Used Internal Thread Gauge for sale (12,838)

Condition: excellent (used), Internal precision measuring device Chjdpfx Asvwau Robzsd Brand Mitutoyo Measuring range 35-60 mm (28578) Type 511-168

Condition: good (used), Year of construction: 2018, Internal item no.: 25043 5-Axis CNC Machining Center POSmill H 500 U Year: 2018 Just approx. 1,000 spindle hours since spindle replacement Machine total approx. 20,500 hours Spindle replaced in 2024 (18,000 rpm) Geometry realigned in 2024. Travel axes: X 650 / Y 850 / Z 500 mm Rotary table: 360° infinite Control: Heidenhain iTNC 530 Spindle: 18,000 rpm Spindle interface: HSK-A63 The machine is equipped as follows: 60-position tool changer Through-spindle coolant (20 bar) with belt filter system Compressed air through the spindle Kessler rotary table, diameter 500 mm Infrared 3D part measurement probe Tool measurement via BLUM laser Rotating inspection window POS DCM collision module Mobile electronic handwheel Oil mist extraction system Heidenhain linear measurement system X, Y, Z Purge air for all linear measurement systems Active control cabinet air-to-air cooler Chsdpfewz I Acsx Abzsd Active cooling for 4th + 5th axis, controlled Network connection + USB port Controlled spindle cooler Heidenhain rotary measuring system Contour protection POSkontur External hinge belt chip conveyor Coolant pump at the head, operated via M-functions Pump for chip flushing device Chip flushing device Machine status indicator light Spindle air purge Electromechanical oil/coolant separator Automatic coolant level monitoring 3-fold media interface in the center of the table Hydraulic unit incl. control via M-function Connected load: 60 kVA Installation dimensions: W 4800 / D 4600 / H 3000 mm + Through-spindle coolant unit (LxWxH): 2200 x 1300 x 1400 mm Weight: approx. 13,000 kg The machine is in very well-maintained condition and comes from a small, family-run business. In 2024, the spindle was replaced and the geometry was set (guides repaired and adjusted). Since then, the machine has seen only minimal use.

Condition: ready for operation (used), Year of construction: 2000, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 00, cooling capacity: 30 kW (40.79 HP), type of input current: three-phase, type of cooling: water, ambient temperature (max.): 40 °C, ambient temperature (min.): 5 °C, input voltage: 400 V, pressure: 3 bar, pump pressure: 3 bar, Water coolers connected to a single central water supply; coolers can also be used with an internal water tank For sale due to surplus capacity Coolers recently serviced and converted to R422D (next service Sept 2025) Coolers are still operational and can be shut down at any time Total of 2 units for sale Chodexphazspfx Abzjd

Year of construction: 1997, condition: used, thread dia. 1/16 - 2 " threading length 165 mm turning speed range 40 - 53 U/min Cjdpfxexc Nxrj Abzjhd voltage 230 V total power requirement 1,7 kW weight of the machine ca. 50 kg - Serial-No.: 34024750 - foot switch

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment Cedpexc T Udsfx Abzohd -Tapping chuck: MK3 mount -Type: unfortunately without type designation -Bore: Ø 13 mm -Dimensions: Ø 68 x 193 mm -Weight: 1.6 kg

Condition: good (used), Year of construction: 1956, machine/vehicle number: 5866, POLYGRAPH thread sewing machine 39 3/4 /2, machine number 5866, working width 39 cm, year of manufacture 1956, in good condition, immediately available. If interested, we will also be happy to inform you about other machines in our inventory. Chedpfxoxbzgxo Abzed You are welcome to inspect the machine at our premises by prior appointment.

Condition: excellent (used), Thread cutting steel (28397) Make Komet type FG II 60 degrees Cjdpfxemk E Ubj Abzehd with steel holder type RB ST III unused, from magazine

Condition: new, Bernardo TM 16 BLO/ R 1100 Electric thread cutting machine Technical specifications Tapped holes* M3 - M16 Speed max. 120 - 325 rpm Adjustable angle 0° - 90 Max. Working radius R 1100 mm Quick change chuck DIN 371: M3 / M4 / M5-6 / M8 / M10 DIN 376: M12 / M14 / M16 Motor power 600 W Voltage 230 V weight approx. 26 kg * Material strength 400 N / mm2 Scope of delivery Operation via touch screen Digital drilling depth display Micro spray system Blow-out device Quick change chuck Quick change chuck according to DIN Electric motor 90° angle adjustment Chsdpjpag Npefx Abzed Mounting flange Features Standard with micro-spray system for constant cooling and minimal cooling lubricant consumption Including blow-out device for removal of chips, thus optimal view of the drill hole Including quick-change chuck for the use of taps for through and blind holes Swiveling motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed right angle (90°) High productivity, significant time savings compared to manual thread cutting Quick-change chuck with integrated slip clutch prevents tap breakage Including swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base 900 x 600 mm with 2 drawers for TM series 830,00

Condition: excellent (used), Offer consisting of: Aster 180, built in 2006, Max. speed: 180 cycles/min - Min. sheet size: 75 x 150 mm - Max. sheet size: 320 x 420 mm Chjdpjwb Uwyofx Abzed

Condition: good (used), Year of construction: 2007, workpiece dia. 1400 mm Chjdpswzmqrofx Abzed boring diameter 100-500 mm control Sinumerik 840D

Condition: good (used), Thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: WMW ABW, thread cutting chuck holder MK3 -Type: GB3 Chsdjxc T Tgjpfx Abzod -Dimensions: Ø 80 x 262 mm -Weight: 3.3 kg

Condition: like new (used), functionality: fully functional, tool type: VDI 40, overall weight: 10 kg, At a glance  Extremely compact construction for critical length threads  Thanks to disengaging clutch thread length is precisely controlled  One single head for internal and external threads  Integrated coolant supply (with coolant feed through centre on request)  Available in  ANGST Flex or ESX (ER) Collets  Sizes 1, 2, 3, 4 and 6 Csdpsxltzvofx Abzjhd  All usual shanks e.g. cylindrical, cylindrical with flat (Weldon), DIN 69880 / VDI 3425, SK DIN 69871, BT (Japan Standard MAS 403), ISO Caterpillar and Morse taper  Heavy-duty and durable Swiss quality products PAFIX Tapping Head for CNC machines  The PAFIX CNC head has been designed especially for all machines with programmable forward and return feeds to the toolholder (turret, spindle, etc.). It is of extremely compact length and is fitted with a positive disengaging clutch which can be set to 3 different pull-out lengths if required, for example with head size 25-2…, 1,5/3/5 mm.  The head can be set to two different programmed tapping cycles as follows. Both cycles ensure a certain amount of pitch compensation (float). In order to make sure of faultless thread cutting with precise starting point and depth or length of the thread, no spring take-up thread lead or friction clutch against overload has been provided. The PAFIX CNC is designed to permit a quick change over from tapping head to die head. Simply unscrew the collet nut and replace with the die housing.

Condition: excellent (used), Setting standards for micrometers Brand Mitutoyo 167-903 (28639) Standard settings for micrometers in a set from 25-275 mm 11 pieces Chodpfxswn E Ivs Abzod

Condition: ready for operation (used), center height: 175 mm, grinding length: 600 mm, ★ TOP maintained machine from the liquidation of a renowned toolmaker – be sure to check our other listings as well ★ ★ KELLENBERGER 600U-175 internal and external cylindrical grinding machine with extensive accessories ★ Year of manufacture: Presumably 1987 Machine number: 32.467.2987 Condition: Not tested Delivery terms: Free loaded on truck – unpacked Location: 73347 Mühlhausen Availability: Early December 2025 – The items must be collected by the buyer in calendar week 49 / 2025 without exception. The specific date will be determined by us. Earlier availability may be possible upon agreement. Payment terms: Advance payment by bank transfer Internal no.: JO8 Under power for inspection: YES ⚙️Technical data Centre distance: 600 mm Centre height: 175 mm Maximum workpiece diameter: 349 mm Max. grinding wheel dimensions: 400 x 50 x 127 mm Motor power (grinding spindle): 3 kW Grinding spindle speeds: 1500 / 1700 / 2200 rpm Workpiece headstock speed: Infinitely variable 20–400 rpm Total power requirement approx.: 6 kW 380 V / 50 Hz / 10 A With internal grinding device With very extensive accessories as shown in photos Further data can be found in the pictures Scope of delivery Available manuals Very extensive accessories as per pictures Dimensions & weights Installation dimensions L x W x H approx.: 2500 x 2000 x 1600 mm + accessories on pallets Weight approx.: 2500 kg If you have any questions or would like to arrange a viewing, please feel free to contact us. ⚠️ Be sure to check our other listings as well ⚠️ Chodoxiy N Ujpfx Abzod Additional notes: ► We expressly recommend collection via direct transport (haulage company) ► The goods are sold excluding any warranty ► Technical data without guarantee ► Subject to prior sale ❗ The goods are exclusively sold to business customers ❗

Condition: excellent (used), For sale: Professional measuring set from the Japanese company Mitutoyo, model SBM-25CXST (cat. no. 568-925). This set is designed for precision measurement of hole diameters and cylindrical parts in the range from 12 to 25 mm. Set contents: Mitutoyo ABSOLUTE Digimatic digital bore gauge with LCD display; Three measuring heads: 12–16 mm, 16–20 mm, 20–25 mm; Setting rings: Mitutoyo 19.997 mm and HK66 19.001 mm; Extension rods and additional accessories; Original Mitutoyo wooden case with custom foam insert. The ABSOLUTE system ensures stable measurements and no need for re-zeroing every time the device is switched on. Digital readout provides quick and reliable measurements with high accuracy. The set is in very good condition, complete and ready for use. Ideal for measurement laboratories, quality control, and tool workshops. Chodsw R E Hvspfx Abzed

Condition: used, Year of construction: 2006, max. workpiece diameter 830 mm workpiece length - max. 600 mm output 7,5 kW The workpiece spindle unit (U/B1) has a travel range of 300 mm for the U-axis and a swivel angle of -1° to +12° for the B1-axis. The infinitely variable speed ranges from 1 to 795 min-¹. The set-up speed (jogging) is 10 min-¹. The spindle head size corresponds to A 8 according to DIN 55026 and the through- hole has a diameter of 58.5 mm. The maximum workpiece diameter is 830 mm, the maximum workpiece length is 600 mm. The maximum load capacity on the spindle head is 6,100 N. The internal grinding unit (Z1/X1/B2) has a Z1 axis travel of 800 mm and an X1 Chodpfxewzmrco Abzjd axis travel of 150 mm. The swivel angle of the B2 axis is 270°. The drive of the internal grinding spindles is infinitely variable and has an output of 7.5 kW. The mounting hole for the sanding block has a diameter of 100 mm. The maximum sanding diameter is 600 mm, as is the sanding depth. The manual longitudinal adjustment of the internal sanding axis on the table is 530 mm.

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: Pittler, self-opening thread cutting head -Type: Model A 3 L 1018/20 -Cutting jaws: not included -Bore: Ø 31/24 mm -Hole: Ø 40 mm -Dimensions: 130/125/H170 mm Cedpfxjxc T Rlj Abzehd -Weight: 3.6 kg

Condition: excellent (used), Thread cutting steel (108141) Make Comet Type FG 2 for external thread With threaded steel 60 degrees and threaded steel 55 degrees in wooden case Chedpfx Absigqr Rezsd

Condition: excellent (used), • Sturdy, stable aluminium base • Two guides for smooth travel • LCD display with clear readout • Functions: ON/OFF, ZERO, HOLD, PRESET Chsdpfew Rdt Isx Abzsd • Original “Made in Japan” quality • Readable serial number – authenticity guaranteed • Very good condition – used, tested equipment • No play, accurate and repeatable measurement • Ready for use – no additional accessories required An excellent tool for workshops, toolrooms, quality control departments, and precision measurement tasks.

Condition: excellent (used), Mitutoyo internal precision measuring instrument (28577) Type 511-167 Measuring range 18 - 35 mm Codpjvu T Apjfx Abzjhd

Condition: excellent (used), Depth gauge Make Sylvac SA (108145) Type JP 500/0.01 Measuring length 500 mm Measuring accuracy 0.01 mm Length of measuring bridge 150 mm Chjdpfx Asvcl Rzsbzjd

Condition: excellent (used), Tap for pipe thread Make May Type : R 3 3/4 inch Cedpfefhdwqsx Abzehd Total length 185 mm

Condition: used, Taps for pipe thread Before and finished Schneider Csdpfx Absdk Rdvezjhd R 2 3/4 inch

Condition: used, Diameter 48 mm Bilz thread adapter Codpfx Absb Tyqpezehd Diameter 63 mm Variolock connection Length 160 mm Total length 180 mm 2 pieces available

Condition: excellent (used), Shrinkage Caliper gauge Make Preisser Measuring length 300 mm Shrinkage : 1,75% , 2% , 2,5 Chjdpefhkdtsfx Abzod