Used Wagner for sale (94)

Year of construction: 2002, condition: ready for operation (used), General Data Measurements height 2200 mm Main Drive Iiodpex D Dpnofx Ac Aek Spindle Speed 1200 RPM Spindle motor power 9 kW Control Unit Brand SIEMENS Dimensions Machine Length 4660 mm This WAGNER FCL 3280 was manufactured in 2002. It features a spindle bore of 134 mm and a spindle speed range up to 1200 rpm. The machine supports a maximum workpiece weight of 1800 kg with tailstock and steady rest. It offers rapid traverse rates of 10,000 mm/min for both Z and X axes. If you are looking to get high-quality turning capabilities, consider the WAGNER FCL 3280 machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC machining center Wagner WMC 1800 (2013) Manufacturer: Wagner Model: WMC 1800 Ijdpfew S Hrvox Ac Asik Year of manufacture: 2013 Siemens 828 control Condition: good, used, currently in production X-travel: 1800 mm Y-travel: 900 mm Z-travel: 700 mm Tool holder: SK40 Through-spindle coolant (IKZ) 25 bar with belt filter system Tool measuring system Handwheel Without tools

Condition: used, Weinig / Wagner one-handed hydraulic grease gun with manometer for hydraulic clamps. Iiedpfxjxu H Tdo Ac Aok Manufacturer Part No.: 00309102

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Iedotq I Rqopfx Ac Aoik Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m².

Year of construction: 1980, condition: good (used), Movable clamping table make WAGNER type: FE4000 year 1980 Travel : 4 000 mm table surface : 4000 mm X 1400 mm Feed rate : 8 - 2500 mm/min Rapid traverse : 4 m/min load capacity. Max : 12 500 kg Iisdpfxjg Uf I Aj Ac Aek Weight : approx. 12 000 kg In good condition. Hydr.clamping and worm drive

Condition: good (used), Year of construction: 2009, WAGNER/TRENNJÄGER PMC 12 S Longitudinal Circular Saw Year of manufacture: 2009 Machine number: 200 Equipment: - Round material up to 360 mm - Square material 300 mm x 300 mm - Flat material 1,000 mm x 150 mm - For further data, see brochure - Additional: 2nd saw blade, diameter 910 mm Scope of delivery includes: - Operating manual/documentation For details on features, operation, transport, machine overview, and manufacturer’s brochure – please see PDF. Image, content, and specifications are provided without guarantee, therefore not binding. All other accessories shown in the photos and video are not included in the scope of delivery and thus are not part of this sale. The scope of delivery only includes the accessories expressly listed here, in the order confirmation, and on the invoice. FCA (Free Carrier, loaded on truck) D-04643 Geithain Packaging only Delivery time: immediate Iedox H R Hbopfx Ac Ajik Subject to prior sale / Payment due immediately upon conclusion of sale.

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 1700 mm Iijdpfx Acex D Nu Ns Ajk Measurements height 2240 mm Machine weight 3500 kg Measurements depth 2100 mm Control Unit Brand SIEMENS Model SINUMERIK 828D Main Drive Spindle speed range 80 – 10000 rpm Tool taper SK 40 Movement X-Axis Movement 600 mm X-Axis Feed Force 10000 mm/min X-Axis Rapid Traverse 24000 mm/min Y-Axis Movement 400 mm Y-Axis Feed Force 10000 mm/min Y-Axis Rapid Traverse 24000 mm/min Z-Axis Movement 450 mm Z-Axis Feed Force 10000 mm/min Z-Axis Rapid Traverse 20000 mm/min Additional Equipment Rigid cast-iron frame construction Linear guides on all three axes Automatic double-arm tool changer (16 stations) Complete coolant system Central automatic lubrication Air blast system for spindle cleaning Machine enclosure with doors Machine and signal lights Documentation in English CE-certified This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: F-00334, controller manufacturer: Siemens, controller model: SINUMERIK 802C, MACHINE DETAILS Control brand: SIEMENS Control model: SINUMERIK 802C Ijdpfx Acox D T A Do Aeik

Condition: used, Year of construction: 1986, total height: 1,900 mm, total length: 2,300 mm, total width: 2,200 mm, Empty weight: 2.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 86721 - Drive system: Conventional - Power [kW]: 1.5 - X-axis travel [mm]: 700 - Y-axis travel [mm]: 400 - Z-axis travel [mm]: 400 - Table width [mm]: 900 - Table depth [mm]: 350 - Magnet width [mm]: 350 - Magnet depth [mm]: 700 - Max. grinding wheel diameter [mm]: 250 - Control: Conventional - Motor power: 1.5kW - Transport dimensions: 2300mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iodpfxjw E If Ej Ac Aoik Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, turning diameter over cross slide: 610 mm, turning length: 2,000 mm, spindle bore: 100 mm, travel distance X-axis: 310 mm, Equipment: documentation/manual, In good condition. Equipped with steadies. Spindle bore 100 mm. Machining diameter up to 610 mm, length up to 2000 mm. Iedpfx Aex Dhkvoc Aeik Siemens control. Features TurnPlus. Max. turning diameter: 546 mm Max. turning diameter over bed: 610 mm Distance between centers: 2000 mm CNC type: X-axis: 310 mm Z-axis: 2000 mm Spindle taper: Spindle bore: 106 mm Spindle speed: 1800 rpm Spindle motor power: 15 kW Tailstock: yes Bar feeder: no ----- Length x width x height: 4500.0 × 1620.0 × 1950.0 mm Weight: 4540 kg Technical condition: as is

Condition: good (used), Year of construction: 2016, machine/vehicle number: 24-16-0009, Offer 25391 Technical Data: - Automatic cutting cycle, hydraulic lifting/lowering of the saw frame - Manual miter adjustment with manual clamping Iisdpfox Eku Njx Ac Aok - Saw blade dimensions: 6040 x 41 x 1.3 mm - Cutting speed, steplessly adjustable: 20 – 90 m/min - Cutting pressure regulation, stepless: 10 – 15 bar - Lowering speed: 0 – 300 mm/min - Cutting range: 30° – 90° - at 90° round: 500 mm - rectangular/flat: 620 x 450 mm - at 45° round: 450 mm - square: 430 x 430 mm - at 30° square: 310 x 310 mm - Hydraulic material clamping - Coolant system - Discharge roller conveyor with length stop, 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 4 kW - Required space approx. W 1700 x H 1700 x D 3000 mm - Weight approx. 1600 kg

Condition: new, Year of construction: 2025, Pneumatic double diaphragm pump Cobra 40 -10 Its unique design allows low pulsation operation Uniform ink flow for perfect spray and highest surface quality Ideal for processing shear and moisture sensitive materials Minimal shear forces - ideal for processing e.g. UV varnishes Ideal for processing small quantities of material and for frequent colour changes Scope of delivery: Basic unit on stand, HD double hose 7,5m, upper container 5l Ex, AirCoat gun AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40 Technical data: Iijdpfx Acjbuqn Ho Aek Conversion ratio: 40:1 Volume flow per double stroke: 10 cm3 Flow rate at 200 double strokes: 2 l/min max. Operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg At a special price - immediately available

Year of construction: 2011, condition: ready for operation (used), overall weight: 7,300 kg, total height: 3,245 mm, spindle motor power: 5,500 W, product length (max.): 3,080 mm, General Data Iiedex D Ilajpfx Ac Aek Machine weight 7300 kg Measurements height 3245 mm Dimensions Machine Length 3080 mm Main Drive Spindle motor power 5.5 kW This WAGNER PRC 60 was manufactured in 2011. It features a drilling capacity in steel of 60 mm, a table size of 630 × 800 mm, and a spindle taper of MK 5. The machine includes a spindle travel of 400 mm and a reach of 400 – 2000 mm. With a column diameter of 450 mm and a vertical arm adjustment of 800 mm, it's robust and versatile. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Iedpfxov Ed Uke Ac Asik Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: used, Year of construction: 2008, total height: 2,750 mm, total length: 2,900 mm, total width: 2,400 mm, Empty weight: 8.500 kg Price: On request - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MB116360 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Number of axes [pcs]: 3 - X-axis travel [mm]: 1100 - Y-axis travel [mm]: 650 - Z-axis travel [mm]: 600 - Table length [mm]: 1300 - Table width [mm]: 650 - Tool holder: SK40 - Max. spindle speed [rpm]: 8000 - Options: Chip collection tray, Chip conveyor, External cooling, Tool magazine, Machine-vice - └ Tool magazine [pcs.]: 24 - Transport dimensions: 2900mm x 2400mm x 2750mm (l x w x h) - Transport weight [kg]: 8500kg Ijdpsxta Niefx Ac Asik - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1980, functionality: limited functionality, WAGNER MECHANICAL ECCENTRIC PRESS — 500 TON — DOUBLE COLUMN Brand: Wagner Model: 500 ton Eccentric Press Year: 1980 Mechanical overhaul: 2010 Electrical panel: overhauled in 2011 Condition: partially operational Type: double column – eccentric system Strokes/min: 0–30 Slide stroke: 300 mm Slide adjustment: 140 mm Clearance at TDC: 1100 mm Front column opening: 1850 mm Side window: 800 mm Bolster: 1800 × 1000 mm Ram: 1800 × 1000 mm Number of pressure points: 2 Ram guides: 8 Guards: front and rear Machine dimensions: 3000 × 2000 × 6000 mm Weight: 50 tons Isdpfx Aox A Akzsc Asik Foundation required: 100 cm Accessories: ELMEA L500 power supply feeder Status: available for inspection

Condition: good (used), Year of construction: 2017, machine/vehicle number: N 16601, Offer 25387 Technical Data: - Drilling capacity in steel: 60 mm - Drill spindle taper: MT 5 - Drill spindle stroke: 300 mm - Digital positioning display for stroke and position - Radius (throat): 1600 mm - Column diameter: 350 mm - Max. distance spindle – base plate: 350 – 1650 mm - Vertical travel of the arm: 1250 mm - Spindle speeds, stepless: 30 – 1500 rpm - Feeds, stepless: 1 – 600 mm/rev - Drive: 400 V / 8.9 kVA - 2 x cube tables Iodox Ei D Aspfx Ac Asik - Coolant system - Required floor space approx.: W 2490 x H 2980 x D 1060 mm - Weight approx.: 3800 kg

Condition: excellent (used), Year of construction: 2020, Pneumatic Double Diaphragm Pump Cobra 40-10 Top condition – Year of manufacture: 2020 Its unique design enables low-pulsation operation. Consistent paint flow for a perfect spray pattern and highest surface quality. Ideally suited for processing shear-sensitive and moisture-sensitive materials. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for handling small material volumes and frequent color changes. Scope of delivery: Basic unit on frame, HD double hose 7.5 m, upper container 5 l Ex, AirCoat spray gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40. Technical Data: Ratio: 40:1 Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Iiodpfx Asxdtkusc Ask Extremely low hours of use –

Year of construction: 2021, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 3400 mm Measurements height 2100 mm Machine weight 5000 kg Control Unit Brand SIEMENS Model SINUMERIK 8287D Main Drive Spindle speed range 20 – 2200 Spindle motor power 15 kW Spindle bore 81 mm Number of axis 2 Movement X-Axis Movement 280 mm Z-Axis Movement 1435 mm Workpiece Workpiece drm over bed 500 mm Workpiece drm over support 260 mm Tail Stock Pinol diameter 75 mm Pinol tool taper MK 5 This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us. Iisdex D Nuvopfx Ac Aek Application Types Turning

Condition: excellent (used), functionality: fully functional, Complete equipment for an industrial paint shop: - dry wall with extraction system and filters. The paint shop was used for painting window frames. Iijdpfoxmr Tyjx Ac Aek

Condition: used, BAG PACKING MACHINE Consists of: Weighing machine: make Wagner type WAMA-SP Compact, year 1995 Conveyor belt Bag emptying machine: DCE Sintamatic Isdpfx Aceu Nu Hvs Ajik Bag sealing machine: Toss type 780 year 2002 *

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand SIEMENS Model Sinumerik Movement X-Axis Movement 1400 mm Iiodpfex D Elwox Ac Aek Z-Axis Movement 600 mm Y-Axis Movement 700 mm This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1995, Technical details: x-travel: 500 mm Iisdpfxsu Ndfus Ac Aok y-travel: 200 mm z-travel: 300 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 45 ° range of revolution per miute: 45...2000 U/min headstock: dist. table - spindle center: max. 300 mm distance spindle nose and table: max. 300 mm feed:: 16...800 / 18 step mm/min table surface area: 1000 x 165 mm table swivelling to both sides: ja Grad control voltage: 380 V total power requirement: 4,6 kW machine weight approx.: 1540 kg dimension machine xH: 1,5 x 1,5 x 1,6 m The milling beam is slide adjustable with 580mm. Throat min. / max. 250/800mm *

Year of construction: 2007, condition: ready for operation (used), General Data Measurements width 1470 mm Measurements depth 3230 mm Measurements height 1730 mm Machine weight 3000 kg Control Unit Brand SIEMENS Model SINUMERIK 802Ç Main Drive Spindle motor power 7.5 kW Number of axis 2 Iodpfxsx D Rfij Ac Aoik Movement X-Axis Movement 295 Z-Axis Movement 1435 This WAGNER WDE 500 was manufactured in 2007. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Consider the opportunity to buy this WAGNER WDE 500 horizontal turning machine. Contact us for more information. Application Types Turning

Year of construction: 2012, condition: ready for operation (used), Control Unit Brand SIEMENS Model 802-C Main Drive Number of axis 2 Additional Equipment Complete electrical equipment 400 V / 50 Hz RS 232 interface Electronic handwheels with increment preselection Mechanical spindle engagement lever Right and left rotation Pilot lever for feed with detent function Rapid traverse override as a push button Movable control panel Constant cutting speed Bed guideways induction-hardened, ground, and Turcite-coated This WAGNER WDE 500 was manufactured in 2012. A robust horizontal turning machine featuring a Siemens 802-C control interface, it includes a three-jaw lathe chuck, quick-change tool post, and manual tailstock. The machine is equipped with a complete coolant system and an enclosure with safety features. If you are looking to get high-quality turning capabilities consider the WAGNER WDE 500 machine we have for sale. Contact us for more information. Application Types Turning Isdpfx Acjx D Snxo Ajik