Used Internal Thread Gauge for sale (12,852)

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Bwjdpouz If Njfx Abzjw Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: good (used), Year of construction: 2008, operating hours: 2,500 h, load capacity: 1,200 kg, lifting height: 1,400 mm, fuel type: electric, mast type: duplex, construction height: 2,100 mm, mileage: 2,500 km, The WIDE-TRACK stacker from the brand is from 2008 and in good condition; Capacity 1,200 kg; Lifts up to a height of 1,400 mm. Clearance height is 2,100 mm. Only 2,500 operating hours; Equipped with stainless steel forks! Outside fork width 88 cm, inside 69 cm; Gel battery is maintenance-free and comes with external charger. Watch the video on YouTube. Bwedpew Nk Susfx Abzew

Condition: good (used), Year of construction: 2008, Precision air measuring mandrels/rings, air measuring device, measuring columns and measuring computers, pneumatic-electric measuring column, measuring device, manual measuring device -Manufacturer: Stotz, manual measuring device air measuring device -Probes/measuring accuracy: see photos Bwedeipapiopfx Abzow -Individual components: see photos -Mains voltage: 3x400 VAC / 50 Hz -Compressed air: 3.0 bar -Total dimensions: 2800/800/H2450 mm -Total weight: 702 kg

Condition: ready for operation (used), Year of construction: 2002, cnc num machine rebuilt in 2002 front-end unit Bwedot E N Dmepfx Abzew max. grinding diameter 200MM max. grinding stroke 200MM max passage diameter 500MM weight 4500KGS

Condition: ready for operation (used), Ridgid 1224 Threading Machine, Thread Cutter, Used Machine Overall dimensions: Length: 1140 mm Width: 720 mm Bwodpfxjwwgvyo Abzjw Height: 1110 mm Capabilities: Pipe threading: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) with 161 geared threading attachment. Bolt threading: 1⁄4″ – 2″ (6 – 52 mm). Features: Threads 1⁄4″ – 2″ pipe at 36 RPM and 2½″ – 4″ pipe at 12 RPM. Model 1224 is suitable for threading various types of pipes including black, galvanized, plastic-coated pipes, as well as stainless steel, IMC, and heavy-wall pipe and rod up to 30 Rockwell C hardness. Induction motor ensures noise levels remain within regulatory limits. Special capacitor start/capacitor run motor allows full-range threading even under voltage drop conditions. Uses a 1⁄4″ – 2″ universal die head and a 2½″ – 4″ adjustable die head to cut tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpieces via head-through oiling. Technical specifications: Motor: 1.1 kW, single-phase, 50 Hz, induction type. Switches: Reverse / Off / Forward heavy-duty rotary switch and integrated foot pedal. Spindle speed: 36/12 RPM. Gearbox: Two-speed transmission with 3:1 ratio. Chuck: Hammer-type with replaceable inserts. Rear centering device: Cam-operated. Pipe cutter: Model 764, fully self-adjusting and self-centering, with 1⁄4″ – 4″ F-229 cutting wheel. Reamer: Model 744, bladed type, 1⁄4″ – 4″. Lubrication: Through the die head. Pump: Self-priming, gear-type, automatic reversing, with constant flow.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, SPECIFICATION MODEL HK-40 ROLLING FORCE(KN) 10-400 Bwodpov Iapijfx Abzsw SPEED RANGE(RPM) 17-53 MAX. DIE LENGTH(MM) 230 WORKPIECE DIA(MM) Ø4-Ø120 MAIN ENGINE(KW) 18 TOTAL POWER(KW) 21.3 MIN MAX TOOL DIA(MM) Ø160-Ø210 DIE SPINDLE DIA(MM) Ø69,85(Ø80 OPT.) MAX PITCH(MM) 7 SWIVEL ANGLE ±12 WEIGHT(KG) 4800

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 620050039, overall weight: 2,550 kg, Thread rolling machine PeeWee type P20SR, used, well-maintained, low operating hours (no hour meter installed), fully functional. Can be inspected and tested under power. Forklift loading included. Includes operating manual/wiring diagram. Includes 20 sets (40 pieces) of thread rolling dies (new price per set approx. €1,100). Bwjdpfx Aboxalinezjw

Condition: used, Year of construction: 2015, thread dia. 20 - 80 mm grinding length 3500 mm thread pitch . mm threading lenght min./max. 50/3500 mm centre height 400 mm workpiece length - max. 4000 mm control Siemens 840-Dsl feed speed u-axis 0 - 2500 mm/min feed speed w-axis 0 - 2500 mm/min feed speed b-axis 100 1/min total power requirement 45 kW weight of the machine ca. 24 t dimensions of the machine ca. 10,7 x 4,6 x 2,9 m Thread Grinding Machine / Profile Grinding Machine, suitable for: - the thread grinding of single and multi-start ball screws with gothic profiles and special profiles - Ø 20 to 80 mm with a grinding wheel Ø of 350 to 500 mm - length between the centers up to max. 4000 mm Equipment / Accessories: - grinding spindle: - capacity 14 kW - with a grinding wheel diameter range of 350-500 mm, cutting speeds between 20 and 75 m/s can be set. - grinding wheels: - diameter new 500 mm - diameter worn 350 mm Bwjdpfsw Ed S Uox Abzew - bore diameter 203.2 mm - shaped diamond roll: - diameter 121.3 mm - radius 0.5 mm - driver flange for workpiece diameter 15-70 mm - driver: - for 10-32 mm drive diameter on the workpiece - for 31-60 mm drive diameter on the workpiece - for 60-105 mm drive diameter on the workpiece

Condition: used, Year of construction: 1973, min./max. hole to grind 8 / 10 mm max. grinding depth by internal grinding 150 mm swing dia. 450 mm workpiece spindle bore 35 mm max. swivability 30 ° min/max. table longitudinal travel 5 / 150 mm/min Internal Grinding Machine | D14 - 1973 The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Bsdpfx Aet Rlguobzjww - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: D-14 | D 14

Condition: excellent (used), I am selling in very good condition, Kroeplin D450. Bjdpfxjuhh Ubj Abzeww

Year of construction: 1998, condition: excellent (used), Technical detils : - Capacity - 500 nails/ min. Bodpfx Ajh Hp H Sobzoww - Power - 7 kw - Wire range - 1,0 - 4,2 mm - Nails lenght - 30 - 150 mm - Year - 1998

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Bedpfx Absw Sxyxezjww

Condition: used, Internal grinder VOUMARD 5S Bwjdpfeu Hac Dex Abzsw

Condition: like new (used), functionality: unexamined, Attachment for cutting female threads, with MAS cam automaton. Originally packed, unused. Bwsdpfx Abjw N Ta Iozsw

Condition: good (used), Thread cutting machine, pipe thread cutter -for: pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gears -Dimensions: 550/360/H240 mm -Weight: 55 kg Bsdpfxeb A Iyae Abzsww

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 280 0113 4023, THE MACHINE CAN BE VISITED AT OUR PLANT IN BOLOGNA. Bwsdewd Shhjpfx Abzjw

Condition: excellent (used), This spot tacking machine is used for several operations in the ladie´s and men´s outer wear industry: Woven labels can be tacked as well as turned-under hems or edges and turned-up trouser bottoms. It´s durable blind spot tacks do not leave any marks on the outside of the garment. Due to optional equpment this machine can get converted for other applications. Bedev Ty Hlspfx Abzjww

Year of construction: 1969, condition: ready for operation (used), Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible. Bwsdpfoqzkdmox Abzsw

Condition: used, TECHNICAL DETAILS - Grinding diameter : 3 / 80 [mm] - Grinding depth : 80 [mm] - Max. part length : 250 [mm] - Max. part diameter : 240 [mm] - Centers height : 130 [mm] - Part-holder headstock swiveling : -5 / +60 [°] - Bar clearance : 25 [mm] - Metric shaft nose internal taper : 40 - Part-holder spindle speed with continuous adjustment : 350 / 1.200 [Rpm] - Strokes X/Z : 50 / 300 [mm] - Installed power : 17 [kW] - Dimensions (LxDxH) : 200 x 180 x 160 [cm] - Machine weight : 2.200 [kg] EQUIPMENT - Automatic downfeed - 1 VOUMARD M45DR internal spindle : 45.000 [Rpm] - Automatic parts loader - Hydraulic wheel dresser - 3 jaws chuck Bwsdpfx Abeuhbmkezew - Coolant tank * with coolant through part center

Condition: good (used), JUNG D22 / Internal Cylindrical Grinding Machine - Machine suitable for internal cylindrical grinding and face grinding - Smallest machinable bore: 14 mm - Largest machinable bore: 150 mm - Grinding length without face grinding attachment: 250 mm Bedpfx Ajw Sv Dhsbzeww - Grinding length with face grinding attachment: [information not provided] - 6 workpiece spindle speeds: 46–270 rpm - Spindle head swivels left/right: 30 degrees - Distance from spindle axis to table center: 250 mm - Maximum distance between workpiece spindle and grinding support: 935 mm - Spindle head adjustable/skewed up to 30 degrees each - Worktable adjustable/skewed forward/backward up to 5 degrees each - Manual / automatic operation - Taper grinding attachment - Steady rest - 3-jaw chuck - Spare grinding spindles Dimensions: LxWxH: 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: good (used), thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting apparatus -Manufacturer: Lenze ABW, tapping chuck MK3 -Type: GB3 -Bore: Ø 24 mm -Dimensions: Ø 80 x 265 mm Bjdpfsvvub Asx Abzeww -Weight: 3.7 kg

Year of construction: 1988, condition: ready for operation (used), Connected load: 9.5kVA, was maintained regularly, an inspection is possible. Bsdpfx Absnk Uxvozeww

Condition: used, TECHNICAL DETAILS Bedpfx Absu Hac Rozjww - max. grinding length: 500 [mm] - max. grinding diameter: 3000 [mm] EQUIPMENT - 1 grinding spindle 12000 [t/mm] - retractable wheel dressing device - coolant tank with pump and paper filtration

Condition: good (used), Shell end mill, indexable insert mill, hedgehog mill, tool holder, milling holder, milling tool, internal deburrer -for diameters: 20 - 60 mm Bwsded Sdl Ijpfx Abzow -Recording: MK 3 -Quantity: 1 piece internal chamfer cutter available -Price: per piece -Dimensions: Ø 70/208 mm -Weight: 1.7 kg/piece

Condition: used, TECHNICAL DETAILS - Grinding length : 120 [mm] - Center height : 102 [mm] - Strokes (X/Z) : 450 x 200 [mm] - Max speeds (X/Z) : 12 [m/min] SPINDLE SUPPORT - Spindle number : 2 WORKPIECE HEADSTOCK - Max. workhead speeds : 1500 [rpm] - Spindle clearance : 28.6 [mm] Bwjdpfx Ajuhbmqsbzjw - Power : 1.4 [kW] - Mounting tape r: A2.4/CM5 - Torque : 150 [Nm] - Manual B axis angle : +/- 2 [°] - C axis : 0.0001 [°] POWER SUPPLY - Installed power: 34 [kVA] DIMENSIONS - Floor dimensions : 3600 x 2800 [mm] - Machine weight : 2600 [kg] MACHINE HOURS - Number of hours under power : 26781 [h] EQUIPMENT - Fanuc Oi-TD control - Spindle centre coolant - Cooling unit for spindle cooling - Loading robot - 2 spindles available : 59.600 - 41.600 [rpm] - Dressing turbine