Used Lever Shears for sale (3,062)

Condition: ready for operation (used), functionality: fully functional, Peddinghaus Peddycut 275 6-way combined section steel shear Available immediately from site: Peddinghaus section steel shear Type Peddycut 275 Year of manufacture 1987 Pressure capacity 27 tons Table 400 x 250 mm Thrust 90 mm Power 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square bar 25 mm Knife pitch 175 mm Gsdpfxswfdbps Ah Hsil Punch stroke 24 mm Punches 20 mm in 19 mm or 30 mm in 6.5 mm sheet Foot switch Various punches Transport: from site

Condition: excellent (used), functionality: fully functional, Performance: 1000 x 3.5 mm; light barrier, - electric foot switch - left side stop 600 mm, two supports each 600 mm - central lubrication Gijdpfxjx Hqurj Ah Hjl - Ortlinghaus brake-clutch combination - switchable between high holding position or as a tilting roller table .

Condition: used, Year of construction: 2020, Attachment suited for: Construction machines Gjdpfox I Dpxex Ah Hsil

Condition: good (used), Pneumatic valve, roller lever valve, limit switch, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, switching valve, pressure build-up valve -Manufacturer: Festo, pneumatic valve, roller lever valve -Type: 8982 L-3-1/4 B Godpexx Sm Refx Ah Hjil -Operating pressure: 0.95...10 bar -Number: 4x valves available -Price: per piece -Dimensions: 105/50/25 mm -Weight: 0.2 kg/pc.

Condition: used, Year of construction: 2010, working width: 2,500 mm, sheet thickness steel (max.): 15 mm, Equipment: foot remote control, Electric guillotine Schroder with mechanical back rest. Recently serviced. Knives in good condition. Guillotine fully functional, can be tested. Specification: Model: Schroder MHSU Year: 2010 Made in: Germany Working length: 2 500 mm Giodowq Dqhjpfx Ah Hjl Max cutting thickness: 1.5 mm Back rest: mechanical Weight: 1260 kg

Condition: reconditioned (used), functionality: fully functional, Rotary shear, twin-shaft shredder, Drive power: 110 kW (2 x 55 kW), Rated current: 210 amps Blade width: 75 mm Cutting unit size: length 1600 mm x width 980 mm Quick-change blade system, SEW gearbox, Including hydraulic pusher, hydraulic rated power: 7.5 kW, Giedewva Hiepfx Ah Hel Control cabinet, Cutting unit overhauled, Dimensions: Length approx. 6150 mm x width approx. 3100 mm x height approx. 3150 mm, Total weight: approx. 17 t

Condition: excellent (used), Year of construction: 2009, operating hours: 16,800 h, functionality: fully functional, cutting force: 600 t, power: 242.71 kW (329.99 HP), Lefort Mobile 600 Tons Shear force: 600 t Hold-down force: 120 t Pusher force: 180 t Lid closing force: 240 t Box height: 600 mm Box width: 800 mm Box depth: 6000 mm Gijdeuptrpspfx Ah Hjl Available immediately

Condition: used, total length: 6,400 mm, Weight: 17.500 kg Price: On request - Documentation available: Yes Giedpswnhp Nefx Ah Hjl - CE certificate present: No - Serial number: 13707 - Drive system: Conventional - Control system brand: Elgo - Drive type: Hydraulic - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 6200 - Throat depth [mm]: 60 - Backgauge depth [mm]: 1000 - Transport weight [kg]: 17500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2023, The long boom mounted demolition shear is a hydraulically powered demolition tool designed specifically for demolition of tall buildings or hard-to-reach structures. These shears are usually mounted on long boom excavators and their powerful cutting capabilities facilitate demolition operations by cutting concrete, steel and other solid materials quickly and efficiently. Godpfx Ajqd Rbwjh Hoil

Condition: good (used), functionality: fully functional, Well-maintained and lightly used circular shear from the top manufacturer Prinzing. Please refer to the pictures for technical data. A video can be sent via WhatsApp. Godpfjx Ekc Hjx Ah Hjil

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT Gjdpfx Ahex Da D Us Hjil or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: excellent (used), Year of construction: 2000, Diemer residual wood shear ASC 65 - 25 Infeed dimensions 650mm x 250mm Gedewu Nwnjpfx Ah Heil with infeed vibrating trough

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Haco hydraulic guillotine shear type TS 406 working width 4050 mm maximum sheet thickness 6 mm motorised back gauge Giodpfx Aexwmv Dsh Hjl cutting gap adjustment cutting angle adjustment

Condition: used, total length: 3,600 mm, total width: 2,440 mm, total height: 1,950 mm, Weight: 13.500 kg Price: On request Cutting bench, cutting shear Type: Hydraulic Manufacturer: Darley Type: GS3020 Control: Conventional Cutting width: 3100mm Cutting thickness: 20mm Electric Backgauge: 1000mm Gedpfxownh Hbj Ah Hoil Motor-power: 30kW Incl. multiple frontloader-arm Total dimensions: 3600x2440x1950mm Machine-weight: 13500kg - Documentation available: No - CE certificate present: No - Transport dimensions: 3600mm x 2440mm x 1950mm (l x w x h) - Transport weight [kg]: 13500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, cutting force: 700 t, power: 300 kW (407.89 HP), empty load weight: 1,15,000 kg, total width: 3,000 mm, total length: 17,000 mm, total height: 4,000 mm, overall weight: 91,000 kg, cutting length (max.): 7,100 mm, year of last overhaul: 2024, pressure: 360 bar, Taurus K773.L1E Cutting force 700 tons Cutting width 950 mm ( blade 1000 mm ) Cutting height 650 mm Box 7100 mm rammer 900 kN Central lubrication system Included 300 kW drive power Revision 2024 (year of construction 2006) Revision includes the following work: - Replacing the HARDOX carriage guides - Replacing the carbon guides on the blade carriage - Installation of new knife seats top/bottom - Installation of new blades and screws top/bottom - Welding on the worn parts in the scissor mouth - Dismantling of both covers, fitting new hinges, fitting new shafts, reassembly Giedpfouptmysx Ah Hol - Overhaul of all 4 HPR 160D pumps at LINDE Poland - Sealing the valves on the left/right valve bank - Installation of new piston rod feed (180 x 8.29 m) - Installation of new feed guide bushes incl. sealing package - Overlay welding of feed block and hold-down device, followed by milling to size - Inspection of side cylinders, in some cases installation of new seal packs, if required - Replacing piston rods and honing pipes - General repair work on hydraulic pipes, clamps, in some cases - Replacement of damaged hoses - General repair work on structure, covers and platform construction - Repainting of the system - Steel frame for mounting the machine Ready for immediate use. Available from December 2024 with repainting

Condition: good (used), Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Manufacturer: Yale, lever chain hoist -Load capacity: 3/4 ton -Chain length: 5 m / 5.3 m -Quantity: 1 pieces -Price: per piece -Transport dimensions: 600/160/H150 mm Gisdpfxjwzvqzs Ah Hol -Weight: 11.1 kg

Condition: excellent (used), functionality: fully functional, Cutting length: 2520 mm Sheet thickness at 400N/mm²: 4.0 mm Strokes per minute: 47 Back gauge approx.: 750 mm Throat depth: 350 mm . Very good original condition! . Equipment: Left side gauge, 750 mm Cutting gap adjustment Back gauge with vernier scale and magnifier (and light) Overload protection . Other: Both blades are sharp and have not yet been shimmed Giedpfx Ahjx A S D De Hsl The cylinders are dry

Condition: like new (used), Year of construction: 2023, operating hours: 3,000 h, functionality: fully functional, For sale is a mobile Lefort scrap shear. The machine is in very good condition and can be inspected at any time. Gsdpfsx Elyajx Ah Hoil

Condition: excellent (used), Year of construction: 2025, General information Field of application: Construction Reference number: 5 Weights Empty weight: 500 kg Functional CE mark: yes Condition Giodpsq Ixt Aofx Ah Hel Technical condition: very good Visual appearance: very good Other information Fits to following machines: 5~12ton excavator Delivery terms: CIF Working pressure: 190-210 bar Production country: KR Additional information Please contact Ö. Inalkac for more information ASH-50H is a Mini Shear with hydraulic rotation. This model is suitable for excavator 5~12 ton. ASH-50H Shear is one of the models that we have on stock in our warehouse, located in The Netherlands. Please contact us for more details. scissors, scrap shear cisaille ścinanienożyczki tijeras škare olló nůžky saks tesouras foarfece Schere žirklės ножницы forbici

Condition: used, Year of construction: 2008, Cutting bench, cutting shear Type: Hydraulic Manufacturer: Colmal Type: HS 40-13 Year: 2008 Controller: Delem DAC-350 Cutting width: 4050 mm Max. thickness: 13mm Incl. documentation and peripherals Incl. outfeed-conveyor Machine dimensions: 4800x2400x2650mm Machine weight: 15000kg Godpewng Rxefx Ah Hsil - Year: 2008 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2025, General information Field of application: Construction Reference number: 2 Weights Empty weight: 500 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Other information Fits to following machines: 5-12ton Delivery terms: EXW Working pressure: 190-210 bar Production country: KR Additional information Please contact Ö. Inalkac for more information ASH-52H is a Mini Scrap/ Metal Shear with hydraulic rotation and double cylinder. This model is suitable for excavator 5~12 ton. Godpfeq Ixunex Ah Hoil ASH-52H Shear is one of the models that we have on stock in our warehouse, located in The Netherlands. Please contact us for more details. scissors, scrap shear cisaille ścinanienożyczki tijeras škare olló ножици ψαλίδια nůžky saks tesouras foarfece Schere žirklės ножницы forbici sax

Condition: used, total length: 5,500 mm, total width: 2,400 mm, total height: 2,100 mm, Weight: 12.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 5150 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 1 Gjdpfx Ahswng Nhj Heil Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, Year of construction: 2026, General information Field of application: Construction Weights Empty weight: 1.900 kg Functional CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Giedpjqmnbwsfx Ah Hel Other information Fits to following machines: 18~28ton excavator Working pressure: 320 bar Cutting power: 320 kN Required hydraulic flow: 180 l/min Additional information Please contact Ö. Inalkac for more information AJCE Europe APL20RV pulverizer with hydraulic rotation is a top quality product. APL20RV pulverizer/crusher is 1850kg and fits on 18~28ton excavator. APL20RV pulverizer/ crusher has changable tooth plate and has also speed up valve. Contact us for details. concrete crusher/ Pulverizer/ broyeur/ cisaille/ HYDRAULISCHE BETONPULVERISIERER/ MEHRZWECKSCHEREN/ ABBRUCHSCHEREN/ TRITURADOR DE HORMIGÓN HIDRÁULICO/ TRITURADOR DE HORMIGÓN/ CIZALLA DE DEMOLICIÓN/ DRVICE/ ABBRUCHZANGE/ PULVERISIERER

Condition: used, Year of construction: 2007, Knipbank knipschaar plaatschaar Type: Hydraulisch Fabrikant: Jean Perrot Type: CSE 3G 6006 Bouwjaar: 2007 CNC: SEW DOP11A Knipbreedte: 6050mm Knipdikte: 6mm Elektrische achteraanslag Motorvermogen: 15kW Machine-afmetingen voor transport: 7400x2450x2250mm Machine-gewicht: 19000kg Giodewng Rrepfx Ah Hsl - Year: 2007 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1998, Cutting bench, cutting shear Type: Hydraulic Manufacturer: GWF Mengele Type: S8-4000 Year: 2005 Control: Siemens Simatic Cutting width: 4050mm Cutting thickness: 8mm Gisdswnhlqjpfx Ah Hol Electric Backgauge: 1000mm Throat: 180mm Motor-power: 22kW Incl. multiple frontloader-arms: 2500mm Total dimensions: 4700x2550x2300mm Machine-weight: 13000kg Video available - Year: 1998 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum