Used Lm Guide for sale (10,914)

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,500 h, load capacity: 10,000 kg, lifting height: 16,200 mm, fuel type: diesel, construction height: 3,900 mm, power: 185 kW (251.53 HP), empty load weight: 39,820 kg, drive type: Diesel, construction width: 4,150 mm, Empty container reachstacker Transmission: Dana TE17300 series Condition: Ready for operation and fully functional Knjdpfxexxd Dzo Adbsd Technical condition: Very good Front tyre size: 14.00-24 Rear tyre size: 14.00-24 Central greasing system, rear view camera, air-cushioned driver's seat

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Knjdpfxoxw Rpuo Adbsd 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, total length: 1,400 mm, total width: 1,500 mm, total height: 2,200 mm, Empty weight: 500 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 60092 - Max. sheet thickness: 13mm - Top roll diameter: 320mm - Max. working width: 3000mm - Drive: raulisch - Number of rolls: 3 - Bottom roll diameter: 320mm - Control: Conventional - Motor power: 6.0kW - Transport dimensions: 1400mm x 1500mm x 2200mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Ksdpsxykl Isfx Adbsnd Lukas van Rossum

Condition: used, No. 10026 Knsdpoxph Ewofx Adbsd Cutting mill Pallmann PS 4-5 Used According to our customer, the machine is fully functional and can be inspected on site Motor power 18.5 kW Rotor diameter 400 mm Rotor width 500 mm Rotor knives 4x 2 single knives Stator knives 4x 2 single knives Maximum permissible speed of the drive shafts 640 rpm Sale on behalf of customer, ex location near 72072 Tübingen, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Hydro-pneumatic machine vice HILMA - ROEMHELD Type SMPH 125 Jaw width: 125 mm Jaw height: 45 mm Clamping force: 3 tons at 7 bar Clamping force: 2 tons at 5 bar Clamping range: 0 to 210 mm Maximum opening: 214 mm Guideway height: 67 mm - Hydro-pneumatic force amplifier Kodpfoxw Rdfsx Adbjnd - 3 clamping ranges adjustable via positioning pin from 0 to 214 mm Dimensions (L x W x H): 550 x 260 x 135 mm Net weight: 33 kg in good condition

Condition: used, functionality: fully functional, load capacity: 12,000 kg, Accessories Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Description: Length: 1450 mm Diameter: 250 mm Knsdpfx Aeu Dzg Esdbjd

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 13,600 h, load capacity: 32,000 kg, fuel type: diesel, power: 168 kW (228.42 HP), empty load weight: 8,500 kg, drive type: Diesel, construction width: 2,500 mm, Terminal tractor Transmission: Allison 3000RDS Condition: Ready for use and fully functional Technical condition: very good Front tires: size 11R22.5 Front tires: condition: 80-100% Rear tires: size 11R22.5 Rear tires: condition: 80-100% Knjdpfxjxxd Dhj Adbjd Air conditioning, air-suspended rear axle with lowering function, air-suspended driver seat, digital display, FM radio with MP3, USB, exterior mirrors, electrically adjustable and heated, fully serviced by Kalmar, exhaust muffler + SCR sensors are new

Condition: used, Year of construction: 2012, filter area: 80 m², suction capacity: 10,500 m³/h, negative pressure: 3,800 Pa, Welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter by ULMATEC. Suitable for welding, grinding, sandblasting, and all types of dry dust. Equipped with cartridge filter elements. The filter is pneumatically cleaned by compressed air pulses during operation, ensuring high device efficiency. Designed for continuous operation. Brand: ULMATEC Model: IRF 80-4-4/7.5 MD Knedpow Hrnmjfx Adbjd Year of manufacture: 2012 Fan power: 7.5 kW Maximum capacity: 10,500 m3/h Maximum vacuum: 3,800 Pa Filtration surface: 80 m2 Stock No.: 0950

Condition: used, Year of construction: 2015, operating hours: 10,918 h, lifting height: 7,450 mm, free lift: 2,600 mm, mast type: triplex, fork length: 1,200 mm, fork width: 1,300 mm, total height: 3,500 mm, total length: 2,050 mm, total width: 4,850 mm, color: other, Empty weight: 10.650 kg Lifting capacity: 7.000 kg - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: BSD7541 - Operating hours: 10918 - Lifting capacity: 7000kg - Lifting height: 7450mm - Overhead clearance: 3500mm - Free lift: 2600mm - Fork length: 1200mm - Maximum fork width: 1300mm - Minimum fork width: 400mm - Attachment: Side-shift, Vorkenspreider - Options: Camera, Joystick, Volledige cabine, Vrije-heffing, Werklampen - Mast: Triplex - Driving direction: 2 Road - Transport dimensions: 2050mm x 4850mm x 3500mm (l x w x h) - Transport weight [kg]: 10650kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom Knodsxxu Udepfx Adbod

Condition: used, Year of construction: 2010, x-travel 700 mm y-travel 420 mm z-travel 610 mm Control Heidenhain iTNC 530 spindle tunring speed 30.000 U/min tool taper HSK E50 number of tool places 28 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Kodpfx Adexgiclobsnd Technical Features & Accessories: - 4+5 axes - Clamping device, Erowa Power Chuck ITS148 - Clamping device, Erowa UPC - Blum laser - Renishaw 3D probe - Extraction system Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2013, condition: like new (used), Thermal shrink machines are devices that allow for very rapid (3–5 sec.) shrinking of bags around the packaged product by immersion in hot water. ADVANTAGES: • Attractive product appearance Kodpfsxx Tp Hjx Adbend • Process started by a button on the control panel • Digital temperature regulation • Optimal hygiene • Robust stainless steel construction • Possibility of using insulating balls to improve process efficiency • Base immersion enabled by hydraulic actuator movement TECHNICAL SPECIFICATION DT100 Machine dimensions: 880 x 1000 x 1320 mm Chamber dimensions: 600 x 800 x 220 mm Immersion depth: 220 mm Cycle time: 3–5 sec Weight: 155 kg Voltage: 400 V-3-50 Hz Power: 15.0 kW

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 25,000 kg, total length: 860 mm, construction width: 810 mm, Crane arm Condition: Ready for use and fully functional Technical condition: very good Description: In addition to this Kalmar model, we have approx. 200 heavy-duty forklift trucks, compact forklift trucks, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail on this P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Knedpfsu Dzcmox Adbod

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,028 h, load capacity: 16,000 kg, lifting height: 5,500 mm, free lift: 1,895 mm, fuel type: diesel, mast type: triplex, construction height: 3,130 mm, fork length: 2,400 mm, drive type: Diesel, Diesel Forklift Load Center: 1200 Mast Type: Triplex Technical Condition: Good Front Tires Type: Super Elastic Front Tires Condition: 80 - 100% Rear Tires Type: Super Elastic Rear Tires Condition: 60 - 80% Sideshift, Fork Positioner, Knedpfowanzvex Adbod 3rd Valve, 4th Valve, Heating, Full Cab, Air Conditioning, CE Certificate, Joystick, LED

Condition: excellent (used), functionality: fully functional, 1-spindle paper drilling machine Foellmer Adjustable stop Knedjxt T Sqspfx Adbjd Swiveling drill head 230V/50Hz

Condition: used, Year of construction: 2008, Price: On request Cutting bench, cutting shear Type: Hydraulic Manufacturer: Colmal Type: HS 40-13 Kjdpfjwng Rxjx Adbond Year: 2008 Controller: Delem DAC-350 Cutting width: 4050 mm Max. thickness: 13mm Incl. documentation and peripherals Incl. outfeed-conveyor Machine dimensions: 4800x2400x2650mm Machine weight: 15000kg - Year: 2008 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: like new (used), Year of construction: 2017, operating hours: 20 h, functionality: fully functional, machine/vehicle number: 1750851, load capacity: 100 kg, Dalmec manipulator with vacuum generator and column. Dismantled from an unused production line, in perfect condition. Tested, fully functional, practically new. Working range: 2,530 mm Vertical lift: min. 950 mm, max. 1,850 mm (lower edge of flange) Knsdoxxbczjpfx Adbsd Load capacity: max. 100 kg Manipulator weight: 450 kg + column

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 15,595 h, load capacity: 10,000 kg, lifting height: 18,800 mm, mast type: duplex, power: 185 kW (251.53 HP), Empty container handler Load center: 1220 Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Super elastic Front tires size: 14.00-24 Front tires condition: 60 - 80% Rear tires type: Super elastic Kedpfxoxv Ha To Adbsnd Rear tires size: 14.00-24 Rear tires condition: 40 - 60% electrical pre-heating for engine and driver's cabin central greasing system hydraulic center levelling of spreader +/-3° wheel nut protection on steering wheels additional working lights: 4x on cab roof, 2x on mast driver's cabin with electronic air conditioning air-suspended driver's seat with heating and seat belt rear view camera joystick control

Condition: used, functionality: fully functional, load capacity: 10,000 kg, empty load weight: 1,250 kg, Accessories Load center: 600 Mast type: None Condition: Ready for use and fully functional Technical condition: Very good Description: Length: 2800 mm Diameter: 270 mm Kjdpfeu Dzbvjx Adbend

Condition: excellent (used), Type: SAL 1000-FL PLC / V.715.362.520 For sale is a used VLM Salt Spray Corrosion Test Chamber, type SAL 1000-FL PLC, ideal for industrial corrosion tests in accordance with international standards (DIN EN ISO 9227, ASTM B117). Perfectly suited for both laboratory and production environments to test materials, coatings, and components under controlled corrosive conditions. Features: - Robust stainless steel frame construction, max. load 450 kg - Precise control and reproducible testing - Versatile applications for salt spray, condensation water, and ventilation testing Technical details: - Exterior: Stainless steel 1.4301, powder-coated (special version) - Test chamber: Stainless steel, ECTFE-coated - Max. chamber temperature: +80 °C - Temperature stability: ±0.3 °K, temporally ±0.1 °C - Process control: PLC with touchscreen, LED display - Interface: Ethernet - Water quality: demineralized, max. conductivity 20 µS/cm - Humidifier water consumption: approx. 0.5 l/h (depending on program) - Water connection pressure: 2–4 bar Knedpfsxnyqvex Adbsd - Compressed air consumption: approx. 20 m³/h - Compressed air connection: 6–8 bar - External dimensions (W x D x H): 2160 x 670 x 1090 mm incl. base cabinet: 2160 x 670 x 1890 mm - Internal chamber dimensions (W x D x H) / volume: 1400 x 605 x 920 mm / 1040 l - Max. load sample rod: 40 kg - Electrical connection: 400 V / 50 Hz / 4000 W - Weight (empty): 350 kg Condition: used Scope of delivery: (see image) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 9,672 h, load capacity: 7,000 kg, lifting height: 3,500 mm, fuel type: electric, mast type: simplex, construction height: 2,750 mm, fork carriage width: 1,500 mm, fork length: 1,600 mm, empty load weight: 10,308 kg, total length: 3,250 mm, drive type: Elektro, construction width: 1,600 mm, Electric 4-wheel forklift Load center: 600 Fork width: 150 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Front tires type: super elastic Front tires size: 355/65-15 non-marking Rear tires type: super elastic Rear tires size: 28x9-15 non-marking Battery voltage: 80V Knsdsu Dzddjpfx Adbjd Battery Ah: 980Ah Battery year of manufacture: 2022 Description: In addition to this Kalmar model, we have around 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online hire purchase & financing at favorable conditions are always possible for us. We are also happy to buy your used vehicle without you having to buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this ECF70-6C P.S.: Our forklift master workshop specializes in repairs, maintenance, overhauls and special construction for forklifts from 8 tons. We are also happy to display your vehicle for commission sale. Side shift, fork positioner, Distance between the wheels (front-rear) - 1900 mm

Condition: excellent (used), VLM Climate Corrosion Test Chamber Here we offer you a climate corrosion test chamber from the company VLM Name: Condensation test chamber (Corrosion test chamber) Manufacturer: VLM Corrosion testing technology GmbH Description: The chamber is designed for testing the corrosion resistance of metal materials and surface treatments by salt spray corrosion test (NSS) according to: DIN 50021 SS, ASTM B 117-73, ISO 9227 and other methods and condensation tests determined with a chamber volume of 400 liters. Material front door safety glass, clear shield layer on the inside Weight 140 kg External dimensions (WxDxH) 1100x670x1090 mm Internal dimensions of the test chamber (WxDxH) 800x605x920/733 mm Chamber volume 400 l Door opening (WxH) 740×600 mm Maximum sample rod load 20 kg each Operating voltage 230 Volt Frequency 50-60 Hertz Connection 1.850W Control range of the test chamber max. 55 degrees Temperature controller Microprocessor controller PID Temperature stability ± 0,2°K Resolution of LED display 0.1°C Demi-water quality. Water max. 20 µS/cm Humidifier water consumption Approx. 0.5 l/24 hr Testing Approx. 0,4 l/h Water supply pressure 3/4" 2-4 bar Compressed air consumption Approx. 16 m3/h Type: Salt chamber SAL 400 V.713.062.000 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Kedpfx Aek H Akgjdbend Further questions we can answer on the phone for you.

Condition: excellent (used), Perkin Elmer PerkinElmer Lambda 950 UV/Vis/NIR Spectrometer – High-Precision Laboratory Instrument For sale is a PerkinElmer Lambda 950 UV/Vis/NIR spectrometer, a top-of-the-line model for demanding measurements in the ultraviolet, visible, and near-infrared range. This device is ideally suited for material analysis, optical coatings, reflection and transmission measurements, as well as numerous other applications in research and industry. Special features: Thanks to its modular design, the instrument can be optimally adapted to specific measurement tasks – ideal for research institutions, universities, and high-tech industries. Technical highlights: - Wavelength range: 175 – 3300 nm - Resolution: up to ≤ 0.05 nm (UV/Vis), ≤ 0.20 nm (NIR) - Light sources: Deuterium and tungsten-halogen lamp - Detectors: Photomultiplier (UV/Vis), PbS detector (NIR, Peltier-cooled) - Extremely low stray light: ≤ 0.00007 %T at 220 nm - Modular expandability (integrating sphere, URA, large sample chambers, and much more) Technical specifications: - Dimensions (W × D × H): 1,020 mm × 740 mm × 300 mm - Sample compartment (Primary): 200 mm × 300 mm × 220 mm (W × D × H) - Sample compartment (Secondary): 480 mm × 300 mm × 220 mm (W × D × H) - Weight: approx. 77 kg Knedow T Sm Ujpfx Adbsd Condition: used Scope of delivery: (see picture) - PerkinElmer Lambda 950 spectrometer - Standard accessories (sample holders, cables) - Operating software & manual (Subject to changes and errors in the technical data. All information without guarantee!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Perkin Elmer Type: Optima 7300 V Spectrometer Perkin Elmer ICP-OES Optima 7300V with cooler and S10 autosampler The optical system of the Optima 7300 V enables simultaneous measurement and coverage of the entire wavelength range (UV and visible). More than 73 elements can be measured in seconds to achieve exceptional sample throughput, and all raw spectral data is stored with full reprocessing capabilities. This allows sample results to be evaluated under different processing conditions, reducing the need for re-sampling and saving time and money. The Optima 7300 V was specifically developed for the special challenges of oil sample analysis and the analysis of special metals in laboratories and offers the following features: Classic vertical burner configuration with radial view Problem-free sample feed system Proven high-performance optical system Robust solid-state generator Two models available: oil version for oil analysis and HF version for geochemical and high-solid analysis Technical data: Ultraviolet wavelength range from 165 to 403 nm and for the VIS detector in the visible spectrum 404 to 782 nm Measurement of the spectral background possible during the analyte line Solid state 40 MHz signal generator Dimensions 150 x 76 x 89 cm (W x H x D) Power supply 200-240 V, 20 A line, single-phase, 50/60 Hz Maximum power 2800 VA Connection current 15 A Circulation cooler PolyScience Recirculator N0772025 Ksdpfx Adov Hzpujbond Mains connection 200-240 V 50Hz Weight: 200 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-water cooler, replaceable Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with implant steel! Laser hours: 4954 Condition: used Ksdou Ebt Ujpfx Adbsnd Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), SLM Solutions Type: SLM 125 Water-air cooler Build space (L x W x H): 125 x 125 x 125 mm (minus substrate plate height) Build space reduction (L x W x H): 50 x 50 x 50 mm (minus substrate plate height) 3D optics configuration: Single (1x 400 W) IPG fiber laser Knjdpeu Ebufofx Adbod Build rate: up to 25 cm³/h Variable layer thickness: 20 µm - 75 µm, 1 µm steps Min. structure size 140 µm Focus diameter 70 µm - 100 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 0.6 l/min (argon) Average protective gas consumption in the flooding process: 70 l/min (argon) Electrical connection / Power consumption: 400 Volt 3NPE, 32 A, 50/60 Hz, 3 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Machine dimensions (L x W x H): 1400 mm x 900 mm x 2460 mm Machine weight (without / including powder): 700 kg, 750 kg with Pu Was operated with molybdenum! Laser hours: 2383 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We are happy to answer any further questions you may have over the phone.