Used K30 for sale (184)

Condition: used, Year of construction: 1991, measuring range X-axis 300 mm Ksdpfxjtv Icnj Aanofa measuring range Y-axis 300 mm Table dimensions 800 x 800 mm taper ISO 30 voltage 220 V / 50 Hz total connected load 0,3 kW weight 0,5 t dimensions of the machine ca. 1,5 x 1 x 1,6 m • Tool presetter with taper SK 30, SK 40 is also optionally possible, • Display of measured value ZOLLER DA 6050 / 0266, serial no: H320/066

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 03/2007, * BPW axles * Gergen GJ-SRK 30/75K roll-off body, built in 2007 * Unladen weight: 9,500 kg Kedpfx Ajwbypheansfa -----Internal vehicle number: 10757----Subject to errors and prior sale.

Condition: new, empty load weight: 915 kg, maximum load weight: 2,085 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: black, construction height: 1,260 mm, working width: 1,930 mm, E-hydraulics / steel drop sides / emergency hand pump / full steel floor, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / steel drop sides / emergency hand pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,000 kg - Unladen weight: 915 kg - Payload: 2,085 kg - Interior dimensions: 314 x 175 x 35 cm (L x W x H) - Overall exterior dimensions: 450 x 193 x 126 cm (L x W x H) - Loading sill height: 75 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100km/h: at extra charge - incl. Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: double-walled steel drop sides, 4x folding & removable - Drop side height: 35cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, three-sided - Hydraulics: electric & emergency hand pump tipping - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge - Lashing eyes: 6 pieces in the floor (800kg/daN) - Supports: at extra charge - Ramps: at extra charge Standard equipment: - STAHL drop sides anodized double-walled - Drop sides foldable at the side and rear - Drop sides removable - Tailgate also swingable - Full steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available - Many options available - Many options available - Many options available - Many options available. hot-dip galvanized - many stable cross members for high point loading - additional longitudinal struts welded in throughout - E-hydraulics for tipping with battery in the box and cover - 71AH battery - battery is charged via 13-pin plug from the towing vehicle (provided all pins of the socket are connected) - external battery charging socket for 230V charger - emergency hand pump, for manual tipping when the battery is empty - lashing hooks welded to the bottom of the frame - automatic reversing system - ALKO overrun device and parking brake - ramp rail shaft as preparation for aluminum rails for easy retrofitting - sturdy angle lever locks - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible Ksdpou Hr I Ssfx Aanjfa

Condition: excellent (used), Year of construction: 1998, sheet thickness steel (max.): 6 mm, table height: 900 mm, overall weight: 1,550 kg, total length: 1,500 mm, total width: 1,200 mm, total height: 1,250 mm, cutting length (max.): 200 mm, Hydraulic corner shear with infinitely adjustable angle between 30 and 120 degrees. Capacity St 40 max. 200 x 200 x 6 mm, Rvs 200 x 200 x 4 mm. Equipped with 2 stops with degree graduation and foot pedal for operation. Kfsdpfx Aaewqfwcjnoa

Condition: good (used), functionality: fully functional, total height: 3,500 mm, total width: 2,800 mm, total length: 1,200 mm, pressing force: 300 t, ID105830 Hydraulic press Kodpowhc H Aefx Aanefa Brand: Van De Graaf Type: HVK-300 Capacity: 300 tons

Condition: excellent (used), Glass cooking wok 300 litre and side wall scrape. With thermial oil boiler. Tilts both sides. Kedsumb Hispfx Aanjfa

Condition: as good as new (ex-display), Year of construction: 2007, I - beam section - flat steel 50 x 10 mm I-beam section - upend 80 x 15 mm L-beam 50 mm round material 30,0 mm bar material dia. max. 1 1/2" mm bar material - diameter 30,0 mm weight 0,185 t range L-W-H 670 x 530 x 1350 mm square material 40 x 40 x 3 mm Kfodpfet U R H Usx Aanoa pipes 60 x 2,0 mm total power requirement 0,75 kW Demonstration device Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) • Possible to bend horizontally and vertically

Condition: new, empty load weight: 915 kg, maximum load weight: 2,085 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 700 mm, loading space volume: 3.9 m³, color: silver, construction height: 1,700 mm, working width: 1,930 mm, Alubord wall attachment 60cm / E-hydraulics / steel drop sides / emergency hand pump / full steel floor, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. Alubord wall attachment 60cm / E-hydraulics / steel drop sides / emergency hand pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,000 kg - Unladen weight: 915 kg - Payload: 2,085 kg - Interior dimensions: 314 x 175 x 70 cm (L x W x H) - Overall exterior dimensions: 450 x 193 x 170 cm (L x W x H) - Loading sill height: 75 cm - Tires: 195/50R13C steel rim - Brakes: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - Incl. Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: double-walled steel drop sides, 4x folding & removable - Drop side height: 35cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, three-sided - Hydraulics: electric & emergency hand pump tipping - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: 60cm aluminium dropside attachment - Lashing eyes: 6 pieces in the floor (800kg/daN) - Supports: at extra charge - Ramps: at extra charge - Lighting plug: 13-pin - Approval: COC papers Equipment: - Aluminium dropside attachment 600mm HTK.31 - STAHL drop sides anodized double-walled - Drop sides can be folded to the side and rear - Drop sides can be removed - Rear flap can also be swivelled - Full steel floor - Extremely robust - Very stable welded steel frame - Frame completely hot-dip galvanized hot-dip galvanized - many sturdy cross members for high point loading - additional longitudinal struts welded in throughout - electric hydraulics for tipping with battery in the box and cover - 71AH battery - battery is charged via 13-pin plug from the towing vehicle (provided all pins of the socket are connected) - external battery charging socket for 230V charger - emergency hand pump, for manual tipping when the battery is empty - lashing hooks welded to the bottom of the frame - automatic reversing system - ALKO overrun device and parking brake - ramp rail shaft as preparation for aluminum rails for easy retrofitting - sturdy angle lever locks - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing light - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - corrugated grille attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - Kfjdpfx Aaou Skqisnea

Condition: new, empty load weight: 940 kg, maximum load weight: 2,060 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,130 mm, loading space width: 1,740 mm, loading space height: 400 mm, loading space volume: 2.1 m³, color: silver, construction height: 1,260 mm, working width: 1,910 mm, E-hydraulics / Fuhrmann full steel drop sides / emergency hand pump / full steel floor, automatic reverse drive, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / Fuhrmann full steel drop sides / emergency hand pump / full steel floor Technical data: - Make: Humbaur - Model: HTK 3000.31 - Vehicle type: Three-way tipper - Vehicle condition: New vehicle - Initial registration: Without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (L x W x H): 313 x 174 x 40 cm - External dimensions (L x W x H): 455 x 191 x 126 cm - Loading height of floor: 75 cm - Gross vehicle weight: 3,000 kg - Unladen weight: 940 kg - Payload: 2.060 kg - Chassis: High loader (wheels under the body) - Tyres: 185R14C - Chassis: ALKO rubber spring axle - Support wheel: Yes, automatic - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Double-walled steel drop sides - All drop sides can be folded and removed - Steel corner stanchions can be removed - Rear flap can also be swiveled - Insertion option at all 4 corners for tarpaulin frames, lattice attachment, drop side attachments or front wall extension - Sturdy angle lever locks - Full steel floor - Extremely robust - Very sturdy bolted V-drawbar REINFORCED - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options for attaching tarpaulin frames, lattice attachments, drop side attachments or front wall extensions. hot-dip galvanized - many cross beams therefore high point load - additional longitudinal struts welded in throughout - E-hydraulics for tipping with battery in the box and cover - 71AH battery - battery is charged via 13-pin plug from the towing vehicle (provided all pins of the socket are occupied) - external battery charging socket for 230V charger - emergency hand pump, for manual tipping when the battery is empty - 6 lashing brackets recessed inside the side edge (800DaN/kg) TÜV certified! - Solid 4-stage hydraulic cylinder - Maintenance-free rubber spring axles from ALKO - Automatic reverse drive - ALKO overrun device and parking brake - Drive-on rail shaft as preparation for aluminum rails for easy retrofitting - 13-pin plug - Reversing lights - Large dimensioned safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Automatic support wheel in the middleaccessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Kedpsu Skwisfx Aanefa

Condition: new, empty load weight: 735 kg, maximum load weight: 2,265 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 300 mm, loading space volume: 1.7 m³, color: silver, construction height: 970 mm, working width: 1,890 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, electric & emergency hand pump / full steel floor, * IMMEDIATELY AVAILABLE * incl. electric & emergency hand pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,000 kg - Unladen weight: 735 kg - Payload: 2,265 kg - Interior dimensions: 314 x 175 x 30 cm (L x W x H) - Overall exterior dimensions: 451 x 189 x 97 cm (L x W x H) - Loading sill height: 67 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Side walls: anodized aluminium double-walled, 4x folding & removable - Side wall height: 30cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, backwards - Hydraulics: electric + emergency hand pump tipping - Tipping angle: approx. 45 - Steps hydraulic cylinder: 4 steps - Overrun device & brake: ALKO - Frame/chassis: Welded hot-dip galvanized steel frame - Attachment: at extra charge - Lashing eyes: 8 pieces in the floor (800kg/daN) - Supports: at extra charge - Ramps: at extra charge Standard equipment: - Anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Full steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available hot-dip galvanized - many sturdy cross members for high point loading - additional longitudinal struts welded in throughout - lashing hooks welded to the bottom of the frame - automatic reverse drive - ALKO overrun device and parking brake - sturdy tension locks - very sturdy V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Optional equipment included in the price: - E-hydraulics for tipping with battery in the box and cover - Emergency hand pump Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - sheet metal attachment closed 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Kfsdsu Hr Ilspfx Aansa

Condition: new, empty load weight: 790 kg, maximum load weight: 2,210 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,750 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: silver, construction height: 1,130 mm, working width: 1,910 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, roof window, electric pump / full steel floor, * IMMEDIATELY AVAILABLE * incl. electric pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,000 kg - Unladen weight: 790 kg - Payload: 2,210 kg - Interior dimensions: 306 x 175 x 35 cm (L x W x H) - Overall exterior dimensions: 450 x 191 x 113 cm (L x W x H) - Loading sill height: 78 cm - Tyres: 185R14C steel rims - Brakes: yes - Support wheel: yes - 100 km/h: at extra charge - incl. vehicle documents Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Drop sides: anodized aluminium double-walled, 4x folding & removable - Drop side height: 35cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, three-sided - Hydraulics: electro-hydraulic pump - Tipping angle: approx. 45 - Hydraulic cylinder stages: 3 stages - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at an extra charge extra charge - Lashing eyes: 6 pieces recessed in the floor - Supports: extra charge - Ramps: extra charge Standard equipment: - Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics - Hollow profile construction welded and completely hot-dip galvanized - Preparation for loading rail bracket - Double-walled anodized aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Full steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized. hot-dip galvanized - many sturdy cross beams for high point loading - additional longitudinal struts welded in throughout - electro-hydraulic pump - automatic reverse drive - ALKO overrun device and parking brake - sturdy tension locks - very sturdy V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - reinforced, automatic jockey wheel for safe parking of the loaded trailer, load capacity 500 kg - Premium maneuvering handle with tensioning straps - registration documents: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - rear supports - ramps - flat tarpaulin - net hooks - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Kfsdpsu N Nhujfx Aanoa

Condition: new, empty load weight: 870 kg, maximum load weight: 2,130 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: silver, construction height: 1,260 mm, working width: 1,930 mm, E-hydraulics / emergency hand pump / full steel floor, automatic reversing, hot-dip galvanizing, roof window, * IMMEDIATELY AVAILABLE * incl. E-hydraulics / emergency hand pump / full steel floor Technical data: - Type: New vehicle - TÜV: New/2 years - Availability: IMMEDIATELY! - Gross vehicle weight: 3,000 kg - Unladen weight: 870 kg - Payload: 2,130 kg - Interior dimensions: 314 x 175 x 35 cm (L x W x H) - Overall exterior dimensions: 450 x 193 x 126 cm (L x W x H) - Loading sill height: 75 cm - Tyres: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - 100 km/h: at extra charge - incl. vehicle documents Vehicle superstructure: - incl. electric hydraulic pump - incl. electric hydraulic pump Vehicle documents Vehicle superstructure: - Floor: solid steel floor, solidly reinforced - Side walls: anodized aluminium double-walled, 4x folding & removable - Side wall height: 35cm - Chassis: high loader, ALKO rubber spring axle - Tipping function: yes, three-sided - Hydraulics: electric & emergency hand pump tipping - Tipping angle: approx. 45 - Steps hydraulic cylinder: 3 steps - Overrun device & brake: ALKO - Frame/chassis: welded hot-dip galvanized steel frame - Attachment: at extra charge - Lashing eyes: 6 pieces in the floor (800kg/daN) - Supports: at extra charge - Ramps: at extra charge Standard equipment: - Anodized double-walled aluminium drop sides - Drop sides can be folded to the side and rear - Removable drop sides - Tailgate can also be swivelled - Full steel floor - Extremely robust - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many options available - Many options available - Many options available - Many options available - Many options available. hot-dip galvanized - many sturdy cross members for high point loading - additional longitudinal struts welded in throughout - electric hydraulics for tipping with battery in the box and cover - 71AH battery - battery is charged via 13-pin plug from the towing vehicle (provided all pins of the socket are connected) - external battery charging socket for 230V charger - emergency hand pump, for manual tipping when the battery is empty - lashing hooks welded to the bottom of the frame - automatic reversing system - ALKO overrun device and parking brake - ramp rail shaft as preparation for aluminum rails for easy retrofitting - sturdy angle lever locks - very sturdy bolted V-drawbar REINFORCED - 13-pin plug - reversing lights - large reversing lights plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in rear frame - automatic center support wheel - registration papers: ZBII and COC papers Accessories can be retrofitted - please enquire: - 100km/h approval with shock absorbers - side wall attachment - corrugated grid attachment 60cm - closed sheet metal attachment 60cm - spare wheel - storage box - battery - 230V charger - rear supports - ramps - flat tarpaulin - net hooks - additional lashing eyes - slotted-hole rails for tension belts & locking beams - bar strip with rubber coating for tension belts & locking beams - reversing lights - lashing straps - and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlem Kfedpfeu Hr I Esx Aanja

Condition: good (used), Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling holders: SK30 23 pieces -Type: various versions, see photos -Price/Delivery: complete -Transport dimensions: 480/400/H315 mm -Total weight: 20.2 kg Kfjdpjtxkuhofx Aanoa

Condition: like new (used), functionality: fully functional, Fixed carbide (HM) centre point SK 30, e.g. for KAPP grinding machine Tailstock centre Mount SK30 with M12 internal thread KAPP part no. 2.500.55.848.00 Carbide tip 60°, Ø18 mm Price on request All technical data subject to errors/typos Sale exclusively to EU countries Kfjdpfx Asx Ekd Dsanja

Condition: good (used), Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves -Milling holders: SK30 34 pieces Kodpfx Aaetpdmnenofa -Collet sleeves: 27 pieces -Type: various versions, see photos -Price/Delivery: complete -Transport dimensions: 650/550/H250 mm -Total weight: 29.1 kg

Condition: good (used), Tool holder, milling holder, collet holder, collet chuck, chuck, milling tool, adapter, clamping unit, tool holder, collet sleeves Kfsdpfowylknsx Aansa -Milling holders: SK30 3 pieces -Type: various versions, see photos -Price/Delivery: complete -Transport dimensions: 150/65/H145 mm -Total weight: 1.8 kg

Condition: ready for operation (used), Year of construction: 1998, General Data Measurements width 315 mm Measurements depth 685 mm Measurements height 540 mm Machine weight 4500 kg Control Unit Brand HEIDENHAIN Model TNC 426 Main Drive Spindle motor power 11 kW Kfjdpfx Aaox I S Rkenja Number of axis 3 Movement X-Axis Movement 685 mm Y-Axis Movement 315 mm Z-Axis Movement 540 mm Table Table load 250 kg Additional Equipment Through-spindle cooling: 70 bar Linear scales Automatic central lubrication Automatic coolant cleaning with external filter unit Electronic handwheel This 3-axis FEHLMANN Picomax 82 CNC was manufactured in 1998. It features a Heidenhain TNC 426 control, with travel dimensions of 685/315/540 mm, and a maximum spindle speed of 16,000 rpm. The tool magazine holds 32 tools, SK30, and the machine supports a maximum table load of 250 kg. Consider the opportunity to buy this FEHLMANN Picomax 82 CNC vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: new, HOLZ-HER 1308 XL AURIGA POWER Edge Banding Machine -Showroom Machine- New: GLUJET GJ725 This offer is an equipment package. The following items and options are already included in the price: - Extendable workpiece support Kfsdpfx Aju R Sy Aoansa - Edge Control PPC 322 W - ECO MODE energy saving mode - FG201 jointing milling unit with 2 milling heads - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, counterclockwise rotation - Diamond cutter Ø 70 x 64 x 30 mm, 2+2 teeth, clockwise rotation - 1903 edge feeder - Glu Jet GJ725 NC PUR PRO adhesive application system - 1912-3 pneumatic pressure unit - 1918 pneumatic trimming unit, 60 mm - FR301 MOT6 multi-function milling unit - Diamond cutter Ø 56/60 mm, counterclockwise rotation - Diamond cutter Ø 56/60 mm, clockwise rotation - FF301 MOT1 corner rounding unit - Scraper unit ZK301 MOT4 including high-gloss package - HW indexable inserts for scraper holder - Chip collection box for scraper unit - 1940 buffing unit - TR301 spraying device for the infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic adaptive pressure and adhesive quantity control - Long infeed guide, 1,252 mm - Motorized infeed guide adjustment - DW301 printing unit with motorized NC axis - Extraction hoods for 1918 trimming unit - FK701 flat scraper - GM301 spraying device after printing unit - New exhibition machine -

Condition: used, Year of construction: 2013, operating hours: 45,500 h, functionality: fully functional, machine/vehicle number: 16546, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Pallet Changer: -> Included Spindle: -> Tool holder: HSK63 -> Speed: 20,000 rpm Linear Axes: -> X-axis: 750 mm -> Y-axis: 750 mm -> Z-axis: 725 mm Tool Changer: -> 60 positions This machine is equipped with a coolant filtration system with chiller. • Manufacturer: KNOLL Maschinenbau GmbH / HYFRA Industriekühlanlagen GmbH • Model: PF 210 (Knoll) + TRK30-EF-S (Hyfra Pedia) • Year of manufacture: 2012 • Serial numbers:  - KNOLL: 501973 / 201139433  - HYFRA: 12030089 • Electrical connection: 3×400 V / 50 Hz • Control voltage: 24 V DC • Power consumption: 11.1 kW (Knoll) + 4.8 kW (Hyfra) • Fuse protection: 16 / 25 A (Knoll), 16 A (Hyfra) Kedpfxox Hilvj Aanofa • Cooling capacity (chiller): 3.8 kW at 42 °C • Refrigerant: R134a, 1.6 kg • Max. pressure: 20 bar • Weight (with coolant): 140 kg Note: Machine/asset does not include any product-related tools, fixtures, or robot grippers. Spindle hours: approx. 9,300 Operating hours: approx. 45,500

Condition: new, Year of construction: 2025, functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 200 mm, feed length Z-axis: 350 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 80 rpm, total height: 1,550 mm, total width: 1,410 mm, total length: 11,150 mm, overall weight: 500 kg, The EMCOMAT FB-3 L is ideal for use in tool and mould making, in apparatus and prototype construction and in small series production. It has also proven itself many times in schools and training workshops. As the smallest machine in the EMCO milling machine range, the FB-3 L already meets the highest demands for accuracy and flexibility - and that at an unbeatable price-performance ratio. Travel in X/Y/Z 300 / 200 / 350 mm Distance spindle nose table 80 - 430 mm Clamping surface 600 x 200 mm (rigid angle table) Kodpfx Aasdtm Ahensfa Max. table load table load 50 kg (rigid angle table) Speed range 80 - 2200 rpm Power 1,4 kW Tool holder SK30 DIN2080

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 40 Working width (min/max) mm 225 / 2500 Numerical Control POWERCONTROL PC23 Power Touch /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 1000 Working line (work units support tables), manual adjustment mm 30 – 80 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) + Free Space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + QA65 Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL PK30 (2 x kW 0,8), speed 30 m/min Rough Trimming unit BF20 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FF30 + FF32 (4 x kW 0,4) with FlexTrim Free Space Profile edge scraping unit PN 20 Finish processing unit (Glue scraper + Buffing unit) FA 21. Spraying Unit (for polishing liquid) Kedsv Rpdnepfx Aanjfa No. 3 Milling grooving unit SF20 (1 x Left + 2 x Right) (3 x kW 6,6) (N.C. adjustment)

Condition: ready for operation (used), Siemens 1FK7060-5AF71-1KG0 SN: YFC736147001002 with AM16DQ K30 encoder – overhauled with 12 months warranty!, used, good condition, 100% functional, delivery scope as per photos, professionally fully overhauled and tested with 12 months warranty, 100% functional, delivery scope as shown in photos. Kfodpfx Aaow Nmldsnja

Condition: ready for operation (used), Year of construction: 1995, Control Unit Brand SIEMENS Model Sinumerik 810D Main Drive Spindle speed range 10000 rpm Spindle motor power 95 kW Number of axis 2 Kfodpfx Asx D Ryaeanea Movement X-Axis Movement 550 mm Y-Axis Movement 300 mm This CHIRON FZ 12 W was manufactured in 1995. A vertical machining center featuring a SK30 spindle mount, maximum spindle speed of 10,000 rpm, and a tool magazine with 12 positions. It includes a Sinumerik 810D control system and rapid traverse rates up to 40 m/min. Table size measures 660 x 350 mm. Consider the opportunity to buy this CHIRON FZ 12 W vertical machining center. Contact us for more information. Application Types Milling

Year of construction: 1997, condition: excellent (used), machine/vehicle number: 1095, Dear Customers Currently we offer you a universal milling machine for the model and mold making of the brand Zimmermann. Here are the technical data of the machine: Kfedpoxy Ntqsfx Aanja Work table: 630 x 490 mm Support table: 490 x 400 mm Round movement: 360 ° Pivoting: 2x 90 ° Tension groove: 14 x 25 mm Power: 1,1 kW Speeds: 560 - 14,000 rpm Tool holder: ISO30 / SK30 - Motorbrake - motor-driven height adjustment - digital read-out with Heidenhain meassuring system - cabinet Space required: 1,400 x 1,520 x 1,970 mm Weight: 790 kg The machine was cleaned completely including the support table. The technical as well as optical condition of the machine is top! We look forward to your questions and inquiries.

Year of construction: 2005, condition: good (used), CNC control Tekna SLW 8 tool places pneumatic clamping device Technische Daten / technical details: X-Weg / X-travel 4000 mm Y-Weg / Y-travel 270 mm Z-Weg / Z-travel 270 mm Kodoklzzlepfx Aanefa Spindelaufnahme / spindle taper SK30 Drehzahlbereich Spindel / spindle speed 18000 Upm /rpm Antriebsleistung / drive capacity 7 kW Gewicht der Maschine ca. / weight 1100 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.