Used Kolbus for sale (105)

Condition: used, Card and Product Sample Adhesive Kolbus KI 224 ZU Karten- und Warenprobenkleber - Card and Product Sample Adhesive Kolbus KI 224 ZU Baujahr / Year 2003 - Serial-No. 356009 For cards, envelopes, bags and booklets of the following formats: Für Karten, Umschläge, Taschen und Hefte in folgenden Formaten: Format / Size min. 40 x 60mm - max. 220 x 350mm Geschwindigkeit / Mech.Output 18.000 Ex/h (depending on type, size and  properties of base and product up to) Heißleim Schmelzgerät / Hot Glue (commercial products) Nordon 3100V-3EA Aufbau, zum Anbau an der Zusammentragmaschine, Design / compat appliance for attachment to a collating machine Antrieb über Zahnriemen von der Hauptwelle zur ZU 840 / Drive toothed belt from main shaft to ZU 840 Steuerung: Elektronische, interaktive Mikroprozessor-basierte Steuerung mit Einstellung von Vorlaufzeit und Leimstreifenlänge /  Bsdpfx Acs Agpzkezeww Control: micro-processor based control unit with adjustment of lead-time and length of the glue  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2015, Three knife trimmer Kolbus HD 143.P Year: 2015 For three side trimming of book blocks and brochures, used as an individual machine or as a unit within book production lines. Cycles: 12,9 mio Description: - Co-Pilot with touchscreen - Right hand infeed Bwodszx S Rijpfx Aczow - Counter stacker - Cut counter - Exchangeable cutting tables (standard set): (4-18) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2 Max. mechanical speed: up to 4.200 cuts/h Maximum size (uncutted): 450 x 320 x 80 mm Maximum size (cutted): 420 x 305 x 80 mm Minimum size (cutted): 100 x 100 x 2 mm Maximum pile height: 80 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 285, KOLBUS PE 0 – Hot Foil Stamping and Embossing Machine for Hardcover Covers Identification Data • Manufacturer: Kolbus GmbH & Co. KG, Germany • Type: PE 0 • Serial number: 285 • Year of manufacture: 1984 Purpose and Technology • Purpose: Hot foil stamping and embossing on hardcover book covers • Operating principle: Flat press head – the cover is fed onto the working table, while the upper head performs the stamping • Capabilities: Hot foil stamping and blind stamping/embossing, depending on the installed tooling Bjdpfx Acoz A A Azozjww • Foils: Gold, silver, pigment, and other hot-foil materials • Operating temperature: Approximately 130–170 °C, according to the markings on the machine, depending on the foil and application Construction and Equipment • Infeed and outfeed tables with conveyors on both sides of the press head • Automated cover feeding and transport • Belt drive with drive motor • Protective covers over the drive components • Control panel with buttons and selectors • Cycle counter • Safety devices and emergency stop buttons • Large flywheel – mechanical press operating principle • Mobile design for relocation within the production area Format and Productivity – Estimated • Format: Suitable for A5 and A4 size covers • Productivity: Approximately 1,000–2,000 impressions/hour • Productivity depends on: Format, type of foil, number of impressions per cover, impression length, and operating method Price: €14,000.00

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 123, We are selling a fully functional Kolbus DA260 casemaking machine. The machine has approximately 12 million cycles. It comes with a CD containing the software. Testing of the machine in production is possible by arrangement. Bwodpfjyw Tc Tex Aczsw

Condition: used, Year of construction: 2010, Gathering element(s) Kolbus ZU 832.A Year: 2010 Description: Bsdpfx Acjzhvn Rjzeww - Number of elements: 1 - Number of gathering stations: 3 - ATC thickness control - Optical sheet control: Signalynx Maximum size: 460 x 320 mm Minimum size: 105 x 105 mm Max. mechanical speed: up to 8.000 cycles/h

Condition: used, Year of construction: 1982, Format: 0x0 Equipment: Corner cutter, manual Bodpjx Rh Dxsfx Aczeww

Year of construction: 1999, condition: used, Embossing machine Kolbus PE 312 Year: 1999 - Case pre-stacking conveyor - Feeder for cases Bedpfxezvd U Ij Aczjww - Case bending station: DBA - Foil transporting device - Case set up outside machine - Matrix plate 2 - Counter stacker

Condition: like new (used), Year of construction: 2019, operating hours: 2 h, functionality: fully functional, machine/vehicle number: 34, Kolbus Casemaker, complete with pallet feeder type PPA290 Case – size range opened case (width x height) min. 300 x 210 mm, max. 1050 x 735 mm Cloth (width x height) min. 765 x 200 mm, min. 1080 x 290 mm Boards Thickness min. 1 mm, max. 4 mm Mechanical speed: Up to 40 cycles/min Board in-feed, Stiff spine in-feed, Flexible spine in-feed from roll, In-feed cloth, glue tank, glue rollers, pressing device, delivery belt Machine no: 34, Books produced: 2 million Bwjdownqtkspfx Aczsw

Condition: excellent (used), Year of construction: 2019, Kolbus AutoBox AB year 2019 machine for box production easy operation servo controlled quick job change suitable for corrugated boxes enables box-on-demand production Bodpfx Acsx El N Ijzeww MC MultiCut Module PR module many box types (FEFCO) scoring, cross and linear cutting, slitting incl. several equipment (glue, new knives) delivery section ready for use good condition available immediately

Condition: used, Year of construction: 2009, Palletiser Kolbus PL 771 Year: 2009 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor - Turning device - Stacking robot Bsdpfx Acszcuz Hjzoww - Air table - Pallet dispenser - Slip sheet feeder - Pallet delivery station Technical specifications: - Infeed speed: up to 30 piles/min - Stack size max.: 563 x 406 x 350 mm - Stack size min.: 150 x 100 x 25 mm - Pallet size max.: 1.340 x 1.000 mm - Pallet size min.: 1.000 x 800 mm - Loading size min.: 900 x 700 mm - Palletizing height max.: 1.600 mm incl. pallet - Loading capacity max.: 1.500 kg/pallet

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station Bodpfx Aoxuad Aeczoww - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011 Description updated: 9-4-2026

Year of construction: 2014, condition: used, Conveyor Kolbus TS.L Year: 2014 Description: - Transport system, length (approx): 80 cm - Book turning decive Bwsdpjyt Dzwjfx Aczew

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: KS 842, KOLBUS KS – Machine for Cutting Bookbinding Materials Manufacturer: KOLBUS (Germany) Model: KS (Cardboard and Narrow Slitting Machine) Year of manufacture: 1975 Purpose: Precision longitudinal and cross-cutting of covering materials from rolls or sheets (calico, bookbinding cloth, imitation leather, Balacron, gauze, PVC). Technical specifications: • Maximum roll width: 1,400 mm • Cutting width (longitudinal cut): minimum 50 mm to maximum 1,400 mm • Cutting length (cross-cut): minimum 10 mm to maximum 1,050 mm • Cutting system: Shaft with circular knives for longitudinal cutting + guillotine knife for cross-cutting • Speed: 14–36 strokes (cuts) per minute Bwjdpsz A A Hgjfx Aczew The machine is well maintained, fully functional, and ready for operation. Price: €4,500.00

Condition: used, Year of construction: 2011, Case maker Kolbus DA 260 Year: 2011 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic case counter Bwsdpewdgfzofx Aczsw - Board magazin for manual loading - Board cutter: PS - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 104 mm Max. mechanical speed: Up to 40 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2024, Cloth cutter Kolbus: KS 601 Year: 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Standard equipment: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Material width: Max 1.600 mm Bwedpfx Aovqbhleczsw Maximum cutting width: 1524 mm Minimum cutting width: 50 mm Maximum length of cut: max. 1.100 mm (for length and cross cutting) Minimum length of cut: 100 mm Material roll diameter: 500 mm Max. mechanical speed: 50 cuts/min Net performance depends on material, format, ... Note!: Technical specifications are subject to typing errors, as well as format or design modifications in comparable models from the manufacturer.

Condition: used, Year of construction: 2015, Front cutter Kolbus FA 650 Year: 2015 Bwjdjyzm T Tjpfx Aczow Description: - TFT Touch screen - Opening by suction belts - Cutting unit - Knife pre-setting device - Throughfeed Max. mechanical speed: 4.000 cycles/h Maximum size (uncutted): 480 x 375 x 50 mm Minimum size (uncutted): 125 x 105 x 3 mm Maximum size (cutted): 480 x 350 x 50 mm Minimum size (cutted): 125 x 100 x 3 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2005, PUR + EVA Hotmelt spine glue unit Bwedpfx Aszat E Soczjw Kolbus Year 2005 Roller system With mode selector switch (PUR or EVA-Hotmelt) Compatibel with: KOLBUS KM 473 perfect binder

Condition: used, Year of construction: 2005, PUR + EVA Hotmelt spine glue unit Bwodpfezat Hiex Aczew Kolbus Year 2005 Roller system With mode selector switch (PUR or EVA-Hotmelt) Compatibel with: KOLBUS KM 473 perfect binder

Condition: good (used), Kolbus VDB Cover bender Bedpfjz Rk Rdex Aczeww This machine is in very good condition and ready to use. Manufactured by Kolbus, Germany. The pressure rollers feature smooth adjustment of the gap and cover straightening power. The entire unit is mounted on a convenient base with wheels. Working width: 750 mm Power supply: 380V Weight: 150 kg

Year of construction: 2004, condition: used, Conveyor Kolbus XTN 640 Year: 2004 Description: Bwsdszdc E Nspfx Aczsw - Conveyor (90° to the left)

Condition: used, Year of construction: 2004, Case maker Kolbus DA 270 Year: 2004 Description: - Digital display - Board pre stacking conveyor - Board cutter: PS - Centre strip infeed (stiff) - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Preheated glue tube - Viscosity control - Device for producing padded cases - Pressing station Bsdpfx Aceyym Ubszsww - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Max. mechanical speed: 65 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2005, Feeder(s) for gathering machine Bwedpfx Aceyzduujzjw Kolbus ZU 841.A Year: 2005 Description: - Number of feeders: 3 - Horizontal feeder(s) - ATC thickness control - Excluding pump Maximum size: 460 x 320 mm Minimum size: 105 x 105 mm Max. mechanical speed: up to 8.000 cycles/h Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2005, Feeder(s) for gathering machine Kolbus ZU 841.A Bwjdpfx Asyzdu Ieczow Year: 2005 Description: - Number of feeders: 3 - Horizontal feeder(s) - ATC thickness control - Excluding pump Maximum size: 460 x 320 mm Minimum size: 105 x 105 mm Max. mechanical speed: up to 8.000 cycles/h Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2005, condition: used, Intermediate Delivery Kolbus TS.Z Bedpfeyzdubex Aczeww year 2005 Configuration: incl. operating panel Technical specifications: length: 2.000 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Machine is in very good working condition. Still in production. Test possible at any time. Available immediately. Bwodpfjyux Sgjx Aczsw