Used Kappa 400 X Motion for sale (69,780)

Condition: excellent (used), For sale: SEW-EURODRIVE MOVIDRIVE® inverter with MDX60A0550-503-4-00 power module. This is a 55 kW frequency inverter designed to power three-phase 3×380–500 V motors. The parameters correspond to the MOVIDRIVE B series. Technical specifications Control unit Manufacturer: SEW-EURODRIVE Model: MDX61B0550-503-4-00 Controller type: MDX61B-00/0T P/N: 08279691 Control unit P/N: 08249571 S/N: 0159828 SO#: 01.1569277601.0001.08 Protection class: IP00 Country of manufacturer: Germany (Made in Germany) Power module Model: MDX60A0550-503-4-00 Sach. Nr.: 8226636 Nr.: 0588043 Input parameters Power supply: 3 × 380–500 V AC ±10% Frequency: 50–60 Hz ±5% Input current: 94.5 A (400 V) Operating temperature: 0–40°C Protection class: IP10 Output parameters Voltage: 3 × 0–500 V Frequency: 0–180 Hz Output current: 105 A (400 V) Apparent power: 73.5 kVA Recommended motor power: 55 kW Additional information Repairs performed at SEW EURODRIVE Werk Wien Repair No.: 14584 Repair performed: Week 24 of 2012 Final inspection: Week 24 of 2012 Condition Fpodszphcpepfx Aatel Device has been tested and is fully functional. Good visual condition, with normal signs of use. All connections and terminals are complete and consistent with the photos. The set for sale is exactly the one shown in the photos.

Condition: excellent (used), For sale: SEW-EURODRIVE MOVIDRIVE inverter, complete with a power module. Visual condition as shown in the photos. Technical data: Control unit: Manufacturer: SEW-EURODRIVE Model: MDX61B0550-503-4-00 Controller type: MDX61B-00 P/N: 08279691 Control unit P/N: 08243492 SO#: 01.1304473308.0001.09 Control unit SO#: 0189307 Protection class: IP00 Country of manufacture: Germany (Made in Germany) Power module: Model: MDX60A0550-503-4-00 Sach. Nr.: 8226636 Nr.: 0591425 Input power supply: 3×380–500 V AC ±10% 50–60 Hz ±5% 94.5 A AC (400 V) Operating temperature: 0…40°C Protection class: IP10 Output: 3×0 V 0–180 Hz 105 A AC (400 V) 73.5 kVA Lastart: M Installed communication modules: DFP21B DEH11B Additional markings: SEW Werk Wien service sticker: Rep. No.: 12424 Repair: 12/2011 Final inspection: 42/2011 Fpjdpfxezphcce Aatjl Weight: 32.75 kg Condition: Visually in good condition. The housing has a crack (visible in the photos). Normal signs of use, minor scratches, and scuffs are visible. Sold exactly as shown in the photos.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, total width: 2,100 mm, total height: 2,500 mm, total length: 6,000 mm, type of input current: three-phase, input voltage: 380 V, overall weight: 5,000 kg, power: 11 kW (14.96 HP), input frequency: 50 Hz, In working condidion, el motor is replaced with the smaller one for efficiency Fsdpfxezi A Iyo Aatspl

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos Fpsdpfx Aeg Si Npoatol -Clamping devices: see photos -Dimensions total: 400/500/H190 mm -Weight: 87 kg

Condition: used, CNC oxy-fuel cutting system BACH, type ACW 2500 Oxy-fuel cutting machine with CNC control NBS 400 Machine no. 14 561-06, year of manufacture 2006 Cutting area: 2500 x 6500 mm Travel length: 8000 mm Track gauge: 3345 mm Fedpfx Aaef Ncadjtopl Height of travel: 650 mm 2x machine cutting torches with cutting table (2-part)

Condition: excellent (used), Year of construction: 1995, Equipment: documentation/manual, FOR SALE: CNC LATHE GILDEMEISTER CTX400 Fedpfx Asy Rbr Neatepl TECHNICAL AND VISUAL CONDITION: Very good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX400 Control: Heidenhain 1190 Country of origin: Germany Year of manufacture: 1995 Machine specifications: - Turret: 12 tool stations, VDI-30 tool holders - Max. spindle speed: 5000 rpm - Hydraulic tailstock - Parts catcher - Max. turning diameter X-axis: 290 mm - Max. turning length Z-axis: 600 mm - Coolant system - Three-jaw hydraulic chuck 200 mm - Spindle bore: 66 mm - Through-spindle - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5.5 tons - Loading onto truck included in the price The machine has undergone a full technical inspection. 100% operational. Connected and ready for work. Stal-Com has been selling, servicing, and providing training on CNC machines from the DMG group for 17 years. We specialize in all models of Gildemeister lathes as well as Deckel Maho machining centers. All machines undergo a thorough technical inspection. Besides Polish customers, our machines are purchased by clients throughout Europe and parts of Asia. Each machine can be inspected under power during production, as we also provide machining services. After purchasing a machine from us, we offer operator training and can help set up part production at the customer's site. We work with numerous companies on a long-term basis, supplying them with further machine tools.

Condition: new, Year of construction: 2024, operating hours: 10 h, functionality: fully functional, For sale: EWM Tetrix XQ 400 Puls AC/DC W Expert welding machine including accessories (TIG Speed continuous drive 45 coldwire wire feeder/ABITIG 500W MT 4m torch/others). The system was purchased as an add-on for a BOKI linear welding automaton, intended for longitudinal welding of aluminium tubes/sheets. Welding was successful; however, the project was ultimately not realized. The equipment has run for approx. 20 hours = like new condition. Original price: CZK 354,800. Fedsy Hpamjpfx Aatjpl

Condition: used, Travel ranges: x 400 mm y 375 mm z 250 mm Table size 200 x 800 mm Fpsdpezzxfrofx Aatel Spindle speeds 50 - 3150 rpm Tool holder SK 40 Spindle quill travel 50.0 mm Rapid traverse rate 2.4 / 1.6 m/min Control system: Philips Dimensions L-W-H 1860 x 1790 x 1750 mm

Condition: used, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Gildemeister lathe Color: Pink Rose 3 axes X, Z, C Type: CTX 400 Series 2 CNC Heidenhain With conveyor With driven tooling Fodpfxsy A Imqo Aatepl With documentation

Condition: good (used), Year of construction: 2008, total length: 4,520 mm, total width: 1,670 mm, plate height: 400 mm, Manufacturer: STOLLE Type: DT-45 Fedpfjwp D Nnjx Aatepl Specifications Metric US Standard Length 4520 mm Width 1670 mm Height 400 mm Number of T-slots 6 T-slot pitch / spacing 290 mm T-slot size 36 mm Number of matching pieces 1 Dimensions (estimated) Length 4520 mm Width 1670 mm Height 400 mm Weight 5600 kg Please note: The information on this page has been compiled by us to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent any representations or contractual conditions. We recommend you verify all important details.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: X2S174, turning diameter over cross slide: 246 mm, turning length: 1,200 mm, spindle speed (max.): 2,700 rpm, turning diameter over bed slide: 400 mm, controller model: Fanuc 0i-TF Plus, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 400 mm Swinging diameter over cross slide: 246 mm Swinging diameter in the steady rest area: 585 mm Spindle speed range: 1–2,700 rpm Distance between centers: 1,200 mm Spindle bore: 55 mm / 80 mm Spindle nose: D1-6 Camlock Chuck size: 250 mm Fjdpfx Aaozgt Urstopl Axes: X, Z MACHINE DETAILS Control model: Fanuc 0i-TF Plus Main motor power: 7.5 kW Machine weight: approx. 2,200–2,500 kg EQUIPMENT Coolant system Manual tailstock Automatic lubrication of guideways and ball screws

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H315 mm -Weight: 111 kg Fpsdpfxeg R Tfuo Aatjl

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm Fodpfx Aajg Si Ntjtepl -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H320 mm -Weight: 121 kg

Condition: used, overall weight: 221 kg, total length: 400 mm, total width: 400 mm, total height: 540 mm, Cross tooling column with Gressel Mounting holes 4 Pitch fixing holes 320 mm Length 400 mm Width 400 mm Height 540 mm Fodpfxoywy U Ne Aatspl Weight 221 kg If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1991, Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Novenco, dust extraction fan radial fan type CNA-400 REX / AZG-S -Engine: 1.35 kW 955 rpm Fpedpfx Aetz Hu Ioatsl -Volume flow: 5000 m³/h -Connection: inlet Ø 400 mm -Connection: Output 390 x 280 mm -Dimensions: 1030/590/H800mm -Weight: 70 kg

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 470 mm, turning length: 600 mm, turning diameter: 570 mm, spindle bore: 79 mm, Error message: Actuator not operational Fpedpfex Sw Uvjx Aatsl lots of accessories

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 35001032, turning length: 40,000 mm, turning diameter: 890 mm, spindle motor power: 69,000 W, spindle speed (min.): 1 rpm, spindle speed (max.): 1,800 rpm, spindle bore: 122 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 260 mm, type of input current: three-phase, quill stroke: 140 mm, quill diameter: 120 mm, quill travel distance: 3,958 mm, spindle nose: A15, overall weight: 25,500 kg, spindle diameter: 200 mm, feed force X-axis: 10,000 N, feed force Z-axis: 22,000 N, distance between centers: 4,000 mm, Equipment: documentation/manual, For sale is a Heyligenstaedt Heynuflex turning and milling center, which is currently still in production. The machine is in operational condition and can be inspected under power and in operation until September 14, 2026. Machine type: Hn35U/4000 Flex Commission number: 35001032 Year of manufacture: 1994 Working area: - Turning length: 4000 mm - Swing diameter over bed: 890 mm Main drive: - Power at 100% duty cycle: 50 kW - Power at 50% duty cycle: 69 kW Main spindle: - Spindle diameter at the front bearing: 200 mm - Spindle bore: 120 mm - Spindle head shape: Shape A DIN55026 Gr15 - Speed range: - Gear stage 1: 1 – 540 rpm - Gear stage 2: 7 – 1800 rpm Feed: - Rapid traverse speed max.: 15 m/min - Planar feed: 0.5 - 5000 mm/min - Longitudinal feed: 0.5 - 5000 mm/min Tool carrier system: - Tool interface: Capto C8 - Linear travel range Y-axis: +/- 130 mm - Linear travel range X-axis: 980 mm - Tool magazine: 36 tools Tailstock: - Quill diameter/stroke: 125 mm / 140 mm - Axial force min/max: 16000/2500 N - Internal taper quill: MK 5 Control system: - Type: Siemens 880T Fpedpfx Aszwb Dpjatel If you are interested or would like to arrange a viewing appointment, please do not hesitate to contact us.

Condition: used, Year of construction: 2000, O F F E R We can offer you, without obligation and subject to prior sale and errors, the following ex stock: H U G O – B E C K Flow Wrapping Machine Type FLEXO 400 Year of manufacture: approx. 2000 Serial no. 12131 _____ Working height: 850 mm Product dimensions: 55-400 mm width 2-150 mm height 80-unlimited mm length Max. output: 20 m/min 60 cycles/min Machine length: 2000 mm Machine width: 1450 mm Connected load: 3 kW Packaging films: PP, PE, Polyolefin Weight: 650 kg Machine dimensions: 2,140 x 1,450 mm Accessories / Special equipment: • Cross-sealing unit with permanently heated profile sealing element for long service life and secure seals • Side sealing unit, mechanically controlled, permanently heated sealing element for stable seals • Extremely short changeover times without tools • User-friendly control elements • Compact footprint We would also like to point out that, if interested, we have similar packaging machines in stock on site! Condition : Very good Please click here shortly for a video of the machine: Fedpfxowugmtj Aatopl Delivery : Ex stock - as inspected Payment : Net - after receipt of invoice

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: MIKRON, milling machine table T-slot table from CNC machining center type VC500D -Table surface: 400 x 900 mm -T slots: Slot width 18 mm, slot spacing 125 mm -Transport dimensions: 400/900/H175 mm -Weight: 288 kg Fpodpoy H Itrofx Aatol

Condition: used, Year of construction: 1960, functionality: fully functional, machine/vehicle number: 3183, Parameters: Swing over bed: 4000 mm Distance between lathe tips: 30,000 mm Fpedpfx Aajwqlc Ejtel Speed: 0.5-80 rpm Workpiece weight: 160 t Control system: CNC SIEMENS SINUMERIK 840 D

Condition: ready for operation (used), Year of construction: 2011, operating hours: 40,535 h, clamping force: 5,000 kN, screw diameter: 100 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, Hydraulic injection moulding machine manufactured in 2011. This Krauss Maffei 500-4000 CX features a clamping force of 500 t and a screw diameter of Ø 100 mm. It offers a maximum mould opening of 1530 mm and tie bar spacing of 900 × 800 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 500-4000 CX machine we have for sale. Contact us for further details. • PP injection capacity: 1.5 kg • Minimum mould dimensions: 480 mm • Tie bar spacing: 900 x 800 mm Fodpfxoy Tk The Aatopl • Maximum mould opening: 1530 mm • Working hours: 40,535 h

Condition: used, XK400×1000 Rubber & Plastic Mixing Mill – High-Performance Two-Roll Mill Manufacturer: Wuxi Double Elephant Rubber & Plastics Machinery Co., Ltd. Model: XK400×1000 Main Technical Data: Roll diameter: 400 mm Working length: 1000 mm Front roll speed: 14.85 m/min Rear roll speed: 18.85 m/min Speed ratio: 1 : 1.27 Max roll gap: 10 mm Batch capacity: 25–35 kg Motor power: 37 kW (Siemens IE3 motor) Control system: Siemens S7-300 PLC with Profibus Length: 4400 mm Width: 1710 mm Height: 1850 mm Weight: ~8500 kg Description: Fjdpfx Aasxrc Eqetepl The XK400×1000 Mixing Mill is a heavy-duty two-roll open mill designed for rubber and plastic compound mixing, warming, and sheeting. Built with precision alloy rolls, Siemens electrical control, and a robust gear transmission system, this machine ensures stable, low-noise operation, high efficiency, and long service life — perfect for industrial rubber production, laboratories, and plastic processing plants. Key Features: Alloy chilled cast iron rolls – HS70±2 hardness for long life Water-cooled drilled rolls with rotary joints for temperature control Low-noise gear drive with hardened gears Motorized roll gap adjustment (0.5–10 mm) Forced thin-oil lubrication system 4 emergency stop buttons for operator safety Premium Siemens control & electrical components Applications: Rubber compounding and mixing Sheet forming for rubber and plastics Hose, seal, and belt production

Condition: used, Year of construction: 2008, control Siemens 840D powerline swing diameter 640 mm turning diameter 640 mm spindle distance 1.930 mm x1 axis 550 mm y1-axis 220 mm z1 axis 1585 mm b-axis 240 ° x2-axis 225 mm z2-axis 1.400 mm z3-axis 1.500 mm chuck diameter 250 - 400 mm bar material dia. 90 mm spindle head 220 h5 spindle bore diameter 107 mm diameter in the front bearing 150 mm chuck diameter 400 mm bar material dia. 90 mm spindle head 220 h5 spindle bore diameter 107 mm diameter in the front bearing 150 mm turning speeds 3.200/4.000 U/min tool taper HSK63-A spindle tunring speed 12.000 U/min drive capacity - main spindle 100/40% ED 13,2/22 kW Torque (100% ED / 40% ED) 60/100 Nm bearing diameter 80/55 mm Number of working hours ca. 96.571 h spindle hours ca. 43.720 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Fjdpezupqrjfx Aatspl Subject to change, errors in technical data and specifications, and prior sale.

Condition: excellent (used), Year of construction: 2017, CNC Lathe Okuma LB 4000 EX II – M C750 Control: OSP-P300LA Year of manufacture: 2017 Internal machine no.: 22 Turning length: 750 mm Turning diameter: 430 mm Swing diameter over bed: Ø 670 mm Swing diameter over carriage: Ø 480 mm Spindle speed: 42 – 4,200 rpm Tool turret: V12 (all stations driven) Equipment: Chip conveyor Fedpfsyk Uimox Aatspl Touch setter OneTouch IGF 3-jaw chuck Tailstock

Condition: used, Year of construction: 2012, functionality: fully functional, total width: 1,370 mm, total length: 2,950 mm, total height: 1,800 mm, We offer this used Profi Packer SCV 400 film wrapping machine, manufactured in 2012. Fodpfxozvdadj Aatepl Manufacturer: Profi Packer Model: SCV 400 Year of manufacture: 2012 Condition: used Category ID: 1262 Type ID: 907 Machine type: Film wrapping machine Machine dimensions (L x W x H): 2,950 x 1,370 x 1,800 mm Cycle rate per minute: approx. 65 cycles Film thickness: 7 to 80 μm Includes infeed conveyor and hot air tunnel for heat sealing. If you have any questions or require further information, please feel free to send us a message or call us.