Dsn MACHINE DETAILS Battery voltage: 48 V Battery capacity: 260 Ah Battery type: Lithium-ion battery Tires: White, non-marking tires Lighting: StVZO-compliant lighting with turn signals for road approval Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,000 x 1,400 mm Weight: 1,500 kg Service valid until: 07/2027 UVV inspection valid until: 07/2027 Operating hours: 1,435 h EQUIPMENT Battery charger Formerly a Jungheinrich full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine and day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 357

Condition: excellent (used), Year of construction: 2016, operating hours: 1,158 h, functionality: fully functional, machine/vehicle number: 16-020, overall weight: 450 kg, total length: 1,360 mm, total width: 800 mm, total height: 1,800 mm, fuel type: electric, volume flow: 33 m³/h, pressure (min.): 330 bar, Equipment: compressor, This offer concerns a beautiful Comptrade CTP-S-550E3 diving compressor. The compressor comes with an external filling panel for diving cylinders (5 x 300 bar and 1 x 200 bar). The lever valves were replaced in 2025/2026. I am also including a 50-liter air cylinder. This is a great set, practically ready to use. You just need to connect the electrical wires to the filling panel, and you can start working immediately!!! PERFORMANCE: 550 liters/min Engine speed: 1250 rpm Dimensions: 136/80 cm (width/depth), 180 cm (height) Weight: 450 kg Rated power: 11 kW RUNNING HOURS: Only 1158 hours I have my own transport available. Price from 96-100 EUR, starting from Skierniewice, Poland, to your location, plus 0.33 EUR per kilometer one way. TECHNICAL DATA OF THE COMPRESSOR Medium: breathing air according to DIN 3188 / EN 12021: 2014 Inlet pressure (bar, absolute pressure): 1 + 0.2 Nominal working overpressure (max. bar): 420 Number of compression stages: 4 Number of cylinders: 4 Diameter of 1st stage cylinder (mm): 130 Diameter of 2nd stage cylinder (mm): 60 Diameter of 3rd stage cylinder (mm): 32 Diameter of 4th stage cylinder (mm): 14 Piston stroke (mm): 50 Interstage overpressures: 1st stage (approx. bar): 2.5 – 3.5 2nd stage (approx. bar): 15 – 17 3rd stage (approx. bar): 70 – 75 4th stage (approx. bar): 225 – 400 Air-cooled Lubrication: oil pump Oil quantity (l): 3.8 Type of oil: synthetic oil Permissible ambient temperature: +5°C to +45°C Permissible inclination: 5° Frequency of condensate removal: every 10–15 minutes DRIVE MOTOR: three-phase induction motor (E3) 3×400 V / 50 Hz, 2900 rpm, B3 design, IP 55 Equipment: compressor and motor mounted on a frame equipped with vibration damping elements; the lightweight frame design allows for easy replacement of the drive unit. micron-type inlet filter forced lubrication (oil pump) interstage coolers, final cooler, final mechanical separator for removing oil-water condensate visual oil level indicator on the compressor block final safety valve (set at 225 bar or 330 bar), check valve, thermal motor protection switch, automatic star-delta starting system FILLING PANEL WITH SIX OUTLETS (5 x 300 OR 1 x 200 BAR) AUTOMATIC SHUT-OFF SYSTEM (AUTO-STOP) AUTOMATIC CONDENSATE DRAIN SYSTEM removal of condensate from all interstage separators and the final separator during compressor operation integrated pressure relief starting system (automatic drain upon each device shutdown) condensate tank with a capacity of approximately 5 liters noise dampers, timer to optimize the frequency of condensate draining Fpjdez Rmvcjpfx Ap Djn FILTRATION SYSTEM F 2400 transparent COMP TRADE filter cartridge with extended life and saturation indicator; three-stage filtration (drying, neutralization, microfiltration) air quality in accordance with DIN 3188 / EN 12021: 2014 standards filling: MS-AC-MS (ensures air quality in accordance with DIN 3188 / EN 12021: 2014) filter capacity (air volume): 2400 m³ (at an ambient temperature of 20°C) COMPTROL 1 oil level control system with automatic shut-off function and reset button (activation when the minimum oil level is reached in the compressor block); oil level indicator located at the front of the frame. COMPTROL 2 temperature control system with automatic shut-off function and reset button (activation when the maximum temperature is reached in the last stage of compression)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 571 h, For sale is a tandem press brake with working widths of 3 meters and 4 meters, respectively. The two machines can be operated synchronously and in parallel, providing a total working width of 7 meters. Each machine has only been used for 571 hours and 423 hours, respectively, and has been regularly maintained and is fully functional. Fsdpfx Apjz I Ifxe Dopn The machines are being sold due to the closure of the business. Further information is available by phone or email.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, machine/vehicle number: 1001, This universal concrete paver machine is suitable for producing paving stones from 4 cm in height up to precast concrete elements up to a height of 650 mm. Fpedpfxjz Ix I Re Ap Don The machine is in like-new condition!

Condition: good (used), Year of construction: 1988, functionality: limited functionality, outer diameter: 2,000 mm, total height: 2,500 mm, total length: 5,200 mm, total width: 1,800 mm, inner diameter: 560 mm, overall weight: 5,000 kg, Equipment: documentation/manual, Max. load capacity – 10 t Strip width – max. 1600 mm Spreading – hydraulic, with adjustable pressure Spreading range – 460 – 520 mm; with extension jaws, expandable to 560 – 620 mm Unwinding speed – 30 m/min Strip guide rods – adjustable up to 2000 mm passage width Braking system – pneumatic; brake for mandrel and brake disc (Snout-Stop) with 3 brake pistons Hydraulic pressure roller – can be moved forwards and backwards Unwinding unit – can be moved by 2300 mm (for positioning) Travel path – limit switch on the reel and adjustable cams on the frame Lifting table – 400 mm stroke; with inclined supports for coil and tilting operations Coil material (tensile strength) – max. 470 N/mm² Fpedpfoz Ri Arex Ap Dsn Sheet thickness – 0.5 – 3 mm Dimensions (L x W x H) – 5.2 x 1.8 x 2.5 m Documents/drawings – winding machine, unwinder, pressure roller unit, lifting table More information available upon request.

Condition: good (used), Year of construction: 2007, workpiece height (max.): 100 mm, workpiece width (max.): 1,300 mm, Workpiece height – max. 100 mm Workpiece width – max. 1300 mm Feed rate 0.4 – 2.6 m/min Fpsdpfxsz Rnqzo Ap Den Number of spindles 6 pcs Spindle length 6 x 350 mm Total power consumption 7.5 kW Machine weight approx. 2.3 t Space requirement approx. 2.07 x 2.3 x 2.21 m Additional information Includes a circulating conveyor system for workpiece carriers and an extraction/filtration system.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: VKE / FLPS2 – 4APC/S, type of input current: three-phase, Automatic Vertical Strapping Machine VKE / FLPS2 – 4APC/S Current Status & Availability: The strapping system is fully operational and is currently still in daily use. Fpodpjy Szflofx Ap Don Availability: The entire system is currently fully integrated into the production process and can be inspected under operating conditions after prior arrangement. The planned dismantling/replacement must be carried out by the buyer during calendar week 46-47 / 2026. Technical Data: Pallet Types: Pallet width 500 to 1000 mm Pallet length 600 to 1200 mm Package height (incl. pallet) min. 500 - max. 2000 mm Conveyor height 500 mm Weight (incl. pallet) 150 to 1000 kg Package stacking method: automatic Under-stretching: no Conveyor speed: 12 m / min Pallet transport direction: lengthwise onto lengthwise boards Centering accuracy: centered on the stop light barrier Machine Components: Pneumatics: Festo Gear motors: SEW Control system: PLC S7-200 Control cabinet: Rittal Protection class: IP 55 Main switch: Möller Fuses: Siemens Relays: Omron Push buttons: Siemens Signal lights: Telemecanique Light sensors / light barriers: Datalogic Inductive proximity sensors: Omron / Siemens Cam switches: Siemens Contactors: Telemecanique

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical data will follow... Fjdpfx Ajz Rka Sep Dspn

Condition: used, machine/vehicle number: FN597668, Year of construction: 2019, operating hours: 6,532 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fork length: 1,200 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 3,000 kg Lifting height: 4,000 mm Fork length: 1,200 mm Fork spreader: 550–1,720 mm MACHINE DETAILS Mast: Free-lift mast without a central hydraulic cylinder Machine type: Electric forklift Year of battery manufacture: 2017 Battery voltage: 80 V Battery capacity: 775 Ah Rest voltage: 84.1 V Dimensions & Weight Dimensions: 3,900 × 1,250 × 2,620 mm Own weight: 5,200 kg Service valid until: 07/2027 UVV certification valid until: 07/2027 Operating hours: 6,532 h EQUIPMENT Former Jungheinrich full-service unit 3rd and 4th valve Free-lift mast Fork spreader with side shifter Full cabin Heater Fpjdez Iwnpopfx Ap Den Windshield wiper LED work light (front) Comfort seat All dimensions are approximate values. No warranty is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift truck available on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 140

Condition: defective spare-parts repository (used), functionality: unexamined, Year of construction: 2017, Cesab S316L high-lift pallet truck, manufactured in 2017, operating hours unknown, load capacity 1600 kg, overall height 2362 mm, lifting height 5400 mm, free lift 1336 mm, initial lift, load guard, foldable operator platform with protective bar, lithium-ion battery with charger, serial number 6497967. The lithium battery is in good condition, but no power is reaching the control panel; therefore, it is being sold as defective. Fpodjz Rm Tbepfx Ap Den

Condition: excellent (used), Year of construction: 2018, We are selling our Faro Quantum S measuring arm, including the Polyworks software package. Year of manufacture: 2018, last calibration: 2024. Comes with various accessories. Ready for immediate use. Fpsdpfx Asz Rkncsp Don

Condition: used, Year of construction: 2021, functionality: fully functional, power: 90 kW (122.37 HP), cutting height (max.): 165 mm, cutting width (max.): 1,350 mm, BOARD EDGER AND MULTI RIP SAW VR 1300 S with servo controlled blade positioning • Production year: 2021 • Main motor: 90 kW • Max. board width: 1350 mm • Max. cutting height: 165 mm • Servo-controlled fast blade positioning Fpsdpfx Ajz D S Ddsp Djn • 4 movable saw units with lasers • 3 fixed laser guides • 10" touchscreen control with MEBOR software • Additional 500 mm multi rip saw head with spacers Machine is sold with infeed conveyor. Outfeed conveyor is not included.

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, Ishida mod IX-GN-4043-S X-ray machine whit rejector year of construction 2017. Belt width 44 cm. Fpodpfx Aoz I S Epop Dsn

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 ST. Gebr. Zwei Komponenten Spritzgiessmaschine das zweite Aggegeat ist seitlich angebau Hersteller: NETSTAL Typ: SYNERGY 1750-900-230 Baujahr: 2016 Schließkraft: 175 Tonnen Holmabstand: 510 x 510 mm Fedpjz Nmi Hefx Ap Dopn Schneckendurchmesser 1: 50 mm Spritzteilgewicht 1: 377 g/PS Schneckendurchmesser 2: 25 mm Spritzteilgewicht 2: 47 g/PS Ausstattung: Kernzüge 2 x DS / 1 x AS Zweites Aggregat ist seitlich angebaut Roboter Wittmann, Baujahr: 2016

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: Check machine nameplate for serial number, grinding wheel width: 125 mm, grinding wheel diameter: 400 mm, total height: 2,320 mm, total width: 4,600 mm, total length: 6,500 mm, grinding length: 120 mm, type of input current: three-phase, rotational speed (max.): 7,200 rpm, feed length X-axis: 120 mm, feed length Y-axis: 15 mm, workpiece diameter (max.): 30 mm, input voltage: 400 V, Equipment: rotational speed infinitely variable, German Mikrosa Precision CNC Infeed Centerless Grinder MIKROSA KRONOS S 125 Model built late 2013, 1 unit available Capable of complex profile grinding with superior grinding quality and outstanding stability. Equipped with automatic robotic loading & unloading system, wheel dynamic balancing unit and rotary dresser. The machine has always been maintained by official MIKROSA service engineers. Commissioned at the end of 2013. Production ceased in 2019. The machine has remained powered on and kept under warm-running condition ever since. Workpiece diameter range: 0.5 ~ 30 mm • Max workpiece length for infeed grinding: 120 mm • Grinding wheel: Ø 400 x 125 x 203.2 mm • Regulating wheel: Ø 250 x 125 x 127 mm Fedpfszqx Apsx Ap Djpn

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 7,990 kg, CHIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a comprehensive factory overhaul by CHIRON For sale is a CHIRON FZ 18 S MAGNUM High Speed vertical CNC machining center manufactured in 1998. The machine is equipped with Siemens SINUMERIK control, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also has an oil mist extraction system with a filter. The most important advantage of the offered machine is the comprehensive inspection and overhaul carried out in 2020 by CHIRON. As part of the work, key machine components were replaced, including: Fjdozdkhqopfx Ap Dopn spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available for the work performed, confirming the scope of the overhaul. Technical data: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the comprehensive overhaul carried out by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.