Used K30 for sale (156)

Condition: excellent (used), functionality: fully functional, fuel type: gasoline, color: blue, operation weight: 3,500 kg, lifting power: 1,600 kg/m, lifting height: 30,000 mm, tire condition: 80 %, Year of construction: 2012, operating hours: 2,500 h, Crane on trailer AHK 30-1600 Registered in Poland, UDT valid until September 2026 • maximum mast extension 30m • support width in standard position 6.25 x 5.90 m • support width with outriggers on one side 8.17 x 4.00 m • total trailer weight with crane approx. 3500 kg • drive controlled via radio system • wireless control with work parameter display • mechanism monitoring wire rope slack and winch operation • possibility of remote retraction of mast to transport position Mast construction • made of high-strength steel and aluminium alloys • integrated with chassis • fitted with a modern telescopic extension system Nedpfx Ajyugt Ejh Rewd

Condition: as good as new (ex-display), vacuum drying oven Inside: 700 x 700 x 600mm deep Heating capacity: 3 KW Temperature range 1-120°C Outer dimensions: 1280 x 950 x 1280 Pressure range: Atmosphere - 0 Bar (Not suitable for overpressure) A suitable vacuum pump is provided depending on the application. Supply line: 3ph , N, PE 400V, 50Hz CEE plug The interior installation can of course be completely removed! Nwjdpfx Ajfbl T Nsh Rod

Year of construction: 2014, condition: good (used), Technical data capacitor Volume flow max.: 300m³/h Condenser mass max. in delivery condition: approx. 430mm x1610 mm high Cylindrical part: approx. Ø 273 mm Weight of the chamber in delivery condition: approx. 80 Kg Content upper part (condenser): approx. 30L Content lower part (receiver): approx. 28 L Material elastomers: NBR/FKM/PTFE Njdpfx Ahocpwhbj Rjwd Temperature condenser max: 1 to 80°C Condenser vacuum max: 0 to 1000 mbar (absolute) (Condenser not suitable for overpressure!!) Temperature exchanger max: 1 to 80°C Medium exchanger: water Water pressure exchanger max: 10bar Exchanger material: CU-tinned Material condenser: stainless steel Technical questions or other sizes on request.

Condition: new, functionality: fully functional, power: 11.2 kW (15.23 HP), gearing type: hydrostat, fuel type: hybrid, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 12 l, color: blue, overall weight: 2,900 kg, lifting power: 2,980 kg/m, lifting height: 16,950 mm, tire size: 950 × 180 mm (rupsen), tire condition: 100 %, emission class: euro5, Year of construction: 2024, operating hours: 1 h, Equipment: adjustable boom, adjustable chassis, low noise, onboard computer, rubber tracks, === KEY SPECIFICATIONS === Year: 2024 Operating hours: 0 (new) Max. lifting capacity: 2,980 kg (at 1.8 m – main boom) / 1,000 kg (at 5.2 m – jib) Max. lifting height: 16.95 m (with jib) Max. working radius: 14.3 m Power: Bi-energy (diesel + electric + battery) Remote control: Yes (fully proportional radio control) Jib: Included (3-section, hydraulic telescopic) Attachments / additional equipment: LED work lights, tilt alarm, hydraulic safety valves, datalogger, variable crawler gauge, automatic multi-position outriggers Track type: Rubber tracks (non-marking) Track size: 950 × 180 mm Track condition: New Weight: approx. 2,900 kg CE certification: Yes === HIGHLIGHTS === Bi-energy mini crane (diesel + electric) – suitable for indoor & outdoor use Zero-emission operation possible in electric mode Fully automatic telescopic boom with jib up to 16.95 m Fully proportional radio remote control Compact design (only 780 mm width) – ideal for confined spaces CE certified and ready for immediate use === CONDITION === New machine – never used. Factory-new condition with full warranty and CE certification. Color: blue Price: €119,500 (EXW / excl. VAT) === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery available. === DESCRIPTION === The Maeda MK 3053 CW is a modern bi-energy mini crane equipped with a fully automatic telescopic boom and 3-section jib, offering a maximum lifting height of 16.95 m and a working radius of 14.3 m. Thanks to the combination of a diesel engine and electric drive, this crane is suitable for both outdoor use and zero-emission indoor applications. With its compact dimensions and narrow crawler undercarriage, the MK 3053 CW is ideal for work in confined spaces such as installation, glazing, and maintenance projects. The fully proportional radio remote control ensures maximum precision and ease of operation. Nwsdpfxsxg A Two Ah Rsd === DELIVERY === Crane loading available on request. Flexible transport solutions tailored to your project and destination. All logistics handled professionally by Collé Rental & Sales.

Condition: new, functionality: fully functional, power: 7.5 kW (10.20 HP), fuel type: electric, color: green, overall weight: 2,880 kg, lifting power: 2,980 kg/m, lifting height: 16,950 mm, tire size: 950 × 180 mm (rubberen rupsen), tire condition: 100 %, mast type: telescopic, Year of construction: 2024, Equipment: UVV, adjustable boom, crane, hydraulics, low noise, onboard computer, rubber tracks, === KEY SPECIFICATIONS === Year of manufacture: 2024 Nsdsxg A Ibepfx Ah Rjwd Operating hours: New Max. lifting capacity: 2,980 kg (at 1.8 m) / 1,000 kg (at 4.7 m – jib) Max. lifting height: 16.95 m Max. working radius: 14.3 m Drive system: Fully electric (battery powered) Remote control: Yes (radio remote, proportional) Jib: Included (3-section, hydraulic telescopic) Attachments / additional equipment: Hydraulic winch, hydraulic telescopic jib, remote control, LED work lights, safety valves, tilt alarm, datalogger, non-marking rubber tracks Track type: Rubber tracks (non-marking) Track size: 950 × 180 mm Track condition: New Weight: approx. 2,875 kg CE certification: Yes === HIGHLIGHTS === Fully electric mini crawler crane (zero emission) Ideal for indoor and emission-restricted environments Low noise operation Fully automatic 5-section telescopic boom 360° continuous slewing with precise control Fully variable hydraulic outriggers Low ground pressure, suitable for sensitive surfaces CE certified and ready for immediate use === CONDITION === New machine – factory condition, unused and immediately available. Fully tested and inspected. Inspection available upon request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery possible. Price: €149,500 (EXW / excluding VAT) The Maeda MK 3053 CB is a compact and powerful fully electric mini crawler crane, offering a maximum lifting height of 16.95 metres and a lifting capacity of up to 2.98 tonnes. Thanks to its battery-powered electric drive system, this crane is perfectly suited for indoor applications and environments with strict emission requirements. Its compact dimensions and precise radio remote control make the MK 3053 CB ideal for installation, glazing and maintenance work where precision, low noise and zero emissions are essential. === DELIVERY === Crane loading available on request. Flexible shipping options tailored to destination and logistical requirements. All transport is handled professionally by the Collé Rental & Sales logistics team.

Condition: excellent (used), functionality: fully functional, Rotating live center SK 30 Rotor Switzerland Machine center SK30 with M12 draw-off thread (without milling for drive dog slot) Rotor – Machine center - M12 - spindle, bearings, etc. as per ROTOR MK 3 HP-Line - 60° hollow center as per drawing Maximum runout deviation of 60° hollow cone 0.003 mm High-precision rotating center MK3 from the High-Precision line for grinding, e.g., for Kapp grinding machine, as well as for fine turning operations Nwjdpewb Dq Ajfx Ah Red Price on request / special price All technical details subject to errors/typos Sale exclusively to EU countries.

Condition: new, Year of construction: 2026, You can smoke pices of meat, meat products(sausages, salami), fish, poultry pieces, cheese etc. Capacity: max 200kg Option of hanging with rods or trolley Easy to clean and operate It has three operating modes: dehydrating, cold smaking and thermal treatment Option of setting processing time and temperature Nwedpfx Aspuhtzsh Red Option od adjusting and saving programs. Dimensions: 1630x1220x2450 mm, Weight420kg, 400V, 9kW Material: Stainless steel 304 2 Jears warranty

Condition: new, Year of construction: 2026, functionality: fully functional, Type RLK: Roller conveyor length stop with retractable stop carriage to the rear. Length – 3 m Nsdjypwkwjpfx Ah Rowd

Condition: new, PRICE: 13000 EUR Cutter Manufacturer: Talsa Model: K30ns Strong, all stainless steel construction, solid bowl and lid Very high cutting speed, fully variable from 500 up to 3500 rpm Smooth start of knives due to electronic drives, overload protection Electric device to prevent condensations inside the machine frame Transparent noise protection cover Nodpfx Ahsuphguo Rswd Volume: 30 liters Bowl Capacity: ± 5-22 kg Electric power: 5.6kW Voltage: 380V 50Hz Weight: ± 330 kg

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator and dryer is available. 1) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 2) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 3) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Nedjx Ih D Topfx Ah Rowd

Condition: used, Year of construction: 1988, pressure 300 t Nedpovut Hnofx Ah Rowd distance between columns 1800 mm stroke 1000 mm Distance table/ram, max. stroke up, adjustment up 1300 mm Table surface area 1600 x 1200 mm Table height above floor 1080 mm Ram surface 1600 x 1200 mm Weight 24,0 t Dimensions (WxDxH) 2,8 x 2,1 x 6,0 m permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available

Year of construction: 1988, condition: new, Maker: SKF Nwedjdqrbhjpfx Ah Red Model : 24160C CK 30/W33 6 pcs in stock 156 kg/ pcs

Condition: used, maximum load weight: 28,660 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2026, loading space length: 7,700 mm, total width: 2,550 mm, total height: 3,300 mm, Equipment: ABS, Wiese Semi-trailer Hooklift | Excellent condition | Immediately ready for use * 30 t hooklift system * Radio remote control * Roller height: 1,500 mm * Cargo area length: 7,780 mm * Height: 3,300 mm * Width: 2,550 mm * Fifth wheel height: 1,150 mm to 1,250 mm * Permissible gross weight: 36,000 kg * Unladen weight: 7,340 kg * SAF axles * Air suspension * ABS * Self-steering trailing axle * Steel rims * Wheel chocks * Mechanical Jost landing legs Nwodpfx Asytzdpoh Red * Multi-chamber lights * Stainless steel toolbox For further information, we are at your disposal

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2027, type of input current: three-phase, machine/vehicle number: 2026, Cream cooker CM 30 Rational work in cooking and heating of creams and masses accurate temperature control digital timer Boiler filling 30 liters Mass 2 min - 19 max. Liter capacity stainless steel Nwedpfx Asd Hihdsh Rsd Machine mobile with lock DGUV V3 tested Connection 400V, 3.75 kW, 16A-CEE plug Dimensions 650 x 610 x 1310 mm, WxDxH NEW machine with warranty

Condition: excellent (used), color: blue, lifting height: 30,000 mm, Year of construction: 2019, operating hours: 981 h, Empty weight: 3.475 kg Make of engine: Honda Lifting capacity: 1.500 kg Technical condition: very good Visual appearance: very good Delivery terms: EXW Transport dimensions (LxWxH): 9,312x2,372x2,505 Production country: BE Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Bocker AHK 30/1500 KS • 2019 • 981 working hours • Gasoline drive • Remote control • Automatic outrigger • Variable outrigger • Wheel drive • 1500 kg lifting capacity Njdsyappyepfx Ah Rjwd • 30 meter hook height • 25 meter horizontal reach

Condition: excellent (used), color: green, lifting height: 30,000 mm, Year of construction: 2011, operating hours: 2,958 h, Empty weight: 3.490 kg Make of engine: Honda Lifting capacity: 1.400 kg CE mark: yes Technical condition: very good Visual appearance: very good Delivery terms: EXW Production country: DE Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Bocker AHK 30/1400 Nedpfx Ahsxb Uy Es Rjwd * 2011 * Petrol drive * 2958 working hours * 30-meter hook height * 25-meter horizontal reach * Remote control * 1400 kg lifting capacity * Wheel drive * Includes documents

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 2026, warranty duration: 6 months, input voltage: 400 V, year of last overhaul: 2026, DGUV certified until: 03/2027, working width: 300 mm, conveyor belt width: 320 mm, type of input current: three-phase, total height: 1 mm, Winding machine Model: MK 30 Dough weight up to approx. 250 grams Nsdjhfhpvjpfx Ah Rswd Wrapping tape width 320 mm Plastic-coated feed rollers for all sticks such as Kornspitz and pretzel sticks, Universal winding machine Stainless steel version Input shaft with safety edge DGUV V3 tested Mobile croissant wrapping machine Connection 400V, 1 kW, 16A-CEE plug Used machine overhauled with 6 months warranty Visit our large bakery machines warehouse!

Year of construction: 2009, condition: ready for operation (used), Two identical cooking kettles Steiner are available. Years of manufacture: 2009/2010, Volume: 300l, Heating type: steam, Max. steam pressure: 10bar, Kettle diameter: approx. 1000mm, Kettle depth: approx. 500mm, Machine dimensions X/Y/Z: approx. 1950mm/1200mm/1200mm, Weight: approx. 200kg. Documentation available. An on-site inspection is possible. Nwjdpfeyrtatsx Ah Rod

Condition: good (used), functionality: fully functional, machine/vehicle number: 142005, input voltage: 400 V, DGUV certified until: 03/2027, overall weight: 300 kg, total width: 700 mm, total length: 750 mm, input frequency: 50 Hz, input current: 10 A, electrical fuse: 16 A, Spiral Mixer – Dough Machine Erka Model: HK 30 for approx.: max. 30 kg dough 2 speeds Machine is mobile Connection: 400V, 16A-CEE plug Used machine Nsdpewmvx Aefx Ah Rjwd We have more spiral mixers in stock!

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli OMK300 + UF 150/220 Turning length: 300 mm Maximum square bar: 100x100 mm Minimum square bar: 20x20 mm Copy turning operation Nwodpfsycv Emex Ah Rsd Drilling transfer UF 150/220

Condition: good (used), Year of construction: 2003, System with water basin and pumps, Nedpfxet Ah Acj Ah Rewd Total depth with water basin 1400 mm Total length: 8100 mm, Height: 2500 mm, Working direction: right to left

Year of construction: 2026, condition: new, functionality: fully functional, I´m offering brand new stackers incl brand new belt conveyors aas well to go with the stacker New design New Program New control system Sew Motors for Sweeper, Length adjustment and Lift Sweeper cycle time 0,5 sec Wood Stack for boards from 450mm to 3000mm. With brick, zigzag and normal stacking. Nwodjx Rdwzopfx Ah Rsd Sticks can be added as an optional. Technical info: Board length 450-3000mm Width 50-200mm Thickness 16-100mm Board weight max 15 Kg Layer weight max 100 Kg Pack size 1200x1200 ( Max 2000 Kg)

Condition: new, Compressive force: 30 to Piston stroke: 150 mm table width: 185 mm passage (E): 535 mm passage (F): 140 mm distance cylinder - table (F1): 40 mm distance cylinder - table (F2): 1100 mm cylinder movable (M): 200 mm width (A): 800 mm depth (B): 700 mm Height 1 (C):1770 mm height 2 (D): 1800 mm Weight: approx. 168 kg Njdpfx Ahob Ibdlo Rswd Equipment: - Two adjustable speeds for piston feed by means of hydraulic pump. - Powerful workshop presses for craftsmen and repair shops - Optimal price-performance ratio due to rational design - The standard foot pedal leaves the hands free for the workpiece - Increased range of application due to the optionally available pressure mandrel set (10 pcs.). - Pressure cylinder with integrated return spring for piston retraction - Welded steel frame for heavy duty and high stability - Versatile use due to pressure cylinder that can be moved to the left and right

Condition: excellent (used), Glass cooking wok 300 litre and side wall scrape. With thermial oil boiler. Tilts both sides. Nwedpfx Ajumb Hioh Rjd

Condition: used, mileage: 50,887 km, power: 330 kW (448.67 HP), first registration: 04/2010, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2028, brakes: retarder, color: red, gearing type: automatic, emission class: euro5, Year of construction: 2010, Equipment: air conditioning, all wheel drive, crane, parking heater, Internal vehicle no.: T200028 German vehicle Available immediately at our yard in Kaufungen, Kassel More INFO at: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Manufacturer: Manitowoc Load moment 1230 kNm Carries 45 tons at 2.5 m reach Load capacity 35 t at 3 m reach Maximum load moment 125 kNm Reach of 34 m MAX. 47 m reach 360-degree rotation Combined engine for driving and crane operation, HINO E 13 C, 6 cylinders, Euromot III A, 330 kW at 1,800 rpm Torque: 1,930 Nm at 1,300 rpm Operating hours: approx. 5,900 Financing example: * Internal number: T200028 * Purchase price: €120,000.00 * Down payment: 10% * Term: 60 months * Monthly rate: €1,879.49 * Residual value: €24,000.00 If you are interested in this offer or would like to customize it according to your needs, please contact Mr. Enchev. We look forward to your call. Nwsdpfjynu Taex Ah Rjd Errors excepted. We are happy to accept your used vehicle in part exchange. Financing directly through us is possible. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.