Used Laminator for sale (849)

Condition: excellent (used), Solventless laminator, Italian brand OLYMPIA, model year 2019, with a width of 1300 mm; it includes a FERRARINI corona treater and a two-component adhesive applicator. Iedpfx Asziq D Ajhhotk

Condition: used, machine/vehicle number: 008276, Position 1: Planers/Moulding Machines KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Position 2: Panel Feeding and Loading KENTWOOD-FEEDMAC31+M200+FEEDMAC33 Iodpfx Ahex A Tbwehetk Position 3: Panel Stacking and Offloading KENTWOOD-FEEDMAC31+M200+FEEDMAC33

Condition: used, Year of construction: 2010, Year: 2010 Condition: very good- after overhaul Itsdpfxoy Exb Dj Ahhsk Foliant Gulliver C 520 A - automatic loading and separation - maximum format: 520 mm (width) x 720 mm (length) - speed regulation 0 – 15 m / min - temperature regulation 80 – 140°C - cars vacuum belt loader - automatic separator - pneumatic pressure

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Ijdpfxsvy Aips Ahhotk Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: excellent (used), Year of construction: 2017, The FOLIANT Pollux 760 SF High-Speed Compact Industrial Laminating Machine Year: 2017 Maximum sheet size: 760 x 1100 mm Minimum sheet size: 320 x 250 mm Maximum speed: 50 m/min Paper weight: 115 - 600 gsm Temperature control: 80 - 140 °C PALLET STACKER Itjdpszdyqzsfx Ahhjk FILM LOADER Touch screen controls

Condition: good (used), functionality: fully functional, High-frequency press for glulam beams up to 22 meters maximum pressing width: 1300 mm Itodpow A Hk Ijfx Ahhsk maximum pressing thickness: 300 mm loading conveyor 3,000 mm press with section-by-section polymerization (3 meters each)

Year of construction: 2024, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2024 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 swivel wheels with brakes Fully enclosed machine (compliant with 2006/42/EC) Access secured by coded magnetic sensors Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Itodpfx Ahey D Ugyohsk Convoyage : Tapis d’entrée - Bande NEOBELTING silicone blanc - Température max : 90°C en continu - Vitesse : 17 m/min - Motorisation : 0,37 kW – triphasé 400V - Option fournie avec la machine : guidage produits par peigne inox + rouleaux presseurs (voir photo) Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - Hardened and ground steel blades (Z30C13 – 40/42 HRC) - Rotation speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit options: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Laminating / rolling function - Hollow stainless steel roller, Ø140 x 350 mm - Motor: 0.12 kW - Speed: 29 m/min - Precise gap adjustment (1 to 30 mm) - Adjustable anti-clogging scraper Conveyor system: Intermediate conveyor - HABASIT belt, type WVT-140 - Speed: 29 m/min - Motor: 0.18 kW - Stainless steel drum, Ø44 mm - Tension and position adjustment Power supply: Three-phase 400V – 50 Hz SIEMENS G120C frequency converters (x5) SIEMENS 7-inch operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Technical documentation available

Year of construction: 2005, condition: used, Serial number: MMFE 1015393 Rebuilt: 2021 by Muller Martini-8000 speed Manual feed station Number of stations: 12 Collating machine: ASAC auto set up Type: 3693/ 24” Self-adjusting caliper control Signature recognition system: ASIR Binding machine type: 3028 Number of binding machine clamps: 31 Touchscreen controller Milling station 2 separate roughing stations Hot-melt spine gluer with freestanding preheater Itodpfx Ajzuw Hnohhok Hot-melt side gluer with freestanding preheater PUR gluing system with preheater 2 Nipping stations Conveyor belt system to link Müller Martini Merit S three-knife trimmer with spare knives Overall dimensions of the setup: approximately 7,000/11,000 x 32,000 x 2,500 mm Notes: Must be professionally disassembled and loaded by the buyer Online auction of high-quality printing, finishing, bookbinding, and paper-processing machinery from a modern graphic arts production environment, including a HEIDELBERG Varimatrix 105 CS automatic die-cutting and embossing machine, a HEIDELBERG Speedmaster SM 52-5 Anicolor 5-color offset press, a BOBST BRAUSSE Bora 1050 E die-cutting machine with stripping function, 2 HEIDELBERG Stitchmaster ST450 professional brochure production lines, a HORIZON StitchLiner 6000 fully automatic saddle-stitching line, HEIDELBERG Stahl TH 66 / TH 82 and XT 94 folding machines, a MÜLLER MARTINI Bolero automated high-speed line for collating and perfect binding with PUR and hot melt, POLAR 137 XT PACE and POLAR 137 XT AT XT Plus Autotrim fully automatic cutting lines, POLAR 115 XT and 92 ED cutting machines, AGFA Avalon CTP plate setters, MÜLLER MARTINI 1571 automated collator, PALAMIDES Delta 703 bundling and strapping machines, NEOPOST DS600i inserter, the EPSON Super Color T5200 large-format printer, the TECNOMAC Evolution 76 B1 laminator, the HEIDELBERG GTO 52 with Alcolor, various HEIDELBERG sheetfed presses, stack lifts, accessories, and graphic peripherals, etc. The online auction opens Friday 14 August and closes Thursday 17 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Thursday 3 September - Thursday 10 September - Monday 14 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cutting height (max.): 50 mm, cutting width (max.): 3,300 mm, saw blade diameter: 300 mm, Equipment: documentation/manual, type plate available, For sale: SIGMA PRIMA 50 panel saw (2016) with label printer – precision, power, and reliability in one! We offer a professional Sigma Prima 50 panel saw from 2016 – an ideal solution for carpentry workshops, furniture factories, and companies involved in the production of wood-based panel components. Why choose it? 1. Highest level of cutting precision – a stable structure and high-quality guides guarantee perfectly straight and repeatable cuts. 2. Powerful and efficient motor – easily handles MDF, particleboard, laminate, or solid wood. 3. Large panel table – comfortable processing even of large-format panels. 4. Scoring saw – perfect edge finishing without chipping. 5. Year of manufacture 2016 – modern design, proven and ready for work. 6. Connected label printer, ensuring that each component is accurately labeled, preventing errors during assembly. Ideal for: 1. Production of custom-made furniture 2. Serial processing of panels Iedezqc E Iepfx Ahhstk 3. Companies producing prefabricated houses 4. Precision carpentry work 5. Businesses that value quality and efficiency The machine is in good working order, robust, durable, and designed for intensive use. It is an investment that will quickly pay for itself thanks to increased efficiency and accuracy. Contact us for more information, photos, or to arrange a viewing. Don't miss this opportunity – a professional panel saw in very good condition is a guarantee of quality for years to come! We purchased a new model, so this one is being sold. Price: 96,500 PLN net Tel. 666-609-957

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, total length: 9,000 mm, working height: 120 mm, For sale: BARBERAN PUR-33-L profile wrapping machine (year 2010) – machine for laminating elements with decorative foil using PUR hot-melt adhesive (hot gluing). The machine features a single foil feeder, automatic control, and an added antistatic corona system (reduces electrostatic charges – improves foil feed stability). Technical specifications: Model: BARBERAN PUR-33-L Year of manufacture: 2010 Machine length: approx. 9 m Max. element width: 120 mm Feed speed: up to 45 m/min Power supply: 400V / 50Hz Foil feeder: 1 unit Equipment / additional features: Antistatic corona (retrofitted) – neutralizes foil static Iedpoyw Nxksfx Ahhotk Printer – enables edge printing (e.g. strip name / operator / description) Glue melter with approx. 60L capacity – allows extended operation without interruption. Important: The machine applies PUR adhesive using hot-melt technology Heaters are NOT included in the set.

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. Iodpfx Ahjy Um T Hshjtk 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Videos available on request.

Condition: used, machine/vehicle number: 007676, Position 1: Brushing Machines BARBERAN-ECO-1700-H-SI Position 2: Gluing Machine BARBERAN-ECO-1700-H-SI Position 3: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Position 4: Continuous Cycle Presses BARBERAN-ECO-1700-H-SI Iedpfowuzzrox Ahhstk

Year of construction: 2015, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: M15090L, For sale is a high-quality vacuum membrane press from Columbus Presstechnology. Type: Multimat Sonder Model: M15090L Year of manufacture: 2015 The machine is in good, well-maintained condition and is immediately ready for operation. Technical data: Voltage: 400 V / 50 Hz Power: 19 kW Suction capacity: 40 m³/h Vacuum: up to -0.9 bar Temperature range: up to 140 °C Equipment / Condition: Fully functional and ready for use Robust industrial design Itedpfx Ajy I Ugujhhok Membrane included (used but functional condition) User-friendly controls Ideal for woodworking, furniture, or plastics processing Applications: Veneering Foil lamination Mold making / plastics processing Prototype production Inspection is possible – the machine is ready for use.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 12.30 315/2, working width: 1,000 mm, Equipment: documentation/manual, Tünkers Laminating Machine Type Vorwärts 1100 Fully automatic, both carrier sheet and cover sheet are processed automatically. Suitable for a wide range of applications: corrugated board, cardboard, semi-board, fabrics, films Itjdpfx Ahey D D A Dehek Max. format 1000x1400 mm Min. format 200x280 mm Carrier material weight approx. 250 g/m² – approx. 5 mm Cover material weight approx. 80 g/m² – approx. 800 g/m² Up to 2,000 laminating cycles per hour Documentation & circuit diagrams available. Incoterm FCA Oberhasli, Incoterms® 2020 – loaded on truck The machine is in operation and can be inspected.

Year of construction: 2016, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH 360 Year: 2016 Width: 36 cm Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Conveyor: Entry conveyor belt – Motor: 0.25 kW – three-phase 400V – Product guidance via stainless steel comb Conveyor: Outfeed belt – Motor: 0.37 kW – three-phase 400V – Integrated air blow-off ramp Cutting unit – Cutting wheel Ø350 mm – 3 blade holders (45° and 90°) – 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – Option to add more – Rotation speed: 72 rpm Itjdpfey Hdqajx Ahhok – Motor: 0.37 kW – three-phase 400V – Guide with stainless steel bearings – Cutting kit available: 90° and 45° Product orientation kit: 1 symmetrical set, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function – Non-motorised stainless steel roller, Ø140 x 350 mm – Gap adjustment: manual – Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 3,220 h, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,860 mm, load center: 800 mm, fuel type: electric, mast type: duplex, battery capacity: 930 Ah, battery voltage: 48 V, fork carriage width: 2,840 mm, fork length: 1,600 mm, ground clearance: 130 mm, turning radius (outer): 1,950 mm, total height: 2,710 mm, total length: 2,840 mm, total width: 2,670 mm, color: white, Equipment: cabin, Electric four-way reach truck HUBTEX MQ 30, first owner, in very well-maintained condition: – Model MQ 30 AC / Series 2125-EL (larger model series) – Designed for the transport and stacking of wood-based panels – Load capacity 3000 kg at LSP 800 mm to H3 5000 mm – Load capacity 2670 kg at LSP 1050 mm to H3 5000 mm – NB = 1600 mm useful width – MV = 1700 mm mast extension – RB = 2670 mm frame width – b1 = 1040 + 30 mm front dimension – b2 = 1070 mm front dimension with reinforced fork carrier – RL = 2440 mm frame length – KÜ = 180 mm cab overhang – GL = 2840 mm overall length over fork carrier – Ra = 1340 mm wheel arm clearance – SH = 2500 mm height above driver protection roof (+300 mm) – Rh = 500 mm height wheel arms – BF = 130 mm ground clearance lower mast – Wa = 1950 mm turning radius – 3-stage lift mast H 60 TIL (very stable) – H1 = 2707 mm height of lift mast retracted – H2 = 1867 mm free lift – H3 = 5000 mm lift height (top of fork tines) – H4 = 5840 mm height of lift mast extended – VH = 840 mm height fork carrier – Intermediate lift limitation at H3 = 3900 mm – Long load fork carrier Type II, GTL = 2840 mm – Fork carrier in low and reinforced design – Fork adjustment hydraulically from 560 to 2840 mm (adjustable forks) – Fork tilt hydraulically +5 / –3 degrees – Fork tines (pair) length 1600 mm – Fork cross-section 50 x 150 mm – Multi-directional steering system H4 electronically controlled – 4 steering programs with longitudinal/lateral travel and circular/diagonal travel – Service brake as an automatic regenerative brake – Parking brake as an electro-magnetic parking brake – 4-wheel chassis with two vertical motors and heavy-duty load wheels – 2-piece swing axle with mechanical level compensation Iodpfjzugt Rox Ahhotk – Tires, drive side 2 x 457 x 200 mm Super-Elastic – Tires, load side 4 x 381 x 127 mm solid rubber – Motor control with three-phase motor and inverter – Drive power 2 x 4.0 kW – Working hydraulics with proportional valve technology, continuously adjustable – Lift power 14.0 kW – Steering power 4.0 kW – Operation via multi-function joystick – Driver's cabin as a lateral seat cabin Q850 with 830 x 850 mm – Entry and exit on the racking aisle side – Driver protection roof with laminated safety glass – Safety glass on the load side, front, and battery side – 2 work spotlights on the cabin roof – Comfort seat, vibration-damped, adjustable in multiple ways – On-board computer Hubtex HIT 2 – Paint finish RAL 9002 grey-white and RAL 7021 black-grey – Battery 48V 6EPzS 930 Ah – Battery charger D400G48/125 for 12-14 hours charging time – Aquamatic and filling station – Battery 48V 6PzS 930 Ah with tray renewed in 03/2021 – Year of manufacture 2006, operating hours original 3220 h – First owner, very well-maintained condition – Truck always stored in a heated hall – Regular maintenance by Hubtex – Last maintenance in 08/2025 at 3100 h – New maintenance possible upon agreement – Application was for feeding a wood-based panel saw – Sale due to automation of the panel saw – Inspection and test run possible upon agreement – Sale from location Karlsruhe / Southern Germany

Year of construction: 2006, condition: good (used), Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Itsdpfjpaiaisx Ahhek Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 70432, For sale is a fully functional laminating machine, including 2 feed conveyor belts, model GH2000/400, and a shrink tunnel, model Minipack Tunnel50 Twin GT. Viewings can be arranged in Vienna on weekdays. Itjdpfx Ahozn I A Hehsk

Year of construction: 2016, condition: excellent (used), MASA hydraulic press for slabs Year: 2016 Type: Uni 2000-600/7, 7 stations, pressing force 600 tons Moulds: 60x60 cm, max thickness 10 cm Transport system (finger car) to curing chamber 3,000 steel curing pallets; 250 galvanized control conveyors 8 curing chambers with ventilation and steam pipe Pallet brushing unit with filtering unit, max width 400 to 600 mm Manual packaging system REX-2000 calibrating station, 2 workstations 6-head grinding machine Kraft Energy curing system Itodeyhlkpjpfx Ahhok Chamfer grinding machine, 12 m drying line, 8 fans Complete Teka concrete plant (2 mixers: 750 L and 325 L) with 8-compartment storage bin with extraction belt, bucket weigher on load cell External storage silo with 50-meter belt conveyor. Reversible belt on top 8-bin storage hopper Laminating system for special tiles for bonding steel sheet under the slab Stacking device for curing chambers

Condition: good (used), functionality: fully functional, mileage: 13,187 km, power: 140 kW (190.35 HP), gearing type: automatic, fuel type: diesel, Year of construction: 2007, operating hours: 13,187 h, Wheel loader Liebherr L556-454, 2plus2 configuration, year of manufacture 2007. Equipped with Liebherr engine D934L A6 delivering 140 kW, automatic transmission, and self-locking differentials on both axles. The stepless 2plus2 drive system and wet multi-disc brakes on both axles ensure high traction and operational safety. The machine features single-lever control, air conditioning, adjustable steering column, and a driver's suspension seat with LFD damping system for enhanced operator comfort. The cab is fitted with a laminated safety glass windscreen, green/tinted version. Additionally, there are 4 working lights at the front and 2 reversing lights. Attachments and special equipment: Itedpfx Aoy Dt A Tohhek - 2600 mm lift mast - Piston rod protection for 2600 mm lift mast - 4 Michelin tyres 23.5 R25 XHA*L3 - Quick coupler - Single rail guide for Z-kinematics / 2600 mm lift mast - Single front hydraulic auxiliary circuit and additional hydraulic swing function - Automatic central lubrication system with electric pump and electronic control - Reversible fan drive - Electronic auxiliary module with keypad - Top-Air pre-cleaner - Control lever lift lock for add-on lever set - Operator seat with pneumatic suspension Grammer 24V - Radio installation kit 24V - Rear view monitoring with camera and monitor - German/Luxembourg version - Operating manual GT list A powerful and comprehensively equipped wheel loader, suitable for demanding tasks in construction, recycling, industrial applications, and material handling. Sale is made without warranty and liability.

Condition: good (used), Year of construction: 2002, Rondo Laminating and Shaping Line for Yeast Pastries - Smartline and Compactline model - used - year of manufacture: 2002 - length: 15 meters - without tools Ijdpfxow Nx S Ns Ahhjtk - components: satellite calibrator, dough rolling cylinder, standard calibrator, work table, cutting station, guillotine, discharge table - machine in production - collection from warehouse / shipping option - price on request

Condition: used, mileage: 2,46,000 km, power: 75 kW (101.97 HP), first registration: 04/2013, fuel type: diesel, overall weight: 2,177 kg, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 2, Year of construction: 2013, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, VW Caddy 1.6 TDI panel van, automatic transmission German vehicle, one owner. Auxiliary heater Special features: Audio system RCD 210 MP3 (radio/CD player), antenna, left exterior mirror, lockable and illuminated glove compartment, high cargo area partition with window, spare wheel with road tires (steel), front seat heating Additional features: Driver's airbag, traction control (ASR), aspherical left exterior mirror, electrically adjustable and heated exterior mirrors, convex right exterior mirror, floor covering in the front (rubber), EcoProfi, electronic differential lock (EDS), laminated windshield, vehicle without start/stop system, tailgate with glazing, interior filter: dust and pollen filter, body/structure: panel van, steering column (steering wheel) mechanically adjustable, height/longitudinal adjustment, center console, engine 1.6 L - 75 kW TDI, non-smoker package, wheelbase 2681 mm, low emissions according to Euro 5 emission standard, sliding door on the right, driver's seat height adjustable, seat cover/upholstery: fabric, steel rims 6x15, first aid kit and warning triangle, heat-insulating tinted green glazing * Sales consultant information * + * AN APPOINTMENT IS REQUIRED FOR A TEST DRIVE OR INSPECTION * + * Trade-in and financing possible. Itedpfx Ahszvk Hkehek * Errors in input are not excluded. * Please check the equipment on the vehicle. Subject to errors, input errors and prior sale.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, overall weight: 392 kg, total width: 1,500 mm, total length: 4,000 mm, cutting height (max.): 250 mm, type of input current: three-phase, space requirement length: 4,000 mm, space requirement width: 1,500 mm, rotational speed (max.): 6,670 rpm, rotational speed (min.): 6,670 rpm, spindle speed (min.): 6,670 rpm, spindle speed (max.): 6,670 rpm, power of the milling unit: 6,000 W, length stop: 3,000 mm, working width: 500 mm, working height: 250 mm, input voltage: 400 V, power: 6 kW (8.16 HP), Mafell ZAF 250 - EXCELLENT CONDITION Scope of delivery: -1 milling head, complete with reversible blade; -1 support table Maximum wood dimensions (W x H) rectangular: 500 x 250 mm Maximum wood dimensions (W x H) 60°: 220 x 250 mm Length of the support with scale: 3000 mm Feed rate: 0.9 - 2.2 m/s Installation area: 1.5 x 4 m Nominal idling speed: 6670 rpm Nominal power: 6000 W Weight: 392.1 kg Three-phase motor: 400 V / 50 Hz Product details: -With the ZAF 250 Vario, all tenon shapes can be produced quickly and accurately, efficiently and with a perfect fit. - Straight tenons, angled tenons, corner and mortise joints - the compact ZAF 250 Vario is the right choice. - Using a stop, the exact length scale can be adjusted. -The milling tool, specially developed for the ZAF 250, can be quickly adapted to different tenon lengths and for milling joints. -The ZAF 250 Vario has precise adjustment options and a clear control panel. Thanks to the built-in laser, you can position the wood accurately. Result: Milling with millimeter precision in any type of wood! -After the tenon geometry has been set, the milling head automatically follows the shape of the tenon and delivers the desired tenon - including surface milling, chamfering and beveling. -The ZAF 250 Vario has an adjustable feed rate for applications in hardwoods. Application area: -Tenon and mortise milling up to 60° -Material usage, e.g.: solid wood and glued laminated timber Advantages: Iedpjzbnl Aefx Ahhetk -Significant time saving - due to simple and quick adjustment of length, angle and tenon and mortise dimensions. - Maximum wood dimensions 500 x 250 mm at 0° and 220 x 250 mm at 60°. -Minimal space requirement – thanks to the swiveling head, the workpiece always remains in the same position. -No wood waste - fully dust-extractable.

Condition: used, functionality: fully functional, With this listing, you are purchasing a used “GMP Qtopic-380 Auto” laminating machine Item for Sale: 1 x GMP Qtopic-380 Auto We can easily configure the machine to meet your specific needs. Please feel free to contact us! Condition: This listing is for a used machine, which may show signs of wear (minor scratches or discoloration). Isdpfx Ajzmtkmehhetk The unit has been tested to ensure it is in working order Packaging and Shipping: You are welcome to view the unit during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping are available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, please feel free to contact us directly.

Condition: excellent (used), Super offer: NORMECCANICA SUPER SIMPLEX rolling machine from 2018, 1300 mm wide. Itsdpfxozaqwxe Ahhsk