Used Label for sale (1,408)

Condition: used, Norpak Magazine Sorting and Polywrapping Line, Variable Size Infeed Hopper A4 - A5, In Leaf Capability, 4 Document Feeder A4 - A5, Poly Wrap Station with Heated Sealer Bars & Cut Off, Outfeed Conveyor, 8m x 3m Foot Print, Including Extraction System. S/No. 0701047 (Selection of Polywrap & Potato Starch film) Highest bid is subject to vendors approval. Please Note: This lot is located in Birmingham, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Dedpfszwntqex Aptocl

Condition: excellent (used), Year of construction: 2011, 424 USED König Bun Line: Bun production: Hamburger, hot dog, Kaiser roll, double cut, cut, elongated. Dcedpozifmrjfx Aptel Grain sprinkling on both sides. The line has been inspected and serviced by Koenig. TECHNICAL DATA: - Weight: 30-120 g. EXTERNAL DIMENSIONS (in cm): - Length: 1500, - Height: 450, - Width: 200. EQUIPMENT: - Tipping device - Rex Indistrie divider - Pre-proofer - Labeling - Kaiser roll - Module for baguettes, hot dogs, and hamburgers. - Sprinkling with seeds (double-sided) - Arranging on 60x100 or 60x80 baking sheets. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile.

Condition: used, Year of construction: 2008, Langguth Box Labeler Djdpfxezx Dd Ie Aptocl

Condition: used, Depalletizer and Palletizer – Flema Star C-LC For NRW and Euro crates as well as Euro and beer pallets, 500 crates/hour, Year: 1996, empty crates in from left, full crates out to the right. Crate Unpacker – RICO UNO 1-Head Type 124 For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 350 crates/hour, Year: 2010, right-to-left operation. Bottle Cap and Cork Remover – ADELSKI Type PPE 2005 For NRW, Euro, and Ale 0.5l bottles, 2,000–12,500 bottles/hour, Year: , Operating hours: 8,500, right-to-left operation. Bottle Washer – PAC CB 14-0.5l-R-7 LII Compact For NRW, Euro, and Ale 0.33l and 0.5l bottles, 7,500 bottles/hour, Year: 1998, Machine No. 125, Operating hours: 14,175. Bottle Inspection – SYSCONA LC 10 FD Caustic control + metal detection, Year: 2007. Filler – ICS multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 For NRW, Euro, and Ale 0.33l and 0.5l bottles, incl. product pump, 6,000 bottles/hour, Year: 2011, Operating hours: 7,200, right-to-left operation. Labelling Machine – ANKER Roland 8/3 For NRW, Euro, and Ale 0.33l bottles, 7,000 bottles/hour, Year: 1998, Operating hours: 14,500, left-to-right operation. Inkjet Printer – Keyence MK-G1000 Year: 2022, currently configured for date coding on rear label of ANKER Roland 8/3. Crate Packer – RICO UNO 1-Head L-Machine For NRW and Euro crates, head suitable for Euro 0.5l, NRW 0.5l, and Ale 0.33l/0.5l bottles, 300 crates/hour, Year: 2012, left-to-right operation. Premixer – Jakü PM-E-30-2k For degassing and carbonation, with product tank and 2K Bran+Lübbe pump, 35 hl/h, Year: 1992. Dcedpfxozx Dmps Aptsl Crate Washer – RICO 2500 1-Bath For NRW and Euro crates, 600 crates/hour, Year: 2012, right-to-left operation. 2 CIP Tanks, each 6 hl Steam-heated for filler CIP, with disk change system, Year: 2012.

Condition: new, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 2EG050014, overall weight: 120 kg, height adjustment type: electric, Equipment: documentation/manual, HEUFT PRIME Full-product inspection / inspection system with DELTA-FWb rejection system Manufacturer: HEUFT Systemtechnik GmbH Components of an industrial HEUFT system for automatic full-product inspection and error rejection in filling or packaging lines are offered. Dcodpfx Apozwmg Njtol Base unit HEUFT PRIME Full-product inspection Type/Designation: HBBPRIXXX In-line inspection system for filled containers Modular system for quality control Depending on the available equipment, inspection of fill level, closure, labels, and other quality characteristics Automatic product tracking Connection of rejection systems for sorting out defective products Automatic height adjustment of the detection units for format changes Touchscreen / HEUFT-NaVi operating concept Manufacturer's stated series performance: up to 72,000 containers/h* Rejection system / Rejector HEUFT HBM100036 LI16 10.05 DELTA-FWb SPECTRUM Multi-segment rejection system 16 segments Design: left / Left For the automatic sorting out of detected defective containers Suitable for industrial filling, beverage, and packaging lines. The device is new and unused; it was only unpacked for a completeness check. An inspection can be arranged at any time by prior agreement.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Equipment: documentation/manual, KONICA MINOLTA ACCURIOLABEL 230 Digital Label Printing Press • Manufacturer: Konica Minolta • Model: AccurioLabel 230 • Year of manufacture: 2024 • Machine has been continuously maintained under a service contract _____ TECHNICAL SPECIFICATION Printing System • Digital toner-based label printing system • Resolution: 1,200 × 1,200 dpi × 8 bit • Equivalent image quality up to 1,200 × 3,600 dpi Dcsdpfozx Ri Dsx Aptol • Maximum print image size: 1,195 × 320 mm • Web width in present configuration: 325 – 333 mm Production Speeds Depending on substrate: • 23.4 m/min • 18.9 m/min • 13.5 m/min • 9.45 m/min The machine has mainly been operated at 13.5 m/min, as the current owner achieved the preferred print quality at this speed. All four production speed levels are available. _____ CONTROLLER • Konica Minolta IC-605B • Integrated controller • Operator screen • Direct PDF printing from USB stick possible • Patlite LR4-PP signal tower _____ UNWINDER / REWINDER The machine is supplied complete with: • Integrated BST web guiding system • BST web guiding at both winding units This provides stable and accurate web transport throughout the production process. _____ OVERPRINT EQUIPMENT The machine is equipped with: • Overprint Kit with impression / registration sensor This allows accurate overprinting onto previously conventionally printed label material, making the machine particularly interesting for hybrid production environments. _____ WEB CLEANING & STATIC CONTROL Included: • Web cleaning system for AccurioLabel • Static Eliminator • SWG-400 antistatic brush These systems support clean substrate handling and reliable production, particularly when processing sensitive label materials. _____ SLITTING EQUIPMENT Included: • Longitudinal crush knife system • 3 pneumatic knives • Knife holders According to the present owner, this equipment has never been used. _____ COMPRESSED AIR EQUIPMENT Included:

Condition: used, machine/vehicle number: LC579, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 4500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 4,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. Djdpsw Imp Hofx Aptecl A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is elect...

Condition: ready for operation (used), Year of construction: 2002, operating hours: 84,788 h, clamping force: 500 kN, screw diameter: 40 mm, total width: 1,480 mm, total height: 2,048 mm, overall weight: 7,400 kg, product length (max.): 4,860 mm, Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details. • Screw Diameter: 40 mm (Selected option) • Screw Length (L/D): 20 • Plasticizing Capacity (Standard): 32 g/sec • Plasticizing Capacity (Barrier): 44 g/sec • Dosing Stroke: 200 mm • Screw Speed: 20-400 r/min • Injection Rate: 198 cm³/sec • Max. Stroke Volume: 251 cm³ • Spec. Injection Pressure: 1300 bar • Spec. Injection Pressure (Increased): 2050 bar • Nozzle Stroke: 300 mm • Nozzle Contact Force: 50 kN • Heating Power: 9.2 kW • Number of Heating Zones: 4 (including nozzle) • Clamping Force: 500 kN • Opening Stroke: 500 mm • Ejector Force: 40 kN • Ejector Stroke: 130 mm • Mold Height Min.: 300 mm • Max. Platen Distance: 800 mm Dcedpfx Ajy Hhwdoptel • Mold Mounting Platens Size: 740 x 470 mm • Enlarged Mounting Platens: 740 x 680 mm • Ejection Width: 500 mm • Dry Cycle (Euromap 6): 1.6 sec - 200 mm • Pump Drive Power: 18.5 kW • Oil Capacity: 300 l • Net Weight (without oil): 7400 kg • Dimensions (LxWxH): 4.86 x 1.48 x 2.048 m • Control interface: Integrated keypad and screen (Engel branding) • Power switch: Manual rotary main switch (labeled "Do not actuate under load")

Condition: good (used), machine/vehicle number: 10F5C1B-2A0A, The KEB COMBIVERT F5 frequency inverter is designed for controlling electric motors in industrial applications. The device belongs to the universal F5 series, widely used in machinery and production lines requiring precise speed and torque control. The F5 series is commonly used in industrial automation and supports both asynchronous motors and synchronous servo drives. It features a modular design, high configuration flexibility, and the ability to operate in demanding industrial environments. - Model: 10F5C1B-2A0A - Series: COMBIVERT F5 (Compact version) - Serial number: 301211195 - Production date: 2010-05 - Country of origin: Germany Input (Supply): - 1-phase / 3-phase: 200–230 V AC - Frequency: 50/60 Hz - Input current: 20/14 A (at 230 V) - UL rating: up to 240 V / 20 A Output (Motor): - 3-phase AC output - Output current: up to 10 A - UL rating: 9.6 A - Frequency range: 0–800 Hz Dedsyzpzgopfx Aptjcl Power: - Apparent power: 4.0 kVA - Motor rating: 2.2 kW (2/4 pole motors) The F5 inverter offers: - precise speed and torque control - scalar (U/f) and vector control modes - encoder and sensorless operation capability - integrated functions: * DC braking * PID controller * parameter management (up to 8 parameter sets) * motor protection functions - support for industrial communication interfaces (e.g., Modbus, Profibus, EtherCAT – depending on version) Construction and Visible Components: - control panel with START / STOP / ENTER / FUNC keys - communication port (RJ45, e.g., for operator panel or diagnostics) - connectors labeled X6B, X6C, X6D (communication or I/O interfaces) - terminal strip for control signals and power connections - compact enclosure for installation in a control cabinet (housing size “B”) This type of inverter is used in: - CNC machines and woodworking machinery - production and conveyor lines - pumps and fans - applications requiring variable speed motor control Due to the wide output frequency range (up to 800 Hz), it is also suitable for high-speed drive applications.

Condition: good (used), Year of construction: 2018, KONICA MINOLTA ACCURIOLABEL 190 Year of Manufacture: 2018 _____ Machine Specifications and Equipment:  Total Print Count: ONLY 0.4 million  Web width: 330 mm  Print Speed: Up to 60 ppm  Resolution: 1200 x 1200 dpi  Paper Formats: A6 - SRA3, custom sizes  Duplex Printing: Yes Dcodpfxjyz Ac Ds Aptsl  Connectivity: USB, Ethernet  Toner System: Simitri HD polymerized toner  All spare parts replaced by KONICA MINOLTA GERMANY – like new.

Condition: used, mileage: 66,904 km, power: 125 kW (169.95 HP), first registration: 10/2024, fuel type: diesel, empty load weight: 2,130 kg, overall weight: 3,500 kg, wheelbase: 3,665 mm, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: euro5, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, seat heater, second-hand vehicle warranty, sliding door, soot filter, traction control, XZ1 Model Generation 1, JB7 Parking Package with reversing camera, F2W Winter Package, E1E Digital Extra: Hard Disk Navigation, EY2 Live Traffic Information, E7M MBUX Multimedia System, G43 9G-TRONIC automatic transmission, H15 Heated passenger seat, H16 Heated driver’s seat, W54 Rear doors, double-wing, opening up to the sidewall, E07 Hill Start Assist, LA2 Light Assist, JA8 Crosswind Assist, MJ8 ECO Start-Stop Function, XY5 Model Year 5, J65 Outside temperature display, C6L Multifunction steering wheel, JK5 Instrument cluster with color display, MS1 Cruise control, JF1 Rain sensor, F64 Electrically folding exterior mirrors, F68 Heated and electrically adjustable exterior mirrors, FU5 Exterior mirrors without indicators, T77 Grab handle entry for sliding load compartment door at partition, T16 Sliding door right, L13 Fog lamps with cornering light, IR4 Wheelbase 3665 mm, SA5 Driver’s airbag, SA6 Passenger airbag, E1D Digital Radio (DAB), S23 Double passenger seat, AR2 Axle ratio i = 3.923, S22 Armrest for driver’s seat, S87 Low driver’s seat box, SB3 Comfort suspension seat driver, D03 High roof, E46 Socket in driver’s cab, D50 Continuous partition, IL5 Left-hand drive, RF9 Tire brand Goodyear (90), RS3 Steel wheels 6.5J x 16, L65 Ceiling light(s) load/passenger compartment with door contact, FF4 Overhead storage compartment, LE1 Adaptive brake light, BA3 Active Brake Assist, JB4 Lane Keeping Assist, JW8 Attention Assist, FZ5 Anti-theft alarm system, LG7 LED High Performance Headlights, EY5 Mercedes-Benz emergency call system, JA7 Blind Spot Assist, JA9 Traffic Sign Assist, IT4 3.5-ton model, KP7 SCR Emissions Control Generation 4, E1B Smartphone storage incl. wireless charging, FF5 Storage above windscreen, FJ4 Storage under dashboard, Q67 Rear towing eye, 805 AEJ X4/1, XM4 Acoustic package, V3L All-weather floor mats, W73 Rear door step, IC1 Series C907 / C910 Sprinter, IE0 Series C907 VS30 RWD, L44 Side indicator lights front, VK8 Plastic flooring, XO5 Digital operating manual, EW6 Digital Extra: Remote Services Plus, T85 Entry grab handle rear left corner pillar, T86 Entry grab handle rear right corner pillar, E57 Trailer socket electrics, MT5 Emissions class Euro 5b+ N1, CB7 Chassis: Stabilization Level I, M72 HVO capable vehicle Dsdpfx Apjy Nfauetocl Note: Despite careful checking of all our price listings, errors do sometimes occur. Some may be caused by data transmission issues across different platform providers’ systems; we cannot exclude mistakes on our part either. Thus, all information is provided without guarantee and does not represent a legal claim. A price label cannot be considered a contract component. If you particularly value a certain equipment feature listed in our advertisement, please let us know upon conclusion of the contract. Thank you for your understanding!

Condition: used, Year of construction: 2012, Overview This returnable glass bottling line consists of equipment from KRONES, KETTNER, GM GERA, RINK, SYSCONA, MATEC, FALTERBAUM, Bohrer and further supporting manufacturers. The line is designed for the processing of returnable glass bottles in crates, mainly in 0.33 L and 0.75 L formats. It includes the key process steps from crate depalletizing, crate sorting, bottle decapping, unpacking, bottle washing, empty bottle inspection, filling and screw capping to labelling, full bottle inspection, crate packing, crate inspection and palletizing. The existing crate depalletizer and palletizer are available on site; however, due to their age and outdated technology, it is recommended not to include this unit in the line acquisition. Instead, suitable modern depalletizing equipment can be offered and integrated into the line concept according to the buyer’s requirements. The line has a nominal filling capacity of approx. 18,000 bottles per hour and the premix system rated at 22,000 L/h. The line is scheduled for dismantling in February 2027. Technical Data - Line type: Returnable glass bottling line - Application: Beverage filling in returnable glass bottles - Formats: 0.33 L and 0.75 L glass bottles - Packaging: Bottles in crates - Filler capacity: 18,000 bottles/hour - Premix capacity: 22,000 L/hour - Closure type: Plastic screw caps - Labelling: Wet glue labelling, 2 aggregates Dcjdpfx Aoza Tx Sjptjl - Main machine years: 1996 – 2016 - Dismantling planned: February 2027 Scope of Delivery - Crate Depalletizer | Existing unit on site; not recommended for takeover due to outdated technology. Suitable replacement equipment can be offered and integrated - Crate Sorting System | Syscona | Expert KSA | Sorting on 2 lanes: good / bad | 2014 - Crate Decapper | RINK | KM 690/4K | 2012 - Crate Unpacker | Kettner | Robot Junior RA3/C-T | 1996 - Bottle Washer | GM GERA | ARCADE GEL3 FV1-186/95-16 | 2005 - Crate Washer | Bohrer | R 30 | Crate washing machine | 2011 - Empty Bottle Inspector | Krones | Linatronic | 2014 - Filler / Screw Capper | Krones | Volumetic / Modulfill | 2012 - Labelling Machine | Krones | Universella | 2012 - Closure Inspection | Syscona | Expert FHK | 2016 - Inspection System | Krones | Checkmat 731 | 2012 - Crate Packer | Kettner | 1996 - Crate Inspection | Krones | Checkmat 708 | 2011 - Palletizer | Matec | Rotomat 3B | 2002 - Falterbaum | 20000TD | Premix system; capacity 22,000 L/h | 2000

Condition: used, Year of construction: 2005, Overview Djdjzbha Hjpfx Aptscl The bottle washer was previously used in a mineral water factory. Due to the good maintenance, the machine is in good condition. All basins and the machine body are made of stainless steel. The machine is still working and will be free in early 2027, when the complete line is replaced. Tech Specs - Capacity: 15,500 bph - Cell Pitch: 95mm - Bottles per row: 16 - Dimensions + Weights: Housing: 8350 x 1,860 x 2,990 mm / 21,750kg Ready for operation with attachments: 8,700 x 3,560 x 3,330mm / 37,639kg - YOM 2005 - Formats: - 0,5l - 0,75l The Machine in Detail / Equipment Features - Heated by steam - Pre Cleaning and removal of residual liquids by pulsed rinsing prior to washing - CE certified - Chemical Dosing Pumps - Machine data sheet included - Rotating Spray nozzles - Single End Machine - Label discharge rear right - Label press mounted to the machine - Finger discharge + finger feed - Bottle cells made of plastic - Concentration measurement - NaOH supply liquid - Sectional view arrangement of baths - Spindles SST - Control Siemens S7 - Regularly maintained - Full machine body in SST - Vapor Discharge

Condition: used, Year of construction: 1994, machine/vehicle number: GA23, Used ROBINO & GALANDRINO wirehooder 6000 BPHTechnical Specifications & Performance DataThis automatic wirehooder is engineered for reliable wire cage application on bottles, ensuring consistent tightening and alignment at production speeds suitable for medium-scale beverage production. Manufactured by Robino & Galandrino, the REKORD 10/2 configuration combines a rotary handling system with a long-duration magazine and ground-level loading to minimize downtime during continuous operation. This second hand unit is a strong addition to any used bottling line focused on premium products and industrial packaging efficiency.Manufacturer: Robino & GalandrinoModel: REKORD 10/2Year: 1994Machine type: Automatic wirehooder (wire cage applicator)Production speed: up to 6,000 bphConfiguration: 10 platesWirehood application: Muselet/wire cage applicationMagazine: Long-duration, high-capacityLoading: Ground-level cage loading for uninterrupted replenishmentBottle format compatibility: 1.5LAdvanced Automation & Control SystemsThe REKORD 10/2 platform is designed for dependable, automated performance with straightforward operator controls. The long-duration magazine and ground-level loading streamline replenishment, reducing stops and improving overall equipment effectiveness. Typical safety interlocks and guarding protect operators while allowing efficient access for adjustments and cleaning.Automated wire cage feed and applicationOperator-friendly controls and status indicationSafety guarding with interlocked access pointsQuick replenishment via ground-level magazine loadingProduction Line Integration CapabilitiesThis wirehooder integrates seamlessly into existing bottling equipment layouts, positioned downstream of corking and upstream of labeling or inspection as required. It supports inline operation with synchronized conveyors or can function as a standalone station with appropriate infeed and outfeed controls.Inline or standalone operation modesCompatible with upstream corkers and downstream labeling/inspectionFormat handling for 1.5L bottles; additional formats can be engineeredSuitable for integration within broader beverage production and industrial packaging linesMachine Condition & Maintenance HistoryThis second hand wirehooder is presented in working condition and ready for operation, providing a practical solution for producers seeking reliable bottling equipment with controlled capital investment.Operational status: Ready for operationPre-owned equipment from established engineeringOperational Performance & VersatilityThe REKORD 10/2 is built to deliver consistent wire cage application at up to 3,000 bottles per hour, supported by a 10-plate rotary handling system. The long-duration magazine and ground-level loading reduce changeover interruptions, supporting steady throughput in used bottlin... Dsdpezcf I Djfx Aptecl

Condition: used, Year of construction: 2012, Overview This RINK KM 690/4K empty bottle unscrewing machine, manufactured in , is designed for the automatic removal of screw caps from returnable empty bottles directly inside the crate. The machine is installed in the empty bottle infeed section and removes screw closures before the bottles are transported further towards the bottle washer. The machine is equipped with 4 units, each with 4 x 3 unscrewing heads, allowing multiple bottles to be processed in parallel inside the crate. In operation, the crates are transported continuously under the unscrewing sections. The head units lower cyclically onto the bottles, unscrew the closures and then return to the upper home position. The machine is operated via a Siemens SIMATIC Panel touch display integrated into the stainless steel control cabinet. Technical Data - Manufacturer: RINK GmbH & Co. KG - Machine Type: Empty bottle unscrewing machine - Model / Type: KM 690/4K - Year of Manufacture: Application: Unscrewing / removal of screw caps from returnable empty bottles inside crates - Equipment: 4 units, each with 4 x 3 unscrewing heads - Operation: Automatic crate transport under cyclic lowering unscrewing units - HMI / Control: Siemens SIMATIC Panel touch display - Signal Tower: Red / orange / green status light - Safety: Stainless steel enclosure with transparent sliding doors and safety warning labels - Electrical Supply: 230 / 400 V, 50 Hz - Connected Load: 18 kVA - Current: 25 A Djdpezcgppsfx Aptocl - Condition: Used, installed in industrial returnable bottle line

Condition: used, Year of construction: 2024, machine/vehicle number: LC649, Used Complete Bottling line for vine - glass - 10.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-quality wine production and industrial packaging applications. Centered around a Sympak Master Tronic 40/48/8-8 platform from 2005, it integrates depalletizing, rinsing, isobaric filling, capsuling, wirehooding, labeling, case handling, palletizing, and end-of-line printing. The system is optimized for glass bottles and includes microfiltration for beverage production quality assurance.Manufacturer: Sympak Bottling & Canning S.p.A.Main platform model: Master Tronic 40/48/8-8Manufacturing year: 2005Container types: Designed for Glass bottle handlingProduct types: Ideal for Wine production applications (still and sparkling)Filling principle: IsobaricFiller capacity: up to 16,000 bphCapsuling capacity: up to 7,200 bphLabeling capacity: up to 5,200 bphElectrical supply: 380 V, 50 HzInstalled power (main monoblock): 33 kWOperating pressure: up to 7 barTemperature limits: TS min 5 °C; TS max +85 °CStandards: CE marked; EN 60204-compliant control rulesAdvanced Automation & Control SystemsThe line incorporates industrial automation for coordinated operation across depalletizing, bottle preparation, filling, and end-of-line packaging. Safety interlocks, guarding, and emergency stop circuits are built in according to CE and EN 60204 electrical safety rules. The isobaric filling environment is pressure-rated for beverage production, supporting stable filling performance and product integrity.Production Line Integration CapabilitiesInfeed depalletizing, conveyors, bottle washer/rinser/dryer, isobaric filler, capsuling and wirehooding stations, labeling, coding, case forming/packing/sealing, palletizing, and stretch wrapping are harmonized for inline operation. The equipment mix supports traditional cork and synthetic closures and integrates microfiltration for quality control. Typical wine bottle sizes and formats can be accommodated through format changeovers as defined by the installed components. The overall line throughput is typically balanced by labeling and capsuling stages, with nominal outputs up to approximately 5,200 bph depending on product and format.Machine Condition & Maintenance HistoryThe line is presented in ready-for-operation working condition, with components noted as reconditioned in Italy. Routine service and reconditioning practices have been applied to ensure reliable performance across the integrated stations. The system reflects professional upkeep, maintaining production quality for industrial bottling and beverage production.Operational Performance & VersatilityDesigned for wine bottling, the isobaric filling configuration combined with dedicated capsuling and wirehooding enables both still and sparkling applications. The inclusion of a Win & Tech microfiltration unit enhances p... Dedpfezd Ucxsx Aptscl

Condition: used, Year of construction: 2012, operating hours: 759 h, machine/vehicle number: LC644, Used Kronse CSD filling line for Glass 36000 BPHTechnical Specifications & Performance DataThis line is build in 2012, Krones complete line for glass CSD, rated 36,000 bottles/hour in 1.0 L format, with a 70‑valve isobaric filler and 18 capping heads. ready for operation, and shows 759 working hours.Manufacturer: KronesYear of manufacture: 2012Nominal capacity: 36,000 bphProduct type: CSD (carbonated soft drinks)Container type: Glass bottlesBottle neck finish: 28 mmVolume format: 1.0 LRinsing heads/nozzles: 90Filling valves: 70 (isobaric filler for CSD)Capping heads: 18Working hours: 759Electrical ratings: 400/230 V, 50 Hz; up to 46 A on major modulesLine components: Krones Linatronic empty-bottle inspector; rotary rinsing machine (90 nozzles); isobaric filling machine (70 valves, 18 capping heads); Krones Checkmat filled-container inspector; Krones Autocol labeling machine; Krones Variopac wrap-around packer; Krones Modulpal palletizer; integrated conveyor systemDocumentation: Operating manuals availableLayout: Line layout availableAdvanced Automation & Control SystemsKrones automation with centralized HMI enables recipe-based changeovers and synchronized drives for high-speed CSD operation.Operator HMI for setup and monitoringAutomatic synchronization across rinsing, filling, labeling, packing, palletizingElectronic fill control optimized for isobaric CSD fillingInterlocked safety guards and distributed emergency stopThree-phase 400 V supply with 230 V control circuits, 50 HzProduction Line Integration CapabilitiesEngineered as a cohesive Krones platform and bottling station, maintaining precise glass handling from infeed through palletizing.Inline operation with full conveyor integration from empty bottle inspection to finished palletsFormat range centered on 1.0 L, 28 mm neck glassIsobaric technology dedicated to carbonated soft drinksLabeling via Krones Autocol for accurate application on glassWrap-around case packing (Variopac) and palletizing (Modulpal)Machine Condition & Maintenance HistoryOn power and ready for operation with low hours. Documentation and layout support fast installation and service planning.Operational status: ready for operationLow-hours profile: 759 hoursManuals and layout includedOperational Performance & VersatilityConfigured for glass CSD, providing stable carbonation retention and foam control at 36,000 bph. As a CSD bottling machine, quality control is ensured by dual inspection: Linat... Dcedpfxjzd Uftj Aptel

Condition: used, Year of construction: 2014, feed rate X-axis: 140 m/min, plate length: 3,800 mm, plate width: 2,200 mm, table length: 3,800 mm, table width: 2,200 mm, The pick-up deadlines stipulated in the general terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Plate width max.: 2,200 mm Plate length max.: 3,800 mm Cutting depth main saw: 123 mm Number of grippers: 7 Feed rate max.: 140 m/min MACHINE DETAILS Motor power main saw: 18.5 kW Motor power scoring unit: 2.2 kW Total connected power: 31 kW Control system: WINDOWS 10 Machine programming software: OSI Dcsdpfxjzf H Nms Aptel Barcode label printer: ZEBRA ZT230 EQUIPMENT Lift table Pre-loading roller table Front support tables Saw carriage Scoring unit Grippers on the sliding fence The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8546

Condition: like new (used), TECHMI 10-Piston Automatic Filler – Stainless Steel TECHMI automatic filler with 10 pistons, designed for precise and continuous dosing and filling of liquid, semi-liquid, and viscous products in industrial production lines. The machine is equipped with 10 pistons/filling nozzles, allowing multiple containers to be filled simultaneously in each production cycle, offering an efficient solution for medium to high production industrial processes. Primarily manufactured in stainless steel, it incorporates an in-line container conveyor, a protected filling area, and a control panel for the operator. MAIN FEATURES -Manufacturer: TECHMI -Type: Automatic piston filler -Number of filling pistons: 10 -Multi-nozzle configuration -Automatic volumetric filling system -Simultaneous dosing of multiple containers -Integrated container conveyor -Automatic positioning under the nozzles -Stainless steel construction -Closed filling area with safety guards -Integrated control panel / HMI Dcodozwwa Tjpfx Aptol -Adjustable filling system -Designed for continuous industrial production -Integrable into automatic filling and packaging lines APPLICATION The TECHMI filler is designed for automatic volumetric dosing using a 10-piston system. The containers are automatically transported to the filling area and positioned under the nozzles. The piston system dispenses a controlled amount of product into several containers simultaneously before transferring them to the next stage of the line. The piston filling technology is particularly suitable for products that require controlled volumetric dosing, including products with higher viscosity or consistency than those typically processed by gravity filling systems. It can be integrated with: Container feeding systems Bottle and jar conveyors Capping and sealing machines Cap feeders Weight checkers Metal detectors and inspection equipment Labeling and coding equipment Stacking and end-of-line systems APPLICATIONS A solution especially suitable for food manufacturers, sauce and condiment producers, canning companies, and packaging companies that require an automatic multi-head volumetric filling system. Depending on its configuration, it can work with sauces, creams, purees, pastes, jams, tomato-based products, condiments, and other liquid or viscous products. The 10-piston configuration allows for the simultaneous filling of multiple containers, making it particularly interesting for industrial lines that require automated and repetitive dosing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), CNC Flexible Automatic through-feed ROUTERING, DRILLING and CUTTING (SPLITTING) LINE Min/Max workpieces (panels) width (X axis) with PWX100: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with PWX100: mm 12 / 60 Min/Max workpieces (panels) length-depth (Y axis) with PWX100: mm 100 /1200 (o 600+600) Dodpfxezxc Ncs Aptjcl With automatic base-boards handling A) Loader (Bridge Frame) "MAHROS" Double Station, Mod. Brush CF-SX/D, (with automatic martyr panel management system) and with WEBER Double Labeller B) 1° Motorized Roller table "MAHROS" LS with 90° motorized belts (from longitudinal to transverse) C) Connection transfer, with tilter (180°, up-side-down) "MAHROS" Mod. Rib/C HS-C D) Gantry (Portal) CNC (Drilling) "MORBIDELLI" PowerFlex (PWX) 100 - N° 5 mobile consoles (workbenches) controlled by CN on the X-axis - N° 5 upper drilling units (B), each consisting of: - 2 vertical 30-spindle heads (60 in total per unit), rotating 0°-90° (X- and Y-axis) - 2 horizontal spindles (4 in total per unit), rotating 0°-90° (X- and Y-axis) Total 300 vertical drilling spindles + Total 20 horizontal drilling spindles (X and Y) - 2 horizontal groups (1 R + 1 L) with 1 head each with 21 spindles (21 + 21 = total 42) E) 2° Roller conveyor "MAHROS" TR-C with 90° motorized belts (from longitudinal to transverse) F) Splitter (Longitudinal sawing-cutting) "CELASCHI" Model SPL Base 2 (for splitting panels in 2) With 3 working units. After cutting, panel width (MIN 70+70 mm; MAX 600+600 mm) G) Stacker (Bridge Frame) "MAHROS", double station Mod. Brush SSL/D (with automatic management system for martyr panels), with "WANDRES" panel cleaner

Condition: good (used), Approx. 4–500 units, Isoco, Euro container / small load carrier RL-KLT 6147 – used: Dcodjzv Ip Aepfx Aptel Price per unit, ex works: €3.50 (net)! Manufacturer: Isoco Type: RL-KLT 6147 Year of manufacture: unknown Dimensions (L x W x H): 600 x 400 x 147 mm Weight: approx. 1.82 kg Smooth bottom With drain holes Blue Manufactured according to VDA standard 4500 Smooth container bottom with water drain holes Ideal for automated logistics processes Lid slots for matching top lids Integrated label areas for barcode labeling Temperature resistant from -20 °C to +100 °C New price: approx. €8.39 Condition: good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: excellent (used), ZILLI & BELLINI 40-Piston Rotary Filling Machine – Stainless Steel Automatic rotary filling machine by ZILLI & BELLINI, equipped with 40 pistons, designed for volumetric filling of containers in high-production industrial lines for the food and canning industries. The machine incorporates a rotary filling system with 40 pistons, allowing for the continuous processing of multiple containers as they move along the carousel. This configuration provides an efficient solution for lines that require automatic, uniform, and high-capacity dispensing. Primarily manufactured from stainless steel, it features a robust industrial construction designed for continuous operation. KEY FEATURES -Manufacturer: ZILLI & BELLINI -Type: Automatic rotary piston filling machine -Number of pistons: 40 -Volumetric filling system Dcsdpozw At Eofx Aptel -Rotary filling carousel -Automatic and continuous operation -Automatic container handling -Automatic container infeed and outfeed -Transfer stars -Stainless steel construction -Robust industrial design -Suitable for high-production lines -Integrable into automatic filling and packaging lines -Designed for the food and canning industries APPLICATION The ZILLI & BELLINI is designed for continuous volumetric filling of containers using a rotary carousel equipped with 40 pistons. The containers are automatically transferred to the carousel, where they are positioned for dispensing. During the rotation, the piston system introduces the corresponding amount of product before transferring the filled containers to the next stage of production. The combination of 40 pistons and rotary operation is particularly interesting for facilities that require a continuous flow of containers and a high level of automation. It can be integrated with: Container feeders and conveyors Product feeding systems Can closing machines Cap feeders Weight checkers Inspection equipment Pasteurizers and autoclaves Labeling and coding systems Stacking and end-of-line equipment APPLICATIONS Especially suitable for canneries, vegetable canning manufacturers, sauce producers, ready-made meal producers, and other food industries that require a high-capacity automatic filling system. Depending on its configuration, it can be used with liquid, semi-liquid, and viscous products, such as sauces, purees, creams, pastes, tomato products, and food preparations. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), HERMASA TUNIPACK-500 Automatic Packaging Machine The HERMASA TUNIPACK-500 is an automatic packaging machine designed for the automatic placement and packaging of products into containers within industrial food processing and preservation lines. Manufactured by HERMASA, a specialist in machinery for the canning industry, the TUNIPACK-500 is designed to automate the product loading and distribution phase into the container, reducing manual handling and providing a continuous and uniform process. Dcsdpfx Ajzw A Shsptol Its industrial-grade construction in stainless steel, combined with the automatic feeding and control system, allows for integration into highly automated production lines. MAIN FEATURES -Manufacturer: HERMASA -Model: TUNIPACK-500 -Type: Automatic packaging machine -Automatic feeding and packaging system -Controlled product handling -Continuous industrial operation -Robust stainless steel construction -Integrated transport system -Control panel with HMI screen -Protections and safety systems -Designed to reduce manual handling -Integrable into existing canning lines -Hygienic construction for the food industry APPLICATION The HERMASA TUNIPACK-500 is designed to automate the packaging operation within an industrial canning line. The product is fed into the machine and managed automatically during the packaging process, facilitating its correct introduction and arrangement into the containers before continuing to the next stages of production. It can be integrated with: Product feeding systems Container conveyors Product preparation equipment Dosers Can sealing machines Inspection systems Container washers Autoclaves and sterilization systems Labeling machines Complete automatic canning lines APPLICATIONS Particularly suitable for canning industries and fish processors looking to automate the packaging process and reduce manual operations on the production line. The HERMASA TUNIPACK-500 provides an industrial solution to achieve a continuous flow of product and facilitate its subsequent closing and processing. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), ZACMI 40-Cup Rotary Telescopic Filler – Stainless Steel ZACMI automatic telescopic filler with 40 cups, designed for the volumetric filling of solid and particulate food products into containers within continuous industrial production lines. Manufactured by ZACMI, the machine features a rotary telescopic filling system with 40 dosing cups, enabling the automatic and continuous feeding, dosing, and filling of the containers. This type of technology is particularly interesting for the canning industry, where a regular volumetric dosage of solid or particulate products is required, along with their proper introduction into cans or other rigid containers. Its construction, primarily in stainless steel, along with the rotary carousel and automatic transport systems, provides a robust solution for high-production industrial lines. MAIN FEATURES -Manufacturer: ZACMI -Type: Automatic telescopic filler -Number of dosing cups: 40 -Telescopic volumetric filling system -Rotary configuration -Multiple filling stations -Automatic product dosing -Automatic container handling -Continuous container input and output -Integrated conveyor -Construction primarily in stainless steel -Perimeter safety guards -Designed for continuous industrial production -Integrable into automatic canning lines APPLICATION The ZACMI filler is designed to perform continuous volumetric filling using a rotary system with 40 cups. The containers are automatically fed and transferred to the filling carousel. During the cycle, the dosing cups control the amount of product and transfer it into the container. Once filled, the containers automatically continue to the next stage of production. It can be integrated with: -Product feeding systems -Can feeders and conveyors -Liquid or brine dosing systems -Can sealers Dcedpozw Dbwsfx Aptel -Lid feeders -Weight checkers -Container washers -Pasteurizers and autoclaves -Labeling and end-of-line equipment APPLICATIONS Especially suitable for canning industries and processors of vegetables, legumes, and other solid or particulate foods that require a high-capacity automatic filling system. Depending on its configuration and installed format, it can be used with vegetables, legumes, olives, and other solid or particulate products intended for canning. The combination of 40 cups, rotary operation, and telescopic filling technology makes this ZACMI a particularly interesting solution for continuous production canning lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: like new (used), FERRUM F504 Automatic Can Seamer – 4 Heads FERRUM F504 automatic can seamer, designed for the hermetic sealing of metal containers using a double seam in industrial production and food packaging lines. Manufactured by FERRUM, a specialist in can seaming technology, the F504 features 4 seaming heads and is designed to operate automatically and continuously, providing uniform and reliable sealing between the container body and the lid. Its fully enclosed design, industrial construction, and safety systems make it particularly suitable for canning lines with medium to high production volumes. MAIN FEATURES - Manufacturer: FERRUM - Model: F504 - Type: Automatic can seamer - Number of seaming heads: 4 - Seaming system with double seam - Automatic rotary operation - Continuous container feed - Automatic can positioning - Automatic lid and container sealing - Continuous industrial production - Robust construction for intensive use - Complete enclosure of the work area - Access doors for inspection and maintenance - Guards and safety systems - Integrable into automatic filling and seaming lines APPLICATION The FERRUM F504 is designed to automatically perform the hermetic sealing of cans by forming the double seam between the container body and its corresponding lid. The cans are continuously fed and transferred to the seaming stations. The 4 heads allow the process to be carried out in a rotary and continuous manner before discharging the containers to the next stage of production. It can be integrated with: Can fillers Product dosing machines Lid feeders Container conveyors Can washing and drying machines Weight checkers Inspection systems Pasteurizers Autoclaves / retorts Labeling machines and end-of-line equipment APPLICATIONS Particularly suitable for canning industries, processors of fish and seafood, vegetables, meat products, pet food, and manufacturers of canned foods that require a reliable and continuous automatic seaming system. Dodszw D Scepfx Aptecl The combination of FERRUM technology, model F504, and a 4-head configuration provides a particularly interesting solution for automatic industrial filling and can seaming lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.