Used Calendar for sale (49)

Condition: good (used), Renz Punch Super 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Includes a 3:1 square perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a hanger cutout Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. Requires a 3-phase, 380V power supply. Dksdpfxeyg Eabj Afpeh Weight: 400 kg

Year of construction: 1991, condition: good (used), Calendar thermal sealing machine Tecnoblock Made in Italy machine in good condition, working very well year 1991 Dkjdpfx Afeuq Nn Nopeh

Condition: new, Year of construction: 2025, functionality: fully functional, The CAL-one 1200 machine is a revolutionary machine for the production of glued wall calendars, single-part, three-part and four-part. As an option, the fourth station can be converted into an automatic head feeding machine or as a replacement station for feeding heads or blocks. The mechanical speed of the machine reaches over 1200 ready calendars per hour, which translates into a real efficiency of 1200 pieces per hour. The CAL-one 1200 calendar gluing machine replaces the work of 10 people, which significantly increases efficiency in the production of three-part calendars. Dedpewd Ew Nofx Afpjkh

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 340 mm, infeed height: 80 mm, total length: 2,100 mm, total width: 1,780 mm, input voltage: 230 V, Semi-automatic machine for gluing wall calendars, intended for small and medium production runs. Additionally, the machine can be adapted for gluing notebook covers. Thanks to its compact dimensions, it is an ideal solution for production facilities with limited space. The CAL-one mini is equipped with a feeder that allows an 8 cm stack of covers to be placed, which are then automatically picked up for further processing. Glue is applied in designated spots on the covers using spray nozzles. Adjustable guides allow for manual insertion of calendar blocks or headers in a repeatable and stable manner. After gluing, the calendars are deposited onto an elevator. The delivery tray can hold approximately 20 cm of finished products. We also offer a fully automatic machine for gluing three-part and four-part wall calendars, the CAL-one 1200. Dkodpowu Hgyjfx Afpjh

Condition: new, Year of construction: 2025, BINDING LINE FOR CALENDAR 70cm The line consists the following machines; Dsdpfx Afjfdzwnopskh 1.MAGRAF PUNCHING MACHINE EP-70 2.MAGRAF SEMIAUTOMATIC BINDING MACHINE AS-70

Year of construction: 2024, operating hours: 1,226 h, condition: used, functionality: fully functional, machine/vehicle number: G21SJ2408316, WAREHOUSE CLEARANCE – SPECIAL PRICE ON REQUEST!!! The iCombi Pro is the latest combi steamer from RATIONAL. The iCombiPro 20-1/1 Gas model with 20 GN 1/1 slots is easy to use, even for untrained staff, allowing you to achieve outstanding food quality without the need for supervision. The ultra-fast intermediate and self-cleaning programs keep your unit sparkling clean. The appliance has been inspected in our in-house specialist workshop and is fully operational. You will receive an invoice with VAT stated separately. The combi steamer will be available from calendar week 51. These are up-to-date original photos. Service: We are happy to assist you in arranging a certified Rational customer service technician anywhere in Germany. Looking for a specific Rational model? Ask us; we have access to an extensive range of used and new equipment. We are happy to advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic or Pro. Condition: Used, inspected, and fully functional Technical data: • W x D x H: 877 x 913 x 1872 mm • Minimum door opening for transport W x H: 900 x 1900 mm • Serial number: G21SJ24083161025 • Year of manufacture: 2024 • Max. load per shelf: 5 kg • Max. total load capacity: 100 kg • Weight (gas unit): 273 kg • Electrical connection requirements: • Voltage: 1-phase, 230 V AC • Gas connection load: 42 kW • Fuse protection: 63 A • Water connection requirements: • Water inlet (pressure hose): 3/4 inch • Water drain: DN 50 Shipping: • Delivery or self-collection by arrangement Dkedpfx Afsx Dtkbjpeh • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement Do you have any questions, need advice, or would like to view something on-site? You can reach us during our opening hours: Monday–Friday 09:00–13:00 and 14:00–17:00. Sales are subject exclusively to our general terms and conditions (GTC).

Condition: used, machine/vehicle number: 63511, Kalenderstanze - Perfoartion- & Nutmaschine / Calender Punch - Perforiertion - Creasing Machine W. Kroll Gartenberg K80Serial-No. 63511 Arbeitsbreite / Working width max. 800mm Kalenderstanze 3:1 4x4mm mit Daumenlochung Calender Punch 3:1 4x4mm with thumb cut calendar punch Nut- und Perforierwerkzeug / Creasing and Perforation tools Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Dkedsll A Tmepfx Afpjh Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: S18092, The DMK 20 C table cutter, with its compact, robust, and precise construction, is the ideal table cutter for small to medium-sized meat processing companies, upscale gastronomy, as well as large-scale kitchens and catering services. Its thoughtfully designed structure offers the user nearly unrestricted application possibilities across all usage areas. The machine is fitted with two independently operated, high-performance motors that provide versatile control options. Mobility is ensured by an optionally available, robust, mobile base frame. The machine recently underwent a major inspection by the manufacturer DMS in Saarbrücken. The machine’s own weight of 260 kg speaks for itself—a true professional machine! The machine will be available from calendar week 8. You will receive an invoice with VAT shown separately. Our used equipment service for you: 6 months warranty on electrical parts, limited to replacement of defective components, without labor for removal or installation High-quality branded equipment at fair prices Dodoygi Amjpfx Afpjkh Professional refurbishment/inspection & expert cleaning Tested & fully functional – or your money back Flexible choice of shipping or pickup Competent advice – before and after purchase Provision of operating manuals, wiring diagrams & spare parts Testing according to DGUV V3 Machine features: All stainless steel construction Solid cast stainless steel bowl (capacity 20L) High-precision, maintenance-free cutting unit Stainless steel knife head with 6 blades Close-cut clearance within bowl radius Exceptional stability Extremely low-vibration operation Vibration-damping machine feet Cutter lid made of plexiglass Analog, easy-to-read thermometer 6 stainless steel blades, 7 stainless steel spacer rings, two bowls Drive & Control: Separate knife shaft drive with electromagnetic brake Brake release function via push button for cleaning with the lid open Separate bowl drive with directly mounted, maintenance-free gearbox Two speeds, independently selectable Large, user-friendly push buttons with hygienic protective covers Safety Features: Overflow protection device according to UVV Reach-in protection in accordance with UVV Noise protection lid Electromagnetic brake Emergency stop function, machine complies with HACCP Machine complies with UVV BG certified Technical data: Bowl volume: 20L Usable fine emulsion capacity (approx. kg): 16kg Number of blades: 6 Speed (rpm): 1500/3000 Knife shaft power (kW): 3.3/4.5 Supply voltage (V): 400 Control voltage (V): 24 Fuse protection (A): 16 (slow blow) Dimensions W x D x H: 83cm x 80cm x 115cm, including trolley with wheels Weight: 260 kg Serial number: S18092 Year of manufacture: 2020 Type: DMK 20 C Condition: Used, fully reconditioned with major inspection, fully functional Shipping: Delivery or pickup by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by prior arrangement

Condition: used, Year of construction: 2011, Case maker Kolbus DA 260 Year: 2011 Dkodpewdgfzefx Afpoh For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic case counter - Board magazin for manual loading - Board cutter: PS - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control - Device for producing padded cases - Pressing station - Stacking delivery - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 104 mm Max. mechanical speed: Up to 40 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2017, condition: used, This combi-steamer from the manufacturer Rational is a CombiMaster® Plus with 8 x 1/1 gastronorm trays in electric version, allowing you to equip each rack with deeper GN containers if required (conversion to a 10-level tray rack is also possible). This combi-steamer was primarily used for reheating packaged meals and is therefore in very well-maintained used condition. Year of manufacture: 2017. The unit has been inspected in our in-house workshop and is fully operational. The stand shown in the photos is not included in the offer but can be purchased as an option. The combi-steamer will be available from the end of calendar week 6. The images are sample photos of an identical combi-steamer; original photos will follow shortly. You will receive an invoice with VAT shown separately. Our used equipment service for you: Dedpfxoyf Db Io Afpokh - 6 months warranty on electrical parts, limited to replacement of defective parts (excluding labor) - High-quality branded equipment at fair prices - Professional refurbishment / inspection and expert cleaning - Tested and fully functional – or your money back - Flexible shipping or self-collection options - Expert advice before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - Inspection according to DGUV V3 certification The CombiMaster® Plus from RATIONAL is robust and convinces with its features that ensure the highest food quality. It supports the chef’s individual craftsmanship with precisely controlled cooking chamber climate, as well as precise settings for temperature, humidity, air flow and cooking time. Technical data: - WxDxH: approx. 847 x 776 x 1042 mm - Minimum doorway dimensions for transport WxH: 845 x 1050 mm - Capacity: 8 x 1/1 GN - Power supply: V: 400 / kW: 18.6 / Hz: 50-60 - Weight: approx. 143 kg - Serial number: E11MI17112631674 - Year of manufacture: 2017 Condition: used, inspected, fully functional Additional information: Applications: - Steam mode: 30°C to 130°C - Hot air mode: 30°C to 300°C - Combination mode: 30°C to 300°C - Finishing®: Bring pre-prepared and chilled foods to serving temperature under optimal climate conditions - Automatic grease separation for clean cooking chamber air - Manual cleaning programme (see photo set) - 5 air speeds: Whether for delicate or robust products, the CombiMaster® Plus provides the right air circulation for any item - Double-glazed, ventilated door (swivels for easy cleaning) - LED cooking chamber illumination - Core temperature measurement with probe - Cool-down function - High-performance fresh steam generator (automatic rinsing and draining) - Hand shower with return mechanism - Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping available on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, need advice, or want to view something on-site? You can reach us by phone during our business hours: Monday-Friday 9:00 am-1:00 pm and 2:00 pm-5:00 pm. Sale is exclusively in accordance with our general terms and conditions (AGB).

Condition: excellent (used), For sale: professional German paper multi-spindle drill HANG 106 DTK 20. Industrial-grade equipment, ideal for bookbinding shops, printing houses, or the production of binders and calendars. Model: HANG 106 DTK 20 Manufacturer: Constantin Hang Maschinenfabrik Göppingen Number of spindles: 4 Drilling diameters: • Cardboard/paper: up to 3.0 mm • Material samples: 2.5 mm / 6.0 mm / 12.0 mm Drive: PRYM Getriebebau geared motor, 50/60 Hz Stable cast iron construction Adjustable work table Complete machine, ready for operation Technical condition: very good. Used but well-maintained, no play, with original nameplates and operating documentation. Dksdoudl Anjpfx Afpjh

Year of construction: 2023, condition: used, Case maker Kolbus DA 370 Year: 2023 New generation of casemaker for faster production and shorter make-ready times. Automatic production of book cases, files, display cards, calendar backs or game boards, at rates of up to 65 cycles/min. Maximum production and process reliability in the manufacture of book cases. The DA 370 casemaker is a versatile machine for a wide range of applications. The machine with its non-stop case feeder is engineered to be ergonomic and extremely operator-friendly so that it can be easily operated by one person. Configuration: - Copilot system with touchscreen - sectional touch panel for direct operation - large display for showing the speed and malfunction messages - board prestacking conveyor to automatically reload the magazines (stream cover and stack feeder) - counter-stacker delivery with roller conveyor delivery incl. table - cloth feeder for non-stop operation with stack magazine - missing product check during separation of cloth and cardboard - cloth cylinder with grippers and interchangeable plates for rubber pads (5 plates 500 mm wide and 5 plates 720 mm wide, incl. 10 rubber pads) - cardboard centre strip magazine - device used to prepare centre strip roll - centre strip waste chopper - centre strip rub-down unit (head and foot) - rub-down unit used to bond the covering material to cardboards and spine strip without creases - extendable gluing station for processing hot glue with glue preparation in the premelter, heated glue roller and scraper roller - viscosity control unit for an automatic supply of water via a water container with a pump - device for padded cases - function used to request individual cases for monitoring purposes on the operating side - servo-controlled drive technology based on Siemens technology Special equipment: - device for producing quarter-bound cases in two operating steps Dkedpfxjydc A Io Afpoh - device for small format - device for large format - Remote Service Gateway Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 205 x 670 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width open: up to 19 mm - Cloth width: 223 - 708 mm - Cloth height: 158 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm - Centre strip roll thickness: 0,3 - 0,6 mm - Centre strip roll width: 6 - 90 mm - Lining width: 195 - 670 mm - Lining height: 130 - 390 mm

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, total width: 710 mm, total length: 1,280 mm, total height: 1,175 mm, overall weight: 190 kg, working width: 330 mm, input voltage: 240 V, input frequency: 50 Hz, infeed height: 250 mm, infeed width: 330 mm, product width (max.): 300 mm, product width (min.): 138 mm, space requirement height: 1,175 mm, space requirement length: 1,280 mm, space requirement width: 710 mm, stack height: 250 mm, James Burn JBI DocuPunch Plus Automatic punching machine for calendar sheet punching. With the DocuPunch, you can quickly and easily punch small or large batches of calendar sheets or book pages. By using interchangeable tools, holes can be either round or square, with or without a thumb-cut. Extremely easy operation, just like a copier! Description: - Punching system for calendar sheet punching (tool not included) - Compact design, on castors, space-saving - Adjustable speed - Operation via touch screen - Fast job change in approx. 5 minutes - Automatic sheet feeding from high-pile feeder - Quick tool change in approx. 2 minutes - Foldable punching dies - Simple and intuitive format adjustment - Waste bin for punching waste - Sheet output tray Technical Data: Max. sheet size: 330 mm (binding edge) x 300 mm Min. sheet size: 138 mm (binding edge) x 138 mm Material weight: 80 - 250 g/m² Feed stack height: 250 mm Output stack height: 250 mm Speed: 50, 60, or 70 cycles per minute, up to 45,000 sheets (80 g/m²) per hour Punching depth: adjustable, 0.4 - 1.0 mm Electrical supply: 220 - 240V, 50Hz Dimensions: 1,280 x 710 x 1,175 mm Weight: 190 kg Dodpfx Afeygxqgjpokh Tools included: 1x James Burn JBI DocuPunch Wire-O Tool 3:1 Square hole 4 mm 1x James Burn JBI DocuPunch Wire-O Tool 2:1 Round hole 6 mm Year of manufacture: 2023 Runs flawlessly, very good overall condition Counter reading approx. 700,000 Prices are net prices. Invoice with VAT will be issued.

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,700 h, load capacity: 3,000 kg, lifting height: 4,980 mm, free lift: 1,500 mm, load center: 600 mm, fuel type: electric, mast type: triplex, Load capacity 3,000 kg Linde E 30 Mast type: Triplex with full free lift Year of manufacture: 2018 Operating hours: 4,700 Lifting height approx. 4,980 mm Overall height approx. 2,250 mm Djdpfx Afex Rhzwepekh 3rd + 4th valve, double auxiliary hydraulics Sideshift Gross €20,825 Net €17,500 Available in calendar week 2 / 2026 Looking for another forklift or high-lift truck? LPG, electric, or diesel? Write to us and we'll find the right vehicle for you. Subject to errors and prior sale. Sale to business customers only, without warranty.

Condition: new, NEW machine, end-of-series Pit Stop D2H HIGH SPEED double-head creasing and perforating machine, equipped with 2 standard creasing kits (for Head A and Head B) and mobile wheels. The second head, unlike the first, operates from bottom to top. All creasing and perforating tools can be installed on this second head. This allows creasing and perforating to be performed in a single pass; or, by fitting two creasing tools, it is possible to perform creases from both the top and the bottom in one pass, ensuring the correct crease orientation for zig-zag folding. High-performance creasing machine with a maximum output of up to 14,000 sheets per hour. Easy-to-use controls allow for up to 100 creases or perforations per sheet and a memory capacity of up to 200 jobs. The machine can crease, perforate, and punch, making it ideal for WIRE-O binding and calendar production. Dodoxmhflopfx Afpjkh This end-of-series machine can be equipped with the following optional tools: - Digital creasing kit (for both Head A and Head B) - Perforation kit 2/1-3/1-4/1 (for both Head A and Head B) - Micro-perforation kit (for both Head A and Head B) - 100 cm extension - Punching kit in various sizes Technical data: Min./max. sheet size: 8×10 cm / 50×70 cm (with optional extension 50×100 cm) Paper weight: 80 to 600 g/m² Programming: 200 programs (100 operations per program) Minimum crease distance: 0.1 mm Production speed in A4: 14,000 sheets/hour (with 1 crease) Power supply: 400 Volt three-phase + neutral, 50 Hz

Condition: used, Year of construction: 1995, The VITS QRV Variocut, manufactured in 1995, is a machine with a format of 1020 mm, currently in stock and located in Germany. It features a calendar width of 1020 mm and is of the Micromatic type, capable of handling paper weights between 65 and 120 grams. The PC and cutting edge control were replaced in 2012. The machine operates at a maximum speed of 220 meters per minute with register control and includes an embossing unit from 2005. It offers a cutting accuracy of ??plusminus0.3 mm and is equipped with PC control Unico. The delivery terms are FCA. Format: 1020 mm Equipment: used shee cutter with PC control Unico Dedpfx Aovfx Dyefpokh Type: Micromatic PC and cutting edge control were replace in 2012 Embossing unit year 2005 Calender width 1020 mm Machine speed max 220m / min with register control cutting accuracy: +/- 0,3 mm paper weight : max. 65-120 gram

Condition: good (used), Renz Punch 500 Perforator This device is in very good condition. New model with adjustable controls. Electric drive, foot pedal control. The set includes a 3:1 perforation tool, a 4x4mm hole, and a cutout for the hanger. Manufacturer’s description: Dedpfox N I Ibex Afpokh Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a suspension slot Available with QSA slots (quick format change by disabling selected needles without removing the slot) Available with two-piece slots – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) 3-phase powered Weight: 120 kg

Condition: good (used), Renz Autopunch AP 360 V4 Automatic Perforator The machine is in very good condition. Fully automatic format setting via the touchscreen monitor. Includes a 4x4mm perforation tool with a cutout for the hanger. Two-module tool. Manufacturer’s description: Perforation device with a working width of up to 360 mm. Dedpox N D Ukofx Afpokh Designed for continuous operation and heavy loads. The unique „Two-finger” system ensures perfect reception of sheets of varying weights. Two-shelf platen feeder enables continuous operation. After perforation, the sheets rotate around a special drum, maintaining the correct page sequence at the receiving station. Option to use two-piece perforation strips, enabling the perforation of both books and calendars. Perforation up to 2.4mm in a single cycle. Quick and easy replacement of perforation strips. Option to use perforation strips with or without a cutout for the hanger. Quick format changes by disabling selected needles without having to remove the bar. A jogging device is located on the delivery. 230V power supply Weight: 720 kg

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: F-500, working width: 530 mm, type of input current: AC, input voltage: 400 V, overall weight: 200 kg, space requirement height: 1,070 mm, space requirement length: 1,100 mm, space requirement width: 710 mm, input current: 15 A, year of last overhaul: 2024, input frequency: 50 Hz, empty load weight: 200 kg, cutting length (max.): 530 mm, product width (min.): 530 mm, Electric Punching Machine 530 mm. maximum punching width. Dodorzuf Dspfx Afpokh Complete with 3:1 punching tools for books and calendars (500mm) The machine has only done 12,000 cycles from new! Other punching specifications are available, such as 2:1 and spiral coils. POA. Maximum punching thickness per stroke: 2.5mm. Maximum output: up to 1,000 punches per hour, depending on the materials used and the operator's skills. Power: 400v 3 phase 50/60 Hz Dimensions: H 1070 x D 710 x L 1100 mm Weight:195 Kg nett

Condition: good (used), Various wire spools for calendars/exercise notebooks. Dksdpfswlgvcjx Afpsh Various Wire-O spools 2:1 (various colors, various plastic rollers for spiral binding). Calendar hangers, shafts

Condition: good (used), Busch Model B Label Puncher Professional machine made in Germany. Busch is a leader in the production of pallet turners and pushers. Very good condition, ready for production. The machine is equipped with a quick-action hydraulic unit. Safety guards, die-cutting clamps with micro-adjustment in every plane, and additional rotational adjustment. Djdpfx Afox Hqmuepokh Quick and convenient die-cutting leveling. Adjustable feed table in every plane. Long delivery tail. Maximum format 230x230mm Weight 850kg 400V power supply The machine can be used to produce labels, calendars, sample cards, etc.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, saw band length: 6,320 mm, saw band width: 100 mm, total height: 3,000 mm, total length: 13,100 mm, total width: 2,090 mm, cutting width (max.): 1,100 mm, table height: 950 mm, cutting height (max.): 990 mm, table width: 1,400 mm, table length: 11,070 mm, power: 22.5 kW (30.59 HP), Used Holzhäuer Wide Band Saw – 22.5 kW Machine Data: Manufacturer: Holzhäuer Model: Mobilsäge HD90 Machine type: Stationary wide band saw for wood Year of manufacture: 2006 Availability: from calendar week 08/2026 Technical Specifications: Max. log diameter: 1,400 mm Saw band length: 6,320 mm Band width: 100 mm Motor power: 22.5 kW Scorer: yes Hydraulic stops: 4 units Manual stops: 2 units Operation: Joystick – up to 12 functions Extraction connection: yes Condition & Maintenance: Machine in used condition due to daily operation. Hydraulic pump unit replaced in 2025. Dkodpfxoycwnco Afpeh Known defects: 1. Bent support surface 2. Digital cutting thickness setting defective → Optical scale retrofitted All details regarding defects and maintenance given to the best of our knowledge, errors excepted. Inspection of the machine possible.

Condition: excellent (used), Year of construction: 2000, operating hours: 845 h, functionality: fully functional, Machine in top condition (very little use) Machine available calendar week 12/26 Panel thickness: 6 - 45 mm (up to 50 mm with reduced edge cross-section) Coiled material: 0.4 to 3 mm Strip material: 0.4 - 8 mm Dodpfx Aeyc Hp Nofpokh Minimum workpiece width: 60 mm Minimum workpiece length: 180 mm Feed speed: 11 m/min 1901 Edge feeding for coil and strip material Guillotine shear: 0.4 - 3 mm 1906 M Adhesive application system for EVA & PUR glue with sensor-controlled nozzle adjustment; heat-up time approx. 4 - 5 min 1913 Pressure unit: first roller driven, two subsequent pressure rollers 1918 End trimming unit 3 x 0.35 kW, swiveling 0–10° 1942 M Multifunctional milling unit 2 x 0.6 kW, pneumatically adjustable for flush trimming, 15° bevel, radius up to 3 mm 1929 Scraper unit for radii up to 3 mm, pneumatically adjustable 1940 Buffing unit Total length: 4130 mm Electrical connection: approx. 5.5 kW Weight: approx. 1250 kg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 483, Casemaker, Automatic production of book cases, files, display cards, calendar backs, game boards or luxury packaging. Co-Pilot with touchscreen, Automatic case counter, Board magazine for manual loading, Centre strip infeed (flexible), Waste chopper, Cloth feeder, Glue unit, Preheated glue tube, Viscosity control, Device for inside lining with hotmelt, Device for producing padded cases, Pressing station, Tacking delivery. Dkedpfex Ryr Ijx Afpoh

Condition: good (used), Semi-automatic spiral binding machine Renz Autobind 700 III Machine in very good condition, ready to work. Dkjdpfxowt Sums Afpoh Efficient semi-automatic for the production of calendars, notebooks and other products bound in metal spirals. Fast operation Supports spiral diameters in the range of 3/16”-1 1/8” Working width up to 700 mm Crimping thickness approx. 23 mm Efficiency up to 1200 cycles/h The semi-automatic unwinds the spiral from the spool, counts the stitches, cuts the spiral to the specified number of stitches and transfers the spiral section to the crimping zone. The operator places a calendar with previously made perforation on the table The calendar is automatically transferred to the crimping zone after pressing the pedal. Power supply 230V + compressed air Weight 615 kg + cabinet with tools 300 kg.