Used Cnc plasma cutting machine for sale (85,226)

Messer Cutting Systems Metalmaster 4020

€15,000

Call

Condition: excellent (used), Year of construction: 2002, Knife Metalmaster 4020 Working area: 2000mm x 4000mm B39uzm0riz 1 x Plasma Kjellberg Hifocus 100 I . Including Tehno filter system BFK 40 , year of manufacture 2019 immediately available

more

Listing

Deutschland

6,760 km

Cnc Plasma Cutting Machine Pierce

Lind Cutting King P4000

Call

Condition: good (used), Year of construction: 2017, CNC Portal Plasma Cutting Machine Manufacturer: Lind Cutting Type: King P4000 Year of manufacture: 2017 CNC control track width: 4.000 mm track length: approx. 15 m working area: 2800 x 12000 mm without suction table 1 x plasma chamfering unit Pro Cut 2D-N power source Kjellberg HiFocus 440i Ckpwbhnsk Filter system Kompac Air 325 660 4x4/o 18.50 KW

more

Listing

Latvia

5,973 km

Plasma Cutting Machine

ALFATEC CNC 1,5x3M PROFI

Call

Condition: ready for operation (used), Year of construction: 2018, Movement X-Axis Movement 1500 mm Y-Axis Movement 3000 mm Max Material Thickness Steel 25 mm Media Dlaanx Pump drive power 5,5 bar Movement X-Axis Movement 1500 mm Y-Axis Movement 3000 mm Max Material Thickness Steel 25 mm Media Pump drive power 5,5 bar This ALFATEC CNC 1,5x3M PROFI Plasma Cutting Machine was manufactured in the year 2018. The machine has a Max. cutting speed of 20000mm/min. Application Types Plasma Cutting

more

Listing

Vilnius

5,854 km

Pierce RUR 3000 GP

€9,000

CNC Plasma Cutting Machine/ Gas Burning Machine

Call

Condition: used, Year of construction: 2005, Cnc plasma cutting machine “Pierce RUR 3000 GP” is in good used condition. The machine has been fully serviced. Replaced new engines, heads, nozzles. Currently connected to a 6 meter table. It is possible to adjust the working table length of 12 meters. The machine is in good working order, the machine can be tested in Vilnius, Lithuania. Specification: Manufacturer: Pierce Control Automation spol. s.r.o. Year of manufacture: 2005 Made in: Czech Republic Key features and configurations: Cutting width: 2,600 mm. Total length of rails: 7,700 mm. Cutting length: 6,100 mm. Cutting speed range: minimum 0 maximum 12,000 mm/min. Motor system: X – Y axis. Geared AC motors. Burners: gas station with LPG burner and one plasma station with burner. CNC controller: BARNY 10. E2joxmu Control panel: on a left side. Plasma source: Jackle 160A (quality cut up to 25 mm). Modification of tables: suction tables with air extraction system. Burner height control: PIERCE. Working conditions: Standard working temperature range 0-50. 95% humidity without condensation. The extraction system is included. A closet with all the balloons – there is. There is no compressor. If you have more questions, we will be happy to answer them.

more

Listing

W+W Plasmacut GmbH PlasmaCut CNC 3015 inkl. Absaugung

Barbing

6,619 km

Plasma cutting machine

W+W Plasmacut GmbH PlasmaCut CNC 3015 inkl. Absaugung

Call

Condition: good (used), Year of construction: 2014, Functionality: fully functional, Plasma cutting machine Plasmacut CNC 3015 Hypertherm 105 Aggregate Construction Year 2014 Istkutm Cutting Area: 3000 x 1500 mm Incl. TEKA Suction System

more

Listing

Bad Laasphe

6,910 km

Sato Satronik CNC 801

Call

Condition: excellent (used), Year of construction: 1998, Plasma cutting system Manufacturer: Sato Elektronik Type: Satronik CNC 801 Cajzckdi Year of manufacture: 1998 Technical data: Gas torch and plasma torch Incl. exhaust system Sheet size 3000x1500 mm More details see photos!

more

Listing

Bydgoszcz

6,269 km

Otinus PCO-2512-A

€16,166

Call

Condition: new, Year of construction: 2023, CNC plasma cutting machine PCO-2512-A The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1270 x 2600mm - Clearance between table and gantry: 140 mm - Maximum cutting tube height: 100 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3150 mm - Width: 2030 mm - Height: 1500 mm - Total mass: 950.0 kg - Maximum load: 1250.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! 8trdizuy Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

more

Listing

Bochum

6,980 km

ESAB SGX 2000

€42,500

Call

Condition: excellent (used), Year of construction: 2015, Esab SGX 2000 CNC plasma cutting machine Control : Vision T5 Working area : 1500mm x 3000mm 1 x Plasma EPP 202 (200 Ampere) Automatic gas console Bhyrw93bh8 Including filter system immediately available

more

Listing

Berlin

6,562 km

Swift-cut Swifty 1250

€8,000

Call

working range: 1,250 mm, overall weight: 350 kg, input voltage: 400 V, sheet thickness steel (max.): 12 mm, Condition: excellent (used), Year of construction: 2021, Operating hours: 50 h, CNC plasma cutter with 1250mm cutting area. Includes Power Hypertherm 45XP power supply and large 200l, low noise air compressor. 8jew2lrg Capable of cutting up to 12mm steel with great cutting quality. Includes laptop and software for control. Also all manuals and documentation. Requires 3 16amps phase power. Swift-Cut is made in the United Kingdom and offers very comprehensive support. They can even help by controlling the laptop if requested. Very good condition. Only owned by me for 2 years and used for less than 50 hours of run time. I have copies of all original purchase receipts. Avalible for pickup in Berlin December 1

more

Listing

Deutschland

6,760 km

CNC plasma metal cutting machine

Messer Metalmaster 3015

Call

Condition: good (used), Year of construction: 2014, CNC Plasma Cutting Machine Manufacturer: Messer Type: Metalmaster 3015 CNC control: Global Control S Year of manufacture: 2014 Cd9tzzk0zj Retrofit 2019 working area: 1.500 x 3.000 mm 1 plasma torch with power source Kjellberg HiFocus 280i MÄ070923

more

Listing

Techno Park Servis s.r.o Marlin - Tornado 1225

Jeneč

6,486 km

Techno Park Servis s.r.o Marlin - Tornado 1225

€6,800

Call

Condition: new, Year of construction: 2021, There is only for air plasma cutting method. It is light, easy assembling profile cutting machines. Integrated cutting table is included on the cost of machine. An effective exhaust of the combustion products protects health of cutting machine operators. Main features: 1) Position accuracy-up to +0,15mm 2) ARC Voltage torch height control with ohmic contact 3) Cutting widths from 1000mm up to 1500mm 4) Cutting length from 2000mm up 3000mm 5) Cruising speeds of up to 12m/min(480ipm.) 6) Material thikcness capacity: plasma up to 30mm 7) Servo motors 8) The weight of machine without plasma source "Standard" 300kg (1500x3000mm) 9) The weight of machine without plasma source with cutting table 1300kg (1500x3000) 10) Load ability "Standard" 1200kg 11) Number of tools supports-1 12) Screen interface7" (10"option) 13) Bilateral longitudinal drives 14) Integrated cutting table as optional 15) Magnet anti-collision system. Max thickness of material for cutting by plasma 35. Max cutting current of plasma (A)-125. Type of C N C -MARLIN-10". Motors: step/easyservo/servo 1-main aplication- opt./opt./1. Velocity of gantry moving (m/min) -10.0 . THC plasma/oxy- include/none. Accurassy position/to repeat counter- 0,1 / 0,3-0,4 Aplication of table- independed Dual longitude drive 1-main aplication- 1/option Power input kWt-2.5 Quantity of tools (supports for torches)-1 C39sue8a

more

Listing

Rzeszów

5,934 km

STIGAL DYNAMIC 3000

€15,000

IN STOCK CNC Plasma&Gas Cutting Machine

Call

Condition: excellent (used), Year of construction: 2012, NEW REDUCED PRICE! Selling machine: STIGAL DYNAMIC plasma cutting machine Year prod. 2012 Machine in a set with accessories: - CNC control panel Chmmz8gabt - Cutmaster A60 80A plasma generator - high efficiency exhaust extraction system with filters Working area: 3000 x 1500 mm Max cutting thickness: 20 mm One of the fastest machines available. Selling directly from the factory. There is a possibility to start up and check. Xjgtxrqp Net price. Does not include transportation. Feel free to contact me!

more

Listing

Bydgoszcz

6,269 km

Otinus PCO-3020-AG

€20,452

Call

Condition: new, Year of construction: 2023, CNC plasma/gas cutting machine PCO-3020-AG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 3100mm - Clearance between table and gantry: 140 mm - Maximum cutting tube height: 100 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1550.0 kg - Maximum load: 2800.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy Bqjozijb This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

more

Listing

Bochum

6,980 km

CNC plasma cutting machine Linc-Cut S 15

MicroStep Mastercut Eco Plus

Call

Condition: excellent (used), Year of construction: 2013, CNC plasma cutting machine Microstep Mastercut Bbt0j0vuezv working area : 1500mm x 3000mm 1 x Plasma Kjellberg 161i , with automatic gas console Cutting data see PDF Without suction Immediately available

more

Listing

München

6,662 km

Lincoln Linc-Cut S 1530w

Call

Condition: new, Year of construction: 2023, Plug & Play system for plasma cutting: Ckhce0ro33 • Hole piercing up to 25 mm • Air plasma cutting • For mild steel and stainless steel • Sheets up to 3000 x 1500 mm *at 25 mm thickness max. panel size 1500 x 1500 mm • Water table intercepts resulting dusts • Compact machine with small footprint • Including power source • Includes software package for drawing and nesting • Quick installation and easy operation • Ready for operation within a very short time

more

Listing

Deutschland

6,760 km

CNC Portal Plasma Cutting Machine

Messer Multitherm 4000

Call

Condition: good (used), Year of construction: 2009, CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2009 Control: Global Control Bxhvnber Table: 2x6 m 1 x Plasma Hypertherm HPR260XD 1 x oxyfuel ALFA Gasart Ace No filter

more

Listing

Narva

5,880 km

Messer Metalmaster 6020

Call

Condition: good (used), Year of construction: 2005, machine/vehicle number: 284.123.05, Thanks to the space saving, compact construction the machine can be installed quickly ready for use. High position speeds and a fast, intelligent torch lifter reduces non-productive times. Buy80tavx Hypertherm HPR130

more

Listing

Rzeszów

5,934 km

TORMEC AG Switzerland TORMEC PLASMA

€4,900

Call

Condition: good (used), Year of construction: 1999, NEW REDUCED PRICE: Selling machine: TORMEC PLASMA plasma cutting machine Year prod. 1999 Manufacturer: TORMEC AG Switzerland Machine complete with accessories: - Thermal Dynamics Cutmaster A40CE plasma generator - extractor - possibility to add a computer with software Working area: 3000 x 1500 mm C773s2fkpr Selling directly from the plant. There is a possibility to start up and check. We own other machines. Feel free to contact us!

more

Listing

Bydgoszcz

6,269 km

Otinus PCO-4020-C

€20,881

Call

Condition: new, Year of construction: 2023, The price is for a made-to-order machine. This model is also available in our warehouse at a different price. CNC plasma cutting machine PCO-4020-C The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 4100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 4650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1850.0 kg - Maximum load: 2500.0 kg - Adjustable support legs: 8 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Bqdgqsem Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

more

Listing

Bochum

6,980 km

Plasma cutting ploter machine cnc 65a

Bach Multicut 2500

Call

Condition: good (used), Year of construction: 2008, - Working range / cutting width approx. 2500 mm - Working range / cutting length with approx. 14.5 m raceway approx. 12000 mm - Control BACH type MyBach - track width approx. 2850 mm - Plasma - torch with height adjustment - Plasma source KJELLBERG Hi FOCUS 280 i Plus - Cutting current at 100% ED 10 - 280 A Bewhz00prtf - cutting range steel approx. 5 - 60 mm - cutting range aluminum approx. 5 - 30 mm - Cutting range stainless steel approx. 5 - 30 mm - Autom. gas console - Cooling unit KJELLBERG KWE 360 - Connection 400 V - Extraction table with extraction system make TEKA 12 x 2 m - Extraction system TEKA FC 4 H with spark separator - Weight approx. 15 T - Space requirement plant approx. L 15 x H 2,5 x D 5,0 m

more

Listing

Józefin

6,034 km

ANFAN ANF-65A

€10,000

EXW Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2018, PLA-65A PLASMA CUTTER The machine, which is able to make fast, precise and high-quality cuts up to 25 mm, was specially developed for manufacturers of ventilation ducts, advertisers and customers using thin sheets. Together with the economic price, this machine CNC plasma cutting machines equipped with ergonomic functions have become an indispensable helper for customers in this matter industry. Technical data: Hypertherm Powermax plasma source Sw738k Power: 65A Max power consumption 11 kw Speed m / min 20 X / Y / Z 1500 3000 150 working area Weight: 1000 kg Loudness: 69 dB (A) Dimensions: Length: 3700 mm Width: 2200 mm Height: 1300 mm Equipment: Source - power hypertherm max 65A Controler CNC +THC PC computer

more

Listing

Deutschland

6,760 km

Plasma Cutting Machine Robot CNC Plasma

Lincoln PythonX Structural

Call

Condition: excellent (used), Year of construction: 2021, Plasma Cutting Machine Robot CNC Plasma Cutting System Manufacturer: Lincoln Type: PythonX Structural Year of construction: 2021 Commissioning: 2022 CNC control System consisting of: 1 x PythonX system for mild steel production. 6 x inlet conveyor extensions (1.2 m SECTION) 6 x Outfeed conveyor extensions (1.2 m SECTION) 1 x dust extraction system 1 x input drag cross conveyor (4 Pcs.) 1 x input drag cross conveyor # EXTENSIONS (1 PIECE) 1 x output drag cross conveyor # (4 pcs.) 1 x output drag cross conveyor # extensions (1 Piece) 1 x Extension to 1,219 mm working width 1 x Auto calibration device 1 x Safety fence and light barrier The PythonX is capable of processing the following materials: Beams Square and rectangular tubes U-iron L-profile Flat steel Bead flat steel High-Definition Torch Plasma Technology Fully automatic gas and kerf control Patented opening angle compensation and advanced bevel adjustment ABB Robot Reversed multi-axis robotic motion cutting system. The multiple axes provide the freedom and versatility to cutting intricate shapes in mild steel sections with high-quality workmanship. High speed measuring roller mechanism above the infeed conveyor. For accurate positioning of the workpiece. Infeed and outfeed conveyors. Standard rollers can accommodate 914 mm wide material. The roller spacing is 1219 mm, within a range of 2438 mm to the left and right of the plasma cutting robot the roller spacing is 406 mm. Robot structure dimensions Length approx.: 2.5 m width approx.: 2,3 m Height approx.: 3.0 m passage height: 0,889 m Weight approx.: 4.6 kg Infeed and outfeed roller conveyor Infeed conveyor length: Standard approx.: 14.63m H9uncz8kip Outfeed conveyor length Standard approx.: 12.2 m roller distance Ø: 101 mm seamless hose Workpiece length The standard system holds beams of 12 m length. Extension up to 24m in steps of 1.2m. Material thickness Punching limit solid sheet approx.: 38 mm Thickness edge start max.: 51 mm Extension possible: 50 mm piercing limit, 75 mm edge start Other materials bead flat steel, flat steel, strip steel, aluminum, stainless steel Minimum capacity Maximum capacity Width Height Width Height mm mm mm Beam 100 100 1219 457 U-profile 76 25 914 100 Hollow profile 51 25 308 457 Angle 51 51 254 254 *914mm is standard and the most sold size. Extension required for 1219mm. Venting and dust extraction system Number of filters: 6 Application: for plasma cutting

more

Listing

Techno Park Servis s.r.o. Marlin - Typhoon

Jeneč

6,486 km

CNC Plasma cutting machine

Techno Park Servis s.r.o. Marlin - Typhoon

Call

Condition: new, Year of construction: 2023, This budget cutting machine is created for both method of cutting as a plasma so as a oxy cutting up to 150 mm thickness of material. The high level of reliability with low cost make this machine absolutely competitive in ratio price-quality. Width of cutting-1.5-2.0 . Length of cutting 30-12m. Quantity of tools (supports for torches)-1(oxy+plasma). Max thickness of material for cutting by plasma-50. Max thickness material of cutting by Oxy- 120. Max cutting current of plasma (A)- 200. Type of C N C (option)-MARLIN-10"(15") . Motors: step/easyservo/servo 1-main aplication- opt./opt./1. Velocity of gantry moving (m/min) - 12.0. THC plasma/oxy - include/none. Laser pointer- Option. Quantity of piercing steps Oxy gas concole- 1.-2. Accurassy position/to repeat counter- 0,1 / 0,25-0,35. Aplication of table-independent. Dual longitude drive 1-main aplication- 1. Power input kWt-2.5 I9cceizfk

more

Listing

Memmingen

6,767 km

CNC Tube Cutting Plasma Machine

KAI-TEC PIPE-III

Call

Condition: new, A professional and economical CNC tube cutting machine Tube diameter: 60 - 500 mm Tube length: 6,000 mm Easy installation: Robust steel construction User friendly interface, simple operation Simple and economical software Oxy-fuel and plasma cutting processes FreePIPE features Enter and change existing drawings via parameters Stable construction: The tool portal forms a constructive unit with the tubular bogie. Reliable drive system Panasonic drives with SEW gear units X-Axis: Torch moves along the centerline Y axis: pipe rotation Z-axis: raises and lowers the torch head Touchscreen control: The touchscreen CNC controls the entire cutting process, such as stop, Continue, torch up/down, left/right movement, emergency stop, etc. easy operation Curvelib software is installed on the CNC and has a large number of macro programs. The operator only has to enter the pipe diameter and angle and the cut can take place. Reliable turntable: Stable 3-jaw chuck High torque 3 stable, height-adjustable roller blocks Technical specifications: Cutting process: plasma / oxyfuel Input Voltage: 400V/50Hz Pipe diameter: 60 - 1,500 mm Tube length: 3,000 / 6,000 / 12,000 CNC controller: HG823 Axes: X, Y, Z Motors: Panasonic C0meeqsyma Positioning accuracy: +/- 0.5/1,000 mm Repeatability: +/- 0.2/1000 mm Positioning speed: 6,000 mm/min

more

Listing

Bydgoszcz

6,270 km

IN STOCK CNC plasma cutting machine

Otinus PCO-4020-CG

€21,524

CNC Plasma/Waterjet Cutting Machine

Call

Condition: new, Year of construction: 2023, CNC plasma/gas cutting machine PCO-4020-CG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 4100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 4650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1950.0 kg - Maximum load: 4000.0 kg - Adjustable support legs: 8 pcs Bstwfrdk Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

more

Listing

Bochum

6,980 km

Stako Trium WPC

Call

Condition: excellent (used), Year of construction: 2019, STAKO Trium Waterjet - Plasma cutting machine Working area: 2000 x 3000 mm Burny CNC Year of manufacture: 2019 incl. Hypertherm HD pump HyPrecision 50S with all related components incl. Hydrofor for HP pump incl. Hypertherm plasma HPR 130 incl. Hypertherm Upgrade Kit XD technology, autogas console incl. Software Stakonest Plasma software is equipped for marking with argon. E3pnqf7ecz Plasma can cut steel up to a thickness of 25 mm, oxygen + air from the compressor. Cutting stainless steel with gas F5 for thin sheets and H35 for thicker sheets. Included: Consumable parts for plasma Abrasive accessories for waterjet Spare parts and consumables are available for one-time waterjet maintenance.

more

Listing

Neckarsulm

6,834 km

Swift-Cut Pro1250 WT

€24,000

Call

Condition: as good as new (ex-display), Year of construction: 2021, Demonstration line Swift-Cut CNC plasma cutting machine Pro 1250 - water table cutting area 1250 x 1250 mm incl: 93ftwmjxbu - Machine torch Hypertherm SYNC - Marking system - water/oil separator - Swift-Cam Advance nesting software - LAN connection The Hypertherm power source can be added between PMX 65 - 105. In addition, the commissioning and training with 1,400€ as well as the transport is added. The plant can be visited and tested with pleasure.

more

Listing

Deutschland

6,760 km

CNC Plasma&Gas Cutting Machine

Microstep SPL-PA 4501.15+S500

Call

Condition: good (used), Year of construction: 2010, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: SPL-PA 4501.15+S500 Year of manufacture: 2010 2vform CNC control working area: 4.500 x 2.000 mm including 500 mm shaft 1 x plasma source Hypertherm HPR260 with autom. gas console 1 x oxyfuel torch, travelling acetylene 1 x Donaldson DFPRO 6 for outdoor installation MÄ070923

more

Listing

Bydgoszcz

6,269 km

Otinus PCO-6020-CG

€30,881

CNC oxyfuel / plasma cutting machine

Call

Condition: new, Year of construction: 2023, CNC plasma/gas cutting machine PCO-6020-CG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2700.0 kg - Maximum load: 7000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy Cc7jss78ai This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

more

Listing

Pierce Control Automation RUR 2500GP HiFocus 280i

Bochum

(dealership location)

6,980 km

Pierce Control Automation RUR 2500GP HiFocus 280i

€1,03,000

CNC plasma cutting machine SWIFT-Cut Pro

Call

Condition: new, Year of construction: 2017, The CNC-controlled oxyfuel/plasma cutting machine RUR 2500GP is a completely welded gantry construction without bolted joints with linear guides in the transverse axis and digital synchronization in the longitudinal axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft-switch inverter HiFocus 280i offers a fully electronic current source for the power range up to 280 A. The system delivers best cutting results in the range of laser-like cuts and offers an increased lifetime of wear parts. Equipment: Pierce-19" touch screen CNC control system. Energy chains with cables and hoses One motorized plasma torch with automatic initial setting and torch height control Pneumatic anti-collision system HiFocus 280i plasma cutting unit for cutting mild steel with recommended material thickness from 0.5 - 50 mm, piercing up to 40 mm, gases: Air, oxygen, automatic gas console, 15m hose package. One oxyacetylene torch with electric ignition and torch height control. Automatic four step piercing with high preheating One set of wear parts Cutting table with sectional exhaust Kpxtb Technical data: max. cutting thickness 200 mm cutting width 2100 mm cutting length 6000 mm cutting speed 0 - 12.000 mm/min. cutting range 0,5 - 70 mm machine dimensions (L x W x H) 1020 x 2840 x 1700 mm track length 7600 mm Cutting table dimensions (L

more

Listing

Neckarsulm

6,834 km

Swift-Cut Pro MK5

Call

Condition: new, A collection of three of the most advanced CNC plasma cutting machines. Thanks to the user-friendly software, the Swift-Cut-Pro range promises precise cutting at the highest speed with a low investment. The Swift-Cut-Pro range is easy to use, quick to learn and superbly supported by exceptional after-sales service. The Swift Cut Pro range is the solution for affordable in-house metal cutting. Please feel free to schedule a demonstration appointment with us. Ozlef

more

Listing

Deutschland

6,760 km

Microstep HS 4001.25 P

Call

Condition: good (used), Year of construction: 2003, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: HS 4001.25 P Year of manufacture: 2003 B78q787lao CNC control: MSNC500P working area: 2500 x 4000 mm 1 plasma torch with power source Kjellberg HiFocus 100 filter system Kemper 8000 MÄ070923

more

Listing

Bydgoszcz

6,269 km

Otinus PCO-6020-C

€28,810

Call

Condition: new, Year of construction: 2023, CNC plasma cutting machine PCO-6020-C The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 6100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2600.0 kg - Maximum load: 5000.0 kg - Adjustable support legs: 10 pcs Systems THC – Torch Height Controller – The integrated cutting height control system automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the programme information about the angle of the material in relation to the table. Assistance by a specialist We are committed to staying in continuous contact with our Customers; therefore, we meet this challenge by offering a package of hours to be used for the Otinus Professional Assistance within every machine purchased. Otinus Academy This is a constantly growing e-learning platform created for Otinus brand Clients. By purchasing this machine you will gain a year access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Btyuhyv Supplied with machine Installation of the machine and training in the use of the machine at our Clients' sites. - 1 day, up to 8 hours - installation of the machine and learning to use the controller. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

more

Listing

Bochum

(dealership location)

6,980 km

Sato HD 4000

Call

Condition: used, Year of construction: 2007, Portal bridge SATRONIK HD 4000 - CNC path control CNC 3000M - travelling M3up9t - reference limit switch in X- and Y-direction - double sided racks for existing rails for cutting length of 13m (16 m racks) - Plasma interlock circuit for one plasma current source - Plasma system Kjellberg Fine Focus 800 , cutting up to 80mm (cutting data see PDF) - suction cutting table 3200 x 13200 mm - 2 tables a 1600 mm side by side - Filter unit type DOWNFLO DFPRO 12- ZU 562 (outdoor installation) The plant is under power . Disassembly and commissioning on request

more

Listing

Deutschland

6,760 km

Messer Multitherm 4000

Call

Condition: good (used), Year of construction: 2008, CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of manufacture: 2008 Retrofit: 2019 Extraction table: 2.000 x 3.000 mm 1 oxyfuel torch ALFA 1 plasma torch Ekqqgqyxa power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC Own technicians for installation, commissioning and training available! All spare parts in stock. MÄ070923

more

Listing

Bydgoszcz

6,269 km

Otinus PCO-2010-A

€14,500

Call

Condition: new, Year of construction: 2023, CNC plasma cutting machine PCO-2010-A The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100mm - Clearance between table and gantry: 140 mm - Maximum cutting tube height: 100 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 800.0 kg - Maximum load: 800.0 kg - Adjustable support legs: 4 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. Cat3a9s9ap View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

more

Listing

Bochum

(dealership location)

6,980 km

ESAB Retrofit 2009 SXE-P-5000

Call

Condition: used, Year of construction: 1995, Machine type: ESAB SXE-P-5000 NC/ CNC type: CNC version 52 Year of manufacture: 1995/upgrade and conversion 2009 Track width: 5.000 mm Xf7xf2zqa track length: 34.000 mm Cutting range: width 4.000 mm Length 18.000 mm Raceway height 700 mm Table height 700 mm Number of heads: 2 head 1: cutting head Head 2: Marking unit Water basin: 3 basins can be lowered to cut underwater. Power sources: 2 connected in parallel with 400 A each Cutting is possible in the VA-area up to 100 mm separation cut, soft materials up to max. 50 mm. The system is in operation. Complete data about the retrofit on request

more

Listing

Baden-Württemberg, Deutschland

6,829 km

IN STOCK CNC Plasma Cutting Machine

Messer Easytherm 4600

Call

Condition: good (used), Year of construction: 2006, CNC portal flame cutting machine Manufacturer: Messer Type: Easytherm 4600 Year of manufacture: 2006 Control: Global Control Working area: 3 x 9 m Cw2aevg3 No table !! Table can be offered on request ! Runway length: 12 m with HEB carrier 1 oxyfuel torch ALFA 1 plasma torch with power source Kjellberg 160i plus Incl. marking Filter system Torit Own technicians for installation, commissioning and training available! All spare parts in stock. ME070923

more

Listing

Bydgoszcz

6,269 km

Otinus PCO-6020-DG

€31,310