Used Level Radar for sale (5,882)

Condition: excellent (used), 499 USED Shop oven, electric Miwe Aeromat 8.64. EXTERNAL DIMENSIONS (in cm): - W: 105 - L: 90 (123 with hood) - H: 210 TECHNICAL DATA: - 8 levels for 60x40 cm baking sheets - power supply: 400V 50Hz - power: 14 kW EQUIPMENT: - hood - steaming Pjdpfxjzrtalj Akhogr Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: excellent (used), Year of construction: 2005, 498 USED Shop oven, electric Miwe Aeromat AE 8.0604. EXTERNAL DIMENSIONS (in cm): - W: 90 - L: 100 Pjdpfozrr Uzjx Akhogr - H: 190 TECHNICAL DATA: - year of production: 2005 - 8 levels for 60x40 cm baking sheets - power supply: 400V 50Hz - power: 15,4 kW EQUIPMENT: - steaming Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. Our offer includes: bakery ovens, trolley ovens, shelf, deck ovens, confectionery ovens, shop ovens, electric ovens, oil ovens, gas ovens, thermal oil ovens, bakery machines, bakery equipment, bread lines, roll lines, dough lines, croissant lines, baguette machines, kneading machines, mixers, sheeters, and croissant makers. To see our full current offer, visit our Bakeres profile.

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 48800 € 932.08 € 40 -3200 U/min ISO 40 600 x 500 x 400 mm 1000 x 500 mm 3.75 kW 1814 kg 1000 mm/min 8 14 x 63 mm 300 kg 600 mm 500 mm 400 mm 0 - 600 mm/min. 0 - 600 mm/min. 40 - 3200 40 - 3200 +/- 90° ° 100 mm manuell 3,75 kW 1200 x 250 mm 160 - 660 mm 95 - 495 (2. T-Nut), 180 mm swiveling operating panel 3 axes digital read out Fagor 400ib Innova motor for horizontal- and vertical spindle: 3,75 kW feed motors with inverter for X/Y/Z: 0,75 / 0,75 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle Pedpfxoyrhrqj Akhogr spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Y/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules

Condition: new, Year of construction: 2026, Automatic Slitting & Cut To Length Line Coil Slitting and Cut To Length Production Line for Sheet Metal Processing The Automatic Slitting & Cut To Length Line is designed for longitudinal slitting and cross cutting of sheet metal coils into strips and flat sheets with programmable lengths. The production line combines several operations in one compact system: Coil feeding Slitting Precision leveling Servo length measuring Cut-to-length part Finished sheet conveying Automatic stacking The machine is suitable for processing galvanized steel, pre-painted steel and other coated sheet materials used in HVAC production, roofing, facade systems, roll forming and general sheet metal fabrication. Main Features Podpfx Aozrwhmokhsgr Combined slitting and cut-to-length production Fully automatic operation Hydraulic cutting system Precision sheet leveling Servo-controlled length measurement PLC controlled production Touchscreen operator interface High production accuracy Compact machine layout Reliable industrial construction Material Processing Suitable materials include: Galvanized steel (GI) Pre-painted galvanized steel (PPGI) Coated sheet steel The slitting section is equipped with hardened tooling designed for accurate strip production. The slitting system provides accurate strip widths with stable cutting quality during continuous production. The production line is equipped with an automatic hydraulic cut-to-length system. Typical cutting tolerance: ±2.5 mm for sheet lengths up to 5000 mm ±3.0 mm for sheet lengths between 5000 and 10000 mm Drive System The roll forming and feeding system is powered by: Main motor: 4 kW Hydraulic power unit: 3 kW Power transmission: Chain drive Industrial gearbox Heavy-duty mechanical transmission Control System Technical Specifications Parameter Specification Machine Type Automatic Slitting & Cut To Length Line Material GI / PPGI Maximum Coil Width 1000-1250 mm Material Thickness 0.25–0.1 mm Minimum Slitting Width 60 mm Heavy-duty 120 mm shaft diameter Maximum Number of Slitting Knives 5 Production Speed 10–15 m/min Main Motor 4 kW Hydraulic Power 3 kW Cutting Accuracy ±2.5 mm (≤5000 mm) / ±3 mm (5000–10000 mm) Cutting Type Hydraulic Cut To Length Transmission Chain Drive Machine Structure Wall Plate Frame + Column Cutting Structure Machine Dimensions Approx. 2500 × 1500 × 1400 mm Electrical Supply 380 V / 50 Hz / 3 Phase The production line is suitable for manufacturing: HVAC duct blanks Ventilation components Roofing sheets Wall cladding panels Roll forming blanks Sheet metal parts Laser cutting blanks Press blanks Electrical cabinet panels Industrial sheet products Advantages Slitting and cut-to-length in one production line Compact machine footprint High processing accuracy Low maintenance requirements Fast production changeover Automatic sheet stacking High productivity Reliable hydraulic cutting Precision leveling Suitable for continuous industrial production Standard Equipment Depending on customer requirements, the production line can be supplied with: Manual decoiler Hydraulic decoiler Double decoiler Coil loading car Protective film laminating unit Different slitting knife configurations Increased material thickness capacity Different coil widths 1.5 m conveyor table 3.0 m automatic stacking system

Condition: used, Year of construction: 2022, load capacity: 3,300 kg, lifting height: 9,070 mm, fork length: 1,200 mm, total length: 5,929 mm, · Max. Tragkraft 3300 kg · Max.Hubhöhe 9.07 m · Max. Auslage 6.35 m · Ausbrechkraft mit Schaufel 5770 daN · Schüttwinkel: 12 Grad · Kippwinkel 114 Grad · Heben: 8,90s Pgjdpjztga Isfx Akhjr · Senken: 5,70s · Wenderadius (über Räder): 3,80m · Teleskop ausfahren: 14,6s · Teleskop einfahren: 8,80s · Ankippen: 3,30s · Auskippen: 3,10s · Motomom: Stage V / Tier 4 final · Anzahl der Zylinder / Tragfähigkeit: 4 - 3621 cm³ · Nennleistung Verbrennungsmotor - Leistung (kW): 75 Hp / 55 kW · Max. Drehmoment / Motordrehzahl: 340 Nm @ 1600 rpm · Zugkraft 7320 daN · Anzahl der Gänge (v/h): 4/4 · Maximale Geschwindigkeit: 24,90 km/h · Hydraulikfördermenge / Hydraulikdruck: 92,7 l/min / 260 bar · Motoröl: 10l · Hydrauliköl: 128l · Fassungsvermögen des Kraftstofftanks: 120l · Geräuschpegel im Fahrerstand (LpA): 79 dB · Umgebungsgeräusch (LwA): 104 dB · Schwingungsbelastung Hand/Arm < 2.50 m/s² · Lenkräder (vorne / hinten) 2 / 2 · Sicherheit Zulassung der Kabine: Standard EN 15000 / Cabin ROPS - FOPS Level 2 · Max. Hubhöhe: 9,07 m · Max. Auslage: 6,35 m · Ausbrechwinkel mit Schaufel: 5770 daN

Condition: used, Year of construction: 2019, load capacity: 18,000 kg, lifting height: 9,630 mm, total length: 9,830 mm, - Max. Tragkraft 18000 kg - Schwerpunkt der Last 600 mm - Max. Hubhöhe 9.63 m - Max. Reichweite 5.56 m - Neigungswinkel nach unten 105 ° - Neigungswinkel nach oben 12 ° - Äußerer Wenderadius (über Reifen) 5.5 m - Äußerer Wenderadius (mit Gabeln) 6.15 m - Niveauausgleich Regler 10 ° - Motornorm Stage IV / Tier 4 Final - Motor Modell OM 934 LA. E4-3 - Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 5100 cm³ - Nennleistung Verbrennungsmotor / Leistung (kW) 176 Hp / 129 kW - Max. Drehmoment / Motordrehzahl 750 Nm@1600 rpm - Kühlsystem des Motors Wasser - Number of batteries 2 - Batterie / Batteriekapazität 12 V / 120 Ah - Zugkraft 15970 daN - Typ Hydrostatisch - Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 - Max. travel speed 25 km/h - Feststellbremse Automatische negative Handbremse - Betriebsbremse Hydraulik - Steigfähigkeit - beladen 37 % - Pumpenart Verstellpumpe - Hydraulikfluss - Hydraulikdruck 205 l/min - 350 Bar - Motoröl 21 l Podeztgg Uopfx Akhsgr - Hydrauliköl 290 l - Kapazität des Kraftstoffbehälters 315 l - Abgasnachbehandlung für Diesel (Typ AdBlue®) 63 l - Innenschallpegel (lpa) 80 dB(A) - Umgebungsgeräusch (LwA) 107 dB(A) - Vibrationswert an Händen/Armen < 2.5 m/s² - Sicherheit Zulassung der Kabine ROPS - FOPS cab (level 2) - Steuerungen JSM

Condition: excellent (used), Year of construction: 2013, Equipment: documentation/manual, Machine KraussMaffei KM650-4300 GX Clamping force kN: 6500 Clearance between tie bars ( h x v ) mm: 1110 x 960 Mould opening stroke mm: 1450 Mould height min. mm: 450 Mould height may. mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (mixing HPS-M) L/D ratio: 20 Injection pressure bar: 1839 Stroke volume cm3: 2290 Control version: MC5 Screen text: Germany Condition: Checked, ready to work Equipment: \- Anti-vibration levelling pads \- BluePower - Servo pump drive for lower energy consumption \- Wear resistant plasticizer, surcharge \- BluePower - Complete insulation of plasticizing cylinder for lower energy consumption \- 2 x pneumatic valve on moving platen for blow function \- 2 x pneumatic valve on fixed platen for blow function \- Pneumatic cascade control, 4-fold for hotrunner \- Hydraulic cascade control, 4-fold for hotrunner \- Conveyor control \- Mechanical robot interface according to EUROMAP 18 \- Hydr. actuated ejector plate including tapped holes and clearance holes in the moving platen for ejector bolts \- Hydraulic core pull system 2-fold on moving platen \- Hydraulic core pull system 2-fold on fixed platen \- Pneumatic core pull system 1-fold on moving platen \- Pneumatic core pull system 1-fold on fixed platen \- Pressure relief for hydraulic core pulls \- Pressure relief for hydraulic cascade valves \- 20 hotrunner control circuits \- Combination of sockets (3 Sockets, single phase, 2 CEE sockets 16 A, 1 CEE socket 32 A) \- Potential-free contact for signal "plasticizing" on socket HAN 3 A \- Switch over to holding pressure depending on cavity pressure (Kistler) \- Quality statistics \- Chip card reading unit \- Graph display and analysis package with 10 graphs Pgjdpjy Apdqofx Akher \- Trend graphics \- PV-closed loop control \- Interface for production data consisting of 5 potential free contacts inside the control cabinet \- 3 free programmable in- and outputs in the control cabinet: KraussMaffei Linear Robot LRX 350: \- Fully integrated control \- Horizontal stroke: 4000 mm \- Vertical stroke (telescopic): 2000 mm \- Demolding stroke: 1200 mm \- Maximum payload: 35 kg

Condition: good (used), Year of construction: 2013, Engel Victory 200/50 tech (2013) Technical Specifications: 1. Machine model: ENGEL VC 200/50 Tech 2. Clamping force: 500 kN (50 tons) 3. Opening stroke: 408 mm 4. Ejector stroke: 100 mm 5. Ejector force: 39.8 kN Injection Unit (30 mm screw): 1. Screw diameter: 30 mm 2. Max. swept volume: 99 cm³ 3. Max. screw speed: 480 rpm 4. Injection rate: 144 cm³/s 5. Increased injection rate: 95 cm³/s 6. Specific injection pressure: 1451 bar 7. Increased specific injection pressure: 2205 bar 8. Nozzle stroke: 230 mm 9. Nozzle contact force: 28.3 kN Pgsdpfxozmg Nve Akher Control panel : CC200 Core pull 2-fold - movable clamping plate Hotrunners 16 circuits. Nozzle orifice 12mm Multi-level conveyor belt, ENGEL safety guards for robots.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 043804 / 55060428, No minimum price – guaranteed sale to the highest bidder! Two machines are offered for sale as a package: 1. Lapping machine Bierther ELAP700-91S 2. Oil mist separator Donaldson B.V.B.A. DMC-MMC Both machines have recently been inspected and certified by DGUV. Data for the BIERTHER ELAP700-91S: TECHNICAL DETAILS Diameter of lapping disc: 700 mm Inner diameter of truing rings: 275 mm Number of truing rings: 3 Rated speed: 56 rpm MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Mains connection: 3P + N Fusing: 16 A Current consumption: 8 A Motor power: 2.2 kW Power of lapping compound pump: 55 W Sound pressure level: < 70 dB(A) Tank capacity: 10 l Compressed air connection: 4 bar Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,200 x 1,900 mm Height without pneumatics: 1,400 mm Weight without pneumatics: 750 kg Total weight: 900 kg EQUIPMENT Crossbeam for forklift attachment DGUV-certified Data for the DONALDSON B.V.B.A. DMC-MMC: TECHNICAL DETAILS Air volume flow rate: 2,000 m³/h MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 1,600 x 670 x 2,000 mm Weight: 200 kg Pjdpfx Akjztqxzjhogr EQUIPMENT DGUV-certified

Condition: used, Compact pub brewery with a 2-vessel brewhouse, tanks, bottling equipment, and utility systems. The system consists of the following components: 1. Malt mill (Summer 2017) Roller mill on a painted steel frame with a capacity of approx. 400 kg/h of malt (2.2 kW motor power), featuring a mechanism for fine, rapid adjustment of the roller gap and a bagging spout at the bottom. 2. Brewhouse (Wengert, 2018) Two-vessel brewhouse with a mash/wort kettle and a lauter tun made of stainless steel with copper-clad lids. The kettle (nominal capacity: 500 l) is equipped with a top-driven two-blade propeller agitator and is fired by a gas burner (Weishaupt). The lauter tun is equipped with a rake, a drop floor, and a side spent grain flap with a chute. The brewhouse features a control system (Movonik, 2017) for automating temperature control and agitator speed. The brewhouse is mounted on a stainless steel frame that includes a wort pump, control cabinet, control unit with touchscreen display, and various pipes, valves, and fittings. Wort cooling and aeration are provided by a freestanding two-stage plate heat exchanger and a wall-mounted wort aeration unit. 3. Fermentation/Storage/Pressure Tanks/Transport Tanks - Open fermentation vat (Speidel) with a capacity of 675 liters. The vat is equipped with a temperature sensor and temperature control unit, jacket cooling, a lid, and outlet lines at the bottom and in the lower section of the frame. - 5 cylindroconical fermentation and storage tanks (Mueller, 2017), each with a capacity of 1,250 liters, 2 cooling zones, and up to 3 bar of overpressure. Each tank is equipped with a temperature sensor, its own temperature control unit, a pressure gauge, a bung, a sampling tap, a cleaning line, and a discharge line with a manual valve. - One cylindroconical fermentation and storage tank (Mueller, 2017) with a capacity of 625 liters, 2 cooling zones, and an operating overpressure of up to 3 bar. The tank is equipped with a temperature sensor and temperature control, a pressure gauge, a bung, a sampling tap, and cleaning and discharge lines with manual valves. - 4 horizontal dispensing tanks (Mueller, 2017), each with a capacity of 520 liters, a cooling jacket, and up to 3.9 bar overpressure. The tanks are mounted on a shared stainless-steel truss structure. Each tank is equipped with: a temperature sensor and its own temperature control unit, sight glasses, a sampling valve, a hose-type level indicator, a pressure gauge, and a discharge line with a manual valve. A four-line CO₂ pressure-reducing station is also located on the side of the tank group. - Horizontal transport tank (Mueller, 2019) mounted on a frame with fork rails and jacket cooling. The tank has a capacity of 1,020 liters and can withstand up to 3.9 bar of overpressure. Equipped with a pressure gauge, safety valve, sight glasses, and a discharge line with a manual valve. Suitable for use with tank liners. 4. Filling - Batch bottle washing machine on a mobile stainless steel frame for processing up to 10 bottles per cleaning cycle. Additional equipment includes a centrifugal pump, a detergent tank, a fold-down stainless steel hood, and various pipes and fittings. - Filler for party cans and siphons (Leicht, 2018) with two filling stations. Semi-automatic, mounted on a stainless steel frame with various fittings and controls. 5. Utilities - Stainless steel hot water tank with electric reheating via screw-in heating elements with a power rating of 7... Psdpfxjztpxme Akhsgr

Condition: used, Year of construction: 2008, total length: 15,000 mm, total width: 3,100 mm, total height: 3,150 mm, overall weight: 15,000 kg, Equipment: CE marking, No. 04553 Drum dryer / firewood drying system S&Ü SHT 50 Used, year of construction 2008 Suitable for drying firewood as well as other bulk and piece materials, e.g. wood chips, sawdust or compost Container volume 58 m3 Filling volume approx. 50 m3 of bulk material Drum diameter 2500 mm Overall length approx. 15000 mm Overall width approx. 2900 mm Empty weight approx. 12530 kg Loading via filling hopper, e.g. by wheel loader or conveyor system Pedpfxsztrpze Akhegr Internal conveying spiral for transporting and turning the drying material Drum drive via electric geared motor and multiple-chain drive Drum speed adjustable via frequency converter Automatic drying operation with timer control Fan speed adjustable via frequency converter Hydraulically liftable filling hopper for unloading Unloading by reversing the direction of drum rotation Drying time depending on initial moisture content, type of material, hot air volume and temperature Typical drying time for firewood approx. 5 - 7 days at approx. 200 kW heating capacity Heat exchanger: Max. heating capacity approx. 250 kW At 90 °C water supply temperature Medium flow rate approx. 12 m3/h At 15 °C outside temperature Hydraulic unit 3 kW Fan 7.5 kW Drum drive 8 kW Noise emission approx. 98 dB(A) with optimum filling level Current consumption 45 A Fuse protection 63 A Voltage 400 V, 3L/PEN Frequency 50 Hz Hydraulic oil capacity 10 l Transport dimensions approx. 15000 x 3100 x 3150 mm LWH Weight approx. 15000 kg Sale on behalf of customer, ex location near 63452 Hanau, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex location

Condition: ready for operation (used), Year of construction: 2013, overall weight: 1,092 kg, load capacity: 90 kg, arm reach: 3,096 mm, number of axes: 6, This 6-axis KUKA KR 90 R3100 extra was manufactured in 2013. It features a load capacity of 90 kg and a range of 3096 mm, making it suitable for various applications. The machine includes a KUKA KRC4 control cabinet and a smartPAD teach pendant for enhanced usability. If you are looking to get high-quality robotic capabilities, consider the KUKA KR 90 R3100 extra robot arm we have for sale. Contact us for further details. Pgsdpfx Akozty Acjher - Controller Model: KRC4- Year of Manufacture (Robot): 2013- Year of Manufacture (Controller): 2013- Robot Weight: 1092 kg- Controller Weight: 150 kg- Load Capacity: 90 kg- Range: 3096 mm- Supply Voltage: 3x400V- Frequency: 50/60Hz- Full-Load Current: 20A- Mains Fuse: 25A- Included Accessories / Components:- KUKA KRC4 Control Cabinet- KUKA smartPAD Teach Pendant- Base mounting plate with leveling bolts- Upper arm extension fixture / junction box assembly

Condition: good (used), clear span: 2,700 mm, total length: 22,365 mm, load per truss pair (max.): 1,500 kg, shelf height: 2,200 mm, Technical data for the pallet racking system: Racking system: META (Thyssen) Type: Multipal S Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 22,365 mm Number of bays per racking row: 08 units, each 2,700 mm Number of levels including base level: 02 units Technical data for the volume: Pallet spaces per bay: 09 units Number of pallet spaces per row: 72 units Total number of pallet spaces: 72 units Based on: Load unit: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): approx. 500 kg Included in the scope of supply: 09x Pallet racking uprights, used Material color: Sendzimir galvanized Frame profile: SR85|20 Profile dimensions: 85 x 75 x 2.00 mm Including cross and diagonal braces, Base plates Podpszupayjfx Akhogr The uprights are pre-assembled (bolted frame) 2,200 mm high 1,100 mm deep 32x Pallet racking beams, used Material color: yellow Beam type: HN85|20 Box profile: 85 x 50 mm Connector: 3 hooks Clear width: 2,700 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load 64x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 36x Bolt anchors, new Manufacturer: Hilti Type designation: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Approved for: cracked concrete 18x Shims, used Material: Sendzimir galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and frame loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine. Pgedjzump Espfx Akhsr Manufacturer: Battenfeld-cincinnati Germany GmbH. Year of manufacture: 1999 Year of installation: 1999 Rated voltage: … V Maximum current consumption: … A Frequency: 50 Hz Required pressure: 6 bar Total weight: … kg Noise level: … dB Hydraulic pressure for the screen changer: Extrusion material output: 1000-1200 kg (filter-limited output: approx. 850 kg) Possible thickness: 1 – 5 mm Maximum width: approx. 1450-1480 mm Machine dimensions: as described in the layout. Battenfeld BEX-1-150-32-D-V / BEX 45-25E / 89-9436-3201 extruder machine Consisting of: Screw and barrel assembly, motor and drive system, control interface, and supporting auxiliary systems for feeding, thermal regulation, and downstream processing. Details: Feed station - 2x silos. 2 x metal separators - Degacan HE degassing elements, co-extruder Type BEX-1-150-32-D-V and BEX 45-25E / 89-9436-320 to produce sheets or coils. Main extruder composed of 7 heating zones and one vacuum zone. Co-extruder composed of 3 heating/cooling zones to control the polymer. Followed by 3 calenders with temperature controllers. Extrusion die - To be confirmed if included. Calender line setup. Betacontrol Mk1 thickness measuring system. Radioactive source has been removed. Calvatron corona treatment system. Kalvar Calvtron automatic coil changing system. Rollers and calibration table. End-of-line sheet separation and side cutting (slitting) machine. BC touch control interface. Full workshop manuals.

Year of construction: 2018, condition: used, Screw compressor Pgedpjzu Aibefx Akher Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: good (used), Year of construction: 1991, operating hours: 49,637 h, functionality: fully functional, machine/vehicle number: 9666, ram adjustment: 64 mm, conveyor belt width: 203 mm, pressing force: 50 t, control cabinet length: 940 mm, control cabinet width: 760 mm, stroke length: 1,651 mm, input voltage: 380 V, overall weight: 9,000 kg, control voltage: 24 V, sheet thickness steel (max.): 4 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 4 mm, Technical Data Manufacturer: BRUDERER AG Model: BSTA 50 EL CNC Machine Type: CNC High-Performance Punching Machine Year of Construction: 1991 Machine Number: 9666 Press Force: 500 kN (50 t) Connected Load: 40 kW Main Motor Power: 25 kW Supply Voltage: 380 V / 50 Hz Control Voltage: 24 V DC Compressed Air Connection: 6–10 bar Operating Hours: approx. 49,637 h Adjustable Stroke: 16–51 mm Mounting Space/Clamping Plate: 760 x 940 mm Main Drive: 22 kW Power Supply: 400 V / 50 Hz Table Area: 940 x 580 mm Strip Feed Height (adjustable): 50–140 mm Max. Strip Width: 203 mm Max. Material Thickness: 4 mm Dimensions of machine with BBV 202: 2390 x 1270 x 3090 mm Machine Weight: approx. 9000 kg Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Pjdpfozuur Usx Akhsgr Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Roller conveyors and stacking racks Technical documentation available Description Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available.

Condition: used, mileage: 62 km, power: 125 kW (169.95 HP), first registration: 05/2026, fuel type: diesel, overall weight: 3,025 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,450 mm, total width: 2,032 mm, total height: 1,981 mm, loading space length: 3,002 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1017. K004825 ----EQUIPMENT - Airbags: Side airbags, curtain airbags - Trailer hitch: Preparation (cable) - Exterior mirrors, electrically adjustable and foldable, heated - Glove compartment with damped flap closure - Heated rear window - Rear window wiper with rear window washer - Air conditioning - Fuel tank with a capacity of 70 liters - LED headlights - LED rear lights with exclusive light signature - Steering wheel: Multifunction leather steering wheel - Mobile phone interface with inductive charging - Engine: Manual DPF regeneration - Package: Exterior package - Package: Driver Assistance Package Plus - Package: Driver's cab seat package 47 "fabric" - Mud flaps, front and rear - Safety interior mirror, manually dimmable - Socket: 230V sockets, 400W - Partition made of metal, high - Interior trim level Life for vans - Door: Rear hinged doors - USB sockets (2x) - Front center console - Central locking + keyless start with Safe-Security - 4 speakers - 4-way adjustable driver and passenger seat - ABS Pgjdpfx Ajy N Ifmokhor - Airbag: Airbag for driver and passenger - Exterior mirrors, electrically adjustable and heated - Exterior mirror housings and door handles in black - Batteries: AGM vehicle battery 80 Ah - Brake light, third - Roof console, small - Digital cockpit - Tachometer - Three-point seat belts in the front - ESP - Parking assistance system in the rear area - Sliding door step, plastic - Entry handle on the passenger side - Single-tone horn - Electrical connection strip, 12-pole - High beam assistant "Light Assist" - Windshield in laminated safety glass - GVW: Permissible gross vehicle weight 2940 - 3025 kg - Warranty: 5-year factory warranty for DEU - Generator 230 A - Speed control, intelligent speed assist - Transmission: 8-speed automatic - Grab handles on the roof frame - Glove compartment with flap - Tailgate - Heating and ventilation system in the driver's cab - Interior trim: Side trim - Headrests (in the driver's cab) - LED 2-lights in the roof of the cargo/passenger compartment - LED headlights, daytime running lights - LED lights for the driver's cab - LED rear lights - Paint finish: Solid color - Steering wheel: Multifunction steering wheel - Headlight range adjustment - Center console, narrow - Mobile phone interface - Driver drowsiness detection and distraction detection - Emergency brake assist with pedestrian and cyclist detection - Emergency call system eCall - Package: Exterior package - Package: Driver's cab seat package, checkered fabric - Wheel arch cover - Radio 33 cm (13") touch color display - Tire pressure monitoring system - Diesel particulate filter and AdBlue system - Sliding door on the passenger side - Mud flaps, front - Power steering - Seats: Passenger seat - Lane keeping assist "Lane Assist" - Bumpers, front and rear in black - Partition made of metal, high - USB in the driver's cab (2) - First-aid kit, warning triangle and 2 warning vests - Traffic sign recognition and wrong-way driving warning - Tie-down points for securing cargo (8) - Prepared for VW Connect - Immobilizer, electronic - Heat-insulating glazing - Central locking + keyless start without Safe-Security - Registration: Complete vehicle registration ... and more ----The vehicle is not detailed! Delivery throughout Germany possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle in part exchange. Financing / leasing possible even without a down payment! Do you ha

Condition: used, Year of construction: 2004, Technical details: length: 6006 mm width: 2440 mm height: 2590 mm motor power: 22 kw sound level: 66 dB(A) rated capacity: 22 KW operating pressure: 8.0 bar revolutions per minute of the motor:: 2.945 U/min temperature range: 3 - 45 °C Psdsyx Tnrepfx Akhsgr weight of the machine ca.: Auf Anfrage t 20-foot container Compressor station – sound-insulated container with 2 compressor units 2 units SPX Hankison GmbH Type HHL 450 – a compressed air adsorption dryer (desiccant air dryer) for industrial compressed air systems. It is used to remove moisture from compressed air to prevent corrosion or freezing in machines, valves, or pneumatic systems. SPX Hankison HHL 450 Manufacturer: SPX Hankison Type: HHL 450 Design: Heatless desiccant dryer Max. operating pressure: 16 bar Connection: 2" NPT Series: HHL / HHS / HHE compressed air dryers These units operate with desiccant material (adsorption granulate) that binds water vapor from the compressed air. *

Condition: used, Year of construction: 1998, functionality: fully functional, On offer: LEADTECH throughfeed grinder – 2 grinding units + sanding shoe, working width 400 mm. The machine is used, has undergone technical inspection, is fully functional, and ready for operation. Before purchase, it can be started and thoroughly inspected at our company’s premises. The machine’s greatest advantage is the arrangement of two grinding units complemented by a sanding shoe, which enables both surface leveling and more precise finishing. The first unit is equipped with a rubber roller with a diameter of 210 mm, while the second unit has a rubber roller Ø110 mm, a sanding shoe, and a metal roller Ø75 mm. Pneumatic oscillation ensures proper guidance of the abrasive belt during operation. Specifications: • manufacturer: LEADTECH • year of manufacture: 1998 • maximum working width: 400 mm • maximum working height: 130 mm Pedezubxuspfx Akhegr • number of grinding units: 2 • first unit: rubber grinding roller Ø210 mm • second unit: rubber roller Ø110 mm, sanding shoe, and metal roller Ø75 mm • width of sanding shoe: 400 mm • main motor power: 11 kW • manual adjustment of working height • pneumatic oscillation of abrasive belt • width of conveyor: 400 mm • length of conveyor: 1100 mm • dust extraction outlets: 2 × Ø120 mm • weight: approximately 550 kg • overall dimensions: 150 × 86 × 155 cm (L × W × H) Applications: • sanding of solid wood components • sanding of panels and glued components • leveling and calibrating surfaces • intermediate sanding • finishing sanding using the sanding shoe • preparation of surfaces for painting, oiling, or further processing • processing of components with a width of up to 400 mm and a height of up to 130 mm Additional information: • the photos show the actual condition of the offered machine • free training on machine operation at our company’s premises • the price stated in the auction applies to export sales/intra-community supply with a VAT rate of 0%; for domestic sales, 23% VAT will be added Financing and transport: • we arrange transport using our own MDD fleet or through external carriers • we assist in obtaining leasing or loan financing • delivery costs depend on the destination and the method of transport

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Rexroth, hydraulic power unit, hydraulic station -Type: Rexroth AHAG -Pressure: 250 bar -Flow rate: 42 l/min / 2 working circuits -Motor: ABB 11 kW / 1455 rpm -Hydraulic reservoir: Tank capacity 160 l with level indicator Psdpfx Asy D Hhvjkhsgr -Return filter: RFBNHC 330F10 A1.X -Pressure reservoir: Hydac, capacity 10 l -Individual components: see photos -Dimensions: 1340/680/H1500 mm -Weight: 484 kg

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Materials to be slit: • Paper-based / liner-based packaging laminates. Pgjdpoyx Uy Aofx Akhor • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: new, Year of construction: 2026, The HDE Series Hopper Dryers are designed for efficient drying of plastic granules before extrusion, injection molding, and blow molding processes. Moisture contained in plastic materials can cause defects such as bubbles, silver streaks, poor surface finish, and reduced mechanical properties. The HDT Series effectively removes surface moisture using a controlled hot-air circulation system, ensuring stable processing conditions and consistent product quality. All material-contact surfaces are manufactured from stainless steel, preventing material contamination while providing excellent corrosion resistance and long service life. The precision cast aluminum hopper offers excellent heat retention and ensures uniform drying throughout the entire material batch. A specially designed hot-air diffuser distributes heated air evenly inside the hopper, significantly improving drying efficiency. The low-noise blower delivers stable airflow while preventing dust from entering the material. The hopper is equipped with a material level inspection window, an auto loader mounting port, and safety systems protecting against overheating and motor overload. The modular design allows quick cleaning and fast material changes, making the HDT Series suitable for continuous industrial operation Technical Specifications Hopper Dryer HDE-25 • Hopper Capacity: 25 kg • Blower Power: 135 W • Heater Power: 3.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 3.6 kW • Installation Size: 150 × 150 mm • Dimensions (L × W × H): 830 × 580 × 840 mm • Weight: 34 kg Hopper Dryer HDE-50 • Hopper Capacity: 50 kg • Blower Power: 155 W • Heater Power: 4.5 kW Pgedpfx Akezv Emljhjr • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 4.7 kW • Installation Size: 160 × 160 mm • Dimensions (L × W × H): 920 × 590 × 940 mm • Weight: 45 kg Hopper Dryer HDE-100 Technical Specifications • Hopper Capacity: 100 kg • Blower Power: 215 W • Heater Power: 6.5 kW • Maximum Drying Temperature: 140°C • Power Supply: 380 V, 3-Phase, 50 Hz • Control Voltage: 220 V, Single Phase, 50 Hz • Total Installed Power: 6.7 kW • Installation Size: 178 × 178 mm • Dimensions (L × W × H): 1070 × 700 × 1080 mm • Weight: 68 kg

Condition: used, mileage: 85,000 km, power: 100 kW (135.96 HP), first registration: 12/2020, fuel type: gas, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space volume: 19 m³, loading space length: 4,200 mm, loading space width: 2,060 mm, loading space height: 2,300 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Special equipment: Storage compartment on the dashboard with USB connection, dashboard comfort features, audio system: digital audio system (DAB) with USB and Bluetooth hands-free system, body manufacturer interface, vehicle key with remote control, rear axle suspension: parabolic (reinforced, level 2), programmable speed limiter, steering column (steering wheel) adjustable in height and length, smoker's package, spare wheel in driving condition, seats in the cab: driver's seat comfort (hydraulic). Additional equipment: Airbag on driver's side, trailer stabilization program (TSM), trailer socket preparation, anti-slip regulation (ASR), dashboard comfort blue, design: Blue Power, design: S-series, exterior mirrors electrically adjustable and heated, brake assistant, electronic brake force distribution, front axle suspension: transverse leaf spring, windshield and side windows tinted, generator 210 A, speed limiter 160 km/h, body/superstructure: standard platform, fuel tank: 70 liters, radiator grille blue, engine 3.0 liters - 100 kW CNG, wheelbase 4100 mm, low emissions according to emission standard Euro 6d, seats in the cab: double passenger seat, maintenance indicator, permissible total weight 3.50 t. The vehicle is in good condition! Load compartment interior: L 4.20 m W 2.06 m H 2.30 m Pjdpfx Akszvw Hwjhogr Payload 350 kg Tail lift: Hollandia 500 kg Side door New TÜV and emissions test available for an extra charge. Financing possible through Santander Bank.

Condition: used, mileage: 78,315 km, power: 125 kW (169.95 HP), first registration: 04/2021, fuel type: diesel, overall weight: 3,500 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,981 mm, total width: 2,059 mm, total height: 2,786 mm, loading space length: 3,350 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and omissions excepted! Internal number: 1212. MM37862 ----EQUIPMENT * Airbag (passenger side) * Paint: Metallic * Visibility Package III - Exterior mirrors, electrically foldable - Lane Keeping Assist with Driver Alert and High Beam Assist - Windshield, heated - High-mounted LED exterior light "Downlight" - Adjustable instrument lighting - Front and rear Park Pilot System - Rearview camera with image display of the rear driving path on the display - Windshield wipers with rain sensor - Headlight Assist with day/night sensor - Washer fluid level sensor * Seat Package 15 - Driver's seat, 4-way adjustable (fore/aft, backrest, seat cushion tilt, height) - Double passenger seat with storage compartment under individually folding seat cushions - Headrests, height-adjustable - Tray integrated in the double passenger seat (foldable) - Seat heating for driver - Seat heating for passenger - Interior armrest for driver - Lumbar support, manual (driver's seat) - Seat upholstery: Fabric Podpfxszu D Hzj Akhegr * Blind Spot Information System including Cross Traffic Alert (Trend) - Exterior mirrors, electrically foldable * Anti-lock Braking System with Electronic Brakeforce Distribution (EBD) * Axle load increase - front to 1850 kg * Airbag, driver side * Exterior mirrors, electrically adjustable and heated - with integrated turn signals * Xenon: Bi-Xenon headlights with static cornering lights, LED daytime running lights including automatic headlight leveling * On-board computer with consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, high * Double-wing rear door with 180° opening angle (without windows) * Tachometer * Third brake light * Electronic Stability Program (ESP) with Traction Control (TCS) - Hill Start Assist - Side Wind Assist - Emergency Brake Assist - Rollover protection * Front power windows - with Quickdown/up function for the driver's side * Ford Easy Fuel - Comfort fuel filler and misfueling protection * Generator, high-performance version * Cruise control including leather steering wheel - Steering wheel with audio remote control (operation of the audio system and the on-board computer) * Transmission: 6-speed automatic * Glove compartment with locking lid * Interior lighting with delay function with reading lights in the front * Air conditioning in the front including dust and pollen filter * Cargo area lighting * Cargo area floor: Vinyl flooring "Easy Clean" * Leather shift knob * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Fog lights * Emergency brake assist including hazard warning lights * Front and rear Park Pilot System - additionally with side sensors * Particulate filter: Diesel particulate filter * Radio: Audio System 24: Ford Audio System including Ford SYNC3 with AppLink, DAB/DAB+, navigation system, radio (FM/AM), 8" touchscreen multi-display (20.32 cm), 4 speakers, FordPass Connect WLAN hotspot, integrated control panel and audio remote control on the steering wheel, Ford SYNC 3 with touchscreen (hands-free system with voice control, SMS read/send function, Bluetooth, emergency call assist...), AppLink (enhanced voice control, private mode, support for Android Auto and Apple CarPlay, capacitive touchscreen technology, ...), dynamic navigation, lane recommendation, road map for Western Europe * Alloy wheels * Headlights with static cornering lights * Sliding door entry light automatically activated w

Condition: used, Year of construction: 2018, machine/vehicle number: LC655, Used COMAC can line for beer 6000 CPHTechnical Specifications & Performance DataThis complete can bottling line engineered around a filling and seaming monoblock is designed for efficient beverage production in industrial packaging environments. Optimized for carbonated beer, it provides reliable performance for standard can formats with precise isobaric filling and robust quality control. As a used bottling line, it offers second hand value with professional features suitable for modern beverage production.Product: Carbonated beerFilling temperature: 2–4°CCO₂ quantity: up to 5.5 g/LProduction speed (reference): 6,000 cph on 0.33L; 5,500 cph on 0.44LContainer types: Two-piece aluminum cans with SOTCan formats: Compatible with 0.33L and 0.44LDiameter: 66 mmClosure: 202 can endRequired product pressure: 3–4 barRequired water pressure: 3–4 barRequired air pressure: 6 barRequired CO₂ pressure: 6–8 barFilling monoblock: ISO 14-2 (14 isobaric valves, 2 seaming chucks)Depalletizer pallet sizes: 1,120 × 1,300 mm (standard), 1,120 × 1,420 mm (optional)Depalletizer discharge height: 3,370 mm; max pallet height 2,813 mmRinser tunnel length: 2,380 mm; ionized air with HEPA filtration (99.97% at 0.3 µm)Automation: Siemens PLCs and HMI across key stationsAdvanced Automation & Control SystemsThe line integrates modern automation with operator-friendly HMIs for streamlined control and repeatable changeovers. Electrical and pneumatic systems are built for beverage production reliability, enabling precise handling of carbonated products.Control architecture: Siemens PLC Logo 7/2 on depalletizer; Siemens S7-1200 PLC with Weintek 7" touch screen on the labeling machine; Siemens touch screen and PLC on the monoblockDrive technology: SEW 4 kW motor for seaming rotation; frequency converters on key drivesAutomated height adjustment: Brushless motorized recipe-based can size changes via HMISensors & inspection: Photoelectric/inductive lid presence, X-ray fill level (min/max), transparent label photocellSafety: Stainless steel guards with interlocks, wire-mesh fencing, emergency protections, IP55 stainless enclosure on the inkjet coderClean operation: Ionized air cleaning with HEPA filter; undercover CO₂ injection and bubble breaker; dummy cans for CIP (up to 80°C)Production Line Integration CapabilitiesDesigned as a coherent packaging machinery set, this used bottling line supports inline operation from depalletizing through filling, inspection, coding, labeling, and discharge. Format changes between 0.33L and 0.44L are rapid thanks to automated adjustments and dedicated change parts. Pjdpfezmgccjx Akhjgr