Used Log Bandsaw for sale (2,383)

Condition: good (used), Koenig Rex Futura II roll plant. In very good ex bakery condition. Photos show machinery whilst in storage and before cleaning. Better photos will follow. Bljdevth Auopfx Abtel

Condition: new, Year of construction: 2026, operating hours: 10 h, machine/vehicle number: Parmel_06202P&C, type of input current: three-phase, total width: 2,200 mm, input voltage: 400 V, working width: 1,600 mm, YORK Single-Sheet Cradle / Feeder Bljdpfx Absyh R Htotsl The YORK single-sheet cradle features a top-twist material feeding system that allows the material to enter the automatic cutter directly, ensuring a continuous and efficient production flow. Precision and Technology The YORK single-sheet cradle/ feeder is equipped with a full-color multilingual touchscreen control panel and dedicated control software for accurate and intuitive operation. The system can be electronically synchronized with virtually any automatic cutting machine, providing precise feeding control, reliable performance, and seamless integration into automated production lines.

Condition: used, empty load weight: 5,100 kg, maximum load weight: 32,900 kg, overall weight: 38,000 kg, axle configuration: > 3 axles, first registration: 08/2018, suspension: air, tire size: 385/55 22,5, tire condition: 60 %, color: other, Year of construction: 2018, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69805 Fliegl, SDS01 * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Air line coupling head (red + yellow) * 15-pin connector plug * Raise and lower device * Suspension: Air * Gross weight: 38,000 kg * Unladen weight: 5,100 kg * Payload: 32,900 kg * Permissible gross weight: 38,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 70% -- 70% - Tire size: 385/55 R22.5 * Tire condition, 2nd axle: 50% -- 50% - Tire size: 385/55 R22.5 * Tire condition, 3rd axle: 50% -- 50% - Tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 * Fliegl container chassis * 40" container platform for timber & metal, manufacturer: S Grabmeier * Unladen weight: 4,600 kg, front wall height: 2,040 mm * 6 pairs of lashing rings for rail transport * Frame height: 500 mm, timber body with 8 pairs of Ecco Steel stanchions on container chassis * Stanchion height: 1,980 mm * Highlight: Lift axle / timber transport / SAF axles Disclaimer: Bodpfxjyib Ido Abtsll Subject to change, prior sale, and errors excepted. You can find further photos and videos on our website. Our comprehensive service portfolio includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing solutions * Application for all (export) documentation * Ordering of export/temporary customs license plates * Vehicle preparation: new tarpaulins, lettering, repainting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialist staff—we will be happy to advise you.

Condition: used, first registration: 01/2018, fuel type: diesel, brakes: other, color: red, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, Equipment: crane, Kesla 2124L Crane Year of manufacture: 2018 High seat operation Including timber grab 2-point support Bodpfx Aoxrdcqjbtjll 4.00 m / 6,050 kg 7.00 m / 3,500 kg Export / net price: €9,900 All information provided without guarantee, subject to errors.

Condition: used, Year of construction: 1989, functionality: unexamined, 23 pcs DIALOG11 cards Types and quantity for each type: NGE01 - 2 pcs NPE01 - 4 pcs Bodpfx Ajwyudqobtjll NPC01 - 1 pcs NPA01 - 4 pcs NZP02 - 4 pcs NRP02 - 1 pcs NSP02 - 1 pcs NSI02 - 2 pcs NPP04 - 2 pcs NSV02 - 2 pcs

Condition: used, empty load weight: 6,150 kg, maximum load weight: 32,850 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2021, loading space length: 13,000 mm, loading space width: 2,330 mm, loading space height: 1 mm, suspension: air, tire size: 385/65R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden. 3 axles, SAF axles, air suspension, liftable first axle, raise/lower function, ABS (anti-lock braking system), underrun protection, side aluminum underrun protection, support legs, storage box, stakes. Bljdpjv Igvvofx Abtsl Superstructure: 3-axle timber transport semi-trailer with 8 Ecco Steel stanchion bolsters, AS NEW! 3x 9t SAF axles, disc brakes, first axle liftable, replaceable 2" kingpin, chassis height unladen approx. 1150mm, minimum front clearance from kingpin center approx. 2240mm, lightweight frame made of high-strength fine-grain steel. Loading height approx. 1540mm! Available upon request also as model year 2022 for an extra charge of 1,000 EUR! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: new, Year of construction: 2026, input voltage: 230 V, input current: 5 A, input frequency: 50 Hz, cutting height (max.): 305 mm, control type: manual, actuation type: manual, rotational speed (max.): 1,420 rpm, rotational speed (min.): 1,420 rpm, overall weight: 19 kg, torque: 5 Nm, cable length: 4,000 mm, saw band length: 1,710 mm, mobility: mobile, Equipment: CE marking, documentation/manual, motor brake, PBS300 TITAN – 300 mm Cutting Capacity The PBS300 TITAN is a professional portable bandsaw designed for processing large structural timber sections up to 300 mm. The machine combines high cutting capacity with a compact and lightweight construction, making it suitable for carpenters, timber frame builders and woodworking companies that require a mobile solution for cutting large wooden elements. Despite its compact size, the PBS300 TITAN provides stable cutting performance in thick structural timber. Well-adjusted machines can cut timber sections up to maximum thickness without noticeable blade drift. The design focuses on rigid blade guidance, efficient manufacturability and practical usability in professional environments. Key Features • Maximum cutting height: 300 mm • Designed for structural timber processing • Hybrid blade guide system (steel guides + bearings) • Precision-machined aluminum band wheels • Compact and portable design – 19 kg machine weight • Robust welded aluminum frame construction • Developed specifically for professional users Typical applications: • timber frame construction • carpentry workshops • log house building • structural timber processing Technical Specifications Cutting height: 300 mm Band wheel diameter: 203 mm Blade length: 1710 mm Blade width: 6–13 mm Guide table size: 420 × 310 mm Motor: asynchronous electric motor Power: 0.75 kW Speed: 1420 RPM Power supply: 230 V (single-phase) Protection class: IP54 Connection cable length: 4 m Machine weight: 19 kg Manufacturer Bjdpfx Ajv Tcuxsbtjll Astra Pro Sp. z o.o. We manufacture machines for other companies as an OEM supplier. The PBS300 TITAN is our own model developed based on years of manufacturing experience in this niche market. More Information If you are interested in the machine, please contact us for technical details, pricing and delivery information.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 113 kg, total width: 840 mm, total length: 1,620 mm, total height: 920 mm, fuel: super 95, fuel tank capacity: 3 l, Equipment: trailer coupling, The HS12288 log splitter from HZC Power impresses with a splitting force of 12 tons and a maximum splitting length of 530 mm. The 6.5 hp petrol engine ensures sufficient power and efficient work, while the splitting cycle of just 11 seconds guarantees fast wood processing. The device works in a horizontal position and is equipped with a fixed splitting wedge/splitting cross, which presses the wood against the wedge via the cylinder. The two-handed operation ensures additional safety. The log splitter is easy to transport thanks to the trailer coupling. General data: Manufacturer: HZC Power Model: HS12288 Splitting force: 12 t Maximum splitting length: 530 mm Splitting cycle: 11 s Oil pressure: 270 bar Hydraulic oil capacity: 10 l (HLP46) Product weight: 113 kg Shipping weight: 140 kg Dimensions assembled (LxWxH): 162 cm x 84 cm x 92 cm Dimensions with packaging (LxWxH): 110 cm x 54 cm x 80 cm Special features: Splitting wedge: 15 cm x 20 cm (LxW) Trailer coupling: For easy transportation Working position: Horizontal Operation: 2-hand safety control Splitting wedge/splitting cross: Permanently mounted, wood is pressed against the splitting wedge via the cylinder Motor: Manufacturer: Jiao Model: 6.5 HP / 208 cc Engine technology: Single-cylinder, 4-stroke, air-cooled, OHV (overhead valves) Displacement: 208 cc Cylinder: Cylinder with cast iron sleeve Bore: 68.3 mm Stroke: 55.9 mm Fuel tank capacity: 3.1 l Oil capacity: 0.6 l Engine weight: 16 kg Dimensions (WxLxH): 321 x 376 x 346 mm These details summarize the most important technical specifications and equipment features of the HS12288 log splitter from HZC Power. Splitting force: 12 t - For effortless splitting of wood up to 530 mm in length and a maximum diameter of 50 cm. Cable starter: Easy engine start, even in cold temperatures. Splitting wedge/splitting cross: Permanently mounted, ensures effective splitting without constant readjustment. Hydraulic system: Powerful system with 270 bar oil pressure, ensures high efficiency and durability. Working position: Horizontal - allows you to work comfortably while lying down. Two-hand operation: For maximum safety when operating the log splitter. Oil filter: Integrated oil filter for a longer service life of the appliance. Bodpowalutofx Abtoll Trailer coupling: For easy transportation on private land, but without road approval. Robust frame: Sturdy frame ensures that the split material is held securely during the splitting process. Compact dimensions: With a width of 84 cm, the splitter can be easily transported on a trailer. Engine: 6.5 hp petrol engine with 208 cc displacement for powerful splitting. Integrated table surface: Provides additional space for storing pieces of wood while working.

Condition: excellent (used), Splitting - Grooving Machine (used to groove and/or split in two parts one unique panel) - Minimum length of the workpiece: mm 250 (ca.) - Maximum length of the workpiece: mm 2700 (ca.) - Minimum width of the workpiece: mm 124 (ca.) - Maximum width of the workpiece: mm 1200 (ca.) Bsdpfx Abeyx S N Uetjll - Thickness (min./max) of the workpiece: mm 10 / 60 (ca.) - Max feeding speed: m/min 50 (ca.) - Total installed power Kw 82 Along with the following groups: POS. 1 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 2 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 3 Lower scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 4 Upper scoring blade unit (Rotax electro-spindle Kw 5) max. blade diameter mm 250 (ca.) POS. 5 Lower main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) POS. 6 Upper main blade (sawing) unit (Rotax electro-spindle Kw 11) max. diameter mm 450 (ca.) OPTIONAL: soundproof and safety enclosure (cabine)

Condition: used, mileage: 1,38,740 km, power: 375 kW (509.86 HP), first registration: 02/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Tacho 4.1 retrofitted, Safety Package Light and Visibility Plus, Advanced Safety Package, Driver Assistance Package, Trailer Package, EBS, Retarder Eco Cool, Steering Brake, Easy Start, LED lighting, electric glass sunroof, preparation for rear-view camera, 2kg fire extinguisher, ASR, Ringfeder tow hitch, MAN Media System Navi Professional 12.3'' with navigation maps for Europe and Russia, Advanced sound system with subwoofer, RIO Box, Online Traffic for navigation, DOLL Mammut bolster and bolsters M 12Z - EPSILON loading crane with 8.30m reach, max. stabilizer width 3.90m, fixed stabilizer plates, 4 LED floodlights on the crane, 4+2 controls, 4 mechanical levers, 2 mechanical pedals. Bodpfx Aoy Hd U Sjbtsll

Condition: good (used), Year of construction: 2004, Bandsaw in good condition + 2 extra new bandsaw blades. Blodpfx Absy Txb Tetsl

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, input voltage: 230 V, measuring range X-axis: 200 mm, measuring range Y-axis: 85 mm, measuring range Z-axis: 50 mm, total width: 483 mm, total length: 598 mm, total height: 464 mm, overall weight: 64 kg, input current: 5 A, repeat accuracy: 0.005 mm, input frequency: 50 Hz, Equipment: CE marking, USB port, documentation/manual, type plate available, PG1000-400 – Optical system for inspecting the geometry of rotating cutting tools PG1000-400 is a professional optical measuring and inspection system for quickly checking the geometry of cutting tools. It is designed for tool manufacturers, sharpening shops, grinding shops, tool rooms, CNC machining centers, and quality control/metrology departments. Its main application is the inspection of rotating cutting tools after manufacturing, grinding, sharpening, or reconditioning. The system is suitable for HSS and solid carbide tools, especially drills, end mills, step drills, reamers, taps, form tools, micro tools, and custom-made tools. The device can also be used to inspect carbide inserts, selected thread geometries, screws/bolts, and other precision parts, provided that the geometry being inspected is optically accessible to the camera. The system's primary focus is on the inspection of cutting tool geometry. Typical applications: - In-process inspection directly at the grinding machine or in production - Incoming and outgoing inspection of tools - Inspection after sharpening/regrinding - Quality documentation and measurement reports - Repeated inspection of serially produced tools PG1000-400 allows for the inspection of, for example: - Rake angle and clearance angle - Helix angle - Point angle for drills - Radii and corner radii Bsdjzdz S Topfx Abtell - Diameters and distances - Cutting edge length - Land width, margin width, facets - Web thickness - Tool profile - Runout - Condition and wear of the cutting edge - Comparison of geometry with DXF/DWG drawings The system operates optically and non-contact. This is advantageous when inspecting sharp edges, fine microgeometries, coated tools, and precise edges, where speed, repeatability, and minimizing operator influence are important. The system includes REACTION software, developed specifically for the inspection of cutting tools. The software offers more than 50 measuring functions, edge detection, automatic alignment of measuring points to the edge, saving inspection scenes, comparison with DXF/DWG geometry, PDF reports with PASS/FAIL evaluation, and data export to Excel/CSV. Technical specifications: - Recommended tool diameter: 0.635–75 mm - Tool measuring length: approx. 190–200 mm - Magnification range: 12.5× to 145× - Camera: 5 MP - Monitor: 27" 4K Ultra HD - Measuring range: 85 mm vertically × 200 mm horizontally - Accuracy/repeatability: ±5 µm at maximum magnification - Device dimensions: approx. 598 × 483 × 464 mm - Weight: approx. 64 kg Offered configuration: - PG1000-400 optical cutting tool inspection system - M / F / A encoders - PC with REACTION software - 27" 4K Ultra HD monitor - Flexible LED lighting with diffuser - Curved magnetic diffusion plate - Rotating base block for clamping fixtures - 1000-026-5"-ASS – 5" V-block assembly with insert, top clamp, and stop - Basic remote operator training About the manufacturer: PG1000 is based on the long-term development of systems for inspecting cutting tools. The first generation of PG1000 was introduced in 1993. The system is manufactured in the USA by PG Inspection Technologies LLC, which specializes in this product line. Since 1996, more than 1000 PG1000 systems have been delivered. Condition and delivery: - New machine - Year of manufacture: 2026 - Warranty: 12 months - Location: Czech Republic / EU - Delivery, assistance with commissioning, and training according to agreement - CE marking and relevant EU documentation The device i

Condition: used, mileage: 8,47,500 km, power: 552 kW (750.51 HP), first registration: 12/2015, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, crane, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, spoiler, = Additional options and accessories = - Air horn - Air suspension - Alloy wheels - High Beams - Immobilizer - I shift - PTO - Radio CD player - Refridgerator - Roof Spoiler - Sleeping cabin - Speed limiter - Sper - Toolbox Bodpfezbmqwex Abtjll = Remarks = Volvo FH750, 29-12-2015, 847500 km, Euro 6, 6x4, I-Shift, Dynamic steering, Loglift loading crane (2007) = More information = Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels GVW: 29.000 kg Crane: year of manufacture 2007 Extendable superstructure: Yes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, Year of construction: 1993, operating hours: 47,000 h, functionality: fully functional, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, We offer this used Baljer & Zembrod machine for log yards, year of manufacture 1993. Track width: 3m Bsdpfjyz Twrox Abtell Crane type: OBX II Lifting capacity without grapple: 1900kg/15.2m Grapple: without Crane position: Rear of cab Cab side: Left Saw: 1.3m Alpha With HEB500 running rail Cutting bench with waste scraper chain If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2006, cutting diameter 440 mm saw band length 5200 x 1,1 x 34 mm cutting width 610 x 440 mm Bodpsy Aa H Ajfx Abtsll total power requirement 3,7 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 2,7 x 1,55 x 1,5 m Band saw horizontal - Coolant system - Emergency stop switch

Condition: used, Year of construction: 1992, throat 1800 mm workpiece height 750 mm Travel 4000 mm table width 5500 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Bedpfxjytx Nvs Abtoll About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 325, overall weight: 350 kg, fuel type: electric, color: white, total length: 4,000 mm, total width: 1,000 mm, total height: 1,550 mm, PSA HSA2500 semi-automatic sleeve cutting system for cardboard sleeves Features: Manual sleeve loading Automatic clamping Automatic feed Automatic length measurement Automatic cutting process PLC control with display Storage of up to 50 different sleeve lengths and 3 quantity settings Bodpfx Aoy Nyb Tjbtell Suitable for: Paper sleeves and plastic sleeves with a diameter of 50 to 200 mm Maximum sleeve length: 2500 mm The system is equipped with a 76 mm spindle.

Condition: used, functionality: unexamined, The shuttle warehouse features multiple storage levels, allowing for fully automated storage and management of pallets. The pallets are transported into the warehouse via the existing conveyor system and assigned to their respective storage locations by the shuttle system. The multi-level design ensures optimal utilization of the available storage space. The system enables rapid and automated retrieval of pallets for dispatch, which streamlines logistics processes and reduces waiting times. The system is particularly suitable as a buffer warehouse between production, palletizing, and loading, ensuring a continuous flow of materials. Scope: • Fully automated shuttle warehouse • Multiple storage levels for Euro pallets • Infeed and outfeed technology • Associated conveyor technology Bledpfxezvc S Eo Abtol • Control and system technology (where applicable) Functionality unverified, but was in use until recently. ATTENTION: Mobile, small peripheral equipment is not included in this item. Please contact us if you have any uncertainties regarding the scope before placing a bid. We strongly recommend inspecting the item! If interested, please contact us by email!

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Universal milling machine, 3-axis machining: > Working area X = 805 mm > Working area Y = 1,015 mm > Working area Z = 220 mm > Small footprint: 1,800 x 1,500 x 1,980 mm > Spindle: 4.8 kW | max. 40,000 rpm | HSK > Tool magazine: 15 positions > Aluminum vacuum table > 3D probe > Minimum quantity lubrication Bledpfeztxmgox Abtol > Tool measuring system > Further optional equipment ...

Year of construction: 2018, operating hours: 10 h, condition: good (used), functionality: fully functional, Subject: RZ125-315 pump with diffuser, impeller for water with blades Blsdpeztxvnofx Abtjl - Pump operating parameters: Q = 80-150 m³/h H = 14.7-12.5 m - Material: cast iron, grade ŻL250 - Sealing: rope seal - With 3SIE160L-6 motor, 11 kW, 960 rpm, 400V 2. Quantity: 2 pcs.

Condition: new, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, warranty duration: 12 months, product height (max.): 800 mm, input frequency: 50 Hz, workpiece weight (max.): 40 kg, Equipment: documentation/manual, type plate available, SITEC TO800CAB1T automatic system for circumferential MIG welding with a single torch, featuring numerical control with an integrated PLC, a 7" color touchscreen, program management and storage, and provision for remote assistance and network connection. Key features: Bodpfxjzry Tfe Abtoll Maximum workpiece diameter: Ø 400 mm Maximum length: 800 mm Workable thickness: 2.5 mm Material: Steel (Fe) Maximum load capacity: 40 kg Welding process: MIG Motorized rotating head with variable speed, 0.3–3 rpm Rotating table, Ø 400 mm Tailstock with 150 kg thrust Automatic pneumatic lifting system 1 torch adjustment slide 1 pneumatic torch positioning system 2 rotating clamps, 500 A Fully enclosed protection cabin with internal lighting and fume extraction Complies with CE regulations Machine designed to ensure high precision, repeatability, and productivity in the circumferential welding of cylindrical parts. Ideal for industrial production and series processing. Condition: New – available for inspection and testing by appointment. Contact us for further information, photos, and pricing.

Condition: used, Year of construction: 1993, Machine: Cames Macchine Enologiche P.Y-15-93 Champagne cork orientator Bodjzx Dtpopfx Abtjll

Year of construction: 2026, operating hours: 20 h, condition: like new (used), functionality: fully functional, PE30 Commercial Chocolate Enrobing & Cooling Line – 30kg Tank – 2.7m Cooling Tunnel – Almost New We are selling our complete PE30 chocolate enrobing and cooling line following the closure of our recently launched protein bar production facility in London. The equipment was purchased new specifically for our own production and only went into operation around March 2026. Since then, approximately 25,000 chocolate-coated protein bars have passed through the line, so it has had relatively light commercial use and remains in excellent condition. Blsdpfjzx D Dbox Abtel The equipment is being sold solely due to the closure of our production facility for business and financial reasons – not because of any fault with the machinery. Complete system includes: PE30 chocolate melting & enrobing machine 30kg chocolate melting/holding tank Chocolate enrobing section with stainless-steel mesh conveyor Custom-made acrylic enclosure/cover for improved temperature stability around the chocolate 2.7m refrigerated cooling tunnel Food-grade PU cooling conveyor Copeland compressor External ventilation/extraction fan Associated components supplied with the system The custom acrylic cover was purchased separately and designed specifically for our machine to help maintain a more controlled temperature around the chocolate during enrobing. It is included in the sale. PE30 specifications Manufacturer: Anhui Dixin Machinery Technology Co., Ltd. Model: PE30 Capacity: 30kg Power: 220V / 1 Phase / 50Hz, 1.8kW Material: SUS304 stainless steel Working speed: 2m/min Mesh: 200 × 1000mm Belt: 200 × 1200mm Dimensions: approx. 1230 × 850 × 1450mm 2.7m cooling tunnel SUS304 stainless steel Food-grade PU belt 200mm × 2700mm belt 220V / 1 Phase / 50Hz 2.8kW Copeland 2HP compressor Temperature capability down to approx. -15°C Dimensions: approx. 2800 × 850 × 1380mm Weight: approx. 220kg These technical specifications are taken from the original manufacturer's documentation. The system also includes a ventilation fan intended to be installed/vented outside the production area. We used the line for premium chocolate-coated protein bars, but it can also be suitable for energy/nutrition bars, confectionery, biscuits, bakery products and other chocolate-coated products. The manufacturer also specifies the cooling tunnel for a range of food applications. The machine is currently located in Wimbledon, London, UK. Inspection can be arranged, and videos of the equipment operating can be provided to serious buyers. We are also selling other equipment from our protein bar production facility, including protein bar extrusion/forming machinery, chocolate processing equipment, flow-wrapping machines, mixers and stainless-steel production equipment. Machines can be purchased individually or as part of a complete protein/energy bar production line. Collection from Wimbledon, London. Buyer to arrange suitable transport and installation unless otherwise agreed.

Condition: ready for operation (used), Year of construction: 2007, total height: 2,450 mm, travel distance X-axis: 3,090 mm, travel distance Y-axis: 1,540 mm, overall weight: 8,400 kg, table width: 3,000 mm, table length: 1,500 mm, controller manufacturer: FANUC, controller model: FANUC 16I-PB, This TECHNOLOGY Tecnotransfer 1500x3000 was manufactured in 2007. A robust CNC punching machine, it offers precision and efficiency for your metalworking needs. If you are looking to get high-quality punching capabilities, consider the TECHNOLOGY Tecnotransfer 1500x3000 machine we have for sale. Contact us for more information. Additional equipment • Integrated Auto-Index system • Automatic tool change system with 15 stations • Waste extraction system at the die • Pedal for opening/closing sheet clamps • Pedal for single punching operation • Automatic collision prevention for tilting parts and cutouts • Interactive CAD with export function • Import of CAD drawings in common formats • Interactive nesting (freehand, bump nesting) • Automatic positioning of special tools Machine Benefits Qualitative Machine Benefits • Maximum punching diameter with technology tools: 100 mm • Maximum punching diameter with trumpf tools: 80 mm • Maximum punching and nibbling thickness: 6 mm • Automatic tool sharpening recovery: 10 mm • Tool change time: 4 seconds • Automatic sheet metal processing, including residual grid destruction Technical Machine Benefits • Workpiece repositioning: automatic • C-frame structure: c-frame (schwanenhals) • Operating manuals included • Technical support available • Processable sheets with automatic repositioning: 1500 x 6000 mm • Steel and ball plates for sheet metal support • Front horizontal plane for sheet metal unloading • Number of stored stations: 15 • Number of rotating stations: 15 Extra Information Machine still under power Dimensions Bjdjzn Hk Nepfx Abtjll Machine Depth 6190 mm

Condition: ready for operation (used), An Alpha viscometer for testing raw elastomers and rubber compounds is available. Test standards: ASTM D1646/D3346, max. temperature: 200°C, rotational speed: 2rpm. Machine dimensions X/Y/Z: approx. 800mm/700mm/1350mm, weight: approx. 200kg. Without software. Documentation available. An on-site inspection is possible. Blodpsxrukrefx Abtjl