Used Lever Punch for sale (3,497)

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Pressing force 100 ton (1000 kN) Dsdpfx Aogp T Eujdkjku Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition

Condition: good (used), Renz Punch 500 Perforator Dksdoxk U Hwepfx Adksu This machine is in very good condition. The set includes the original machine base. Electric drive, foot pedal control. The set includes a 3:1 round hole perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 500 mm Device designed for continuous operation and heavy loads Foot pedal-operated operation Perforation of up to 40 sheets (4 mm) in a single cycle Quick and easy replacement of perforation strips Ability to use strips with or without a suspension slot Ability to use QSA strips (quick format change by disabling selected needles without having to remove the strip) Ability to use two-piece strips – one tool allows for perforation of both books without a suspension slot and calendars with a suspension slot (in this case, perforation without a suspension slot up to 465 mm) Machine operates on a 3-phase power supply Weight: 120 kg + 50 kg base.

Condition: used, Year of construction: 2004, Dimensions (LxBxH): 150 x 65 x 40 cm Dedpfxovlypqo Adkjku

Condition: new, Year of construction: 2025, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Dkodpfx Adsuzv Tzskju Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: excellent (used), Year of construction: 2015, Machine type: Punching and shearing center * Model: S4Xe.40 * Year of manufacture: 2015 * Manufacturer: Salvagnini Machine type: Sheet metal bending machine * Model: P4L-3220 * Year of manufacture: 2019 * Manufacturer: Salvagnini Machine type: Handling system * Type: SiX-ACN * Year of manufacture: 2015 * Manufacturer: Salvagnini * Technical specifications: Voltage: 400 V * Frequency: 50 Hz * Phases: 3 * Rated current: 36 A Dksdpfsv Tygxex Adksu * Short-circuit current: 10 kA * Maximum motor current: 28.7 A * Protection class: IP54

Condition: used, Year of construction: 2000, plate punches 1. Beil 780-S-St - 3-hole 780/425 - table 1000-1400 2. Bacher 2005 - 2-hole 425 - table 730-1000 3. Bacher 2045 - 2-hole 425 - table 730-1000 4. Beil 425-T-H - 2-hole 425 - table 520-770 5. Stanze 2-hole 425 - table 420-660 - metal frame - SOLD 6. Billows 2-hole 225 - table 650-950 7. Bacher 2032 2-hole 225 - table 300-400 (4) - 1x SOLD 8. Heidelberg SM52 - 425 plate punch 9. Heidelberg SM52 - plate bender - SOLD Dkjdpfx Adocqxv Tokju

Condition: good (used), Renz Punch Super 700 Perforator This machine is in very good condition. Electric drive, foot pedal control. Dedpfx Adoxk U Hqsksku Includes a 3:1 square perforation tool with a cutout for the hanger. Manufacturer’s description: Perforation device with a working width of up to 700 mm Designed for continuous operation and heavy loads Foot pedal-activated operation Perforation of up to 40 sheets (4.5 mm) in a single cycle Quick and easy replacement of perforation strips Available with or without a hanger cutout Two-piece strips can be used – one tool allows for perforation of both books without a hanger cutout and calendars with a hanger cutout. Requires a 3-phase, 380V power supply. Weight: 400 kg

Condition: ready for operation (used), Year of construction: 1998, operating hours: 30,430 h, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, punching diameter: 76 mm, TECHNICAL DETAILS Dsdpfoxhfu Hsx Adkjku Pressing force: 220 kN Maximum sheet thickness: 6.4 mm Punching diameter: 76.2 mm X-axis travel: 2,500 mm Y-axis travel: 1,250 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Positioning speed (simulation): 108 m/min Positioning speed rotary axis: 360 °/sec Workpiece weight: 150 kg Smallest programmable increment: 0.01 mm or 0.01° Tool stations: 15 units Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions: 6,400 x 5,800 x 2,100 mm Approx. machine weight: 11,050 kg Operating hours: 30,430 h

Condition: excellent (used), Year of construction: 2003, operating hours: 31,486 h, Medium format Dsdpexl R I Tefx Adkeku Operating hours: 31,486 h Price on request

Condition: good (used), Year of construction: 2027, Large format, machine no.: A0060A0763. Control system: Trumpf/Siemens 840 D. Max. punching force: 220 kN. Max. sheet thickness: 8 mm. Max. punching force: 220 kN. Simultaneous X/Y axis speed: 116 m/min. Punching stroke rate: 1,000 strokes/min. Marking stroke rate: 2,800 rpm. 21 tools on 4 tool holders. Max. working width: 3,000 mm. Support table, custom-made. Support table with vacuum lifter. Working width extended to 6,000 mm in manual mode. Sensor-based stripper monitoring. Light sensor on the punching head. Compressed air connection: 7-14 bar. Equipped with Gripmaster, manufacturer: Trumpf, serial no.: 0415045, retractable. Chip conveyor, manufacturer: Schlepp. Cooling water unit. Tool spray lubrication. Control cabinet. Automation: Trumpf SheetMaster, year 2007, length approx. 10,500 mm. Vacuum lifter. Stacking system, manufacturer: Stopa, type HZIE-501305, year 2007, load capacity 3,000 kg. Stacking system, manufacturer: Stopa, type HZIE-501300, year 2007, load capacity 3,000 kg. Dedpfsxl Dypox Adkjku

Condition: excellent (used), Trumpf CS 20 copier punch Dsdpfx Asvmrcrodkoku Manufacturer: Trumpf Type: CS 20 Control unit: conventional Incl. various accessories as per photos Year of construction: 10/1976 Weight: approx. 6000kg Complete documentation is available. Inspection under power can be arranged at short notice. We are happy to answer any further questions you may have. Price, ex warehouse, plus VAT. Condition: good - ready for demonstration Delivery: ex warehouse - as viewed Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: good (used), Busch B+P Ram punch, label die cutter A professional machine made in Germany. Very good condition. The Bush company is a leader in the production of pallet turners and pushers. 100% efficient, ready for production. This is the currently produced model. Technical data: Max. format 230 x 230 mm Dedpfx Aexddh Redksku Number of cycles 13/min Max. input 170mm Efficiency 780,000 sheets/h Weight 860kg The machine has a hydraulic quick-acting unit. Clamps for mounting dies, axial adjustment of dies. Feed table adjustable in every plane. Two operating modes: semi-automatic, manual. Tail on the delivery.

Condition: used, Druckpalttenstanze  - Plate Punch Bacher 2048 Dodpfoxg D Dwsx Adkjku Palttenstanze / Plate Punch Bacher 2048 Serial-No. 277 Druckplattenstanze für Heidelberg SM74, SORM Plate Punch for Heidelberg SM74, SORM Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, punching force: 22 t, sheet thickness (max.): 6 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,500 mm, TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Max. punching force: 220 kN Max. sheet thickness: 6 mm Dkodpexhfnaefx Adkou MACHINE DETAILS Dimensions & Weight Dimensions: 7,500 x 7,500 x 2,500 mm Approx. machine weight: 17,500 kg

Condition: excellent (used), Year of construction: 2014, Operating hours: 78,000 hours Dkjdpfx Adswd Ng Uekju 5 kW resonator Annual maintenance by Trumpf

Condition: excellent (used), Year of construction: 2018, operating hours: 21,346 h, functionality: fully functional, laser power: 3,200 W, X working area max.: 3000 mm Y working area max.: 1600 mm Control: Rexroth IndraMotion MTX Laser power: 3000 watts Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Maintenance-free three-phase motors for drives - Repositioning device with programmable hold-down - Foot pedal for clamp closing - Beam protection with direct access - Parts chute on the right - Parts flap on the left - Sensor for parts flap - Work area illumination - FocusLine - Retrofittable for SortMaster Compact - Protective tool - Transport and installation device TRUMPF Laser - Laser light cable (LLK) according to standard layout (10m) - Laser power control - Laser logbook function - Closed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit Djdpfx Adoxhmtwjkeku - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punching Head - Delta Drive - Rotatable mono-tool adapter - Programmable hold-down position - Tool length compensation - Punch spray lubrication - Punch slug extraction - Forming function - Stroke counter for punch Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color screen - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Auto shut-off with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Extended Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Chiller (water-air) - Compact dust extraction system - 1st locating pin (right inside) - Ball tables - Good parts container for parts chute - Chip container for rear removal Extended Laser Equipment - Copper cutting package - Brass cutting package Extended Punching Equipment - MultiShear function - Multitool function - MultiBend function - Thread forming with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast embossing function - Engraving function - Deburring and roller technology function - Ejecting small parts function Parts Ejection - Integrated sorting function for parts chute • Sensor for parts chute • Tray line for 4 standard trays 300 x 400 mm • Customer-supplied trays Extended Machine Equipment - 1x additional clamp - Machine rated for ambient temperatures up to 43°C Special Sheet Metal Processing - Brush tables - Warping detection Options for Compact Dust Collector - CO2 extinguishing system for the compact dust collector Data Transmission - Wireless Operation Point Machine Accessories - 1 set RTC cassettes incl. die plate SheetMaster Compact - SheetMaster Compact 3000 x 1500 mm (AK05) • Loading station with spreader magnet for sheet separation • Suction frame • Vacuum sensor system • Double sheet detection • Unloading cart for scrap grid and microjoint sheets • 2nd operator's station for loading and unloading.

Condition: used, Mechanical cycle rate per hour: 3,000 Min. punching width: 60 mm with foot Pitch / 105 mm with microswitch Dodpfoxgry Hjx Adkjku Max. punching width: 500 mm Min. length of unpunched side: 60 mm Max. length of unpunched side: 800 mm Max. punching thickness: 4 mm (1) Punching process: Microswitch or foot switch Machine dimensions L x W x H: 670 x 450 x 400 mm Machine weight: 112 kg (2) Machine packaging dimensions L x W x H: 900 x 670 x 680 mm Machine weight with packaging: 174 kg (2) Power connection: 3/N/PE~400/230V 50Hz / 3.5kW / 3/PE~200/115V 60Hz / 3.5kW

Condition: good (used), Year of construction: 1989, Punching machine Manufacturer: Amada Model: Aries 245 Year of manufacture: 1989 CNC control: Amada 04PA Operating hours: approx. 20,000 Punching force: 200 kN Sheet thickness (stainless steel) max.: 3 mm Sheet thickness (mild steel) max.: 4 mm Sheet thickness (aluminum) max.: 3 mm Dksdpfxjrxrgdj Adksu Travel paths: 1,270 x 1,000 mm Turret: 20 stations (2x indexable B-stations) Incl. complete tool set! Power: 11 kVA Dimensions (LxWxH): 2,700 x 3,784 x 1,950 mm Weight: 7,500 kg plus 2,500 kg base plate 91025ä

Condition: used, total length: 1,900 mm, total width: 950 mm, total height: 1,800 mm, Empty weight: 2.150 kg Price: On request - Maximum capacity (⌀ x thickness): 28 mm x 20 mm - Strokes per minute (at 20 mm stroke): 38 - Working height: 890 mm - Largest hole (optional): 38 mm - Max. bar bending: 250 x 12 mm - Max. sheet bending: 500 x 3 mm - Max. angle cutting (90°): 130 x 13 mm - Max. angle cutting (45°): 70 x 10 mm Dksdpfx Ajxhcfpjdkou - Notching (material thickness): 10 mm - Documentation available: No - CE marking present: Yes - Control: Teach-in - Motor power: 7.5kW - Table width: 350mm - Throat depth: 355mm - Table length: 600mm - Ram length: 40mm - Model: Hydraulic - Max. stroke: 55mm - Power: 80.0ton - Transport dimensions: 1900mm x 950mm x 1800mm (l x w x h) - Transport weight [kg]: 2150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, sheet width - max. 200 mm plate thickness 6 mm flat steel 70 x 7 mm round bar steel 13 mm weight of the machine ca. 50 kg Djdpfxsg Sx R Re Adkeku dimensions of the machine ca. 800 x 500 x 1800 mm

Year of construction: 2000, condition: used, Muhr and Bender KLS 1100 Punching capacity 110 clay Diameter x sheet thickness Ø 40 in 22 mm throat 500 mm Dkedpolzc Dcsfx Adkou Max. hole diameter 80 mm Maximum cutout thickness 22 mm Knife length 500 mm Max material thickness by notching 16 mm Motor power 8 kW Weight 5500 kg

Condition: good (used), Year of construction: 2010, operating hours: 49,000 h, functionality: fully functional, working range: 2,500 mm, punching force: 165 t, workpiece weight (max.): 120 kg, laser power: 2,000 W, punching diameter: 76 mm, overall weight: 13,000 kg, workpiece length (max.): 2,500 mm, sheet thickness (max.): 4 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 4 mm, space requirement length: 6,800 mm, space requirement width: 6,150 mm, Equipment: cooling unit, safety light barrier, Special Equipment: + Thread forming function + Softpunch function + Height-adjustable clamping shoe + Follow-up cylinder + Vibration-damped installation + Sensor for part chute + Die spray lubrication + Loading and unloading aid with brush Standard Equipment: - Robust C-frame - Coordinate guide with integrated linear magazine - 21 stations for tools and clamping shoes - 2 clamping shoes - Drives: maintenance-free three-phase servo motors - Brush tables - Laser TCF1 (2000W) - HI-LAS high-pressure cutting - High-speed processing with SprintLas - Programmable cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Quick-change device for cutting head - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotatable tool holder Dkedow Au Eaepfx Adkou - Automatic follow-up device with hold-down - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamping shoes - Good parts container - Punch spray lubrication - 2nd lubricant container - Punch slug extraction - Chip bin - Hydraulic quick shutdown - External control panel - TFT color touch screen 15" - Interface for USB stick - 3.5" disk drive - Safety devices - RJ45 network connection - Network connectivity - Comprehensive operating manual - Remote diagnosis system

Condition: new, AUTOMATIC PUNCH AND BIND MACHINE FOR CALENDARS Dkodpoi Arm Rjfx Adkou RILECART PB-796

Year of construction: 1999, condition: ready for operation (used), General Data Machine weight 17000 kg Main Drive Number of axis 2 Max Material Thickness Steel 6 mm Stainless steel 3 mm Aluminium 6 mm Dksdpfoxf N Skex Adkju This Nisshinbo HIQ-1250 was manufactured in 1999. It is a turret punch press with a working range of 2500 x 1250 mm, handling sheet thickness up to 6 mm for steel and aluminium, and 3 mm for stainless steel. It features a pressing capacity of 22 tons and a ram stroke of 50 mm. If you are looking to get high quality punching capabilities consider the Nisshinbo HIQ-1250 machine we have for sale. Contact us for more information. Application Types Punching

Year of construction: 2004, operating hours: 26,508 h, condition: ready for operation (used), General Data Machine weight 18000 kg Tools Number of index 45 Additional Equipment Dedpfx Aew U E Rcjdkeku Sold with all tools (list of tools attached) This AMADA EM2510NT was manufactured in 2004. A robust turret punch press, it comes with a 20-ton punching power and can handle sheet sizes up to 5000 x 1270mm. It supports a maximum sheet thickness of 3.2mm and a punching diameter of 114.3mm. Includes 45 tools for diverse punching needs. Ideal for those looking to enhance their punching capabilities. Contact us for more information about this machine. Application Types Punching