Used Kleingebindewannen Kl for sale (3,760)

Condition: as good as new (ex-display), Year of construction: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blades: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (15 - 40 mm) Suction nozzle Ø 160 mm Dksdpogmfa Aefx Afpeh Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment base + € 3,750 net (prevents blocking of the pusher. Recommended for shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) +1,980 € net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We are happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: used, Used large-volume container, also known as a pallet box, made from recycled polypropylene (RPP), stackable and equipped with four swivel casters and a flap on the long side. Two of the four swivel casters are equipped with brakes. The container has a maximum load capacity of 500 kg and a capacity of 540 liters. Dsdpfxjx Hugxs Afpekh The container can

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Dodjxf Utajpfx Afpjkh Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Year of construction: 1998, condition: good (used), GAMMERLER-Compensating-Stacker, completely rebuilt, very good condition Dkedpfxsb Hxpge Afpsh from 4 to 96 (128) pages Size: 500 mm x 330 mm Max. mechanical Speed: 80.000 sig./h Max. pile-height 300 mm respectively 400 mm

Condition: ready for operation (used), VTL MORANDO KL 12 CNC Fagor 8040 Dedpfxotvv Sqs Afpjkh Faceplate diameter: 1200 mm Swing diameter: 1400 mm Turning height: 1080 mm Main motor: 40 kW Total power requirement: 50 kW Weight of the machine ca.: 18 t Movie underpower available

Condition: excellent (used), This spot tacking machine is used for several operations in the ladie´s and men´s outer wear industry: Woven labels can be tacked as well as turned-under hems or edges and turned-up trouser bottoms. It´s durable blind spot tacks do not leave any marks on the outside of the garment. Due to optional equpment this machine can get converted for other applications. Dksdpfov Ty Hlex Afpsh

Condition: good (used), Year of construction: 1988, Description: Heavy-duty, high-precision horizontal lathe with Rohm hydraulic clamping system, slide with two working positions, Sauter 4-position tool turret, circular turning unit, CNC 6 axes, tailstock, chip conveyor. Suitable for both high-volume material removal and high-precision turning. Machine modified with a 2000 mm face clamping plate and increased in size. Djdpfexmb Adex Afpjkh Year of production: 1988 Made in: Germany Turning diameter over bed: 2500 mm Turning diameter over telescopic covers: 2200 mm Turning diameter over slide: 1400 mm Turning length: 6000 mm Three-jaw chuck table: 2000 mm Spindle bore: 200 mm Attachment for circular turning Workpiece weight: 4,500–40,000 kg Turret head: 4 positions Spindle speed range: 4 – 400 rpm Main motor Siemens 95.5 kW Maximum torque: 40,000 Nm Overall power requirement: 125 kW Control: CNC SIEMENS 8T, 6 controlled axes Machine weight: 43,000 kg Required space: 13,000 x 4,000 mm

Condition: excellent (used), Saw Machine Haffner KL-176 Dodpfx Afefk I U Rjpekh

Condition: good (used), Year of construction: 2002, functionality: limited functionality, total length: 2,200 mm, total height: 1,600 mm, we offer as pictured!!! KEMPER bread roll line QUDRO KL 5-REIHIG Item is used and incomplete (covering missing; conveyor belts missing) Dedpfsr Ezuhsx Afpjkh Length approx. 220 cm / height approx. 160 cm Year of construction: 2002 Manufacturer: KEMPER further information: see photos We offer the opportunity to view the machine on Tuesdays and Thursdays between 9 am and 4 pm by telephone appointment. If required, the item can be taken away immediately. All offers ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. More used gastro technology in stock!!! all dimensions are approximate

Condition: good (used), Year of construction: 1985, functionality: fully functional, Pocket – knife folding machine (cross fold machine) MBO – working width till 52 cm, year of manufacturing 1985, good condition, modell K 54/4 KL. Technical description: Maximal format: 52 x 80 cm. High pile feeder with automatic sheet separation head at the back of the pile. Counter. 4 folding pockets. 1 folding knife perpendicular to the folding pockets. Mobile chute delivery for the full working width of the machine - till 52 cm. Year of manufacturing: 1985. Good condition. Dkedpfjrrw Rkox Afpoh Possibility of inspection that machine.

Condition: used, Punching force: 300 kN For example, punch a 20 mm hole in 12 mm steel Stroke triggering via foot switch Dksdpfx Ajxcndyjfpoh Assortment of tools is included in the price

Condition: used, Punching force: 350 kN For example, punch a 23 mm hole in 12 mm steel Djdpfx Aoxcnccsfpskh Stroke triggering via foot switch Support table with folding cams Assortment of tools is included in the price

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Dedpfx Afsh Nrh Uspokh Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 140092, Here we offer a KUKA KL 1500/2 linear unit year of manufacture 2006 Dedpfx Aot Sk A Dsfpekh This linear unit is intended for KRC 2 robots - KR 210. Total length: 4,90m

Condition: used, Year of construction: 1979, Motorized high-performance hole punch MUBEA KL 30 Punching capacity 30 t Hole diameter, steel 45 30 in 8 mm or 20 in 12 mm Throat 210 mm Machine dimensions L x W x H approx. 800 x 600 x 1400 mm Weight 330 kg Dksdpfov N Hrtsx Afpoh • Mechanical foot release via cable pull • Hand finder • Adjustable hold-down device Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, functionality: fully functional, infeed width: 740 mm, Folding machine MBO K 74/4 KL with flat pile feeder. Paper size: min15x25cm to max. 74x112cm speed: 30-150 m/min with belt delivery and compressor. In function, can be tested. Folding rollers renewed in 2017. Dkedpfx Ajtvfqwjfpjh

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: L705226, TECHNICAL DATA Manufacturer: Baron Max Model: KL-2680 Year: 2007 Serial Number: L705226 Control Unit: Fagor 8055TC WORKING CAPACITY Swing over bed: 670 mm. Center height to bed: 335 mm. Center height to top cross slide: 205 mm. Swing over cross slide: 400 mm. Dis. Between centers: 2100 mm. Width of bed: 450 mm. HEADSTOCK Spindle nose: A1-11 Spindle bore: 305 mm. Bar capacity: Ø 105 mm. Range of spindle speeds: 3 rang Gears Auto Shifting Spindle speeds range: H: 1500-331 rpm M: 330-93 rpm L: 92-24 rpm Taper in spindle: MT#6 SADDLE Longitudinal travel (Z-axis): 2000 mm. Cross-slider travel: 450 mm. Size of tool holder: Boring Tool: Ø 40 mm. O.D. Tool & Facing Tool: 25 mm. Ball screw (Dia x pitch): X-Axis: Ø25 mm. x P 5 mm. Z-Axis: Ø50 mm. x P 10 mm. TAIL STOCK Quill diameter: Ø105 mm. Quill travel: 220 mm. Quill taper: MT#5 ENGINE Spindle motor: 20HP Z-axis drive motor: 12 Nm. (FKM 44.3) X-axis drive motor: 6.3 Nm (FKM 42.3) Coolant pump motor: 1/4 HP X, Z-AXES FEED X axis rapid travel: 6 M/min. Z axis rapid travel: 8 M/min. GENERAL Power Required: 20 KVA. Floor space (L x M x H): 4090x1950x1820 mm. Approx, machine weight: 4700 Kgs. EQUIPMENT Coolant system Manual 4-way tool post 4 Jaws Self-centering scrolling chuck Ø 12". Dkodpfsvai Swjx Afpoh Steady rest

Condition: used, mileage: 43,050 km, power: 81 kW (110.13 HP), first registration: 07/2021, fuel type: diesel, overall weight: 2,800 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,904 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,200 mm, loading space width: 1,550 mm, loading space height: 1,250 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle no.: 2314 ----Why autonext GmbH? One of the largest commercial vehicle showrooms nationwide. Always over 400 vehicles immediately available at the best prices – the largest selection. More than 1,000 satisfied customers per year – top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent condition! 1st owner, German vehicle, non-smoking vehicle Full service history exclusively at Volkswagen New VW inspection / Next service in 503 days or 33,200 km Near-new front brakes Body: Refrigerated box van for fresh goods Konvekta cooling unit SET-Line FK 2000 F Multi-Function Display Plus Comfort Package Plus Climatic air conditioning Park Pilot System (rear parking sensors) Upon request: Tow bar retrofit available for only €599, and, if possible, increase of towing capacity up to 3.5t ---- Special equipment: * Audio navigation system Discover Media Streaming & Internet (touchscreen, USB) * Voice control system * Multimedia interface with 2 x USB (Type C) in front * Mobile online services App-Connect wired and wireless * Equipment package: Comfort Package Plus * Grab handles A-pillars * Climatic air conditioning (driver’s cab) * Seat trim/upholstery: 'Bricks' fabric * Seats in driver’s cab: height-adjustable driver’s seat * Seats in driver’s cab: lumbar support for driver’s seat * Interior lighting in driver’s cab: front reading lights * Illuminated glove compartment * Sun visors with mirrors * Power outlets (12V sockets) in driver’s cab (2 units) * Waste bin * Multi-Function Display Plus * Driver assistance system: fatigue detection sensor * Preparation for cargo area refrigeration * Vehicle without lashing eyes * Vehicle without child safety lock in load/passenger compartment * Electrical interface for external use (CAN bus) with terminal * Partition wall in load compartment, high without window * Roof lining "Himmel Komfort" in driver’s cab * Climatic air conditioning (driver’s cab) * Double passenger seat with lockable storage box in the seat bench * Illuminated glove compartment * Driver assistance system: rear parking aid * Rear wing doors without glazing * Truck registration * Emergency call system * "Transporter" badge on fender Standard equipment: Electronic Stability Program (ESP) with brake assist, ASR/ABS, EDS and hill start assist, driver assistance system: hill start assist, deactivatable passenger airbag, driver/passenger airbags, anti-lock braking system (ABS), traction control (ASR), drive type: front-wheel drive, electrically adjustable and heated exterior mirrors, left convex exterior mirror, right convex exterior mirror, rubber flooring in cab, on-board tools, driver assistance system: brake assist (HBA), driver assistance system: multi-collision brake, driver assistance system: cross wind assist, electric windows, laminated safety glass windscreen, 2 folding radio keys, 5-speed transmission, lockable glove compartment, LED lighting in load/passenger compartment, interior pollen filter, body/superstructure: standard box, body variant: standard roof, fuel tank: 70 liters, radiator grille with chrome trim, adjustable steering column, engine 2.0L – 81 kW TDI, rear fog lamp, non-smoker package, digital radio (DAB+), wheelbase 3,000 mm, tire repair kit, diesel particulate filter, low emissions according to Euro 6d-TEMP standard, sliding door load/passenger area right, electro-mechanical power steering, Start/Stop system... Dkodpfexglinsx Afpoh

Condition: new, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 2578, - Type: TLH-B-K5-800 Dedsvu Umcepfx Afpjkh - Excavator weight class: 12.0 t - 16.0 t - Cutting width: 800 mm - Weight: 458 kg - Volume 0.411 m³ - Adapter: MS21

Condition: good (used), spindle speed (max.): 9,600 rpm, spindle speed (min.): 200 rpm, – MK3 – 200–9600 rpm – Right- and left-hand rotation – Thread cutting function Dkjdpfxoxq Rwfj Afpsh – Throat depth 120 mm – Steplessly adjustable speed – Thread cutting function – Protective cover – Emergency stop switch – 40V

Year of construction: 2013, condition: excellent (used), Punching force 80 kN working stroke 40 mm installation height 140 mm Dkodpfx Afjlmk Uyspoh throat 110 mm Working pressure 10 bar Space requirement L x W x H 0.9 x 0.9 x 1.4 m Weight 250 kg Operating instructions

Condition: good (used), 1 x Immersion washing machine Moc KL 60 S Year of construction: 1989 holder 610 x 440 mm with trigger Dkedpjrzt E Dofx Afpeh

Condition: good (used), Size: max 500 x 330 mm min 140 x 150 mm Product thickness: side 4-96 Seiten Speed: max 100.000 Ex./h Pile height 300 mm Infeed height 500-1920 mm Delivery height 890 mm Power requirements 2 kW (220/380V, 50Hz) Length 3077 mm Dkjdpjg Du Aujfx Afpoh Width 894 mm Height 1835 mm Weight 960 kg (approx.)

Year of construction: 1997, condition: used, Built in 1997 Size max 660 x 1.020 mm Equipment feeder: Djdpfxodmdt Uo Afpekh • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife • polyurethane-steel folding rollers delivery: • belt delivery

Condition: good (used), Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: Dsdel Dpc Eepfx Afpjkh • cross fold knife 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56