Used Kaltenbach for sale (109)

Condition: good (used), Year of construction: 1984, machine/vehicle number: 102335, Offer 23172 Technical data: Dkedpjrmkl Asfx Ap Dou - Saw blade diameter up to 400 mm - Cutting range with saw blade diameter 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Mitre adjustment left + right 0 - 90 ° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - Pneum. Material vice with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg - Outfeed roller conveyor 3000 mm - Infeed roller conveyor 3000 mm

Condition: ready for operation (used), Year of construction: 1980, Saw blade diameter: 400 mm Cutting capacity at 90° round: 120 mm Rectangular: 200 x 80 or 150 x 70 mm Dsdpfx Aox Anl Dep Dsku Mitre cut at 45° rectangular/flat: 150 x 70 mm Upright: 100 x 60 mm 2 cutting speeds via pole-changing motor: 19 and 28 m/min Feed rate hydraulically infinitely adjustable: 0 - 1000 mm/min Drive motor: 380 V, 1.7/2.6 kW Weight: approx. 850 kg Required space: 1200 x 1100 x 1620 mm

Condition: good (used), Year of construction: 1968, Saw blade diameter 370 mm Cutting capacity 45° - 90 round 115 mm flat approx. 215 x 20 mm rectangular approx. 95 x 105 mm U-profile approx. 160 x 55 mm Cutting speed 30, 60, 130 and 260 m/min Motor power approx. 2.6 kW Dimensions L x W x H 1100 x 1050 x 1600 mm Weight 850 kg Accessories / Special features: - Semi-automatic operation - After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released again. - Hydro-pneumatic stepless saw blade feed - Mitre cut on both sides R - L Dsdorwyfqopfx Ap Djku - 0° longitudinal cut possible - Coolant system - 1 saw blade Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1989, Saw blade diameter: 400 mm Dedpfx Apsx Rvb Se Dsku Cutting diameter: 130 mm Cutting range at 90°: flat – 260 x 60 mm Cutting range at 90°: square – 105 mm Cutting range at 45°: flat – 200 x 45 mm Cutting range at 45°: square – 90 mm Speed range, 2 steps: 1400 / 2800 rpm Drive power, pole-changing: 2 / 4 kW Machine dimensions (L x W x H): approx. 1100 x 1100 x 1700 mm Weight: approx. 850 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 1980, Circular saw with miter cutting capability. Manufacturer: KALTENBACH, Type: KKS 400 M, Year of manufacture: approx. 1980. Hydraulic feed, infinitely adjustable. Saw blade: 400 mm. Dedpfx Apeixumvj Doku

Condition: used, Year of construction: 1999, cutting width 150 mm Dksdjva Nqgepfx Ap Deu machine weight ab. 300 kg 27468

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting length (max.): 760 mm, cutting range round steel at 90°: 400 mm, saw band length: 5,920 mm, working height: 720 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw band dimensions: 5,920 x 41 x 1.3 mm Cutting speed: infinitely adjustable (1:7) Working range (round): max. 400 mm Working range (square): 400 x 370 mm Cut length (single stroke): 10 - 760 mm Cut length (multiple stroke): max. 9,999.9 mm Working height: 720 mm Clamping force: 3,600 N Min. finished part length: 10 mm (35 mm vertical) Note: Disassembly and loading can be offered by the seller at an additional cost. The roller conveyor is not included in the offer. Dksdpfx Apoy Ex E Nj Deu

Condition: used, Year of construction: 1983, saw blade diameter 400 mm cutting diameter 130 mm stroke 150 mm cutting range - square - 120 x 120 mm cutting range - flat - 300 x 40 mm capacity 45 degrees: round 130 mm capacity 45 degrees: square 110 x 110 mm capacity 45 degrees: flat 245 x 40 mm Dkjdpfx Aotqqrzjp Dsu mitter cutting - all-position 90 ° cutting speed 13 / 25 m/min control minipos 807 total power requirement 4,3 kW weight of the machine ca. 850 kg dimensions of machine L x W x H 1,20 x 1,20 x 1,82 m Accessories: ingoing and outgoing rollertrack each approx. 4000 mm long, NC length stop, coolant

Condition: used, saw blade diameter 400 mm cutting diameter 135 mm capacity 90 degrees: flat 280 x 70 mm capacity 90 degrees: square 120 x 120 mm capacity 45 degrees: flat 210 x 55 mm capacity 45 degrees: square 105 x 105 mm turning speeds max. 3000 U/min saw-blade dia. 400 x 3,2 x 40 mm motor 400 Volt total power requirement 4,0 kW weight 650 kg range L-W-H 910 x 1200 x 1700 mm Furnishing: - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece Dksdpoxabg Aefx Ap Dou - pneumatic tool clamping - Operation manual

Condition: good (used), Year of construction: 2000, Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, underfloor saw, aluminum circular saw, semi-automatic aluminum circular saw, chop saw, glass bead saw -Manufacturer: Kaltenbach, Cold circular saw, metal circular saw with roller conveyor left/right -Type: KKS 400 E Semi-automatic without material feed -Saw blade: Diameter 400 mm Dkodpfx Aox Sdpyop Dju -Drive power: 1.8 / 2.7 kW -Cutting area at 90 degrees flat: 305 x 20 mm / round Ø 130 mm -Cutting area at 45 degrees flat: 245 x 30 mm / round Ø 130 mm -Cutting range for square bars: 90° 120 mm / 45° 110 mm -Miter: swivels on both sides -Cutting speed: 13/26 m/min. -Saw blade feed speed: infinitely variable 0 - 1000 mm/min -Roller conveyor left: total 4000/345/H1000 mm -Roller conveyor right: total 6000/345/H1000 mm -Saw dimensions: 1150/930/H1765 mm -Overall dimensions: 10810/1150/H1765 mm -Total weight: 1190 kg

Condition: good (used), saw blade diameter: 400 mm, – Double mitering – Mist lubrication system – Protective cap Dksdjim Ezgjpfx Ap Deu – 400V

Condition: ready for operation (used), Year of construction: 1974, disk of circular saw-Ø: 400 mm cutting area at 90° round: 120 mm Dsdjtp Hgtspfx Ap Doku cutting area at 90° square: 200 x 80 mm cutting area in mitre at 45° square: 150 x 70 mm cutting speed: 13, 17, 26 m/min engine: 380 V, 1,7/2,2/2,6 kW space needed: 1050 x 1000 x 1680 mm weight: ca. 850 kg

Condition: used, Year of construction: 1972, 1 used, well-maintained, hydro-pneumatic, semi-automatic cold circular saw for cutting aluminum, non-ferrous metals, wood, and plastic Technical data: max. saw blade diameter 370 mm cutting diameter 120 mm cutting range at 90 degrees: flat 260 x 60 mm cutting range at 90 degrees: square 105 mm cutting range at 45 degrees: flat 200 x 45 mm cutting range at 45 degrees: square 90 mm 0° cut – longitudinal cut: yes 2 speed settings 1500 / 3000 m/min drive power 1.7 / 2.6 kW machine dimensions L x W x H 1000 x 1000 x 1700 mm machine weight 700 kg Accessories / Special features: • Semi-automatic operation: After starting, the workpiece is automatically clamped by the upper clamping cylinder. Once the set feed end is reached, the saw blade automatically moves down and the clamping jaw is released. Dsdpfxjbwl Ems Ap Deku • Stepless feed • Reversible motor • 1 saw blade • Double miter cut • Longitudinal cut 0° • Spray coolant system Optional accessories: - 1 roller guide right with heavy stop 3500 mm and scale - 1 roller guide left, approx. 3500 mm Price of optional accessories: 1,500.00 € plus VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm Dkedpfx Apohzbipe Dou IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: used, diameter of saw band: 350cutting area - round: 350cutting area rectangle: 350 x 350total power requirements: 2,2 Used cold circular saw Kaltenbach SKL 350 Cutting Capacity at 90°: Round: Up to 135 mm Square: Up to 120 mm Flat: Up to 70 x 280 mm Cutting Capacity at 45°: Square: Up to 105 mm Flat: Up to 55 x 210 mm Dkodpfev Ncpbox Ap Dju Saw Blade Speeds: 2,250 and 4,500 rpm Motor Power: 5/6 hp (approx. 3.7/4.5 kW) Weight: Approx. 650 kg Dimensions (L x W x H): Approx. 1,200 x 1,200 x 1,500 mm

Condition: used, Year of construction: 1998, saw blade diameter 450 mm cutting diameter 150 mm capacity 90 degrees: flat 330 x 40 mm Dkedpfx Apev Hth Ae Dsu capacity 45 degrees: round 140 mm capacity 45 degrees: flat 250 x 40 mm cutting speed 10 - 70 m/min saw head feed 0 - 1000 mm/min sawing motor 1,7 / 2,6 kW weight of the machine ca. 1,1 t Accessories: used sawblade 450 mmø, material feeder M 45 NC für autom. run, ingoing roller track 7000 mm, outgoing roller track 4000 mm

Year of construction: 1986, condition: good (used), machine/vehicle number: 106157, Offer 21035 Technical data: - Saw blade diameter up to 400 mm Dksdpfsg A Rgfox Ap Deu - Cutting range with a saw blade diameter of 400 mm - at 90° round 130 mm - square 120 mm - flat up to 260 x 60 mm - Miter adjustment left + right 0 - 90° - Cutting speed 1750 / 3500 m/min - Feed speed of the saw blade 0 - 3 m/min - Rapid return 3000 mm/min - Saw drive 400 V / 3.7 / 4.4 kW - 2 pneumatic material clamping devices with adjustable clamping pressure - Space requirement approx. W 1200 x H 1900 x D 1200 mm - Weight approx. 600 kg

Condition: used, Year of construction: 1991, saw blade diameter 400 mm cutting diameter 130 mm capacity 90 degrees: square 120 x 120 mm capacity 90 degrees: flat 220 x 80 mm feed length 600 mm feed length: multiple 1800 mm cutting speed 10/13/15/20/26/30 m/min mitre joint cuts -/+ degrees 60 total power requirement 5,5 kW weight of the machine ca. 1,8 t Dkjdpfxjv Hhrve Ap Dju dimensions of machine L x W x H 2,60 x 1,21 x 1,98 m - mitre cutting +/- 60 ° with DRO - Accessories: new sawblade 400 mmø, coolant

Condition: good (used), Year of construction: 1992, cold circular saw, metal circular saw, miter saw, circular saw, sawing system -Manufacturer: Kaltenbach, cold circular saw, metal circular saw type RKT 631 HG with roller conveyor left / right -Stop length: 3900 mm -max. saw blade diameter: 710 mm -Drive power: 3.0 / 5.0 kW -Rotating base adjustment: continuously left/right -Cutting area at 90 degrees flat: 400 x 120 mm / round Ø 220 mm Dkjdpfxsr R Abpj Ap Dsu -Cutting area at 45 degrees flat: 250 x 80 mm / round Ø 180 mm -Cutting speed: blade diameter 710 mm 11 / 22 m/min. -Saw blade feed speed: continuously variable 0 - 1000 mm/min -Accessories: incl. 2nd saw blade -Roller conveyor left: total 3500/1060/H1100 mm / weight 378 kg -Roller conveyor right: total 3960/1370/H1390 mm with stop / weight 670 kg -Dimensions saw: 1670/1760/H2020 mm / Weight 2340 kg -Total weight: 3381 kg

Year of construction: 1983, condition: used, Aluminum miter saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Saw blade diameter: 355 mm -Speeds: 1420/2880 rpm -Drive: 3.7/4.5 kW -with: coolant device -Dimensions: 990/1140/H1535 mm -Weight: 596 kg Dodpfed Ixn Rex Ap Deku

Condition: good (used), Semi-automatic cold circular sawing machine with roller table. Dkodpfx Aoq U N Ryjp Dou

Condition: used, Column-guided bandsaw, semi-automatic, METORA - KALTENBACH, type HMB 380 DS for 90° cuts only (Made in Austria) Machine no. 4580028, year of manufacture approx. 1993 Cutting range: round Ø 380 mm Square 380 x 380 mm Saw blade dimensions: 5650 x 34 x 1.1 mm Saw blade speed: 25-108 m/min, infinitely variable Material feed height: 870 mm Hydraulic drive power: 1.5 kW Saw motor drive power: 4 kW Power supply: 400 volts, 50 Hz - Fully hydraulic bandsaw in a two-column design - Hydraulic saw head lowering with infinitely variable cutting pressure adjustment - Lowering speed infinitely adjustable - Hydraulic clamping of the workpiece with hydraulic bundle clamping from above - Hydraulic unit integrated in the machine base - Material feed roller on the feed side with gear motor (not mounted on the machine frame) - Coolant system with coolant pump for water emulsion - Minimum quantity lubrication for the saw blade Dkjdpfx Aodzqtgsp Dsu - Electric heating element for coolant and hydraulics - Length stop, TRENNJAGER type EX-Stop1, with handwheel adjustment, digital display and hydraulic stop carriage clamping Stop base length 6750 mm, stop travel 5650 mm, stop arm can be hydraulically folded up without roller conveyor Footprint of the base machine L x W x H: 2800 x 1400 x 2450 mm Machine weight: approx. 3 tons Weight of the stop system: approx. 800 kg in good condition

Year of construction: 1987, condition: good (used), machine/vehicle number: 108922, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 305 x 40 mm cutting area in mitre at 45° round: 130 mm Dodpfx Ashz T Hfsp Doku cutting area in mitre at 45° square: 245 x 40 mm cutting speed: 10 m/min engine: 380 V, 1,7 kW space needed: 1100 x 1000 x 1900 mm weight: 700 kg

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Djdpfx Aod N Sm Dsp Doku +++++

Condition: ready for operation (used), Kaltenbach SKL lightweight aluminum circular saw 380 volts Saw blade diameter 350mm Dsdjgfb Hkepfx Ap Deku Miter angle left + right 30° Adjustable fence