Used Juice Extractor for sale (1,110)

Condition: used, Filter housing, dust extractor, extraction installation, filter unit, dust filter Dimensions: 680mm x 680mm x 2800mm Dodpfxowyf T Ao Afpeun Outlet diameter: 200mm Capacity: 1500 m3/h New top filter 3 round filter cartridges need replacement Complete with control cabinet and pneumatically cleaned filter cartridges

Condition: used, CO2 Supercritical Fluid Extraction Volume: 200 ml Operating Pressure: 300 bar Volume (cc): 200 Operating Pressure (bar): 300 Temperature (°C): 20 to 80 Djdpfx Ajwpvvtofpeun Solvent Flow Rate: 3 kg/h Dimensions (mm): 1850 x 830 x 1850

Condition: like new (used), functionality: fully functional, The FBR ELPO P10 Single Turbo Single Passer is an industrial machine designed for efficient fruit and vegetable processing through a single-pass system, optimizing the flow and the quality of the final product. Ideal for the processes of the food industry. Main technical characteristics: Machine type: Single turbo passator, equipped with a rotor and a stator that facilitate the passage control of the processed material. Labor capacity: Planned to manage medium-high portability, second to specific configuration and product viscosity. - The cover may vary depending on the product. Duodpfx Afjwpimlopon

Condition: used, functionality: fully functional, Current sieve that incorporates the pin, 2.3mm. Dsdpfownyymex Afpjun

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, REF: MM5728 1 x Zumex Food Engineering commercial cold press juicer.  The Mastery represents Zumex’s cold press commercial system for all types of fruit and vegetable juices, leading the way with its crushing efficiency and power, thanks to its shredder discs and its Brushless motor. It also has a 11-ton press, which is more compact than any other press of its category to obtain quality juice. Technical specification ⚙️ ✅ Manufacturer - Zumex Food Engineering ✅ Model - MASTERY.  ✅ Serial number - 475186. ✅ Date of manufacture - 2021. ✅ Production capacity - from 30 L/h up to 110 L/H. ✅ Motor - Brushless. ✅ Deposit capacity - 3 litres. Dodpfx Aet Uim Hjfpoun ✅ Dimensions - 940mm L x 735mm W x 1700mm H. ✅ Touch Control Display - 4.3" Colour. ✅ Material - INOX. ✅ Pression Power - 11,000 kg.  ✅ Electrical requirements - 220-240 V / 50 hz / 1 phase. Notes 🗒️ Suitable for soft fruit, hard fruit, vegetable greens or a mix of those three products.  Videos available on request. 

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 x Goodnature Inc. juicer. The juicer shreds vegetables, fruit and root vegetables and hydraulically presses them into juice (cold-pressed juice) without heating. Suitable for continuous use (professional kitchens, smoothie bars, etc.) without risk of overheating. Model - Mini X-1. Year – 2019. Size of the squeezing batch 1,3-1,5 litres. Electrical requirements - Operates on mains power 230V. Condition – Excellent, almost as new. The juicer was used occasionally between 2019 and 2021. Duedpowd Umtsfx Afpen

Year of construction: 2025, condition: new, Wash, mill and press fruits, pasteurizing the juice and filling in Bag in Box Capacity up to 750l/h Dsdpfxe Uv Ite Afpeun incl. mounted hydraulic bin tipper washing-mill Kreuzmayr KWEM1000 single belt press Kreuzmayr KEB500 pasteurizer Kreuzmayr PA750 oil Bag in Box filler Kreuzmayr KBF900, with mounted 6-head bottle filler Juice pump, juice sieve, 2 pieces juice tank á 220 liter stainless steel frame with two axes wheeles 195/50/10 canvas cover with gas pressure spring for both sideboard, backboard able to open 4 pieces shoring for a horizontal arrangement of the plant High pressure cleaner, air compressor and complete pipe installation fix mounted

Year of construction: 2024, condition: new, functionality: fully functional, Kreuzmayr citrus juicer KCE 1000 Newly developed industry standard citrus juicer Hourly output Approx. 2500 kg oranges (depending on the size of the fruit) Juice yield approx. 50%, i.e. approx. 1250 l/h juice Drive power 9.0 kW Weight 700 kg Total height of the machine 2600mm Feeding height of the fruit approx. 1950mm Duedpfxsq Huxis Afpsn Peel discharge screw Integrated juice finisher for fine filtration of the juice after pressing The machine can be operated with dry oranges (without washing), The juice does not come into contact with the peel, thus minimizing the amount of peel oil in the juice

Year of construction: 2025, condition: new, lxbxh 7500x2550x3000mm stainless steel frame with aluminium bottom and aluminium outside walls and roof this container is made for changing systems on trucks with hydraulic feet, to lower down the platform to the ground Djdpfecltl Ejx Afpoun - Central control panel (for belt press and washing elevator): it is fixed that it is not on the belt press. It is either in the center of the container or on the washing elevator. - Canvas cover: Additional hanging cover side doors: on the heater side in two parts - Water supply: Connection and system in 1" - Hydraulic system: Operation with 24V DC and 400V power supply; 24V DC magnetic valves

Year of construction: 1990, condition: excellent (used), Offered is a used juicer / apple press. Year of manufacture: 1990s. Duodeh U A Sbopfx Afpjn Very good condition.

Year of construction: 2016, condition: not inspected (used), Zumex Speed Pro self service Juicer Serial: 436746 Dedpfxju Tgmmo Afpeun 2016, Stainless juicer, capable of very quick performance and can juice 40fruits a minute while still producing an incredibly high yield, up to 4.5L of juice per min, mobile, 1Ph

Condition: like new (used), These machines are used in the food industry to process fruit and vegetables, separating the pulp from skins, seeds, and other waste. The machine is primarily used as a juice and purée extractor. It is also used to remove seeds and pulp from juice extracted by other machines. The extractor offers a high production capacity, which varies depending on the following factors: type of product (citrus fruits, pomegranates, tomatoes, etc.), condition of the product, and type of processing the product has already undergone. In general, the 'Finisher' extractor offers the following advantages: - Production of clearer juices (from mixtures of pulp, seeds, and skins) due to the lower solids content compared to crushing processes. - Prevention of aeration in the extracted juice. - Achieving the lowest possible moisture content in the waste. Dedpox S Hy Uofx Afpsun WORKING MEASUREMENTS: Mesh length: 60.5 cm * Output may vary depending on the product.

Condition: like new (used), functionality: fully functional, These machines are used in the food industry to process fruit and vegetables, separating the pulp from skins, seeds, and other waste. The machine is primarily used as a juice and purée extractor. It is also used to remove seeds and pulp from juice extracted by other machines. The extractor offers a high production capacity, which varies depending on the following factors: type of product (citrus fruits, pomegranates, tomatoes, etc.), condition of the product, and type of processing the product has already undergone. In general, the 'Finisher' extractor offers the following advantages: - Production of clearer juices (from mixtures of pulp, seeds, and skins) due to the lower solids content compared to crushing processes. - Prevention of aeration in the extracted juice. - Achieving the lowest possible moisture content in the waste. WORKING MEASUREMENTS: Mesh length: 60.5 cm * Output may vary depending on the product. Dsdpfx Afsx S Hxdepoun

Condition: used, functionality: fully functional, The turbo-extractor, models CX20, is designed and built solely for the extraction of juice or puree from products normally intended for food, starting with whole fruits and vegetables or in large chunks.The machine can work in the presence of low-pressure steam or inert gas. Products: - Apples and pears. - Pitted peaches and apricots. -Grapes - Red fruits and wild fruits. - Tropical fruits and bananas. - Other fruits and vegetables. The principle function is to directly feed the machine with whole or destoned fruit at room temperature and by means of the Rotopulse patented device it's possible to extract the puree without preheating it. * Production may vary depending on the product. * Product inlet: 290x320 * Product outlet: Ø 150 * Water inlet: DN 25 Djdpownyudsfx Afpjun * Water outlet: DN 50

Condition: used, Year of construction: 2016, functionality: fully functional, Tatarapack bevarage for juice Dujdpfxeyc I U Hj Afpsn

Condition: excellent (used), filter area: 50 m², suction capacity: 650 m³/h, negative pressure: 38,000 Pa, High-pressure fume extractor, dust extractor, TEKA self-cleaning filter. Filter for plasma, laser. Due to its design, the system is particularly recommended for processing greasy, sticky fumes and dust. The device is equipped with an automatic system for impregnating cartridge filters and an activated carbon filter for neutralizing odors generated during processing. The filter is cleaned pneumatically with impulses of compressed air during operation, which results in high efficiency of the device. The extraction is designed for special applications where the filtered fumes and dusts may be soggy and sticky. By feeding the impregnant, moisture is captured from the smoke, which helps protect the filters Dusdpfsrhidmox Afpsn from sticking. In this case, the life of the patron filters is extended. After the cleaning process, the control gives a pulse to the magnetic valve, located on the top cover of the powder-filled barrel. The applied magnetic pulse swirls the impregnant, which enters the suction pipeline. The powder covers the working surface and provides a protective coating for the filters. Unit like new - worked only 126 hours !!! Turbine with a power of 7.5 Kw. in a sound-absorbing housing with a silencer Capacity 650 m3/h at a vacuum of up to 38 000 Pa !!! Filtration area of 50m2 Inlet diameter : 100 mm Complete with , pneumatic gate valve , silencer and partial piping.

Condition: used, Year of construction: 2006, filter area: 31 m², suction capacity: 2,500 m³/h, Dust extractor, welding fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based, for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. The Absolent TSF4F dust filter is built on the latest and most efficient filtration technology. Air is drawn into the filter cartridges, while most residual particles adhere to the outside of the cartridges. The cleaned air passes through the fan into the HEPA filter, which ensures a guaranteed and constant collection efficiency of 99.99%, capturing particles with a diameter of 0.3 µm. The HEPA filter is equipped with a manometer that indicates when the cartridge needs to be replaced. When the pressure drop across the filter cartridges exceeds the set threshold, the valves in the cleaning air tank open and a pulse of compressed air is released into the filter cartridges from the cleaning nozzles. Dusdpfxexu Hg Do Afpon Make: Absolent Model: TSF4F Specifications: Fan power: 4 kW Capacity: 2500 m3/h Sound level (operation/cleaning): 60/85 dB(A) Filtration area: 31 m2 HEPA filter area: 24 m2 Stock no.: 1078

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Control: SIEMENS 840D Number of pallets: 2 Number of axes: 5 Number of spindles: 2 Tool holder: HSK63 Spindle drive power: 15.5 kW Spindle speed: 17500 rpm Spindle clearance (distance): 300 mm LINEAR AXES Travel X/Y/Z: 300 x 650 x 400 mm Rapid traverse rate (X/Y/Z): 75,000 mm/min ROTARY AXIS A Travel: 360 degrees Minimum resolution: 0.001 degrees ROTARY AXIS C Travel: 360 degrees Minimum resolution: 0.001 degrees Number of tools in magazine: 2 x 32 PALLET CHANGER Max. table load: 300 kg Electrical Power Supply Power supply: 400 V Total connected load: 70 kVA Weight and Dimensions Floor space requirements: 3900 x 3260 mm Machine height: 3100 mm Machine weight: 8800 kgs Dodpfx Afoycg R Hopoun Accessories / Equipment Interface: Ethernet / RS232 / PCMCIA Coolant tank: 400 l With high-pressure pump: 70 bar With paper belt filter: KNOLL PF160/800 With coolant cooling system Internal Coolant Supply (ICS) Chip discharge: Rear Oil mist extractor: LOSMA Darwin 1200 Spindle cooler The machine is in good used condition. Available under power in Hungary.

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Dedpfx Afexrpmzjpeun Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Stock number: 0981

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h Dodpfx Afohby Riopeun dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: new, galvanized sheet metal dust collection trays Djdpfx Ash Ucqtofpeun fold down side and rear walls - optional rear wall with suction function Working area 2500 x 800 mm Working height 930 mm incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow 5400 m3/h Number of filter cartridges # 4 DM filter cartridges 320 mm Length filter cartridge 600 mm Total filter area 34.8 m2 Noise level 78 dBA Compressed air 5-7 bar Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Dodpsr A Eq Rsfx Afpjun Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure Duedpfsq Ii Dlex Afpon The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, Year of construction: 2006, operating hours: 18,625 h, machine/vehicle number: LC598, Technical Specifications & Performance Data This complete Tetra Fino Aseptic line is an integrated aseptic packaging solution engineered by Tetra Pak for liquid food applications. The core filling machine was manufactured in 2006 and is complemented by downstream packaging equipment. Designed for industrial packaging and beverage production, it provides reliable second hand performance with hygienic processing and efficient material handling. Dujdpoyh E Apofx Afpjn Production speed: up to 3,600 packages/hour Container type: Carton-based aseptic packages (Tetra Fino Aseptic family) Supported volumes: 0.2L to 1.0L (examples: 0.2L, 1.0L) Primary product currently run: Milk Main filler year: 2006 Additional module: SOCO System unit, year 2014 Accessories: Trolley for packing with roll holder, ABC valve, 1 m mesh conveyor Advanced Automation & Control Systems The line incorporates an industrial control panel for central operation of filling and downstream handling. The aseptic filler integrates automatic process sequences for sterilization, filling, and sealing under controlled conditions. Operator safety interlocks and machine guarding support safe operation, while standardized HMI navigation streamlines recipe selection and format changes. The architecture is designed for fast restarts and consistent uptime in high-demand environments. Production Line Integration Capabilities This used bottling line is configured for inline operation, linking the aseptic filler with conveyors and a SOCO System packaging module. It supports integration with typical ancillary devices such as product dispensers, cap or straw applicators, and end-of-line packaging machinery. Format changeovers accommodate multiple carton volumes within the 0.2L to 1.0L range, enabling multi-product flexibility for milk and juice production. The conveyor layout ensures smooth product transfers and balanced accumulation between stations. Machine Condition & Maintenance History The equipment is reported in production with overall good condition. Continuous operation on milk indicates stable performance and consistent hygiene compliance. The 2006 filler and 2014 downstream module are maintained to sustain aseptic integrity and packaging quality, making this second hand industrial packaging line a strong candidate for rapid redeployment. Operational Performance & Versatility Optimized for liquid food, the line supports aseptic packaging of products such as milk and juices in pillow-style Tetra Fino Aseptic formats. Key benefits include extended ambient shelf life without preservatives, high barrier multi-layer materials, and hermetic sealing. The layout offers reliable filling accuracy, gentle product handling, and quality consistency suitable for beverage production requiring long shelf life and stable logistics. Installation Requirements & Site Preparation The system is designed for standard industrial facility layouts with room for filler, conveyors, and a compact end-of-line module. Typical utilities include electrical power, compressed air, and process water as required by aseptic operations. A clean, controlled environment is recommended to maintain aseptic performance, with adequate access for o...

Condition: excellent (used), Year of construction: 1992, For sale is a used Panhans thickness planer, model 426, with a planing capacity up to 230 mm. The machine is in good condition and has been serviced and inspected by our qualified staff. Technical specifications: - 4-knife Tersa cutterblock - Planing width: 630 mm - Maximum height capacity: 230 mm - 2 feed speeds - Extractor connection Ø 160 mm - Motor power: 7.5 kW - Year of manufacture: 1992 The planer is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Dujdpfx Afswza Tyjpon Related terms: planer, thickness planer, thicknessing machine, Dickte, Felder Reference: R-S24F9