Used Ladder for sale (810)

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 44,000 kg, color: yellow, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Available immediately!!! Specially designed recovery boom with lifting fork for recovery and towing of damaged vehicles, trucks, tractor units, buses, trailers, etc. Fully hydraulic system. 3rd coat HDRV paint (STANDARD) Toolboxes (internal): yellow RAL 1032 Toolboxes (external): yellow RAL 1032 Lifting fork: black, U-TEXT RAL 9005 Recovery boom: black, U-TEXT RAL 9005 Rear stabilizers: black, U-TEXT RAL 9005 Fpsdpspl Avdofx Ag Rjb Counterweight (front, under cab, if applicable): black, U-TEXT RAL 9005, smooth front chassis (STANDARD) - Hot-dip galvanized - For installation of front counterweight - Rear part painted in superstructure color (STANDARD) - Lifting angle 40° (Illustration HDRV 1013) - Mounting plates for main and auxiliary winches - Shackles 2x15000kg - Left and right side on the rear part of the arm - Space for spare wheel holder on recovery boom. 6. Lifting fork (STANDARD) - Position range relative to horizontal axis: -5° / +10° - Load capacity retracted: 20,000 kg - Load capacity extended: 10,000 kg - Extension: 3,800 mm - Range up to hydraulic rear stabilizers (STANDARD) - Independently controlled - Maximum width: 3,000 mm - Rotating stabilizers for asphalt work and hydraulically extendable beam, No HDRV 1013 Single extension: 0 - 3,000 mm Maximum payload: 2,000 kg – tank storage behind cab - Relocation of air tank behind cab - Relocation of battery behind cab - Relocation of AdBlue tank - Counterweight behind cab on front frame (weight 100 kg) - COME UP Bison 50 main winch, mounted on recovery boom, pulling force 22, - COME UP Bison 50 auxiliary winch, mounted on recovery boom, pulling force 22, - Hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - Hydraulic control block on right side (STANDARD) - Right side, rear quick couplings for brake system supply, transferred from chassis - Quick-release connector with 20-meter cable - Air pressure roller, on left side of superstructure, - Over rear axles electrical trailer socket + trailer coupling, from chassis - Jump-start aid 12V/24V, cable, lever, right side mounted - Jump-start aid 12V/24V, cable, lever, left side mounted - Camera + LCD monitor in cab - Camera for winches + LCD monitor in control box MONITOR: - Vibration resistance: 10G - Shock resistance: 100G - Operating temperature: -30 to +70°C - CE marking - EMC approval: includes emergency stop switch - Radio remote control – 1 function - Made from aluminum - Holders for tools and accessories - Floor with rubber mats - Small ladder - Auxiliary ladder in toolbox opening – doors - Guard rail on toolboxes – stainless steel - Aluminum platform, perforated, mounted on top of toolboxes - Stainless steel holders in large toolbox behind cab for forks, hooks, open - Toolbox edges with stainless steel profiles - Lighting package compliant with road traffic regulations - LED lighting in toolboxes - LED external lighting - GAMET DE LUX LED warning lightbar, 1,800 mm - Mounting of warning lightbar on upper part of superstructure - ORANGE BLITZ warning light, 2 pieces – front mounted - ORANGE BLITZ warning light, 2 pieces – rear mounted - ORANGE BLITZ warning light, 2 pieces – mounted at edge of last toolbox door - Switches for all auxiliary lights

Condition: new, functionality: fully functional, power: 330.97 kW (449.99 HP), axle configuration: 6x6, fuel: diesel, gearing type: automatic, Year of construction: 2025, Equipment: air conditioning, all wheel drive, differential lock, trailer coupling, truck registration, From our new vehicle range, we offer you: Large Tank Firefighting Vehicle GTLF 9500-Crew 6x6 All-Wheel Drive on Off-Road SCANIA P450 XT Chassis Challenging operations require high-quality and powerful equipment. Our GTLF 6x6 on Scania reliably and swiftly transports personnel, equipment, and large quantities of extinguishing agents to the scene. Chassis: • SCANIA P450 XT 6x6 EURO 6 with 450 HP (331 kW) and automatic transmission • Off-road tires, both rear axles with twin tires for high driving stability • Front winch available upon request Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Standard 4 SCBA holders in crew compartment • Air conditioning and auxiliary heating Superstructure: • High-quality, frame construction made from rust- and corrosion-free materials • Folding steps for each side compartment • Custom-designed stainless steel equipment storage per your requirements • Walkable, anti-slip vehicle roof • Ladder mount, optionally with removal aid Fire Pump/Agent Tanks: • Maintenance-free combined low pressure pump FPN 6000-10 Fpsdpfxjxh Dvps Ag Rob • Pump & Roll capable • Output 6,000 l/min at 10 bar • Integrated, infinitely adjustable foam proportioning system • Water tank 9,500 l with integrated foam agent tank 950 l • Additional heater in pump compartment Firefighting Equipment: • Rapid attack reel with 60 m rigid hose • Foam/water turret 3,600 l/min roof-mounted, remote controlled option available • Additional front turret available • Self-protection system with 4 spray nozzles in front of the wheels Safety and Lighting: • LED lightbar on the vehicle roof • LED front flashers • Pneumatic special signaling system • 100 W loudspeaker system with announcement unit • Rear view camera • Extensive LED lighting in crew and all equipment compartments • LED scene lighting on the superstructure and auxiliary spotlight • Pneumatic LED light mast with remote control • Hygiene board available on request Pictures show a similar customer vehicle with optional equipment in some cases. We are happy to provide you with a detailed offer and introduce the vehicle to you comprehensively. All details provided to the best of our knowledge, without guarantee of completeness or correctness. This ad is not a binding offer, but for information purposes only. Subject to prior sale!

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Fpedpevvkipofx Ag Rsb

Condition: used, maximum load weight: 26,680 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 09/2016, next inspection (TÜV): 09/2026, loading space length: 6,600 mm, loading space width: 2,300 mm, loading space height: 1,400 mm, loading space volume: 20 m³, Year of construction: 2016, Equipment: ABS, Stock no. 5683 Approx. 20 m³ Langendorf Tipper Semi-Trailer / Compact Semi / Long Wheelbase 1st and 2nd Axle! / Lift Axle ---- * Manufacturer: Langendorf * Model: SKS-HS 20/25 * First registration: 06/2016 * Gross weight: 32,000 kg * Unladen weight (as per registration): 5,320 kg * Payload: 26,680 kg * Suspension: Air suspension with raising/lowering function * Axles: 2x BPW, 1st axle as lift axle / drum brakes * Wheelbase: 1.81 m * Tyres: 445/65 R 22.5 approx. 50% tread * Technical inspection (TÜV): valid until 09/2026 * EBS Wabco * Colour: Chassis grey, tipping body blue, tarpaulin blue * Volume: approx. 20 m³ (6.60 m long x 2.30 m wide x 1.40 m high) * Swivel tailgate with automatic 2-hook locking system * Operator platform with front left access ladder * Saddle height when loaded: 1,330 mm * HARDOX HB 450 tipping body * Automatic lowering when tipping * Single mudguards * Rolling tarpaulin * Wabco Air Suspension Control Box Fpjdpfxoxpb Uxo Ag Rjb * Load pressure gauge * LED reversing lights * Foldable underrun protection * Tow coupling * 1 owner German trailer!! German documents!! 1 owner!! Note regarding possible errors in the listing: Despite careful preparation, errors in the text or specifications may occur in rare cases. We assume no liability for mistakes, changes or prior sale. All information is provided without guarantee. Please contact us to verify details or to ask further questions.

Condition: used, mileage: 74,000 km, power: 96 kW (130.52 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,300 mm, loading space width: 2,200 mm, loading space height: 2,280 mm, Year of construction: 2020, DEK:[10360784] - Used Truck: Ford Transit 350 Dual Rear Wheel with Alloy Box Body. - Year: August 2020, Engine: 2.0 TDCi 130 hp Euro 6d, 6-speed transmission, Mileage: 74,000 km. - 3.5-ton gross vehicle weight, Dual rear wheels, Reinforced leaf spring kit. - Body: Aluminum alloy box body, External dimensions: 4,300 x 2,200 x int. useful height 2,280 mm. Marine plywood load floor, Full-height interior wood lining, Rear ladder. 1 tool box, 1 Meroni security lock on rear doors. - Trend trim, equipped with: Air conditioning, Radio-Bluetooth with USB, Fog lights, Central locking, Cruise control, On-board computer, Smartphone holder, LED daytime running lights, Double keys, Spare wheel, Driver airbag. - Bodywork and interior in excellent condition, 12-month mechanical warranty. - Inspection valid until September 2026, One-owner vehicle. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Como Province), Lombardy Opening hours: Monday to Friday: 8:30 / 12:15 - 14:00 / 19:00 Saturday: 8:30 / 12:00 - 14:00 / 17:00 - Certified mileage. - Test drive available by appointment. - In-house ownership transfer. - Tailored financing options available. Carlo Mauri S.r.l. declines any responsibility for possible unintentional discrepancies in the ad, which does not represent any contractual obligation. Prices shown exclude VAT and registration/ownership transfer costs. Fpodpfx Agjxnrqnj Rob

Condition: reconditioned (used), Year of construction: 1975, Dorries VSE 125 Twin Ram CNC Vertical Grinder With Dual R&D CNC VGC-2 Controls (1975, overhauled in 2008) Fpodpex Swylofx Ag Rjb SAV Ø1,250mm Magnetic Chuck. Maximum Machining Ø1,2500mm, Maximum Machining Height 500mm. Grinding Wheel Mounts 127mm. Both Rams Can Be Pivoted. With Dual Roller Diamond Dressers, Dual MPM Digital Balancer, Rexroth Hydraulic Tank & Column Service Ladders. Approx Overall Dimensions L4.43 x W3.3m.

Condition: used, Year of construction: 2022, operating hours: 919 h, Claas Lexion 6800 TT Year of manufacture: 2022 Engine hours: 918 Drum hours: 635 Hectares: 2,474 Fjdjxq Sfkspfx Ag Rjpb Current equipment: - LASER PILOT steering system, left - Header drive M, constant - Header feed roller with 2-way system, M - HP channel – AUTO CONTOUR, chain, open return pulley - Automatic hitch - Dust extraction for E/V/HP channel - Hydraulic top link for HP channel - Header brake - APS threshing system – grain/maize (10/18/18) - Threshing drum drive – 330-930 rpm - Threshing concave segment - Center guide for straw walkers, mounted - JET STREAM cleaning, incl. 3D and grass wind reduction - Returns volume measurement with CEBIS display - Upper and lower sieves, TM6 - Grain tank 12,500 liters - Grain tank preparation with unloading aid for grass - Grain tank discharge auger L, Ø 330 mm - Grain tank unloading rate 110 l/s - Grain tank unloading drive 80 l/s – 130 l/s - Fixed spout – grain tank discharge auger L, Ø 330 mm - Radial spreader – SPECIAL CUT - Swath former – radial spreader - Straw chopper drive for radial spreader – premium - Drive axle XL – TERRA TRAC - Support wheels for track system - Recovery lugs for TERRA TRAC front axle - TERRA TRAC track width 635 mm - Access ladder with anti-collision protection – TERRA TRAC - Steering axle M, adjustable - Steering axle tires 500/85 R24 x 275 IMP, 8-hole - Travel speed 30 km/h - Without railings - Mercedes-Benz OM470 LA – 340 kW/462 HP (Stage V), air-cooling - Fuel tank 950 liters - Engine PTO pump - A/C-MATIC – automatic climate control with heater - Radio with MP3 function - Roller blinds for side windows - CEBIS terminal with armrest, standard - Camera system, pre-installed - Camera – rear, display in terminal - Camera – hitch, display in terminal - LAAS Remote Service incl. five-year license - TELEMATICS advanced license – 1 year - Comfort seat, air-suspended - LED work lighting – Plus - Large toolbox incl. instructor’s seat - CEMOS AUTOMATIC – AUTO SLOPE - CMOTION multi-function lever - Automatic module - Add-on module 1 - Add-on module 2 - Slope sensor - Steering angle sensor - CLAAS communication module (LTE) - Central locking system, standard - LED tail lights, extendable - CAN Ethernet Gateway (CEG) - FIELD SCANNER/LASER PILOT/AUTO PILOT ready - Automatic discharge direction adjustment - Straw chopper – counterblade/grate adjustment, hydraulic - Rear-view mirrors, electrically adjustable - Automatic chain lubrication for grain tank unloading Incl. Vario 930 header Incl. transport trailer | Internal no.: 11064749

Condition: used, functionality: fully functional, mileage: 55,000 km, power: 170.64 kW (232.01 HP), first registration: 12/1991, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 4x4, fuel: diesel, color: red, gearing type: mechanical, Year of construction: 1991, Equipment: all wheel drive, parking heater, From our immediately available used vehicle inventory, we offer you: Fire engine LF 16/12 4x4 all-wheel drive, 1,600 l water tank, on MAN 14.232 chassis General information: • Year of manufacture: 1991, first registration: 12/1991 • Mileage: approx. 55,000 km • Permissible total weight: 14,000 kg • RAL 3000 (fire red) Chassis: • MAN 14.232, 4x4 all-wheel drive, 232 HP • Diesel engine with manual gearbox and power steering • Towing hitch Cab: • Crew cab (1:8) in RAL 3000 (fire red) • Mountings for 2 self-contained breathing apparatus facing against the direction of travel • Mountings for 2 self-contained breathing apparatus facing the direction of travel • Auxiliary heater Bodywork: • Built by Ziegler • LF 16/12 superstructure according to DIN standard • Two spacious side equipment lockers per side Fjdpfoxflnhox Ag Ropb • Fold-out steps for side equipment compartments • Mountings for standard equipment • Hose reel carriage fitment • Storage racks for extension and sliding ladders on the roof Firefighting pump/extinguishing agent tank: • Ziegler FPN 1600-8 centrifugal fire pump • Capacity 1,600 l/min at 8 bar • Water tank 1,600 l • Foam agent tank 400 l Firefighting equipment: • Rigid rapid intervention line (top, G6) • Roof monitor • Built-in foam inductor Safety and lighting: • 2 blue revolving warning beacons • Siren system • Crew and locker compartment lighting • Surround lighting • Auxiliary spotlights • Rear view camera • Rear warning system • Light mast 2 x 1000 Watts (operated by generator) • Hygiene board available on request We would be pleased to make you a detailed offer and give you a full presentation of the vehicle at our premises in Berlin. All information provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Condition: refurbished (used), Year of construction: 2024, operating hours: 4 h, functionality: fully functional, Equipment: documentation/manual, For sale is a fully renovated TORNOS DECO 20 type longitudinal lathe. The renovation was carried out by Tornos specialist service with factory parts and covers the following units: - painting of coverings - replacement of all ball screws - replacement of all linear guides - replacement of all cables and cable ladders in the machining area - replacement of the entire pneumatic system - replacement of the entire coolant system - replacement of all axis servomotors - renovation of all spindle motors - main and control spindle renovation - renewal of rotating guide bush and synchronous drive - refurbishment of Fanuc control and servo amplifiers - power elements, partial replacement of electrical components Description TECHNICAL DETAILS - Number of axes : 8 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 220 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] (5,5kW) - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 25,4 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 1,5 [kW] (2,2 kW) - C axis indexing precision : 0.1 [°] CROSS SLIDE 1 - Number of positions : 5 CROSS SLIDE 1 - Number of positions : 5 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] - Live tools power: 1,5/2,2 kW BACKWORK UNIT - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 6000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 14 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2270 x 1650 [mm] - Machine height : 2200 [mm] Fodpfx Agouq A T So Rspb - Machine weight : 3500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 Horizontal (8000 1/min 1,5/2,2kW) - Rotating guide bush (syncronised) - Parts catcher - Ejection of workpiece - Coolant tank - Bar loader LNS ALPHA 320S OPTIONAL: Long piece ejector device (max. workpiece lenght 700mm) OIL MIST EXTRACTION – SEI EMC 1000 with stand or. ELBARON RON 100 D2TR The equipment has been almost completely renovated and is in perfect and new condition. It has a long piece ejector and a new LNS bar feeder, it can optionally be equipped with an oil mist separator and other accessories, which we can also provide. If you are interested, we will provide you with additional information and pictures. The longitudinal lathe can be viewed at our site in Hungary, even during operation, at a pre-arranged time.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total width: 1,420 mm, total length: 1,830 mm, total height: 2,500 mm, empty load weight: 900 kg, Offered here is a used WK04 scale from KMK. Possible weighing range: 400g - 25kg Suitable for potatoes, onions, and beetroot Year of manufacture: 2019 Videos can be sent via WhatsApp upon request. Manufacturer details: WK04 Scale (Partial Portion Weigher) - Machine built from sandblasted and double powder-coated steel - Combination weigher with 4 weighing hoppers - 11-liter capacity per weighing hopper Fedpfsx R Umtjx Ag Ropb - For package sizes from 400g to 2500g, target weight is achieved in a single discharge - For 2.5kg to 15kg, target weight is achieved in two discharges - From 15kg upwards, target weight is achieved in three or four discharges - Package sizes from 0.4kg to 30kg - Independent feeding with vibratory plates - Vibration intensity of the feed adjustable via potentiometer in the control cabinet - Integrated cross conveyor with extra soft, curved carriers - Cross conveyor runs only after release by the packaging machine or, during manual packing, upon footswitch signal - For optimal product handling and adjustment to package size, the cross conveyor speed can be set using a frequency converter - Service platform with ladder - Product-contacting parts made of stainless steel - Optimal weighing achieved by easily adjusting multiple parameters relevant for filling the weighing hoppers (filling time, refill, tolerance, etc.) - Creation of up to 40 programs for different products, weights, tolerances, and outputs - Simple program management and operation via touchscreen monitor - Mitsubishi PLC - Fill level sensor for controlling the feed conveyor - 5 heavy-duty height-adjustable support feet - Can be interfaced with common packaging machines

Condition: used, mileage: 1,34,092 km, power: 130 kW (176.75 HP), first registration: 06/2017, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro5, number of seats: 3, total width: 2,080 mm, total height: 2,300 mm, loading space length: 3,630 mm, loading space width: 2,030 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Subject to errors and prior sale! Internal number: 1233. 2B76729 ---- EQUIPMENT - Tipper conversion by Henschel - Radio: Audio system with CD, MP3-capable Bluetooth hands-free system - Touchscreen - Roof storage above the windscreen - Automatic air conditioning - Cooled glove compartment - Outside temperature display - Paintwork: Special metallic paintwork - Fog lights - Reinforced rear springs Fpjdpox Iaxvjfx Ag Rjb - 6-speed gearbox - ABS - Driver's side airbag - Outside mirrors, manually adjustable (2) - Reinforced battery - On-board computer - Tachometer - ESP with hill start assist and ASR - Electric front windows - Height-adjustable headrests (3) - Ladder frame and impact protection behind driver - Emergency brake assistant - Particle filter: Soot particle filter for Di - Upholstery: Fabric - Power steering - Seat: Passenger double seat bench - Seat: Driver's seat, height-adjustable - Socket (12 Volt) in the cargo area - Lashing eyes (8 pieces) - Immobilizer - Central locking with remote control ... and much more ---- The vehicle is unprepared! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing / leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: used, mileage: 500 km, power: 375 kW (509.86 HP), first registration: 12/2025, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #398 Mercedes-Benz Arocs 3551 8x4 with Combined High Pressure Jetting and Suction Pressure Tank Body ADR Type K 1.0-18.0 / 28 PE This Mercedes-Benz Arocs 3251 8x4 with KROLL ADR combined jetting and suction pressure tank body is a NEW vehicle, built for the highest performance requirements. With VacuStar WR 3100, Uraca KD 718, large hose storage cassette, DN125 telescopic boom, and complete ADR L4BH equipment, it is immediately ready for demanding sewer, industrial, and hazardous goods applications. Body • Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH • Tank material: S355J2+N (St 52.3) • ADR suction/pressure tank Type K 1.0-18.0 / 28 PE • Ejector piston with 3 locking positions • Suction from open waters possible (“comfort version”) via boom cassette with integrated filter • Tanker equipment ADR – Type class AT/FL L4BH • Discharge via pneumatically actuated piston • Sludge water outlet DN80 for backflushing via the boom into the channel Vacuum System • CVS VacuStar WR 3100 – approx. 3,100 m³/h at 400 mbar • Approx. 20 m HD hose DN125 • Hose storage cassette with simultaneous telescopic boom DN125 • Parallel routing of suction and HD hoses over the boom • Reach on hit side: 5,200 mm • Hydraulic suction hose reel on the right with 30 m DN75, fully passable High-Pressure System • Uraca KD 718 – approx. 315 l/min at 170 bar Fjdpfx Ajxc Sz Neg Ropb • Large HD hose reel for 240 m DN25, 180° swiveling • Equipped with 160 m DN25 • Small HD hose reel for 80 m DN13, hydraulic • Equipped with 80 m DN13 Special Features • Hose storage cassette with telescopic boom DN125 • Continuously adjustable suction hose height (hydraulic, roller guide carriage) • Hydraulic, telescopic, 180° swiveling boom arm • Electric cable winch on the boom • ADR L4BH, including EX/II, EX/III and AT • Spray gun • LED beacons • LED ambient lighting • CAN-BUS remote control for work functions • Radio remote control with 14 functions • Hot water hand washing unit • Large locker rear left (e.g. for push camera) • Reversing camera • Sound insulation for pump compartment • Large equipment box • Toolbox • Holder for traffic cones • Vice • Ladder • Large advertising boards right & left Special Equipment • Axle load measuring system • Digital radio DAB/DAB+ • ADR equipment package • Right-hand outer mirror with maneuvering position • 220 Ah battery • Interactive multimedia cockpit • 24V / 100A electrical pre-installation cab • High beam and cornering light assistant • Movable cab entry • Front suspension: 9.0 t / 4-leaf • Remote online query function • Tinted windshield with band filter • Vehicle without trailer coupling • ADR hazardous goods version Type FL • Speed limiter • 16-speed gearbox G 280-16 • Gearbox lock (independent of transmission) • Rear axle ring gear 300 • 3-piece mudguards with splash protection • Fuel tank 290 l aluminum, left • Cool box / refrigerator • Cooling package for hot regions • Front air intake • Reinforced engine brake • Trailing axle: 9 t steered, relievable, liftable • Navigation system • PTO – smooth flange • PTO independent of transmission and dependent on clutch MB 1.65 • Programmable special module • Wheelbase variant 3,900 mm • Frame overhang 1,200 mm • Re

Condition: used, mileage: 1,58,150 km, power: 132 kW (179.47 HP), first registration: 06/2016, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 07/2025, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 8,092 mm, total width: 2,757 mm, total height: 2,376 mm, Equipment: ABS, parking heater, tail-lift, We are very pleased that we have aroused your interest with our offer and can assure you that you will be able to buy a good and inexpensive vehicle with a traceable service history from us! Auxiliary heating PTO drive Box with aluminum floor Shelves Ladder rack on the roof Side door Axle hitch Axle hitch mouth Rear axle with air suspension 4,200 mm WHEELBASE GERMAN VEHICLE Fpjdpfx Asvvqwgog Reb REGISTRATION / CUSTOMS SERVICE We organize your registration and the export documents / EUR 1 and manufacturer declaration for export. FINANCING If you wish, we will be happy to make you a LEASING-RENTAL PURCHASE or FINANCING OFFER. SERVICE TÜV-HU / UVV LBW / LGS-TEST / Speedometer test / Installation of OBU device and service by our BRAND WORKSHOP on site TOLL / ROAD TOLLS TOLL can be booked on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 KM away Frankfurt-Hahn Airport 40 KM away Luxembourg Airport 75 KM away Sale in accordance with our terms and conditions. The information on the Internet is non-binding descriptions. They do not represent guaranteed properties. The seller is not liable for tips and data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: used, functionality: fully functional, first registration: 03/1997, fuel type: diesel, overall weight: 14,000 kg, axle configuration: 4x2, color: red, gearing type: mechanical, Year of construction: 1997, Equipment: differential lock, From our immediately available stock of used vehicles, we offer you: Fire Engine LF 16/12 on MAN 14.222 with Differential Lock General Data: • Year of manufacture: 1997 • Mileage: approx. 31,000 km • Permissible total weight: 14,000 kg • RAL 3000 (fire red) Chassis: • MAN 14.222 4x2 with differential lock and 222 HP • Diesel engine with manual transmission and power steering • Tow bar Cab: • Crew cab (1:8) in RAL 3000 (fire red) • Holders for 2 breathing apparatus sets facing away from direction of travel • Auxiliary heater Body: • Manufacturer: Ziegler • LF 16/12 body in accordance with DIN • Two spacious side equipment compartments per side • Folding steps for side compartments • Mounts for standard equipment • Bracket for hose reel • Mountings for 2 additional breathing apparatuses Fodexd Unbepfx Ag Ropb • Storage for extension and hook ladders on the roof Vehicle pump / Extinguishing agent tank: • Ziegler FPN 16-8 centrifugal fire pump • Output: 1,600 l/min at 8 bar • Water tank: 1,700 l • Foam tank: 400 l Firefighting equipment: • Rigid quick-attack line (top of G6 compartment) • Roof monitor • Built-in foam proportioner Safety and Lighting: • 3 blue rotating beacons • Electronic siren system • Lighting for crew and equipment compartment • Additional spotlights • Optional hygiene board and reversing camera All details are stated to the best of our knowledge and belief; no guarantee for completeness or accuracy. This advertisement is intended solely for informational purposes and does not constitute an offer. Subject to prior sale!

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro2, loading space volume: 12 m³, Year of construction: 2024, Equipment: ABS, air conditioning, X TO GO?EUROMIX TO GO? OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES, FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN ACUTE DEMAND SITUATION. (SHORT-TERM CAPACITY EXTENSION OR REPLACEMENT INVESTMENT)Your advantages: Complete vehicles ready for immediate use (concrete mixer/tipper)Immediate availability directly from the manufacturer * body, assembly, commercial vehicle * Best price/performance ratio * Financing options * Trade-in of your old vehicles MAN TGS 41.400 BB 8x4 EURO 2 EuromixMTP EM 12m³ R - NEW NEW - withaut registration - without registration - Vehicle equipment * Engine D2066LF41 - 400 HP / 294 KW * Transmission ZF 16 S 223 OD ( manual gearbox ) * Tires front axle 315/80 R22,5 rear axle 315/80 R 22,5 * Front axle 8000kg - rear axle 13000 kg * Wheelbase 1795+2505+1400 mm * Cab M medium length * Air deflector to prevent dust swirling upwards * Cruise control * Air conditioning * Noise reduction 80 dB (92/97EWG) * AP axle ratio rear axle AP HPD 1382/HP- * Air intake raised with dry air filter / pre-separator * Differential lock * Fuel tank 300l left * Three-piece steel bumper * MAN BrakeMatic ( electronic brake system ) * Disc brakes rear axle and front axle * Central locking * Sun visor EUROMIXMTP - Truck mixer body EM 12 R - Regular Model: EM 12 R * Nominal volume 12m³ ready-mixed concrete * Mixing drum in regular design * Mixing drum in regular design made of material S355 * Mixing spirals in regular design made of material S420 MC * Gearbox make ZF-5300 * Hydraulic pump made by Bosch Rexroth * Hydraulic motor made by Bosch Rexroth * Integrated oil cooling system * Mechanical mixing control and electrical start/stop * Compressed air water system * Water connection on the stand platform with hose line * Water filling line, with C-coupling on one side * Mixing drum with a service flap * Climbing ladder with platform Fpedsvh Aqijpfx Ag Rjb * Rubber attachment on the hopper * Swivel-mounted, single-arm discharge chute made of steel * Wear plates in the feed hopper, discharge chute and swivel chute * Drum lock to secure the drum during maintenance work * Polyurethane primer * Weight approx. 4,725 kg, deviations +/- 5% * With emergency stop function in accordance with EU safety technology * Steel wing above the rear axles * 2x extension chutes made of steel or plastic * Water system * 500 l water tank (compressed air) * Steel water tank * Shut-off valve mounted below the water tank in the filling line * Water connection ?C? coupling, * Operation & electrics * Mixer operation ? mechanical at the rear * Start-stop system (with EDC) * Geometric volume 19420 L * Water tank volume 12787L * Inclination of the tank 10.5 * Length 7545 mm * Width 2300 mm * Height 2765 mm Special equipment: Extension chute plastic - steel - aluminum * Plastic (or steel) folding chute * Retention flap Swivel chute * Plastic box * Stainless steel storage box * Unpressurized additive container * Pressurized additive container * Trowel holder * ? Drum lock * Reversing camera * LED working lights * EuromixMTP intelligent drum control ( electronic mixer control ) * Step on underride guard with grab handle * Water meter * Pressure gauge * Frame cover * Fire extinguisher * Holder for flowing concrete pipe (5 m long) * Transition piece to the flowing concrete pipe (reducing chute) * Hydraulic chute support For further questions please contact our

Condition: used, mileage: 25,000 km, power: 335 kW (455.47 HP), first registration: 05/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: semi-automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #448 Mercedes-Benz Arocs 2546 L 6x2 with KRÜGER SSP 14-1 Body: KRÜGER Fahrzeugbau * Tank material: stainless steel 1.4301 Fedov Nu Shopfx Ag Repb * Approx. 14,000 liters (air volume) * Approx. 1,000 liters of flushing water volume (unpressurized) * Emptying via rear tipping Chassis: Mercedes-Benz Arocs * 2546 L 6x2 V 11 * Powershift 3 transmission * 455 hp/335 kW * EURO 6e * Fuel capacity: 510 l * Cab color: MB 9147 Arctic White * 2x LED rotating beacons on the cab * Rear view camera * Navigation * Air conditioning system CVS VacuStar W1600 vacuum system, approx. 1540 cm3/h at 400 mbar * Fully hydraulic, low-maintenance drive * Suction hose reel for 80 m DN 75, hydraulic Speck NP30/100-150 high-pressure system, 100.0 l/min at 150 bar * Fully hydraulic, low-maintenance drive * Small hydraulic high-pressure hose reel for approx. 80 m DN 13, hydraulic Special features: Lower and upper suction nozzles in DN 100, remote-controlled * Aluminum tool box on the right and hose tray on the left * Hand washing device * High-pressure gun and various holders * Soundproofing panel on the left * 6x LED ambient lighting * Radio remote control * Tiltable scrap box * Ladder with bracket and anchor points * Advertising board on the left and right Container * Rearview camera * Vice For further detailed information and/or pictures, please contact us directly. A large selection of other vehicles for PURCHASE or RENT can be found at: Subject to change, prior sale, and errors. The buyer is responsible for verifying the condition and features of the goods. The sale is subject to our terms and conditions and excludes any warranty.

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro2, loading space volume: 10 m³, Year of construction: 2024, Equipment: ABS, air conditioning, X TO GO?EUROMIX TO GO? OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES, FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN ACUTE DEMAND SITUATION. (SHORT-TERM CAPACITY EXTENSION OR REPLACEMENT INVESTMENT)Your advantages: Complete vehicles ready for immediate use (concrete mixer/tipper)Immediate availability directly from the manufacturer * body, assembly, commercial vehicle * Best price/performance ratio * Financing options * Trade-in of your old vehicles MAN TGS 41.400 BB 8x4 EURO 2 EuromixMTP EM 10m³ R - NEW NEW - withaut registration - without registration - Vehicle equipment * Engine D2066LF41 - 400 HP / 294 KW * Transmission ZF 16 S 223 OD ( manual gearbox ) * Tires front axle 315/80 R22,5 rear axle 315/80 R 22,5 * Front axle 8000kg - rear axle 13000 kg * Wheelbase 1795+2505+1400 mm * Cab M medium length * Air deflector to prevent dust swirling upwards * Cruise control * Air conditioning * Noise measure 80 dB (92/97EWG) * AP axle ratio rear axle AP HPD 1382/HP- * Air intake raised with dry air filter / pre-separator * Differential lock * Fuel tank 300l left * Three-piece steel bumper * MAN BrakeMatic ( electronic brake system ) * Disc brakes rear axle and front axle * Central locking * Sun visor EUROMIXMTP - Truck mixer body EM 10 R - Regular * Model: EM 10 R * Nominal volume 10m³ ready-mixed concrete * Mixing drum in regular design * Mixing drum in regular design made of material S355 * Mixing spirals in regular design made of material S420 MC * Optional ZF-P5300 gearbox * Hydraulic pump make Bosch Rexroth * Hydraulic motor made by Bosch Rexroth * Integrated oil cooling system * Mechanical mixing control and electrical start/stop * Compressed air water system Fpodpfx Agjvh Amko Reb * Water connection on the stand platform with hose line * Water filling line, with C-coupling on one side * Mixing drum with a service flap * Climbing ladder with platform * Rubber attachment on the hopper * Swivel-mounted, single-arm discharge chute made of steel * Wear plates in the feed hopper, discharge chute and swivel chute * Drum lock to secure the drum during maintenance work * Polyurethane primer * Weight approx. 3,965kg, deviations +/- 5% * With emergency stop function in accordance with EU safety technology * Steel mudguards above the rear axles * 2x extension gutters made of steel or plastic * Water system * Water tank 650l compressed air * Steel water tank * Shut-off valve mounted below the water tank in the filling line * Water connection ?C? coupling, * Operation & electrics * Mixer operation ? mechanical rear * Start-stop system (with EDC) * Geometric volume 17361 L * Water tank volume 11121 L * Inclination of the tank 11.3 * Length 7080 mm * Width 2300 mm * Height 2750 mm Special equipment: * Extension chute plastic - steel - aluminum * Plastic (or steel) folding chute * Retention flap Swivel chute * Plastic box * Stainless steel storage box * Unpressurized additive container * Pressurized additive container * Trowel holder * ? Drum lock * Reversing camera * LED working lights * EuromixMTP intelligent drum control ( electronic mixer control ) * Step on underride guard with grab handle * Water meter * Pressure gauge * Frame cover * Fire extinguisher * Holder for flowing concrete pipe (5 m long) * Transition piece to the flowing concrete pipe (reducing chute) * Hydraulic chute support For further questions please contact

Condition: new, power: 323 kW (439.16 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, loading space volume: 10 m³, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, X TO GO?EUROMIX TO GO? OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES, FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN ACUTE DEMAND SITUATION. (SHORT-TERM CAPACITY EXTENSION OR REPLACEMENT INVESTMENT)Your advantages: Complete vehicles ready for immediate use (concrete mixer/tipper)Immediate availability directly from the manufacturer * body, assembly, commercial vehicle * Best price/performance ratio * Financing options * Trade-in of your old vehicles MAN TGS 41.440 BB 8x4 EURO 6e EuromixMTP EM 10 L - NEW NEW - withaut registration - without registration - Vehicle equipment * MAN D2676 LFAZ diesel engine, 324 kW (440 hp) output, 2,250 Nm torque, Euro 6e * MAN TipMatic 12.28 OD - MAN TipMatic Efficiency drive program, up to 70,000 kg * 300 l tank capacity - 35 l tank capacity AdBlue tank * Maximum vehicle noise level, 79 dB in accordance with UN/ECE-R 51.03 * MAN EVBec high-performance engine brake, stepless * MAN EasyStart roll-away lock * Tires front axle 315/80R22.5 steering S+G * Tires rear axle 315/80R22.5 Drive S+G * Front axle, 9,200 kg, non-driven, straight, * Rear axle, 13,000 kg, AP axle with through drive, straight, * Axle ratio, i=3.63 * Suspension type leaf/leaf (BB) * Differential locks driven rear axles * Sun visor, in front of windshield * Bumper, steel, 3-part * Windshield wiper actuation, automatic, with rain sensor (automatic wiper) * Daytime running lights, LED - High beam assistant - Working lights on rear cab, * Exterior rear-view mirror, electrically adjustable, heated * Driver's comfort seat, air suspension - Armrests on driver's seat * Multifunction steering wheel, height and tilt adjustable * Preparation for Toll Collect toll collection system * Digital tachograph with remote communication (in accordance with DSRC), CONTINENTAL * Moon Grey color ambience for cab interior * Air conditioning, manual Fodpfx Aevh A Nxsg Ropb * Lifting roof, mechanical - Rear wall of cab, with window * 2 sockets, cab roof storage, 12 V and 24 V * Traction control system (ASR) * Cruise control (FGR cruise control) * LDW lane departure warning system * 7-inch MAN media system * MAN Advanced sound system - smartphone integration Truck mixer equipment: EUROMIXMTP - Truck mixer body EM 10 L - Lightweight construction * Model: EM 10 L * Nominal volume 10m³ ready-mixed concrete * Mixing drum in lightweight design * Mixing drum in lightweight design made of the material HARDOX S450 * Mixing spirals in lightweight design made of the material HARDOX S500 * ZF-P5300 gearbox * Hydraulic pump made by Bosch Rexroth * Hydraulic motor made by Bosch Rexroth * Integrated oil cooling system * Mechanical mixing control and electrical start/stop * Compressed air water system * Water connection on the stand platform with hose line * Water filling line, with C-coupling on one side * Mixing drum with a service flap * Climbing ladder with platform * Rubber attachment on the hopper * Swivel-mounted, single-arm discharge chute made of steel * Wear plates in the feed hopper, discharge chute and swivel chute * Drum lock to secure the drum during maintenance work * Polyurethane primer * Weight approx. 3,650 kg, deviations +/- 5% * With emergency stop function in accordance with EU safety technology * Steel wing above the rear axles * 2x extension chutes made of steel or plastic * Water system * Water tank 650l 500l 350l (compressed air) * Steel water tank * Stopcock underneath the water tank mounted in the filling line

Condition: new, overall weight: 44,000 kg, axle configuration: 3 axles, loading space volume: 12 m³, Year of construction: 2026, Equipment: ABS, X TO GO?EUROMIX TO GO? OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES, FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN ACUTE DEMAND SITUATION. (SHORT-TERM CAPACITY EXTENSION OR REPLACEMENT INVESTMENT)Your advantages: Complete vehicles ready for immediate use (concrete mixer/tipper)Immediate availability directly from the manufacturer * body, assembly, commercial vehicle * Best price/performance ratio * Financing options * Trade-in of your old vehicles EUROMIX MTP 12 cbm mixing trailer EUROMIX MTP - Truck mixer body EM 12 R - Regular * Model: EM 12 R * Nominal volume 12m³ ready-mixed concrete * Mixing drum in regular design * Mixing drum in regular design made of the material S355 * Mixing spirals in regular design made of material S420 MC * ZF P5300 gearbox * Hydraulic pump Bosch Rexroth * Hydraulic motor Bosch Rexroth * Integrated oil cooling system * Mechanical mixing control and electrical start/stop * Compressed air water system * Water connection on the stand platform with hose line * Water filling line, with C-coupling on one side * Mixing drum with a service flap * Climbing ladder with platform * Rubber attachment on the hopper * Swivel-mounted, single-arm discharge chute made of steel * Wear plates in the feed hopper, discharge chute and swivel chute * Drum lock to secure the drum during maintenance work * Polyurethane primer * Weight approx. 4,725 kg, deviations +/- 5% * With emergency stop function in accordance with EU safety technology * Steel wing above the rear axles * 2x extension chutes made of steel or plastic * Water system * 650l water tank (compressed air) * Steel water tank * Shut-off valve mounted below the water tank in the filling line * Water connection ?C? coupling, * Operation & electrics * Mixer operation ? mechanical at the rear * Start-stop system (with EDC) * Geometric volume 19420 L Fodpfsvh Ac Eex Ag Ropb * Water tank volume 12787L * Inclination of the tank 10.5 * Length 7545 mm * Width 2300 mm * Height 2765 mm Motor: FTP 55 kw Mounted on Euromix MTP 3-axle semi-trailer Vehicle type: EuromixMTP KIS 24 3-axle truck mixer chassis Axles with short link ratio (310/340) for prefabricated use 1 including Axle 9to SAF 22.5" disc brake, single tires for air suspension 3 including Track width of the axles: 2040 mm (standard dimension) 3 including Axle spacing approx. 1400 mm / 1400 mm 1 including EBS brake system 385/65 R 22.5 tires Plastic mudguards, 180 degrees, above each axle (for 3 axles) 1 including Chassis painted in RAL 9005 deep black 1 including CDP with zinc phosphating plus powder, maximum corrosion protection (only with 1 including color availability in powder) Tire pressure monitoring basic version, connected to CAN bus system of EBS 1 including 24 t telescopic support winch with single-sided operation and 1 including Half-round with base plate Axle loads: 24 000 kg (3 x 8000 kg, technical: 3x 9000 kg) 1 including Chassis length approx. 8570 mm 1 including For further questions please contact our team in the following languages. * We speak German * We speak English * Nous parlons français * Mówimy po polsku * ?? ????? ?? ????? * Govorimo Srpskohrvatski

Condition: new, power: 331 kW (450.03 HP), fuel type: diesel, overall weight: 41,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, loading space volume: 10 m³, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, X TO GO?EUROMIX TO GO? OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES, FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN ACUTE DEMAND SITUATION. (SHORT-TERM CAPACITY EXTENSION OR REPLACEMENT INVESTMENT)Your advantages:* immediately usable complete vehicles (concrete mixer/tipper)immediate availability directly from the manufacturer * body, assembly, commercial vehicle * Best price/performance ratio * Financing options * Trade-in of your old vehicles Fpsdpswppv Hjfx Ag Rjb Mercedes-Benz Arocs model generation 5 4145 8x4 EURO 6e EuromixMTP EM 10 L - NEW NEW - withaut registration - without registration - Vehicle equipment * Engine OM471, R6, 12.8 l, (451 hp), 2100 Nm Euro6e * Transmission G 330-12/ 11.63-0.77 Drive program offroad PowerShift 3 automatic * Front axle 7.5 t Rear axle Disc wheel 300 planetary, 13.4 t * Front axle tires 315/80 R 22.5 Rear axle tires 315/80 R 22.5 * Wheelbase 4550 mm * M cab Classic Space * Disc brakes, on VA and HA * 290 l tank, left, 735 x 700 x 750 mm, aluminum - AdBlue tank 25 l * Rear cab wall, with window - Tinted windshield * Light sensor - Daytime running lights * Roof hatch/roof ventilation flap * Exterior sun visor, transparent * Multifunction steering wheel * Multimedia cockpit * Air conditioning * Cruise control * Vehicle class N3G, off-road vehicle * Comofort locking system Truck mixer equipment * Model: EuromixMTP EM 10 L * Nominal volume 10m³ ready-mixed concrete * Mixing drum in lightweight design * Mixing drum in lightweight design made of HARDOX S450 material * Mixing spirals in lightweight design made of the material HARDOX S500 * ZF-P5300 gearbox * Hydraulic pump made by Bosch Rexroth * Hydraulic motor made by Bosch Rexroth * Integrated oil cooling system, make ASA * Mechanical mixing control and electrical start/stop * Compressed air water system * Water connection on the stand platform with hose line * Water filling line, with C-coupling on one side * Mixing drum with a service flap * Climbing ladder with platform * Rubber attachment on the hopper * Swivel-mounted, single-arm discharge chute made of steel * Wear plates in the feed hopper, discharge chute and swivel chute * Drum lock to secure the drum during maintenance work * Polyurethane primer * Weight approx. 3,650 kg, deviations +/- 5% * With emergency stop function in accordance with EU safety technology * Aluminum mudguards above the rear axles * 2x extension gutters made of steel or plastic * Water system * 500l water tank (compressed air) * Steel water tank * Shut-off valve mounted below the water tank in the filling line * Water connection ?C? coupling, * Operation & electrics * Mixer operation ? mechanical at the rear * Start-stop system (with EDC) * Geometric volume 17361 L * Water tank volume 11121 L * Inclination of the tank 11.3 * Length 7075 mm * Width 2300 mm * Height 2748 mm Special equipment: * Extension chute plastic - steel - aluminum * Plastic (or steel) folding chute * Retention flap Swivel chute * Plastic box * Stainless steel storage box * Unpressurized additive container * Pressurized additive container * Trowel holder * ? Drum lock * Reversing camera * LED working lights * EuromixMTP intelligent drum control ( electronic mixer control ) * Step on underride guard with handle * Water meter * Pressure gauge * Frame cover * Fire extinguisher * Holder for flowing concrete pipe (5 m long) * Transition piece to the flowing concrete pipe ( Reduz

Condition: used, mileage: 56,099 km, power: 316 kW (429.64 HP), first registration: 05/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 12/2025, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, X TO GO? EUROMIX TO GO? OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES AT OUR LOCATION IN PORTA WESTFALICA, GERMANY. IDEAL FOR CUSTOMERS WITH URGENT REQUIREMENTS (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT). Your benefits: - Fully operational complete vehicles (concrete mixers/tippers) ready for immediate use - Immediate availability directly from the manufacturer - Assembly, installation, commercial vehicle expertise - Best value for money - Financing options - Trade-in of your used vehicles VOLVO FMX 430 8X4 Euro 6 EuromixMTP EM 9 L Mileage: 56,099 km Tyres: 315/80R22.5 CONTINENTAL HSC1 ED Roof hatch and emergency exit, manual opening (tinted glass) Basic info and media package Digital tachograph 4.0 Gross combination weight, technical: 44 t Diesel engine 10.8 l, 439 HP/323 kW, 2,091 Nm I-Shift AT2612F, automated 12-speed transmission (direct drive), max input torque: 2,652 Nm Wheelbase: 4,350 mm EUROMIX MTP - Concrete Mixer Superstructure EM 9 L, Model: EM 9 L - Nominal capacity: 9m³ ready-mix concrete - Lightweight mixing drum - Mixing drum made of HARDOX S450 lightweight material - Mixing spirals made of HARDOX S500 lightweight material - Gearbox: ZF-P5300 - Hydraulic pump: Bosch Rexroth - Hydraulic motor: Bosch Rexroth - Integrated oil cooling system: ASA - Mixing control: mechanical, with electric start-stop function - Compressed air water system - Water connection at platform with hose - Water filling pipe with C-coupling, one-sided - Drum with service hatch - Climbing ladder with working platform - Rubber insert on the charging funnel - Swiveling single-arm discharge chute (steel) Fpjdpfx Aexw Dvzjg Rjb - Wear plates in charging funnel, discharge trough, and swiveling chute - Drum locking mechanism for safe maintenance - Polyurethane primer - Weight approx. 3,425 kg, tolerance +/- 5% - Emergency stop function according to EU safety standards - Aluminium fenders over the rear axles - 2x extension chutes made of steel or plastic - Water system - 500 l water tank (compressed air) - Steel water tank - Shut-off valve under water tank, mounted in fill line - Water connection with C-coupling - Operation & electrics: - Mixer operated mechanically from the rear - Start-stop system (with EDC) - Geometric volume: 15,120 L - Water tank volume: 9,745 L - Tank inclination: 12.3° - Length: 6,785 mm - Width: 2,300 mm - Height: 2,693 mm

Condition: new, power: 382 kW (519.37 HP), overall weight: 37,000 kg, fuel type: diesel, color: white, axle configuration: > 3 axles, gearing type: automatic, loading space volume: 10 m³, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, X TO GO?EUROMIX TO GO? OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES, FROM OUR LOCATION IN PORTA WESTFALICA/GERMANY. FOR ALL CUSTOMERS WHO ARE IN AN ACUTE DEMAND SITUATION. (SHORT-TERM CAPACITY EXTENSION OR REPLACEMENT INVESTMENT)Your advantages: Complete vehicles ready for immediate use (concrete mixer/tipper)Immediate availability directly from the manufacturer * body, assembly, commercial vehicle * Best price/performance ratio * Financing options * Trade-in of your old vehicles Fsdpfx Agsvm R Hps Rspb MAN TGS 35.520 BB 8x4 EURO 6e EuromixMTP EM 10 L - NEW NEW - withaut registration - without registration - Vehicle equipment: * MAN D2676 LFAX diesel engine, 382 kW (520 hp) output, 2,650 Nm torque, Euro 6e * MAN TipMatic 12.28 OD gearbox - MAN TipMatic Efficiency drive program, up to 70,000 kg * Optional front axle tires 385/65R22.5 Steering S+G TL * Optional rear axle tires 315/80R22.5 Drive S+G TL * Front axle, 9,200 kg, non-driven, straight, steered * Rear axle HPD-1382, 13,000 kg, AP axle with through drive, straight, not steered, * Axle ratio, i=3.63 * Wheelbase 1795+2505+1400 mm * Axle ratio, i=3.63 * Daytime running lights, LED * Multifunction steering wheel, height and tilt adjustable * Air conditioning, manual * Storage box, center area, rear * Cruise control (cruise control FGR) * MAN Media System Advanced Navigation 7-inch * Trailer coupling on rear cross member, ROCKINGER type 400 G 150A * M medium-length cab * Air baffle to prevent dust swirling upwards * Maximum vehicle noise level, 79 dB according to UN/ECE-R 51.03 * Air intake raised with dry air filter / pre-separator * Differential lock * Fuel tank 300l left and 35l AdBlue * Three-piece steel bumper * High-performance MAN EVBec engine brake, steppable * Central locking * Rear cab wall with 2 windows * Sun visor * Driver's comfort seat with air suspension * AUX-in/ USB in the dashboard Truck mixer equipment: EUROMIXMTP - Truck mixer body EM 10 L - Lightweight construction * Model: EM 10 L * Nominal volume 10m³ ready-mixed concrete * Mixing drum in lightweight design * Mixing drum in lightweight design made of the material HARDOX S450 * Mixing spirals in lightweight design made of the material HARDOX S500 * ZF-P5300 gearbox * Hydraulic pump made by Bosch Rexroth * Hydraulic motor made by Bosch Rexroth * Integrated oil cooling system * Mechanical mixing control and electrical start/stop * Compressed air water system * Water connection on the stand platform with hose line * Water filling line, with C-coupling on one side * Mixing drum with a service flap * Climbing ladder with platform * Rubber attachment on the hopper * Swivel-mounted, single-arm discharge chute made of steel * Wear plates in the feed hopper, discharge chute and swivel chute * Drum lock to secure the drum during maintenance work * Polyurethane primer * Weight approx. 3,650 kg, deviations +/- 5% * With emergency stop function in accordance with EU safety technology * Steel wing above the rear axles * 2x extension chutes made of steel or plastic * Water system * Water tank 650l 500l 350l (compressed air) * Steel water tank * Shut-off valve mounted below the water tank in the filling line * Water connection ?C? coupling, * Operation & electrics * Mixer operation ? mechanical at the rear * Start-stop system (with EDC) * Geometric volume 17361 L * Water tank volume 11121 L * Inclination of the tank 11.3 * Length 7075 mm * Width 2300

Condition: new, overall weight: 37,000 kg, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, X TO GO?EUROMIX TO GO? OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES FROM OUR LOCATION IN PORTA WESTFALICA, GERMANY. FOR ALL CUSTOMERS IN AN ACUTE NEED. (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT) Your advantages: Ready-to-use complete vehicles (concrete mixer/tipper) Immediate availability directly from the manufacturer Construction, assembly, commercial vehicle - Best price/performance ratio Financing options Trade-in of your old vehicles EUROMIX MTP 10 m³ mixer trailer (Rental available) * - New * - 2-axle * - SAF axles * - 1x lift axle - ABS air suspension * - Tires 385/65 R22.5 * - Total weight approx. 36,000 kg EUROMIX MTP - Truck mixer body EM 10 L - Lightweight construction * Model: EM 10 L * Nominal volume 10 m³ ready-mixed concrete * Lightweight mixing drum * Lightweight mixing drum made of HARDOX material S450 * Lightweight mixing augers made of HARDOX S500 material * ZF P5300 gearbox * Bosch Rexroth hydraulic pump * Bosch Rexroth hydraulic motor * Integrated oil cooling system * Mechanical mixing control and electric start/stop * Compressed air/water system * Water connection on the platform with hose line * Water filling line, with C-coupling on one side * Mixing drum with a service hatch * Step ladder with platform * Rubber attachment on the hopper * Pivoting, single-arm steel discharge chute * Wear plates in the hopper, discharge bowl, and swivel cord * Drum lock to secure the drum during maintenance work * Polyurethane primer * Weight approx. 3,650 kg, deviations +/- 5% * With emergency stop function in accordance with EU safety technology * Steel wings above the rear axles * 2x extension chutes made of steel or plastic * Water system * Water tank 500L (compressed air) * Steel water tank * Shut-off valve mounted below the water tank in the filling line * Water connection: "C" coupling * Controls & Electrical System Fodsvh A Afopfx Ag Rjpb * Mechanical mixer control at the rear * Start-stop system (for EDC) * Geometric volume 17361 L * Water tank volume 11121 L * Tank inclination 11.3 * Length 7075 mm * Width 2300 mm * Height 2748 mm Special equipment: * Extension chute, plastic, steel, aluminum * Folding chute, plastic (or steel) * Retaining flap, pivoting chute * Plastic box * Stainless steel storage box * Non-pressurized additive tank * Pressurized additive tank * Trowel holder * ? Drum lock * Rearview camera * LED work lights * EuromixMTP intelligent drum control (electronic truck mixer control) * Underrun protection step with grab handle * Water meter * Pressure gauge * Frame cover * Fire extinguisher * Bracket for flowable concrete pipe (5 m long) * Transition piece for flowable concrete pipe (reducing chute) * Hydraulic chute support For further questions, our team is available in the following languages: * We speak German * We speak English * We speak French * We speak Polish * ?? ????? ?? ????? * We speak Srpskohrvatski

Condition: new, power: 323 kW (439.16 HP), fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space volume: 7 m³, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, X TO GO? EUROMIX TO GO? OFFERS YOU IMMEDIATELY AVAILABLE NEW STOCK VEHICLES FROM OUR LOCATION IN PORTA WESTFALICA, GERMANY. FOR ALL CUSTOMERS IN URGENT NEED (SHORT-TERM CAPACITY EXPANSION OR REPLACEMENT INVESTMENT). Your benefits: • Ready-for-use complete vehicles (concrete mixer/tipper) • Immediate availability directly from the manufacturer • Assembly, installation, commercial vehicle • Best price-performance ratio • Financing options • Trade-in of your used vehicles MAN 33.440 BB 6x4 EURO 6e Euromix MTP EM 7 L Concrete Mixer (Also available as 6x6) - NEW - without registration - * (RENTAL AVAILABLE) Vehicle Equipment: • MAN D2676 LFAZ diesel engine, 324 kW (440 hp) output, 2,250 Nm torque, Euro 6e • MAN TipMatic 12.28 OD gearbox - MAN TipMatic Offroad driving program, up to 70,000 kg • Front axle tires, choice of 315/80R22.5 steer-S+G TL • Rear axle tires, choice of 315/80R22.5 drive-S+G • Front axle, 9,000 kg, AP axle non-driven, straight, steered • Rear axle HP-1352, 13,000 kg, AP axle non-driven, straight, non-steered • Axle ratio i=3.63 • 3,300 mm main wheelbase • Suspension type leaf/leaf (BB) • Trailer hitch on rear crossmember, RINGFEDER type RF50 A • MAN Media System Advanced Navigation 7-inch • LED daytime running lights • Multifunction steering wheel, height and tilt adjustable • M-length cab (mid-length) • Air deflector to reduce dust turbulence • Cruise control (FGR) • Air conditioning • Noise reduction to 80 dB (92/97EWG) • Raised air intake with dry air filter / pre-separator • Differential lock • Fuel tank 300l left and 35l AdBlue • Three-part steel bumper • MAN BrakeMatic (electronic brake system) • Central locking • Sun visor • Air-sprung comfort driver seat • AUX-in/USB in dashboard EUROMIX MTP - Mixer Superstructure EM 7 L • Model: EM 7 L • Nominal capacity 7m³ ready-mix concrete • Lightweight mixer drum design • Mixer drum in lightweight design made of HARDOX S450 • Mixing spirals in lightweight design made of HARDOX S500 • Gearbox make ZF-P5300 • Hydraulic pump make Bosch Rexroth • Hydraulic motor make Bosch Rexroth • Integrated oil cooling system make ASA • Mixing control mechanical and start-stop electrical • Compressed-air water system • Water connection on platform with hose line • Water filling pipe on one side with C-coupling • Mixer drum with service hatch • Access ladder with platform • Rubber extension on charging hopper Fpodpfsw N U Hvjx Ag Rob • Swiveling, single-arm discharge chute made of steel • Wear plates in charging hopper, discharge tray, and swivel chute • Drum locking for securing drum during maintenance • Polyurethane primer • Weight approx. 3,120 kg, tolerance +/- 5% • With emergency stop function according to EU safety standards • Aluminum mudguards over rear axles • 2x extension chutes, steel or plastic • Water system • Water tank 500L (compressed air) • Steel water tank • Shut-off valve mounted below the water tank in the filling line • Water connection 'C'-coupling • Controls & electrics • Mixer controls – mechanical, rear • Start-stop system (for EDC) • Geometric volume 12,000 L • Water tank volume 7,310 L • Tank inclination 13.6° • Length 6041 mm • Width 2300 mm • Height 2628 mm Optional equipment: • Extension chute plastic – steel – aluminum

Condition: new, Year of construction: 2026, EuromixMTP - Roll-off tipper - Superstructures - Truck mixer EUROMIX MTP - Truck mixer superstructure EM 5 L lightweight construction Model: EM 5 L * Nominal volume 5m³ ready-mixed concrete * Mixing drum in lightweight construction * Mixing drum in lightweight design made of HARDOX S450 * Mixing spirals in lightweight design made of HARDOX S50 * Gearbox made by ZF P4300 * Hydraulic pump Bosch Rexroth * Hydraulic motor Bosch Rexroth * Integrated oil cooling system * Mechanical mixing control and electric start/stop * Compressed air water system * Water connection on the stand platform with hose line * Water filling line, one-sided with C-coupling * Mixing drum with a service flap * Step ladder with stand platform * Rubber attachment on the filling funnel * Swiveling, single-arm discharge chute made of steel * Wear plates in the filling funnel, discharge bowl and swivel cord Fpjdpfx Agjvv D E Rj Reb * Drum lock to secure the drum during maintenance work * Polyurethane primer * with emergency stop function in accordance with EU safety technology * steel wings over the rear axles * 2x extension gutters made of steel or plastic * Water system * 500l water tank (compressed air) * Steel water tank * Shut-off valve mounted below the water tank in the filling line * Water connection "C" coupling, * Operation & electrics * Mixer operation - mechanical rear * Start-stop system (with EDC If you have any further questions, our team is available in the following languages. * We speak German * We speak English * Nous parlons français * Mówimy po polsku * ?? ????? ????? ????? * Govorimo Srpskohrvatski