Used Corrugated for sale (316)

Condition: ready for operation (used), Year of construction: 1995, operating hours: 1,00,000 h, functionality: fully functional, controller model: partially manual, total length: 65,000 mm, overall weight: 40,000 kg, input voltage: 4,000 V, type of input current: three-phase, Equipment: chip conveyor, corrugation cardboard line, C,B,E flute 1530mm units,the bobbin feet of the machine 4/3single 1 double ,glue transfer unit, heating tunel, side cutting and cut off unit, Included the gaz and air stations, glue preparing unit. all are parts of the production line. Dcsdewycrcopfx Afpec

Year of construction: 2014, condition: excellent (used), Offer for the Sale of a Used Technological Line for the Production of Corrugated Cardboard 1. Subject of the Offer A technological line for the production of corrugated cardboard, model WJ150-1600-3, and a cardboard drying line, model WJ150-1600/250m/min, manufactured by Techcut e.K. The machines are located in Poland and are currently in continuous operation. 2.Key Technical Data Model: WJ150-1600-3 Working width: 1600 mm Maximum speed: 250 m/min Flute types: B, C, E Optimal speed: 180-200 m/min (single wall) 100-140 m/min (double wall) The technological line includes the following components: Automatic Dry-End System Double-sided heating section: 15 heating plates x 600 mm Tension system: two sets of cotton belts Power: 31 kW Condition: very good Rotary Guillotine for Waste Rotational knives Power: 21 kW Condition: very good Cutting Knives (Single Spiral Knife) Power: 23 kW Weight: 11.2 tons Computer-controlled for precise cutting Bottom Layer Stacker Double stacker and output conveyor Power: 17 kW Steam System (Preheater) Moisture control for cardboard Power: 32 kW Waste Removal System Pressurized pipes to the shredder Waste Shredder Power: 15 kW Capacity: 1500 kg/h Knife System (Baler) Maximum pressure: 40 kN Power: 12 kW Cardboard Drying Line Includes: Single Facer (Flute B/C) Roller diameter: Ø360 mm Power: 19 kW Double Facer (Flute B/C) Roller diameter: Ø360 mm Power: 19 kW Slitter-Scorer (Longitudinal Cutter) Knives: 4, Scorers: 6 Minimum cutting width: 100 mm 3. Technical Condition The machines have been regularly serviced, are fully operational, and ready for immediate production. The technical condition is rated as "very good" under a restoration-based approach. Technical documentation and photos are available upon request. 4. Price New line price: Over €2,000,000 Used line price: €620,000 EXW, Poland 5. Benefits of the Purchase Attractive price compared to a new set. High-quality construction and reliable performance. Immediate production readiness. Dcedpfx Aevntdasfpsc If interested, please contact us. Technical documentation and details regarding transport and assembly are available upon request.

Condition: refurbished (used), Year of construction: 2014, number of ink cartridges: 4, color channels: 4, Durst P10-250 UV printer – refurbished Dedpfx Afoygxt Iopecc German-made printer Color: 4C – 10 pl, 1000 dpi Speed up to 245 m²/h Print width: 250 cm x 15 m Under Durst service maintenance 2 tables with markings - Corrugated option: suitable for cardboard as well includes software and accessories (Skies) - Dual registration Extra negotiable benefits: - Registration table for multi-plate/sheet printing - Heavy-duty roll option - Calder RIP station

Condition: used, Complete Corrugator width 2500: 3 single facer MITSUBISHI 50C (onda C,B,E) 7 Mill Roll Stand liner Martin Dedpfx Aeycgazefpecc 7 Splicer Liner Marquip 1 Mill Roll Stand liner Agnati year 2004 Gluer Peters year 1994 HOT PLATES Martin HI-Trac II Rotary Shear Agnati HRS 90 year 2003 Slitter Scorer Agnati Power Set year 2003 Cutt off Agnati TR/EL 90 year 2003 Stacker New Enginering

Condition: used, Machine type: Corrugated sheet profiling line – new CHIEF PHENIX type Dsdpfx Aow Dd Hpjfpscc Main components: - Coil lifting arm – 10-ton capacity - Decoiler – 10-ton capacity - Straightener – Dimeco - Feeder – Dimeco Microfeeder - Hydraulic punching press – SCMB 650 tons - Post-press feeder – Heilbronn - Roller conveyors - Rollforming line – 1000 mm, corrugated profile, CHIEF PHENIX new type Machine Application Automated production line for converting metal coils into corrugated sheets, including straightening, high-force hydraulic punching, continuous feeding, and rollforming. Suitable for structural and cladding applications. Key Features / Differences Modern system with high-performance units: 650-ton SCMB hydraulic press for precise punching, Dimeco straightener and Microfeeder for high throughput. 1000 mm rollforming line configured for optimized CHIEF PHENIX corrugated profile.

Condition: used, Year of construction: 2024, functionality: fully functional, Corrugated line 5 ply. Fully renewd 2024, 1650mm width. Steam matic, boiler steam producing 2500 kg/h. Max pressure 19 bar. Speed up to 70 metr per min. 1.⁠ ⁠Total Length: 55 metr 2.⁠ ⁠Total Power: 150 kw 3.⁠ ⁠Frame with shaft 4.⁠ ⁠Corrugated paperboard marching: diameter of corrugated rouer, electric adjust speed moter used. 5.⁠ ⁠Double cylinder gum mounting marchine: On the adoption, inside two layers draw the gun, dascend to carry the paper lead the paper roller. Machine exists units: Hydraulic shaftless mill roll stands, Spindle ¢ 240mm, hyperbolic heavy rocker, expand chuck , multi-point brake, hydraulic drive lifting, panning left and right on the middle. Top paper preheat cylinders and core paper preheat cylinders. Both preheat 360 degress area. Single Facer Double Facer Blade scorer NC helical knife Glue system Gas system Steam system producing 2500 kg/h. Max pressure 19 bar. Working 12 bar. Top paper index 100g/㎡--180g/㎡ Ring crush index（N.m/g）≥8 (Water containing8-10%) Core paper index 80g/㎡--160g/㎡ Ring crush index（N.m/g）≥5.5 (Water containing8-10%) Dsdpfjw R Sknox Afpecc In paper index 90g/㎡--160g/㎡ Ring crush index（N.m/g）≥6 (Water containing8-10%)

Condition: used, Year of construction: 1993, machine/vehicle number: 34247, FOR SALE: HSP Lasercomb 2900 Plotter Powerful and reliable HSP Lasercomb 2900 plotter – ideal for cutting, plotting, and prototyping tasks. Specifications: Working area: approx. 1800 x 2900 mm Power: 7.5 kVA Voltage: 3x400V Comes with a dedicated computer and plotting software. Dsdpfxew H D Huo Afpscc Condition: The machine powers on and runs, but requires some know-how or technical skills to operate it properly. Perfect for someone familiar with plotters or looking for a DIY challenge at a great price. Whether you're in packaging, design, or industrial production, this plotter is a solid investment for the right user.

Condition: excellent (used), Year of construction: 2015, operating hours: 3,590 h, functionality: fully functional, Equipment: documentation/manual, Corrugator-Shuttle system , ITIB MACHINERY INTERNATIONAL s.r.l. for producing Double wall corrugate pipe, HDPE and PP , with outside corrugated and inside smooth layer Description of the equipment • Model: Corrugator F700 - shuttle system Molds: 7 dimension of mold blocks . Each dimension include 9 pairs of molds. Die head: 7 die heads - Each dimension has its own die head Cooling mandrels : 7 pcs - Each dimension has one cooling mandrel for SN 8 Dcjdsv E Nwdopfx Afpsc

Year of construction: 2020, condition: new, Aluminum flat conveyor belt with substructure Working height 900mm, height adjustable using machine feet 2000mm flat Dimensions: approx. 2000 x 500 x 105mm Aluminum construction: Conveyor belt width with welded corrugated edge PVC conveyor belt with T cleats. Green conveyor belt, 2-ply, particularly cross-stable, endlessly welded with step connection * antistatic due to threads in the fabric of the running side Drive: motor approx. 0.18 kW, speed 0.4 m / sec. Dcodpfjgggklox Afpsc * controllable with frequency converter Connection 220 / 400V, 50Hz protection class IP54 Drive, motor control optional

Year of construction: 2017, condition: as good as new (ex-display), • Technical products + speed control Dsdsvzq R Rjpfx Afpscc • Suitable for pipes from 4.5 up to 25 mm OD

Condition: new, Year of construction: 2024, functionality: fully functional, For sale is a conveyor belt from Mass International, it can be equipped with a chute or with a separating roller etc., just ask or write. Feed : 600 mm ascending belt : 1300 mm Delivery : 500 mm NB: 330 mm GB: 405 Hmin: 700 mm Hmax. 1000 mm Belt speed : 6m/min Dcodpsgxud Usfx Afpec incl. corrugated edge

Year of construction: 2006, condition: ready for operation (used), Specification Detail Die cutting and stripping unit Max. Sheet Size 1050 x 750 mm Min. Sheet Size 450 x 370 mm Max. Die Cutting Area 1040 x 730 mm Max. Speed 7,500 sheets per hour Max. Pressure 250 tons Stock Range 100 gsm paper to 2000 gsm cardboard; up to 3 mm corrugated board Min. Gripper Margin 4 mm Dcedpfoyha N Hjx Afpsc Machine Weight 18,000 kg

Condition: good (used), Year of construction: 2001, functionality: fully functional, Stock laminating machine Type: 134R5-1500 P Dcedpoyhn Dfsfx Afpsc Year: 2001 Max. sheet size: 1420x1620 mm Min. sheet size: 500 x 500 mm Printing sheet: Paper from approx. 180 g/m² Cardboard from approx. 400 g/m² Carrier sheet: Corrugated board up to approx. 7.0 mm thickness Cardboard/solid board from 0.6 mm

Condition: excellent (used), Model: EM6-50MT Year of manufacture: 2008 Serial number: 58060 Dodpexqm Nkofx Afpscc Dimensions: 600 x 300 x 550 Corrugated cardboard cutting machine with cutting and winding tools, unwinder, work table, control cabinet, and operator terminal.

Condition: new, The KNWP 30 M is a reliable manual workshop press within the Workshop Presses category, ideal for various pressing tasks, including assembly, testing, and straightening workpieces. Made in Europe, this robust machine combines a rigid, machined weldment structure with a versatile hydraulic pump, which can be operated via both hand and foot controls. Its sophisticated two-step hydraulics allow for seamless transitions between quick-stroke and work stroke, while an automatic reset piston ensures efficient operation, adjustable via a throttle valve. The support table, easily adjustable in height, enhances usability and comes with a multi-function die for effective straightening of both flat materials and corrugation. Whether for straightening beams or material testing, the KNWP 30 M provides the power of a 30 t pressure force with a total piston stroke of 160 mm, making it a must-have in any mechanical workshop, garage, or locksmith's shop. For more information or to place your order, please request a quote today. Dcedpouyh Sgofx Afpoc

Condition: used, Automatic DIE Cutter TMZ EW-106 with Stripping UnitBaujahr / Year 1995 - Serial-No. 2643 Format / Sheet Size min. 450 x 450mm - max. 760 x 1060mm Dicke / Thickness min. 200g/m²- max. 2.000g/m² Kartondicke / Thickness corrugated max. 6mm Geschwindigkeit / Production per hour 6.000g/h Dodpjh Uw Tlefx Afpscc Stanzkraft / Pressure total max. 300Tm Dimensions of machne L 4600mm x W 2300mm x H 2080mm Approximate net weight 13.500KGSWith Stripping Unit and double Sheet control. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - Dcodpfsww E Nrsx Afpec System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Condition: used, Year of construction: 2002, Die-cutter Iberica JRK-105 Year: 2002 Description: Stripping unit Blanking unit Technical specifications: Maximum sheet size: 750 x 1050 mm Minimum sheet size: 350 x 400 mm Minimum paper thickness (according to quality):90 – 95 g/m2 Maximum cardboard thickness: 1.5 mm Maximum corrugated board thickness: 3 mm Maximum operational pressure: 300 T Maximum speed: 8500 sheets/hour Main drive motor with variable speed: 20 CV (15 KW) Total power installed: 43 CV (32 KW) Air required pressure: 6 KG / CM2 Dcsdsv Rci Dopfx Afpoc Machine appr. Weight: 23.600 KG Floor space occupied: length 10.10 M. width 6.26 M. height 3.30 M.

Condition: excellent (used), Year of construction: 2014, Straight-line, crash-lock, double-wall, 4-corner and 6-corner boxes. Condition: Perfect! Max. speed: up to 300 m/min; inching speed: 20 m/min Material thickness: up to 1200 g/m² for solid board and corrugated cardboard (E, C, B, AB flute – 3 or 5 layers), max. ~8 mm before folding, ~20 mm after folding Max. thickness of folded box: ~20 mm Modular construction & drives Each section independently driven by servo motor ("SmartServo system") Motorized linear guides for precise carrier transport and positioning Memory Job recall function for fast changeover between repeat jobs Machine sections – main functions: 1. Feeder Section – Friction feeder with adjustable vibrator, side gates, servo-driven, belts with suction feature, touchscreen panel, rear support for long blanks Dsdpfxsw H Nw Eo Afpscc 2. Side Register Section – Aligns blanks to one side for perfect parallel feed; rapid setup; servo motor 3. Pre-folding Section (optional on AC/PC/SL models) – Pre-folder up to 180° (flap), pre-folder up to 135° (third crease), crease openers 4. Crash Lock Bottom Section – Hook and helix set for folding front flaps, adjustable hook tension, B-lock configuration, fast adjustment 5. Gluing Unit – One lower (left) and option for lower right glue tank; optional upper cold-glue system; easy removal and cleaning 6. Folding & Closing Section – Servo-driven outer belts (up to 180°), three full carriers (upper/lower), mini-box folder, service access 7. Trombone / Transfer Section – Independent drive, automatic belt tensioning, pneumatic squaring devices, box transfer system to press section 8. Press Section – Pneumatic/servo press section, manual/auto modes, length approx. 6.5 m (effective ~4 m), pressure adjustment, front squaring device 9. Back-folding Device (only in SL models) – Electronic, asynchronous system with two independent servo motors, easy setup for 4- & 6-corner boxes 10. Optional Scoring / Creasing Module – Servo-driven creasing section, placed before pre-folding, enables deeper scores Technical specifications 1450 SL: Machine length: from approx. 22.4 m (PC/SL) Width: approx. 2.23 m; Height: approx. 1.5 m Net weight: 15 tons Motor power: 40–45 kW; air supply (6 bar), consumption approx. 30 m³/h, glue tank ~155 L 🤝 Megafold Advantages • Material versatility: from thin solid board to heavy corrugated and multi-wall • Wide range of box styles: straight-line, crash-lock, double-wall, 4-corner, 6-corner • Modular and configurable design allows adaptation to specific production needs • Advanced automation and precision: servo drives, memory settings, operator radio-controller, touch HMI • Easy maintenance and cleaning due to modular components and operational access

Condition: new, functionality: fully functional, power: 30 kW (40.79 HP), Year of construction: 2025, A double roller crusher for sand making, also known as a roller sand making machine, is a processing machine that utilizes two rollers to crush and reshape coarse-grained materials such as rock, stone, and ore into finer particles. This type of equipment is commonly used in the production of construction aggregates, artificial sand, and other materials used in various industries. Djdpfxoq Ngamo Afpecc Here are key features and aspects of a double roller crusher for sand making: 1. Double Roller Design: - The crusher has two parallel, counter-rotating rollers that exert pressure on the material. The gap between the rollers can be adjusted to control the size of the crushed particles. 2. Crushing Mechanism: - The material is fed between the two rollers, and as they rotate, the material is drawn into the crushing zone. The rollers compress and crush the material, reducing it to the desired size. 3. Material Feed and Discharge: - The material is typically fed into the top of the crusher and is crushed between the rollers. The crushed material exits at the bottom of the machine. 4. Adjustable Gap Settings: - The gap between the rollers is adjustable, allowing for control over the final size of the crushed material. This feature is essential for producing materials of different particle sizes. 5. Roller Surface Design: - The surface of the rollers may be smooth or have corrugations to enhance the gripping and crushing action. The choice of roller surface design depends on the characteristics of the material being processed. 6. High Efficiency: - Double roller crushers are known for their high efficiency in crushing and shaping materials. The dual roller design provides a more consistent and controlled process compared to single roller crushers. 7. Versatility: - These crushers are versatile and can be used for various materials, including hard and soft rocks, ores, and other aggregates. They are particularly suitable for producing artificial sand. 8. Dust and Noise Control: - Some double roller crushers are equipped with features to control dust emissions and reduce noise during operation, improving the working environment. 9. Application in Sand Making: - Double roller crushers for sand making are commonly used to produce fine aggregates and artificial sand. They are employed in the production of high-quality sand for construction and other applications. 10. Maintenance and Safety: - Regular maintenance is essential for optimal performance. Safety features, such as emergency stops and safety guards, are often incorporated to ensure safe operation. 11. Motor and Drive System: - A powerful motor and a reliable drive system are essential components to drive the rotation of the rollers and ensure consistent and efficient crushing. The specific design and features of double roller crushers for sand making can vary among different models and manufacturers. When selecting or using this type of equipment, it's important to refer to the manufacturer's guidelines and specifications for proper operation and maintenance.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, For sale is a functional CENTURY MWZ1650Q automatic die-cutter with automatic feeding and a stripping section, ideal for efficient corrugated board processing. The machine is in continuous production and ready for immediate use. Specifications and Features: ● Model: CENTURY MWZ1650Q ● Year of Manufacture: 2012 ● Run Count: Approximately 2.7 million impressions (low usage, machine in continuous production) Dcsdswmwdaopfx Afpoc ● Condition: Functional, in continuous production ● Max. Sheet Size: 1650 x 1200 mm ● Min. Sheet Size: 650 x 450 mm ● Max. Cutting Size: 1630 x 1180 mm ● Max. Mechanical Speed: 4200 sheets/hour ● Optimal Operating Speed: ○ Minimum: 1400 sheets/hour ○ Maximum (tested by us): 5600 sheets/hour (depending on the type of material being die-cut and stripping requirements) ● Minimum Waste: 14 mm ● Power Supply: 45 kW (electrical schematic available) ● Corrugated Board Cutting: E, B, C, EB, BC flutes Construction and Equipment: ● Automatic feeding ● Stripping section ● Delivery of blanks onto a roller table ● Machine Dimensions (machine itself): ○ Length: 10 m ○ Width: 4 m ○ Height: 2.56 m ● Dimensions with operator platform: ○ Length: 11 m ○ Width: 5.5 m ○ Height: 2.56 m ● Weight: The central part is the heaviest, over 60 tons, plus lighter components. ● Technical and Operating Documentation: Available (not in Polish) ● Machine foundation diagram: Available

Condition: used, Year of construction: 2012, Overview  This packaging machine for cups was built in 2012 by the German manufacturer Schubert. The machine was last used by a dairy company, is in a well-maintained condition and is available immediately. Technical details  Output: 270 cups/minute Format range Round cups D = 63 - 95 mm H = 35 - 125 mm 2 - chamber cup 86 x 86 mm 109 x 109 mm (square) 125 x 95 mm (oval) Type of packaging Primary packaging Cups in sleeves, then in trays and crates Format range, max. sleeve length flat blank: 450 mm Secondary packaging Trays and trays: Solid cardboard (trays) and corrugated cardboard Format range, flat cut: 200 x 400 mm - 600 x 800 mm Tray height = 15 - 55 mm Tray height = 35 - 100 mm Last used for Tray 24 Tray of 8 12 tray Control: Schubert via individual modules Weight: approx. 15 tons Further information, pictures and videos of the machine on request Djdpfx Afevpd S Repocc

Condition: good (used), Year of construction: 2021, Automatic folding carton gluing machine Manufacturer: Eterna Model: Efold 1100 Elite Year of manufacture: 2021 For microflute board and carton Carton: 200–800 g/m² Corrugated board: N / E / F flute Djdpfxevxvgxj Afpjcc Belt speed: 320 m/min (420 m/min optional) Jogging speed: 20 m/min Main motor: 11 kW Overall dimensions: 12.7 x 2.6 m Total weight: 7 t Max. blank width: 1100 mm Including ERO-TE high pressure gluing system for folding carton gluers 4 cold glue nozzles 21126ä

Year of construction: 2021, condition: good (used), Die-cutting and embossing machine Manufacturer: Heidelberg Model: Promatrix 106 CS Year of manufacture: 2021 Min. sheet format: 300 x 350 mm Max. sheet format: 760 x 1,060 mm Dcsdpfx Aevxu Smsfpec Max. machine speed: 8,000 sheets/h Max. die-cutting pressure: 2.6 MN / 260 t Materials and stack height (incl. pallet) Paper min.: 90 g/m² Cardboard / solid board max.: 2,000 g/m² Corrugated board max.: 4.0 mm Feeder pile height: without Non-Stop max.: 1,500 mm in Non-Stop operation max.: 1,200 mm Max. feeder pile weight: 1,500 kg Without blank separating station Without MasterSet 21126ä

Year of construction: 2001, condition: good (used), Top closing stapler with clamping anvils. For coil staples. Closing of filled folding boxes made of single and double corrugated cardboard. Economical closing of corrugated cardboard boxes with joining and overlapping of flaps with clamping anvils. Suitable for single and double corrugated cardboard. Dsdpfx Aeva Nq Hsfpocc Adjustable penetration depth to suit the type of carton. Ideally suited for use in packaging lines where a high degree of accessibility and efficiency must be ensured. - Housing made of hardened steel for long life. - Clamping anvils return immediately: up to 20 staple cycles/minute - 1,000 staples per coil: up to 10 times less frequent reloading compared to ordinary staplers For convenient operation, use a balancer in combination with a rotary arm system and a suitable spiral hose. See > accessories. MEROLOCK pneumatic stapler - For CR 1/34 spiral staples, arm length 18 mm, - with sound suppressor - With automatic return of the crimping anvil. - The clamping anvils are specially hardened to extend their life.