Bench drilling machine

IXION BT 30 ST

Condition: good (used), functionality: fully functional, gearing type: automatic, fuel type: diesel, overall weight: 5,500 kg, maximum load weight: 2,500 kg, lifting height: 6,000 mm, mast type: telescopic, Year of construction: 2018, operating hours: 3,150 h, Equipment: all wheel drive, cabin, gripper hydraulics, pallet forks, standard shovel, JCB 525-60 T4 telehandler - good condition Technical Data: Control: joystick Four swivel wheels 4WS Type of engine Kohler k.A. 2,5 l Engine power: 75 hp Maximum reach: 2.64 m Lifting height: 6 m Dead weight: 5.49 t Driving speed with/without load: 25km/h Transport width: 1.84m Transport height: 1.89m Maximum load capacity: 2500 kg Mileage: 3142 mth. No leaks at the engine and other components Itsdpfx Abouvc Iyjced Quick installation of forks and bucket Attachments: Pallet forks, Loader bucket Rear automatic hitch.

Condition: good (used), Year of construction: 1986, Offer 23389 Technical data: - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev - Drill spindle speeds in gear stages 95 - 2000 rpm - Drill spindle stroke 160 mm - throat depth 350 mm Itsdpfxjrckv Hj Abcod - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - max. distance table - drill spindle 500 mm - max . Distance machined base plate - drill spindle 1050 mm - Column diameter 160 mm - Coolant device - Lighting system - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Year of construction: 2001, condition: refurbished (used), low price laser cutting machine NTX48 1,5kW refurbished, MAZAK lasercutting machine with 1500W table size: 2500mm x 1250mm machine dimension 2,6m x 6m parts conveyor Isdpfx Ajhturcebcstd full covered machine table FE: 12mm VA: 6mm plastics possible to cut incl. software incl. exhauster to test under power ! option: warranty, setup, training

Condition: new, Year of construction: 2026, functionality: fully functional, A sandblaster connected to a compressor is an ideal solution for quick, accurate and effective cleaning of various surfaces, eg removing rust, paint, sludge from metal surfaces, such as: automotive parts, engines, fittings, casings, wheels, rims, hinges, etc. As abrasive can be used, among others: sand made of plastic, corundum, quartz, glass, etc. The sandblaster we propose is very well equipped and prepared for work. Machine description The machine is equipped with a proven control system, a solid and roomy chamber with side doors, a solid sandblasting gun, four ceramic nozzles, high-quality work gloves, workspace lighting, a large window - a viewfinder (without a blind spot). The recommended device is provided in addition to a compact construction and a large and spacious workspace, ease of use, reliability and work safety. Dust-free operation of the device is ensured by the use of perimeter gaskets, which allows you to perform work in an environmentally friendly way. The blasting hose was placed in the bottom of the collecting container. The drain hole allows a quick change of material for sandblasting. The advantages of our sandblaster model Complete for use Comfortable sandblasting gun with 4 interchangeable ceramic nozzles Large, stable side door with rubber perimeter gasket for safe and dust-free operation High-quality rubber gloves integrated with the device Venting connection Efficient lighting of the working space 4 pieces of removable protective film for the window, viewfinder Sanding hose located in the bottom of the collecting container Adapted to work with various abrasives The drain hole allows a quick change of material for sandblasting Ease of use, reliability and work safety Technical data Workspace dimension 840x550x370-550 mm Air consumption 400-700 L/min Required air pressure 2,75 - 5,5 BAR Iedpfxjrh Erxo Abcotd Arm hole opening 180 Air connection 1/4" Weight 49 kg We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: ready for operation (used), machine/vehicle number: 331/43, drilling capacity: 3 mm Itsdpfofnbgqex Abced throat: 100 mm spindle turning speed range: 6300/9000 rpm engine: 380 V, 0,18 kW space needed: 470 x 250 x 520 mm weight: 39 kg

Condition: used, Year of construction: 2000, Used machine Year of manufacture: 2000 Equipment and technical specifications: - Grinding unit can be swiveled via hand crank - The machine base is made of welded steel, ensuring high torsional rigidity and vibration-free operation - Oscillating sanding belt with a separate geared motor for improved sanding results - Oscillation can be optionally switched on - Graphite-coated sanding shoe for longer sanding belt service life Iodpfxswkbcbj Abcjtd - Height-adjustable sanding table allows use of the full sanding belt width - Additional table for sanding radii with integrated extraction ports - Spring-loaded belt tensioning system automatically compensates for differences in belt length - Equipped with adjustable stops, making it ideal for veneer sanding - Veneer overhang can be easily sanded down - With mobile undercarriage - Oscillation motor power: 0.11 kW - Mains voltage: 400 V - Frequency: 50 Hz - Sanding belt length: 2,640 mm - Sanding belt width: 150 mm - Belt speed: 14 m/s - Oscillation stroke: 15 mm - Sanding surface length: 800 mm - Sanding surface width: 150 mm - Grinding unit swivel range: 0–45° - Worktable length: 950 mm - Worktable width: 450 mm - Worktable height adjustment: 110 mm - Dimensions: 1,700 × 1,000 × 1,150 mm - Weight: 300 kg Availability: short-term Location: Flörsheim

Condition: good (used), Year of construction: 1999, Offered is a used CNC milling machine CHIRON FZ 22 S high speed with Siemens SINUMERIK 840D control. The machine is already dismantled and ready for loading. Manufacturer: CHIRON - Works 78532 Tuttlingen Type: FZ 22 S high speed Machine no.: 497-55 Chip conveyor: Knoll 340 K-1/500 Spindle hours: 2355 h year of construction: 1999 Weight: 6500 kg Inspection report measurement from 2021 available x-way: 750 mm y-way: 520 mm z-travel: 630 mm spindle holder: SK 40 CNC control: Siemens SINUMERIK 840D table size: 1150 x 570 mm max. table load: 1200 kg tool changing device: 20 pos. Itedpjkr E Nnefx Abced Coolant device operating voltage: 400 V total power requirement: 32 kVA space requirement W x L x H: approx. 2.00 x 3.80 x 3.0 m The price is net, plus VAT, ex works free loading.

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Ijdeda Nqxjpfx Abcstd Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle in stock, available now

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal faceplate position: 10 t Load capacity with vertical faceplate position and centre of gravity distance 300 mm: 10 t Load capacity with vertical faceplate position and centre of gravity distance 830 mm: 5.5 t Face plate dimensions: 1500 x 1500 mm face plate speed hydraulically infinitely variable: 0,025 - 0,75 rpm Pivoting range: 0 - 135 Swivel time for full swivel range to: 140 s Swivel time for full swivel range down: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm Itjdpfxecblc So Abcsd space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3,5 t Weight of the counterweight: 2,3 t

Condition: new, round material 30 x 1 mm square material 30 x 30 x 1 mm 16 mm 30 x 10 mm speeds 9 U/min Iodpfoh D Svnsx Abcjtd total power requirement 1,1 kW weight of the machine ca. 0,32 t dimensions of the machine ca. 0,82 x 0,60 x 1,26 m Electric roller profile with - 5 set of rollers 2x 20mm and 30mm for round material, 1x for flat material 1x for square material 1x for? - footswitch