Used Laser Cutting Machine for sale (67,327)

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton) Rsdpfxexvwcxj Airjch

Condition: good (used), Arm length: 2x1800mm Rcsdpotxpgvefx Airsh

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0100A0637, laser type: CO₂ laser, laser source manufacturer: trumpf, laser power: 2,000 W, input voltage: 24 V, input current: 100 A, input frequency: 4,000 Hz, type of input current: three-phase, type of cooling: water, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Trumpf Trumatic 6000, manufactured in 2007 – still in use and fully operational (used for stainless steel sheets, 0.8 – 2 mm thick). Rsdpfx Aisz Iwvgorech

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, positioning speed: 80 m/min, repeat accuracy: 0.03 mm, input frequency: 50 Hz, warranty duration: 24 months, working range: 6,000 mm, Equipment: cooling unit, safety light barrier, G-12A HIGH SPEED PROFESSIONAL TUBE LASER CUTTING MACHINE 1500-3000W The G series is equipped with many high-quality components with extreme performance and powerful cutting functions,suitable for tube cutting of various types and diameters ● The Highest Standards of Chucks in the Industry ● Two Methods for Fewer-tailing Cutting ● Variable Diameter Wheel Supporting ● Automatic Unloading Device ● Super Dust Removal System ● Patented Dust Baffle ● High-strength Cage Structure Welded Machine Bed Technical Parameter: Power: 1500W-3000W Maximum Tube Processing Size: 6000mm*φ120mm Max. Rotating Speed of Chucks: 160r/min X/Y-axis Positioning Accuracy≤0.05mm Rcodpfx Aeuc Sifjiroh X/Y-axis Repositioning Accuracy≤±0.03mm Maximum positioning speed: 80m/min Max. Acceleration: 1.5G Round Tube Processing Dim: Φ10mm-Φ120mm Square Tube Processing Dim: 10mm*120mm Overall Dimensions: 9000mm*2700mm The Highest Standards of Chucks in the Industry The highest standards of chucks in the industry with strong clamping force, high rigidity, high speed, and stable performance Two Methods for Fewer-tailing Cutting Support two fewer-tailing cutting methods , choose one of them on the software interface according to different tube diameters Chuck double jaws: standard double jaws, small tube cutting precision is guaranteed Support: 2 sets of variable diameter wheel support standard (optional to increase to 3 sets)/optional servo support Unloading: [3M/4M] cylinder unloading rack/optional-[3M/4M] servo unloading rack/optional Loading: [Fully automatic loading rack/simple fully automatic loading rack/semi-automatic loading rack]/optional Dust removal: standard rear card hollow dust removal Short tail: chuck fixed, crossbeam fixed, short tail, front card open, rear card Continue to move forward, shorten the tail, ≥80 mm; if the short tail function is not used, the tail is about 200 mm Variable Diameter Wheel Supporting G Series has a wide range of cutting for various types and diameters of tubes, supported by the variable diameter wheel Automatic Unloading Device Efficient automatic unloading, saving time and labor costs, greatly improving production efficiency Super Dust Removal System The super dust removal system with ventilation design inside the chuck and the tube reduces the slag hanging in the tube, which is independently researched and developed by Glorystar Patented Dust Baffle Patented dust baffle protects important components from pollution and ensures stable performance High-strength Cage Structure Welded Machine Bed The industry’s highest-quality high strength cage structure welded machine bed with long life, anti-vibration, anti-torsion and anti-deformation

Condition: new, Year of construction: 2025, RST-LC1500 Advantages of the 2D Ultra-Wide Laser Cleaning Machine: A: 600–800 mm wide cleaning with ultra-wide coverage. B: Equipped with imported high-performance SOC controller. C: Various selectable 2D cleaning patterns; 14 languages available. D: Complies with European safety standards; triple safety mechanisms. E: Equipped with multiple parameter databases tailored to various operating conditions. F: High-protection safety design. G: Easy maintenance and long-term stable operation. Machine Technical Specifications: Power supply 220V 50Hz/60Hz Output power ≤5.5 kW Operating temperature 10–40°C Cleaning area Cleaning width ≤ 800 mm Cooling method Air cooled Focal length 500/800/1000 mm Weight of laser cleaning head 900 g Laser safety class Class 4 Machine dimensions 640 × 330 × 620 mm Machine weight 46 kg Packaging dimensions 850 × 650 × 900 mm Package weight 88 kg Laser Generator Specifications: Parameter name Specification Laser generator model MFSC-1500M Power adjustment range 10%–100% Laser wavelength 1080 nm Modulation frequency 1–5000 Hz Output power instability ±1.5% Optical fiber cable length 10 m Machine Configuration: Component name Brand Description Machine body DPL Professional cleaning cabinet Laser generator MAX MFSC-1500M Laser head Hydraulic / Brand 2D Super Wide Angle Chiller system Bingyue 1500W-S Price: RST-LC 1500W (230V).....€9,500 Warranty: Two-year warranty on the laser source, One-year warranty on other machine components. No warranty on consumable parts. OPTION: Rcodpfx Asw Ix Dpeirjh TERMS AND CONDITIONS Training and Installation: 1 day €600 (incl. arrival and departure) Transport Costs: Air freight: €1,200 / Sea freight: €650 Delivery: 2–3 working weeks after payment receipt for air freight 5–6 weeks by sea freight Payment: 100% due upon order and before shipping (air cargo or by sea)

Condition: used, functionality: fully functional, Year of construction: 2011, power: 18 kW (24.47 HP), input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, compressed air connection: 7 bar, We are offering this used TRUMPF TruMatic 3000 laser cutting machine, manufactured in 2011. Maximum cutting force: 165 kN Laser power: W Machine number: A0111A0021 Year of manufacture: 2011 Mains voltage: 400 V Mains frequency: 50 Hz Connected load: 18 kVA Control voltage: 24 V Redpfx Ae Aaxt Rsirjch Required fuse rating: 3 × 35 A Compressed air connection: 7 ± 1 bar Nitrogen connection (N₂): 30 bar Oxygen connection (O₂): 20 bar If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 296 h, control type: CNC control, The Jinan Bodor P3T series is one of the manufacturer's most sought-after, fully enclosed industrial workhorses equipped with an automatic pallet changer. In addition to sheet metal processing, this machine is also designed for the precision cutting of tubes and profiles (T-version), allowing the entire production range to be covered with a single system.Dual Function: Flatbed sheet metal cutting and automatic tube cutting module in a single system. Maximum Safety: Fully enclosed protective cabin with laser safety glass for the complete protection of operators and the environment.Minimal Downtime: Automatic pallet changer system that enables loading and unloading during the cutting process.Outstanding Dynamics: High positioning speed and acceleration for maximum productivity.Intelligent Control: Bodor PRO. Technical Specifications: - Laser Source Power: 3000 W (3 kW) - Sheet Dimensions (X x Y): 3000 mm x 1500 mm - Tube Length Capacity: 6000 mm (6U execution) - Chuckable Tube Diameter: Ø20 mm – Ø170 mm (and corresponding square and rectangular profiles) - Chuck System: Automatic pneumatic / electric self-centering chucks Redpfsznwu Sox Airech - Control Software: Bodor PROPositioning - Accuracy: ±0.03 mm - Cuttable Materials and Guideline - Maximum Thicknesses (3 kW): Carbon Steel / Mild Steel: max. 20 mm Stainless Steel: max. 10 mm Aluminum: max. 10 mm Brass / Copper: max. 6 mm Accessories and Scope of Delivery: - Factory industrial water chiller unit - Automatic voltage regulator / stabilizer - Extraction and dust filtration system - Automatic nozzle cleaner - Complete documentation and software licenses Condition and Inspection: - The machine has been continuously maintained and has a service history fully supervised by a specialized technician. It is currently in live production and can be inspected and tested under operating conditions by prior appointment. Subject to prior sale. Under power in Hungary.

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 60 W, laser wavelength: 1,070 nm, type of cooling: air, warranty duration: 12 months, shaft length: 1,070 mm, Equipment: cabin, Laser engraving machine with 60-watt laser power (new) Rsdpfx Asfkgq Nsirech - 60-watt MOPA laser (enables color laser engraving on stainless steel) - incl. 4th axis (rotary unit) - incl. Windows 10 Pro 64-bit PC system - incl. 22" monitor - everything fully installed and calibrated - Engraving software in German - very easy to operate - switch on and start - Fiber laser source with 60 watts for high-contrast and fast markings with extremely high resolution (see images) - Deep engraving up to 4mm possible (also in hardened steel) - Wobble function, e.g., for cleaning metal components - for engraving on many metals (stainless steel, brass, aluminum, etc.) and many plastics - heavy-duty industrial quality - Complete system / ready for immediate use - Working area approx. 500 x 600 x 600mm (l x w x h) - Clamping surface with fastening threads in a 50mm grid - LED work area lighting - 50mm pipe connection for fume extraction - Engraving area approx. 180 x 180mm - expandable to approx. 300 x 300mm - incl. foot switch to start the engraving process Please also note our attractive leasing/hire-purchase offers. Sales are exclusively to commercial businesses. Delivery / Consulting / Sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 800mm Height: 1800mm Depth: 1000mm Weight: approx. 150kg

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 265020110084, Technical specifications available upon request. Redpfx Aijzd Hfxerjch

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Operating hours: 28,000 h Redpfx Asy Rnb Djirjch

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, laser source manufacturer: Max Photonics, laser power: 3,000 W, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 2 mm, sheet thickness copper (max.): 2 mm, pipe diameter (max.): 250 mm, pipe length (max.): 6,000 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, ACME Tube & Profile Laser System – NEW 2026 | Ultimate Precision & Efficiency Secure cutting-edge laser technology for your production from the specialist in tube and profile laser systems. Brand-new ACME Tube & Profile Laser System (Year of manufacture 2026) – engineered for maximum productivity, precision, and reliability in industrial applications. Thanks to an innovative design with vertically mounted guides, you benefit from an especially compact footprint combined with high stability and performance. Your advantages at a glance: ✔ Processing of tubes & profiles up to 250 mm Ø / edge length ✔ Optional 45° laser head for complex cuts and maximum flexibility ✔ CE compliant – highest safety standards ✔ Central lubrication – reduced maintenance, extended service life ✔ Semi-automatic loading – efficient material flow ✔ In-house service team + online support – rapid assistance, minimal downtime ✔ 2 chucks This system is the ideal solution for companies seeking to boost productivity while reducing costs. Rcsdpfx Aijy Iwxgorjh Condition: New Year of manufacture: 2026 Availability: Approx. 3 months after order Inspection or demonstration of a system is possible at any of our customers’ sites by appointment.

Condition: good (used), functionality: fully functional, Year of construction: 2011, Trumpf TruLaser 5030 L16 in good condition for sale. Optional available with Liftmaster. The machine is being sold due to a plant upgrade. Working area: 3,000 x 1,500 mm Laser source: CO₂ laser Laser power: 5 kW Year of manufacture: 2011 Control system: Siemens Sinumerik Max. sheet metal size: 3,000 x 1,500 mm Processable materials: Steel Stainless steel Aluminum Immediately available Inspection possible at any time by appointment. Rcodpfx Aiezlttlorsh

Condition: excellent (used), Year of construction: 2010, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS General Information Manufacturer: TRUMPF Model: TruLaser 5030 fiber (L41) Machine Type: Laser cutting machine Year of Manufacture: 2010 Available: End of October 2026 Weight: 12,000 kg Working Area Working area X/Y/Z: 3,000 × 1,500 × 115 mm Speed: max. 300 m/min Accuracy: 0.05 mm Laser Laser: TruDisk 3001 solid-state laser Laser power: 3 kW Laser operating time: approx. 35,000 h Cutting Capacities Sheet thickness steel: max. 20 mm Sheet thickness stainless steel: max. 15 mm Sheet thickness aluminum: max. 15 mm Control and Operation Control system: Siemens SINUMERIK 840D SL Touch color screen: 17 inches Machine Dimensions Length: 9,950 mm Width: 4,600 mm Height: 2,400 mm Costs IT costs: 3,000 EUR EQUIPMENT Enclosed machine frame with integrated laser unit Motion unit for highly precise machining Torque drive in combination with linear direct drives Enclosed, fiber-guided beam entry Machine cooling unit, water-air Integrated control cabinets with internal lighting Common main switch for machine and laser Automatic pallet changer in the longitudinal direction Longitudinal conveyor belt Power supply for the TruDisk via the machine Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Rsdpfxez S Egis Airjch Automatic nozzle cleaning Laser cooling unit, water-air Excitation via pump diodes with long service life Laser power control Laser logbook function Universal cutting unit with fully adaptive lens system Single-cut head strategy Protective glass against lens contamination ControlLine height control and sheet outer edge detection Workshop programming Fast reproduction Integrated technology data Automatic shutdown Programmable cutting gas and pressure selection FastLine FlyLine Remote service via the internet Diagnostic functions Integrated e-shop USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Integrated compact dust extraction system Machine cladding with certified viewing window Door on the right Electric roll-up roof

Condition: used, functionality: fully functional, Year of construction: 2014, machine/vehicle number: 125, control type: CNC control, laser type: CO₂ laser, laser source manufacturer: FANUC, laser source model: AF4000i-C, laser power: 4,000 W, overall weight: 9,500 kg, AMADA FO MII 3015 NT CO2 laser cutting machine, manufactured 03/2014, with 4 kW FANUC AF4000i-C laser source. The machine is operational and has been used for cutting by the seller. Operating and cutting hours are being checked and will be added. IMPORTANT: The tower storage / automatic material handling system was dismantled in summer 2026. The machine has no pallet changer. To move the cutting table outside the machine manually, suitable rails would need to be designed and built. This rail system is not currently installed. A computer with installed AMADA Dr.ABE nesting/programming software, version 2.15.04, and its software licence is included. Machine nameplate: serial number 125; weight 9,500 kg. The dismantled tower is stored outdoors. Any sale of the tower and its condition/completeness must be agreed separately. It is not part of the advertised machine configuration. Redpfsz Tdc Sex Airoch Asking price: EUR 20,000 net, plus applicable VAT. Further information on hours, maintenance history, accessories included, inspection and collection arrangements will be added.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 10 h, laser power: 3,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 5 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, We offer a high-precision laser cutting machine with 3000 watts of laser power. Type: LG-1313/3kW HaiCut Premium Line - Maximum configuration - Innovative 3-gas switching system (Pressure and gas type controlled via software) Cutting with N2, O2, mixed gas (compressed air) - Automatic front door - Machine bed lined with fireclay - Machine bed and axes measured and adjusted with Renishaw interferometer Our goal is to offer the best, most reliable, and most affordable laser machines currently available on the market. Our machines are ideal for workshops and repair shops. A perfectly designed cutting parameter library is included in the scope of delivery, as well as first-class on-site service. Please also note our favorable leasing/hire-purchase offers. New machine. We would be happy to demonstrate the machine in our facility. Travel range: approx. 1300 x 1300 mm Table area: approx. 2500 x 1300 mm (i.e., there is space in the machine for a medium-sized sheet) Rcsdpfx Aji Igauoireh Extendable cutting table For high-precision cutting of metal Fully installed and adjusted Cutting software in German Incl. module box Very easy to operate Switch on and start Laser source from Max Photonics (G5/CE version) with 3000 watts of power Extensive electronic and mechanical collision protection measures for the cutting head Large laser protection window on the front door Automatic front door Safety light curtain for maximum operator protection Cutting of stainless steel up to 12 mm Cutting of steel up to 22 mm Cutting of aluminum up to 12 mm Cutting of brass up to 5 mm Heavy-duty industrial quality Complete system / ready for immediate use LED work area lighting 200 mm pipe connection for fume extraction Incl. extraction fan The following options are also available: - Automatic nozzle changer (optional) - Automatic nozzle centering (optional) - Raw material detection and part nesting via camera system CypVision (optional) - Import of 3D files (.stp) and unfolding (optional) - Direct import of SolidWork, SolidEdge, Inventor, etc. (optional) - Nesting, calculation, scrap management, etc. (optional) - ERP system that can be combined with all your other sheet metal processing machines (optional) Leasing or hire purchase is possible via our financing partner. Do you need a different power output or table size? - No problem, we have several machines in stock or available in a short time. Sales are exclusively to commercial businesses. Delivery / consultation / sales only in Germany / Austria / Switzerland Machine dimensions approx.: Width: 3.5 m, Height: 2.1 m, Depth: 3.5 m Total weight: approx. 3.5 tons

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, pipe diameter (max.): 9,000 mm, input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, model: GS-HG Maximum length of pipe: Rsdpfx Aewwqvweirjch

Condition: good (used), functionality: fully functional, Year of construction: 1999, laser power: 2,400 W, sheet thickness (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,740 mm, overall weight: 23,000 kg, total length: 9,100 mm, total width: 7,900 mm, total height: 2,400 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, The machine is in good condition. Rsdpfxsymrn Ej Airech

Condition: excellent (used), functionality: fully functional, laser type: fiber laser, laser source manufacturer: Bistronic, laser power: 500 W, laser wavelength: 1,070 nm, table length: 1,20,01,200 mm, input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, overall weight: 3,080 kg, total length: 2,050 mm, total width: 2,500 mm, total height: 2,000 mm, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, the machine is running well, the only reason that we sale out the machine is that the x and Y stroke are to short. machine is under power. Redpo Afzlaofx Airoch

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: L49/A0221E0510, TRUMPF TruLaser 3030 fiber + TruLaser 5030 – with 2 PalletMaster systems and a STOPA sheet metal storage system (49 slots) Complete, automated laser cutting system – preferably sold as a complete package. For sale is a comprehensive TRUMPF laser cutting system consisting of two laser cutting machines, each with a PalletMaster and connection to an automated STOPA sheet metal storage system. The system is particularly suitable for automated sheet metal processing and efficient material flow. 1) TRUMPF TruLaser 3030 fiber (L49) – 4 kW – Year of manufacture 2016 For sale is a TRUMPF TruLaser 3030 fiber (L49) with 4 kW laser power and extensive special equipment. The machine is in good condition. Technical data: Manufacturer: TRUMPF Model: TruLaser 3030 fiber (L49) Year of manufacture: 2016 Condition: Good Laser power: 4,000 watts (4 kW) Laser source: TRUMPF TruDisk 4001 Cutting area: 3,000 × 1,500 mm Control system: Siemens SINUMERIK 840D SL Drive system: Linear and torque direct drives Operation: 17-inch touch color display Equipment: BrightLine fiber Automatic pallet changer Automatic nozzle changer PierceLine FocusLine NitroLine PlasmaLine FlyLine FastLine ContourLine AdjustLine ControlLine (automatic height control) Automatic nozzle cleaning Integrated camera Drop&Cut Electric roll-up roof Conveyor system Extraction and filter system Cooling system Automation and Software Automation interface for external loading and unloading systems TruTops Fab Integration TRUMPF TruTops Laser Network connection and USB interface 2) TRUMPF TruLaser 5030 (L52) – 6 kW CO₂ laser cutting system Technical data: Manufacturer: TRUMPF Model: TruLaser 5030 (L52) Year of manufacture: 2015 Laser: TruFlow 6000 CO₂ laser Laser power: 6,000 watts (6 kW) Working area: 3,000 × 1,500 mm Drive: Linear direct drives (gantry) Cutting head: Universal cutting head with 250 mm lens Control system: 17-inch touch color screen Automatic pallet changer Equipment and functions: BrightLine Rcodpfxs Afpyfs Airoh CoolLine PierceLine / FocusLine / NitroLine PlasmaLine / LensLine / ControlLine Smart Nozzle Automation (automatic nozzle changer) Smart Collision Prevention Automatic height control Cutting head lens with RFID chip Integrated cooling unit Longitudinal conveyor TruTops Laser software Other options available: Integrated camera systems Drop&Cut scrap material processing Automation interface PalletMaster connection TruTops Fab Integration 3. Automation – 2 × TRUMPF PalletMaster One PalletMaster per laser cutting machine 20 storage spaces each Modernization of PalletMaster and TKL by +profilsystems Connection to the STOPA storage system 4. STOPA sheet metal storage system Automated sheet metal storage system 49 storage spaces Connection to the laser cutting systems via the existing automation. Sale and Inspection The complete system, consisting of both TRUMPF laser cutting machines, the two PalletMaster systems and the STOPA storage system, is preferably sold as a whole. Individual sale is possible by agreement. Inspection by appointment. Price on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Rjdpsyyygksfx Airsch Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Power: 3,200 W

Condition: new, functionality: fully functional, Year of construction: 2026, warranty duration: 24 months, Equipment: CE marking, cooling unit, documentation/manual, fume extraction, Diamond Core – Fiber laser for precise and efficient laser cutting The Eckert Diamond Core is a modern fiber laser cutting system designed for the highest demands in industrial sheet metal processing. With its powerful CNC control and an intelligent extraction system, it enables precise cuts, short cycle times, and a clean working environment – ideal for mechanical engineering, steel processing, and contract manufacturing. Highlights of the laser cutting system: ✔ Precise laser cutting – even for copper and stainless steel ✔ Energy-efficient fiber laser for economical operation ✔ Intuitive touchscreen control ✔ Robust design and low maintenance ✔ Service and technical support directly in Germany Rcedpswqdbaefx Airoh ➡ Request a quote on Maschinensucher now and take your production to the next level with the Diamond Vector fiber laser!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser hours: 10 h, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Section Steel Laser Cutting Machine Bevel cutting highly enhances competitiveness Smart cutting head equipped with professional Acu3D rotary axis Achieves multi-directional, multi-angle 3D cutting (Web beveling, R-corner cutting, V bevel, Y bevel) Versatile cutting Sheet, tube, and section steel cutting in one One-stop processing workflow, seamlessly integrated with TEKLA Easily complete drawing import - nesting & programming - process setup - material alignment - cutting Rjdpfx Asw I Ilioirjch

Condition: ready for operation (used), Year of construction: 2013, sheet thickness steel (max.): 25 mm, power: 6 kW (8.16 HP), Working area 3000x1500. Loadmaster system included.Due to not using machine for longer time,the service is required. Rjdewh R R Nspfx Airsch

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 15,000 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, laser type: CO₂ laser, laser source manufacturer: Trumpf, laser hours: 15,342 h, laser power: 5,000 W, sheet thickness (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 200 m/min, workpiece weight (max.): 1,000 kg, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, For sale here is a Trumpf Laser 3030 L20 CO2 laser cutting machine. The machine is fully functional and equipped with 2 cutting heads: Standard + Cool Line. The Lantek Expert Cut cutting software is included. Delivery/transport and dismantling are the responsibility and at the expense of the buyer. A cross conveyor and exchange table are included. Rcsdpfs Aggb Rox Aireh

Condition: ready for operation (used), Year of construction: 1999, We are offering this used Amada LASMAC LC-1212 A3 laser cutting machine, manufactured in 1999. Rcedpfx Aez Rvg Djireh Manufacturer: Amada Model: LASMAC LC-1212 A3 Year of manufacture: 1999 Condition: ready for use If you have any questions or require further information, please do not hesitate to contact us.