Used International 1754 for sale (8,873)

Year of construction: 1964, condition: refurbished (used), machine/vehicle number: 2041, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI8DT1 Machine No.: 2041 Year of manufacture: 1964 weight: 3,2 to broaching force: 8.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 25 A Connected load: 5,5 kW Lodpfxjgyd S Do Abterr The machine is completely revised and is therefore in a very good condition.

Year of construction: 1960, condition: not inspected (used), Forst RF 20x2000 internal broaching machine -WKG 189- Data: Manufacturer: Forst Type: RF 20x2000 Year of manufacture: 1959 Max. Tractive force: 20t Max. Stroke: 2000mm Max. Cutting speed: 5,6m/min Max. Return speed: 30m/min Max. Workpiece diameter: Ø 300mm Max. Tool diameter: Ø 90mm Weight: 3,5t Remark: without tub Ljdpohu E Egefx Abterr

Condition: not inspected (used), Forst RF 16 internal broaching machine -WKG 1371- Technical data: Manufacturer: Forst Type: RF 16 Max. Tractive force: 16t Lredpfx Abehu E N Detsr Max. Stroke: 1200mm Max. Cutting speed: 5,6m/min Max. Workpiece diameter: Ø 700mm Max. Tool diameter: Ø 120mm Workpiece seat: Ø 70mm Note: control valve missing

Year of construction: 1990, condition: excellent (used), Manufacturer: Arthur Klink Year of manufacture: 1990 Model: RISZ 16 x 1250 x 400 / HG Technical data: Vertical internal broaching machine in technically very good condition tractive force: 16.000kg clearing speed: up to 27,5 m/min infinitely variable return speed: up to 34 m/min infinitely variable maximum stroke: 1250mm broaching units: 4 pieces Lodjlpadyjpfx Abtjrr accessories: - automatic tool changer - automatic part feeding (part specific) - hydraulic tool clamping device (part specific) Remark: High performance production broaching machine for high volume production with high cutting speed!

Year of construction: 1965, condition: good (used), functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Ljdpfx Abstuuvzeterr Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Accessories - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Year of construction: 1980, condition: used, Max. tensile force: 10 tons Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 27 m/min Max. workpiece diameter: 320 mm Number of units: 3 Weight: 4.8 tons Automatic tool feeder Hydraulic draw-in head and end piece holder locking system Automatic feeding device for workpiece diameters up to 100 mm Ledpfx Ascdtplebtsrr Magnetic belt chip conveyor

Year of construction: 1960, condition: used, max. pulling force: 20,000 kg max. stroke: 1250 mm max. cutting speed: from 1 m/min to 7 m/min max. return speed: from 5 m/min to 25 m/min max. workpiece diameter: approx. 140 mm max. tool diameter: approx. 50 mm Number of tool stations: 2 The machine is equipped with a 2-station rotary indexing table. The machine is equipped with an automatic tool feeder and is designed for manual series production. Lredpfx Ajui Sbjbtor The tool locking mechanism in the drawbar and in the tool feeder is spring-loaded (pull head according to DIN 1417).

Year of construction: 1959, condition: used, max. tensile force: 16 tons Lodj Rwa Ujpfx Abtsrr max. stroke: 1250 mm cutting speed: 5.6 m/min return speed: 30 m/min

Year of construction: 1956, condition: used, machine/vehicle number: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 KG Machine No.: 1413 General / technical data: Used vertical hydraulic internal machining machine with up to 3 machining stations, in ready-to-use condition. Pulling force: 13000 KG (maximum) Machining length: 1200 mm Machining stations: 3 Distance between machining stations: 100 mm Mounting diameter for the draw head: Ø 85 mm Passage width between the cylinders: max. 390 mm Cutting speed: hydraulically continuously adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically continuously adjustable from 7 m/min to max. 25 m/min Machine footprint: (w x d x h) approx. 1150 x 1500 x 3725 mm (tool delivery system extended) Power supply / rated power: 380 V 50 Hz / 7.5 kW Accessories / special equipment: The machine's draw bridge has 3 tool holders for machining tools, and the workpiece table has 1 machining station (can be modified). The tool clamping system and the tool delivery system are designed for a spring-mechanical locking system (DIN 1415). The machine has an automatic tool delivery system, and the existing mount for the tool delivery system is also designed for only 1 tool (middle machining station). Ledpodbmgmofx Abtjrr The machine has an integrated coolant system for cutting oil. Remarks: The machine is in good condition for its age and is ready for immediate use. It is designed for manually operated production use with medium batch sizes. The machine has an automatic cycle. For use, a machine pit or, alternatively, a platform is ideally required. Draw heads, tool holders, and tools are available upon request. The machine can be inspected in our warehouse while powered up.

Year of construction: 1951, condition: good (used), machine/vehicle number: 1133, horizontal hydraulic broaching machine Karl Klink (our Ref No. WKG 1678) machine type: horizontal internal hydraulic broaching machine manufacturer: Karl Klink type: RW 10 built in: 1951 stroke 1500mm pulling force: 10.000KG working stations: 1PCs drive: hydraulic system equipment: coolant system Ledpedcdrpefx Abtorr Optional accessories available on request: Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3.000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1980, condition: good (used), machine/vehicle number: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine no.: 03.2123 General / technical data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition. Pulling force: 25000 KG Broaching length: 2000 mm Number of broaching stations: 3 Lrsdpfx Asdffzfjbtor Distance between broaching stations: 160 mm Mounting diameter for broach holders: 3 x Ø 100 mm Clearance width between cylinders: Nominal size 500 mm Measured clearance width between cylinders: max. 590 mm Cutting speed: Hydraulically continuously adjustable from 1 m/min to max. 10 m/min Return speed: Hydraulically continuously adjustable from 5 to max. 25 m/min Machine footprint: (w x d x h) approx. 3400 mm x 3400 mm x 6900 mm (without pit) Power supply / connection value: 380 volts 50 Hz / 22 kW Accessories / special equipment: The machine is currently without a workpiece table. A workpiece sliding table was mounted on the machine, with a special workpiece clamping device for external broaching. (Workpiece sliding table can be modified). The tool clamping system is equipped with a hydraulic locking mechanism in the pull bridge and in the feed mechanism. The machine has a coolant system with an integrated chip conveyor. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production, and for optimal use, a foundation (pit) is ideally required. Broach holders and pin ejectors are available upon request. The machine can be inspected at our warehouse.

Year of construction: 1958, condition: used, machine/vehicle number: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of manufacture: 1958 Weight: 2500 KG General / technical data: Used vertical hydraulic internal cutting machine with 1 cutting station, in operational condition Pulling force: 6000 KG Cutting length: 1000mm Mounting diameter of the draw head: Ø 85 mm Passage width between the cylinders: max. 280 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to max. 25 m/min Machine footprint: (w x d x h) approx. 1000 x 1200 x 2800mm Lredpfxeda Ugio Abtsr Power supply / connection value: 380Volt 50 Hz / 4KW Accessories / special equipment: The machine is equipped with a workpiece table for 1 cutting station. The tool clamping system is designed for a spring-mechanical locking mechanism (DIN 1415). The machine has an integrated coolant system. A double draw head for 2 flat cutting tools with a workpiece support plate is available. Remarks: The machine is in good condition for its age and is ready for immediate use. It is designed for manual operation in production with medium batch sizes. Ideally, a machine pit or, alternatively, a platform is required for operation. Draw heads are available upon request. The machine does not have a tool feed system. The machine can be inspected in our warehouse while it is powered.

Year of construction: 2018, operating hours: 303 h, condition: refurbished (used), functionality: fully functional, The internal engraving system delivered by Cerion GmbH in 2018 has seen almost no operating hours. The laser is in as-new condition. The original purchase price of the system was €49,000. Supra Laser Solutions GmbH is the successor to Cerion and Cericom GmbH in the field of internal engraving. The system is factory-tested and fully functional. A 12-month warranty is provided on the system, including the laser. Ledpjxvc Igsfx Abtorr

Year of construction: 1971, condition: excellent (used), Horizontal internal broaching machine Arthur Klink RIW 16x1800 -WAG 718- Ledpfx Aehpqqusbtorr Manufacturer: Arthur Klink Type: RIW 16 x 1800 Year of manufacture: 1971 Max. Tractive force: 16t Max. Stroke: 1800mm Max. Cutting speed: 7m/min Max. Return speed: 25m/min Max. Tool diameter: Ø 95mm Weight: 4,8to

Year of construction: 1993, condition: good (used), machine/vehicle number: 03.2370, Arthur Klink - internal broaching machine (WAG 748) Lrsdjcc D Ddjpfx Abtor machine type: internal vertical hydraulic broaching machine manufacturer: Arthur Klink type: RISZ 10 x 1000 built in: 1993 stroke: 1000mm pulling force: 10.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, magnetic chip conveyer remark: machine under power in stock the machine has an automatic workpiece loading system for 2 workpieces, ideal useable for high production Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Lsdpfjrntirsx Abtsrr Feed speed (Y): 100 mm/min Viewing appointments possible at short notice by arrangement !!! With kind regards R.Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Condition: like new (used), functionality: fully functional, tool type: VDI 40, overall weight: 10 kg, At a glance  Extremely compact construction for critical length threads  Thanks to disengaging clutch thread length is precisely controlled  One single head for internal and external threads  Integrated coolant supply (with coolant feed through centre on request)  Available in  ANGST Flex or ESX (ER) Collets  Sizes 1, 2, 3, 4 and 6  All usual shanks e.g. cylindrical, cylindrical with flat (Weldon), DIN 69880 / VDI 3425, SK DIN 69871, BT (Japan Standard MAS 403), ISO Caterpillar and Morse taper  Heavy-duty and durable Swiss quality products PAFIX Tapping Head for CNC machines  The PAFIX CNC head has been designed especially for all machines with programmable forward and return feeds to the toolholder (turret, spindle, etc.). It is of extremely compact length and is fitted with Lrjdpfx Absxltzvstor a positive disengaging clutch which can be set to 3 different pull-out lengths if required, for example with head size 25-2…, 1,5/3/5 mm.  The head can be set to two different programmed tapping cycles as follows. Both cycles ensure a certain amount of pitch compensation (float). In order to make sure of faultless thread cutting with precise starting point and depth or length of the thread, no spring take-up thread lead or friction clutch against overload has been provided. The PAFIX CNC is designed to permit a quick change over from tapping head to die head. Simply unscrew the collet nut and replace with the die housing.

Condition: used, Year of construction: 1971, grinding depth: 150 mm, grinding diameter: 80 mm, inner diameter: 80 mm, Manufacturer: OVERBECK Model: 250 I Year of construction: 1971 Workpiece clamping diameter: max. 140 mm Clamping length: max. 150 mm Grindable bore length: 150 mm Bore diameter: max. 80 mm Surface grinding device can be swiveled in by hand Coolant tank with pump without grinding spindle and drive motor Lrjdpfx Aeu Ef Dqobtjr was last operated with compressed air spindle Weight: approx. 1400 kg

Condition: used, Rotary indexing thread tapping machine, 8-station rotary table. 1 inspection station, 1 vertical and 1 horizontal thread tapping unit. With guide bush 1 mm pitch Chiron, thread tapping unit with guide bush 0.7 mm pitch, M4. One discharge station, coolant system. Lodpfxoyl Ntpj Abtorr

Condition: new, Hydraulic tapping machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Ledpfx Abetbawksterr Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic tapping machine Incl. machine base with clamping disk Mobile Hydr. pressure gauge Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Year of construction: 1972, condition: used, Max. pulling force: 10 tons Max. stroke: 1250 mm Lrsdpfx Ascdtnhobtsr Max. cutting speed: 10 m/min Max. return speed: 25 m/min Number of die positions: 3 Throat depth: 470 mm Distance between die positions: 125 mm Table: 400 x 400 mm Special equipment: Chip removal via a permanent magnet chip conveyor 1 hydraulic unit, 1 work platform, electrically controlled hydraulic ram and end-piece holder, automatic feeding device

Condition: used, Year of construction: 1958, honing diameter 40-420 mm stroke 15-6500 mm centre height 520 mm workpiece length 6500 mm workpiece dia. 1000 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Lodpfxjyqvgys Abterr apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1961, honing diameter 160 mm stroke 3025 mm centre height 325 mm Lsdpfxsyt R Hms Abtorr workpiece length 3000 mm workpiece dia. 600 mm spindle drive 32-250 U/min stroke speed 0-20 m/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2004, operating hours: 2,184 h, functionality: fully functional, machine/vehicle number: 2407-463, spindle speed (max.): 60,000 rpm, number of spindles: 3, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 15 °, TECHNICAL DETAILS Ljdpfoxtdfbex Abtjrr Grinding spindle speeds Spindle 1: 60,000 rpm Spindle 2: 60,000 rpm Spindle 3: 45,000 rpm B-axis swivel range: -90°/+15° MACHINE DETAILS Spindle hours Spindle 1: 11,278 h Spindle 2: 2,184 h Spindle 3: 2,841 h Main counter: 45,144 h EQUIPMENT Touch probe (on 4th spindle position)

Condition: used, Flowveyor International Ltd aeromechanical conveyor Cable conveyor Suitable for conveying powders Tube diameter: 76.1 mm Conveyor made of stainless steel Cable is made of food-grade plastic-coated cable Motor power: 1.5 kW Lifting height: 2350 mm (adjustable) Lrodoyf Aztspfx Abtsr See our other listings VMA Wekerom