Used International 806 for sale (8,937)

Condition: good (used), For sale: Conveyor Drying Tunnel for Screen Printing: Manufacturer: M&R (The M&R Companies) Model: Sprint International Power supply: 400–415 V, 3-phase Frequency: 50/60 Hz Gas-powered conveyor dryer (Natural Gas / LP) Burner capacity: up to 300,000 BTU/h EU-manufactured Machine number: 0036 Drying chamber length: 360 cm Belt width: 150 cm This is a typical gas conveyor dryer for screen printing, suitable for medium and large-scale production. Currently, the tunnel is disassembled for transport purposes. Rsdpsy Au Ubefx Amnow All components are complete.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 60305, General / technical data: Manufacturer: Rausch Type: RS6 / 1000 Year of manufacture: 07/2000 Machine-No.: 60305 weight: approx. 750kg Tractive force: 60kN (80kN) clearing speed: 4m/min return speed: 8m/min max. stroke: 1000mm maximum tool length: 1200mm maximum workpiece diameter: Ø approx. 900mm table opening: Ø 90mm for standard broaching mandrels Rjdpfjiqkb Rjx Amnow Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h=table height to floor without superstructure). type of power: 400 Volt / 50Hz - 6 / 7,5kW Accessories/ optional equipment: - electrical scanning of the clamping jaws (tool removal control to prevent against unintentional retraction of the drawbridge) - integrated coolant system with check valve and drain cock - patented coolant/lubricant swivel system (retrofitted) Remark: The machine has the manufacturer CE marking. The machine is under power in our warehouse and can be inspected.

Condition: used, Grinding diameter 5-200 mm Max.grinding depth 250 mm Center height 180 mm Max.workpiece length 500 mm Redpeza Hk Usfx Amnjw Spindle bore diam. 50 mm Workpiece spindle speed 125-1000 rpm Workpiece spindle tilt 90° Table travel 3/600 mm Table speed 0-10 m/min Spindle speed 3600-40000 rpm Power 8-10 CV Dimensions 3200x1630 mm Weight 2700 Kg

Condition: good (used), Internal micrometer, internal measuring instrument, internal dial gauge, internal micrometer screws, micrometer screw, internal diameter, internal micrometer, cylinder gauge -Measuring range: 35-50 mm -Measuring range: 50-70 mm -Measuring range: 70-100 mm -Measuring range: 100-145 mm Rodpfxeb A Sx Sj Amnjw -One rotation of the drum corresponds to: 0.5 mm -with locking device -Including case -Weight 0.8 kg

Condition: used, Internal micrometer, internal measuring instrument, internal dial gauge, internal micrometer screws, micrometer screw, internal diameter, internal micrometer, cylinder gauge -Handover: in its current condition as inspected -Condition: incomplete, see pictures -Measuring range: -150 mm -Dimensions: 280/450/H60 mm Redpfx Asl Ha R Hjmnjw -Weight 2 kg

Condition: excellent (used), Internal micrometer, internal measuring instrument, internal dial gauge, internal micrometer screws, micrometer screw, internal diameter, internal micrometer, cylinder gauge -Measuring range: 160-295 mm -Dimensions: 200/485/H135 mm -Weight 4 kg Redsy Rtluspfx Amnsw

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 24 mm, Model RE16 to M16, model RE24 to M24 - ball bearing mounted wear-free parallel arm with radii of 1270 or 1800mm - Connection 230V / 1Ph - Infinitely variable speed adjustment - Digital speed display - digital depth control with memory for 5 programs - quick-change holder according to DIN standard Options: Micro spray system for model 1800 Cast iron table Wheels for cast iron table Multifunctional head for cutting at any angle Rsdpsrb Akmjfx Amnjw

Condition: good (used), Year of construction: 1980, Info: The machine was installed in a pit! - Pulling force: max. 25,000 kg - Stroke height: max. 630 mm - Working speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total power requirement: 45 kW Rodpfx Amsy H Ia Ssnew - Machine weight: 5,500 kg Transport and loading can be organised across Europe upon request and for an additional charge. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team is happy to assist you. Machinery Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS & MORE. Are you looking for a high-quality yet affordable machine for your production? Or would you like to sell yours? For further information or contact options, you can reach us via the contact form.

Condition: good (used), Year of construction: 2004, - Traction force: max. 160 kN - Broaching stroke: max. 1000 mm - Workpiece feeder stroke: max. 630 mm - Table width: 630 mm Redpfx Amey H Iaxonow - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW - Machine weight: 12,410 kg Transport and loading can be organized throughout Europe at an additional cost, upon request. Prices plus VAT Inspection is possible by appointment. Please contact us, our team looks forward to assisting you. Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality, yet affordable machine for your production? Or do you wish to sell yours? For further information or contact options, reach us via the contact form.

Condition: excellent (used), Vertex pneumatic tapping machine on articulating arm. Mounted to table 1800 x 900mm area. Redpoy Tl Rbefx Amnow

Condition: used, Technical details: Rodpfjwx Shkjx Amnjw honing diameter: 4-31 mm stroke: 350 mm throat: 250 mm

Year of construction: 2009, condition: ready for operation (used), Offered is a precision internal grinding machine. Grinding range: max. Ø 357mm x 315mm, control system: CNC control system. Equipped with full enclosure, workpiece spindle head, grinding spindle carrier, separate control cabinet, extraction pipe routing. Weight: approx. 5200kg, overall dimensions X/Y/Z: approx. 3500mm/2000mm/2200mm. Inspection possible by arrangement. Rsdpfsy Ulm Eex Amnow

Condition: used, Year of construction: 2002, honing diameter 200 mm stroke 600 mm 2 Honing spindles -both with two step expansions mechanic/hydraulic -Rotary table with 4 stations. 2 x 180° or 4 x 90° Redpfjy Umatjx Amnew -air gage measuring made for honing liners with max diameter 120mm Machine is like new because it worked only few months.

Condition: good (used), Year of construction: 2014, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm Rjdpfow Intaex Amnew --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm --> new in 1988

Condition: used, Thread cutting chuck BILZ Type DSPL 127 MK2 Thread size: M3 - M12 Mounting shank: MK 2 Length compensation: 30 mm Clamping range: Ø 2.5 - Ø 10 mm (tap shank diameter) - Chuck clamping for the tap shank and torque transmission on the square - Adjustable safety clutch for torque limitation - Length compensation +10 mm / -20 mm for precise pitch threading Maximum chuck diameter: Ø 58 mm Chuck length: 120 mm Total length with shank: 215 mm Net weight: 1.7 kg Very good condition Rjdpfxoy E T Dao Amnow

Condition: used, Year of construction: 1982, pulling force - max. 3 t max. ram stroke 1000 mm max. workpiece diameter 200 mm table-size 500 x 220 mm working area 500 x 220 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 50 mm total power requirement 6 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Rsdpfx Amsyif Nxsnew Machine comes with accessories, such as holders and broches.

Condition: used, Year of construction: 1972, pulling force - max. 6 t max. ram stroke 1000 mm max. workpiece diameter 350 mm table-size 610 x 470 mm working area 520 x 320 mm work speed 3 + 5 m/min return speed 10 m/min tool length - max. 1200 mm table hole 90 mm Rjdpfx Ameyif Nljnow total power requirement 8,2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1 x 1 x 1,8 m Machine comes with accessories, such as holders and broches.

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, Dear Ladies & Gentlemen, Rodpfoy Sv A Sex Amnew We are offering a XEROX PrimeLink B9125 with A4 High Capacity Feeder with 2 Trays, Interface Decurling Module & High Capacity Stacker with 1 Cart for sale. Counter: ONLY 2.819.178 prints total This machine was fully and professionally checked in the seller's workshop and is in excellent condition with perfect print image quality. Please contact us with questions! We will be happy to help you!

Year of construction: 2002, condition: refurbished (used), On behalf of a client and for their account, I am offering a VOUMARD 150 CNC L 1300. The machine is equipped with: 4-position turret, 3 internal tool stations, 1 empty station for external tools pneumatically swiveling tool rest Maximum diameter 350 mm Maximum length 1,300 mm Redjgigv Dopfx Amnsw CNC Fanuc 32i extensive range of accessories, including several hydraulic steady rests, power chucks, etc. See "Documents" for details. The machine can be inspected in the owner's workshop while it is running. The machine was completely overhauled in 2016. In addition, I am offering 2 Voumard VMX 90 A grinding spindles, one new and one completely overhauled. These can also be purchased separately.

Condition: used, Year of construction: 1983, Technical details: Rodpfxer R Elhj Amnew internal diameter: 140 mm total power requirement: 5,5 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: 2,8 x 2,5 m max. workpiece weight: 15 kg clamping dia. max.: 140 mm clamping length: 250 mm max. bore diameter to be ground: 0,8-90 mm min./max. hole to grind: 160 mm centre height: 90 mm workpiece spindle stepless: 112-1000 U/min

Condition: reconditioned (used), Year of construction: 2019, functionality: fully functional, Dear Ladies & Gentlemen, We are offering a XEROX C70 with internal FIERY EX-i C60/70, Interface Decurling Modue & Light Production Finisher with Booklet Module for sale. Redpfx Ajy Rvdmjmnew Counter: 1.980.846 prints total This machine was fully and professionally checked in the seller's workshop and is in very good condition with very good print image quality. Please contact us with questions! We will be happy to help you!

Condition: refurbished (used), functionality: fully functional, equipped with a FANUC 16-T CNC control system. Technical data and accessories are provided in a separate PDF. Rjdpfxjy Txk Ue Amnsw The machine has been completely mechanically overhauled.

Condition: excellent (used), A well-maintained internal cylindrical grinding machine, manufactured by JUNG, type 221, with a surface grinding attachment. The largest bore that can be ground economically is 150 mm. Grinding length without surface grinding: 250 mm. Grinding length with surface grinding, depending on the chuck length: ≤ 250 mm. Largest swing diameter inside the guard: 350 mm. Height of the spindle center above the table: 245 mm. Workpiece spindle bore: 44 mm. Workpiece spindle hollow taper: metric 50. Workpiece spindle speeds: 58 - 85 - 120 - 170 - 246 - 348 rpm. Table speed in rapid traverse (infinitely adjustable): 10 m/min. Table speed during grinding (infinitely adjustable): 0 - 8 m/min. Power requirement: 11 kW. Power requirement for the machine with surface grinding attachment: 12.5 kW. Rsdpfsy Svz Uex Amnew Net weight: approx. 3500 kg.

Condition: used, Year of construction: 2009, grinding diameter - internal max. 600 mm grinding diameter - cylindrical max. 800 mm control Siemens Sinumerik 840 D internal grinding depth max. 800 mm External grinding length max. 600 mm turning speed range - stepless 1-795 U/min workpiece length max. 800 mm Workpiece spindle unit (U/B1/L adjustment): - Travel (U axis): 300 mm - Swivel angle (B1 axis): -0.5°/+12° - Drive power of the workpiece spindle: 8.5 kW - Speed range (infinitely variable): 1-795 rpm - Setup speed (tapping): 10 rpm Rjdpfx Amjwp S Tnonsw - Spindle head size A 8 according to DIN 55026 - Through bore 58.5 mm - Workpiece diameter max. 830 mm - Workpiece length (clamped in flight) max. 800 mm - Workpiece length (clamped between centers) max. 800 mm - Load capacity at spindle head max. 6100 N Internal grinding device (Z1/X1/B2): - Travel (Z1 axis): 1100 mm - Travel (X1 axis): 150 mm - Swivel angle (B2 axis): 270° - Manual longitudinal adjustment of internal grinding axis on table: 780 mm - Drive power of internal grinding spindles (infinitely variable) Belt-driven grinding spindles: 7.5 kW - Mounting bore grinding block (diameter): 100 mm / 125 mm - Mounting length grinding block: 220 mm - Grinding diameter: max. 600 mm - Grinding depth: max. 800 mm External and surface grinding device (Z2/X2): - Travel (Z2 axis): 800 mm - Travel (X2 axis): 470 mm - Swivel angle (B2 axis): 270° - Drive power of external grinding spindles: 7.5 kW - Mounting bore of grinding block: Ø 140 mm - Grinding diameter: max. 800 mm - Grinding length max. 600 mm - Grinding wheel dimensions: max. Ø 450 x 50 x Ø 127 mm Equipment/accessories: - Various grinding spindles - Various flanges/grinding wheel holders - Various clamping jaws - Coolant system - Oil mist filter - Cooler - Technical documentation

Condition: used, Year of construction: 2012, functionality: fully functional, Tool holder: MK 2 Drilling capacity in steel: 23 mm Table: 380 x 390 mm Speeds: 150 - 1350 rpm Throat: 220 mm with Redpfx Aey Rmwksmnsw lead screws and nuts