Used Log Conveyer for sale (4,526)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3 kg, maximum load weight: 8 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, The images shown are archive photos. Further Information Chassis Center Axle Trailer Fine-grain steel welded construction Outer frame slightly slanted with Load-Lock profile for lashing strap attachment. Note: To attach the straps in combination with side walls, the side walls must be opened! Gear support leg at the front Folding rear support 2 wheel chocks with holders Steel underrun protection, galvanized Quarter shell mudguards 1 plastic toolbox with shelf, dimensions: w=620/h=360/d=440 mm, lockable with a padlock (padlock not included) Laodpfx Acji Ri H Dokeb 1 open storage compartment for insert stakes, located under the loading area 4 pairs of stake pockets integrated into the outer frame, 83 x 83 mm internal dimensions 4 stake pockets centered in the floor with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of insertable stakes, B=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stake pockets/insert stakes are not designed for securing long loads, pipes, etc. by themselves without additional lashing Tandem trailer coupling Drawbar with certified 40 mm towing eye Drawbar mechanically adjustable in length 4 x 500 mm, from 1800 to 3800 mm, set to 1800 mm (Note: Observe load distribution and drawbar load) Axles & Suspension GFA axles with tapered roller bearings and S-cam brakes Laser-measured axles/running gear to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker balance) Wheels and Tires 235/75 R 17.5 Manufacturer’s choice Steel rims, factory silver Brake System 2-line air brake system Spring-loaded parking brake Integral air tanks 2 non-interchangeable trailer couplings at the front with connecting lines to the truck ABS and ALB, with ABS plug at the front with connecting cable Caution: This trailer may only be towed by vehicles that ensure the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red outline marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front with connecting cable Floor About 30 mm thick phenolic plywood, designed for high point loads Note: Warping of the floor possible due to weather conditions! Platform length approx. 6,200 mm Operating Notes The specified gross weight is technically feasible; depending on the type of cargo, the gross weight may not be achievable in compliance with permissible axle, support, and saddle loads. Approval / Plates Country of registration: Germany With Dekra inspection and report 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides, red at rear Paintwork Frame color: DB 7350 Nova Grey Attention: Archive photos!

Condition: used, empty load weight: 4,200 kg, maximum load weight: 13,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2006, front tire size: 275/70R22,5, rear tire size: 275/70R22,5, Equipment: ABS, | Ressenig timber trailer | Year: 2006 | BPW axles with drum brakes | 2 pairs of stanchions | 275/70R22.5 twin tires | 50mm towing eye | Unladen weight: 5,300 kg | Payload: 13,800 kg | Gross weight: 18,000 kg | 6 meter timber | Austrian vehicle | Air suspension | Subject to errors, changes, and prior sale. Ledpforg H Ausx Acksab

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 12-25, A fully automatic cutting machine for Tissue paper rolls. High precision servo control system - "Control Techniques" Cutting large rolls Diam. up to 280mm - in single channel. Cutting rolls in two channels - up to max. Dia. of 140mm Automatic lubricant spraying system and air cooling for the blade. The machine complies with CE Safety standards. Lasdoup U Raopfx Ackob Specifications: - Product cutting dia.(Max)– 280 mm - Cutting speed Max – 160 cuts/min (x 2 lines = 320 Toilet rolls/min) - Computerized controlled functions: * Product and trim length * Cutting speed * Sharpening frequency and advance * Blade lubrication frequency * Fault display * Counter (coded) * Inlet conveyor and hoper transferring logs automatically from the ewinder into the cutting channel. * Choice of program according to the various products. - Clamps – machine is supplied together with 4 rigid pneumatically operated clamps, according to customers products dia. - Blade dia. – 600 - 800 mm - Electric supply – 12 kw x 380 v - Air pressure – 1/4 hose 6 atm - Dimensions – 6.5 x 2,2 x 2.4 m - Weight – 3500 kg

Condition: used, empty load weight: 5,100 kg, maximum load weight: 32,900 kg, overall weight: 38,000 kg, axle configuration: > 3 axles, first registration: 08/2018, suspension: air, tire size: 385/55 22,5, tire condition: 50 %, color: other, Year of construction: 2018, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69803 Fliegl, SDS01 * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle Ljdpfsyib Iqex Acksab * Air connection couplings (red and yellow) * 15-pin connector plug * Lifting and lowering mechanism * Suspension: Air * Total weight: 38,000 kg * Unladen weight: 5,100 kg * Payload: 32,900 kg * Permissible total weight: 38,000 kg * Axle manufacturer: SAF * Tyre condition 1st axle: 70% – 70% – Tyre size: 385/55 R22.5 * Tyre condition 2nd axle: 30% – 30% – Tyre size: 385/55 R22.5 * Tyre condition 3rd axle: 50% – 50% – Tyre size: 385/55 R22.5 * Tyre sizes: 385/55 R22.5 * Fliegl container chassis * 40" container platform for timber and metal, manufacturer: S Grabmeier * Unladen weight: 4,600 kg, front wall height: 2,040 mm * 6 pairs of lashing rings for rail transport * Frame height: 500 mm, wooden superstructure with 8 pairs of Ecco Steel stanchions on container chassis * Stanchion height: 1,980 mm * Special features: Lift axle / timber transport / SAF axle Disclaimer: Subject to change, prior sale and errors excepted. More photos and videos can be found on our website. Our comprehensive services include for example: * Purchase / sale / rental of commercial vehicles * Fast, easy financing options * Processing of all (export) documents * Ordering of export plates / customs plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading / cargo securing * TÜV inspections, registration services * Transfer of commercial vehicles Ask our trained staff, we are happy to advise you.

Condition: used, empty load weight: 5,100 kg, maximum load weight: 32,900 kg, overall weight: 38,000 kg, axle configuration: > 3 axles, first registration: 08/2018, suspension: air, tire size: 385/55 22,5, tire condition: 60 %, color: other, Year of construction: 2018, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69805 Fliegl, SDS01 * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Air line coupling head (red + yellow) * 15-pin connector plug * Raise and lower device * Suspension: Air * Gross weight: 38,000 kg * Unladen weight: 5,100 kg * Payload: 32,900 kg * Permissible gross weight: 38,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 70% -- 70% - Tire size: 385/55 R22.5 * Tire condition, 2nd axle: 50% -- 50% - Tire size: 385/55 R22.5 * Tire condition, 3rd axle: 50% -- 50% - Tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 * Fliegl container chassis * 40" container platform for timber & metal, manufacturer: S Grabmeier * Unladen weight: 4,600 kg, front wall height: 2,040 mm * 6 pairs of lashing rings for rail transport * Frame height: 500 mm, timber body with 8 pairs of Ecco Steel stanchions on container chassis * Stanchion height: 1,980 mm * Highlight: Lift axle / timber transport / SAF axles Disclaimer: Subject to change, prior sale, and errors excepted. You can find further photos and videos on our website. Our comprehensive service portfolio includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing solutions Lasdpfeyib Idox Ackob * Application for all (export) documentation * Ordering of export/temporary customs license plates * Vehicle preparation: new tarpaulins, lettering, repainting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained specialist staff—we will be happy to advise you.

Condition: used, empty load weight: 5,100 kg, maximum load weight: 32,900 kg, overall weight: 38,000 kg, axle configuration: > 3 axles, first registration: 08/2018, suspension: air, tire size: 385/55 22,5, tire condition: 60 %, color: other, Year of construction: 2018, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69804 Fliegl, SDS01 * Year of manufacture: 2018 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Air connection coupling head (red + yellow) * 15-pin connector plug * Lifting and lowering device * Suspension: Air * Gross weight: 38,000 kg * Unladen weight: 5,100 kg * Payload: 32,900 kg * Permissible total weight: 38,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 70% -- 70% - Tire size: 385/55 R22.5 * Tire condition, 2nd axle: 50% -- 50% - Tire size: 385/55 R22.5 * Tire condition, 3rd axle: 50% -- 50% - Tire size: 385/55 R22.5 * Tire sizes: 385/55 R22.5 * Fliegl container chassis * 40" container platform for wood & metal * Manufacturer: S Grabmeier * Unladen weight: 4,600 kg * Front wall height: 2,040 mm * 6 pairs of lashing rings for rail transport * Frame height: 500 mm * Timber body with 8 pairs of Ecco Steel stanchions on container chassis * Stanchion height: 1,980 mm * Highlights: Lift axle / Timber transport / SAF axle Disclaimer: Subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing Ljdsyib H Topfx Ackeab * Processing of all (export) documents * Ordering of export license plates / customs plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Vehicle transfer of commercial vehicles Please contact our trained staff – we will be happy to advise you.

Condition: used, empty load weight: 6,200 kg, maximum load weight: 35,800 kg, overall weight: 42,000 kg, axle configuration: > 3 axles, first registration: 02/2021, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: brown, Year of construction: 2021, operating hours: 2,80,039 h, mileage: 2,80,039 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 69702 Doll, H3L-14 * Year of manufacture: 2021 * ABS, Anti-lock Braking System Ledpeyib D Eefx Ackjab * EBS, Electronic Braking System * Air suspension * Lift axle * Follower-steered axle (trailing steering axle) * Duomatic air connection * 15-pin connection plug * Storage box/toolbox * Telescopic – telescopic semi-trailer * Suspension: Air * Gross vehicle weight: 42,000 kg * Unladen weight: 6,200 kg * Payload: 35,800 kg * Perm. gross weight: 42,000 kg * Axle manufacturer: SAF * Tyre condition 1st axle: 70% -- 60% - Tyre size: 385/65 R22.5 * Tyre condition 2nd axle: 60% -- 60% - Tyre size: 385/65 R22.5 * Tyre condition 3rd axle: 60% -- 50% - Tyre size: 385/65 R22.5 * Tyre sizes: 385/65 R22.5 * Mileage: 280,039 km * Telescoping length: 3,500 mm * Extension range: 9,450 mm – 12,950 mm * 6x steel bolster frames with Ecco-Steel squared stanchions * Timber transport: 2x 6 m, 2x 5 m, 3x 4 m, 3x 3.7 m, 3x 3 m; long timber up to 14 m * 3rd axle is trailing-steered with reverse lock Liability disclaimer: Subject to change, prior sale, and errors excepted. Further photos and videos available on our website. Our comprehensive service offer includes, for example: * Purchase/Sale/Rental of commercial vehicles * Fast, hassle-free financing * Application for all (export) documents * Procurement of export/customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections, registration service * Transfer of commercial vehicles For further information, our trained specialists are at your disposal and will be happy to advise you.

Condition: used, empty load weight: 6,200 kg, maximum load weight: 35,800 kg, overall weight: 42,000 kg, axle configuration: > 3 axles, first registration: 02/2021, suspension: air, tire size: 385/65 22,5, tire condition: 50 %, color: brown, Year of construction: 2021, operating hours: 2,75,194 h, mileage: 2,75,194 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69699 Doll, H3L-14 * Year of manufacture: 2021 * ABS, Anti-lock Braking System Lajdpfx Aceyib Ikskjb * Air suspension * Lift axle * Trailing steering axle * Air connection Duomatic * 15-pin connector plug * Storage/toolbox * Suspension: Air * Gross weight: 42,000 kg * Unladen weight: 6,200 kg * Payload: 35,800 kg * Permissible gross weight: 42,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 40% -- 40% - Tire size: 385/65 R22.5 * Tire condition 3rd axle: 60% -- 60% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Mileage: 304,338 km * Telescopic extension: 3,500 mm * Extension: from 9,450 mm to 12,950 mm * 6x steel bolster bodies with Ecco-Steel square stakes * Timber transport: 2x6m, 2x5m, 3x4m, 3x3m, 7m, 3x3m; long timber up to 14m * 3rd axle with trailing steering and reverse lock Liability disclaimer: Subject to changes, prior sale, and errors excepted. More images and videos available on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing options * Handling of all (export) documentation * Ordering of export/license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading and load securing * TÜV inspections, registration service * Delivery/transport of commercial vehicles Contact our trained professional staff – we will be happy to advise you.

Condition: used, empty load weight: 6,200 kg, maximum load weight: 35,800 kg, overall weight: 42,000 kg, axle configuration: > 3 axles, first registration: 02/2021, next inspection (TÜV): 02/2027, suspension: air, tire size: 385/65 22,5, tire condition: 60 %, color: brown, Year of construction: 2021, operating hours: 2,75,194 h, mileage: 2,75,194 km, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 69700 Doll, H3L-14 * Year of manufacture: 2021 * ABS (Anti-lock Braking System) * Air suspension * Lift axle * Trailing steering axle * Duomatic air connection * 15-pin connector plug * Storage/toolbox * Valid inspections: General (HU)/Emissions (AU) until 02.2027 * Suspension type: Air * Gross vehicle weight: 42,000 kg * Unladen weight: 6,200 kg * Payload: 35,800 kg * Permissible gross weight: 42,000 kg * Axle manufacturer: SAF * Tire condition, 1st axle: 70% -- 60% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 60% -- 60% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 60% -- 60% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Mileage: 275,194 km * Extendable by 3,500 mm * Extension from 9,450 mm to 12,950 mm * 6x steel bolster bodies with Ecco-Steel square stakes Lsdsyib E Aspfx Ackoab * Timber transport: 2x6 m, 2x5 m, 3x4 m, 3x3.7 m, 3x3 m; long timber up to 14 m * 3rd axle with steering lock (self-steering/reverse lock) Liability disclaimer: Subject to changes, prior sale, and errors. More pictures and videos available on our website. Our comprehensive range of services includes, for example: * Purchase/sale/rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export/customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/lash securing * TüV inspections, registration service * Transfer/delivery of commercial vehicles Ask our trained specialist staff—we’re happy to advise you.

Year of construction: 2024, condition: new, The CNC laser machine with two laser heads and a conveyer table? That’s double and non-stop productivity! This laser cutter works with wood, plywood, paper, plexiglass, plastic, rubber, leather, stone, etc. But it's primarily intended to run fabric rolls. Two laser heads function simultaneously at a minimum distance of 130 mm apart. Each has its own 100–120W laser tube, making it possible to work at fast rates. The conveyer table feeds materials uniformly to the machine, with no folds. You can give our managers a call for additional details! Wattsan 1610 Duos conveyer characteristics: Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Lodpfx Aceiinlhokjab Machine size: 2200 x 1800 x 1105 mm Packing size: 2300 x 1980 x 1200 mm Weight: 770 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2024, Lights! Camera! Action! This CNC laser machine has a working area of 1600x1000 mm, which is lit by light panels on the sides, and a Canon camera. All for it to majestically operate fabrics, fut, tule, leather, and other materials. The camera recognizes and scans contours and shapes, and then transfers them to the computer. In a special program, the operator can make the necessary changes to the drawing and send it for cutting. Easy and convenient. There is no need for a hand-made lingering process. Laedpfx Ajrzrmbjcksb You can give our managers a call for additional details! Wattsan 1610 Cam conveyer characteristics: Working area: 1600x1000 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 2200 x 1800 x 1105 mm Packing size: 2300 x 1980 x 1200 mm Weight: 770 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, mileage: 4,48,190 km, power: 552 kW (750.51 HP), first registration: 01/2022, fuel type: diesel, overall weight: 33,664 kg, axle configuration: > 3 axles, brakes: retarder, color: gold, gearing type: automatic, emission class: euro6, loading space length: 7,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Internal vehicle number: VTC20016 Financing example: * Internal number: VTC * Purchase price: €89,900.00 * Down payment: 10% * Term: 60 (months) * Monthly rate: €1,400.27 * Final residual value: €15,980.00 Ljdpfx Aoxummqsckeab If you are interested in this offer or wish to adapt it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We are happy to take your used vehicle in trade. Financing available directly with us. GOLEC Nutzfahrzeuge GmbH Languages spoken: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: good (used), Sturdy block clamping carriage for horizontal fence or band saw Ledpfx Astqd Naocksab Length approx. 9.0 m. Track width 920 mm. 6 clamping blocks. With hydraulic feed. Also suitable for feeding drying kilns etc.

Condition: used, Year of construction: 2000, functionality: fully functional, Holtec sorting block train, type SBZ. Length 94.5 m. 52 boxes. Lasdpsw Ug Agsfx Ackeb

Condition: new, Year of construction: 2025, functionality: fully functional, CONSTMACH log washer (Pallet Washer) is a high-performance washing machine developed specifically for cleaning large aggregates with high clay content. Designed to deliver maximum efficiency under demanding working conditions, this system effectively removes dirt from the material, ensuring high-quality aggregate production in construction, mining, and recycling facilities. Its twin-shaft design creates a powerful scrubbing effect on the material, breaking down even the most stubborn dirt and ensuring clean, ready-to-use material. The CONSTMACH pallet washer offers operators high flexibility with its adjustable shaft angle and speed control, enabling optimal washing performance for different types of aggregates. Its robust body, high-strength material usage, and easy maintenance ensure long-lasting operation. Furthermore, it can process hundreds of tons of material per hour without compromising cleaning quality, even in facilities requiring high capacity. This equipment improves the quality of aggregates used in construction projects, optimizes mineral separation processes in mining, and contributes to the production of reusable materials in recycling plants. Effective removal of foreign matter extends the life of subsequent crushing and screening equipment and reduces operating costs. Log Washer (Pallet Washer – Coarse Material Washer) Technical Specifications Machine Size: 2000 x 7000 mm (Double Shaft) Electric Motor Power: 2 x 37 kW, GAMAK Brand, IE3 Efficiency Class, 1500 rpm Feed Size: 0 - 50 mm Main Body Material: S235JR A1 Quality, 8 mm Rolled Sheet Rotation Speed: 15 - 25 rpm Helix: Double Shaft Spiral Pallets, S235JR, 8 mm Sheet, Cast Arms Resistant to Wear and Hardox Coating Shaft: Cr-Ni-Mo Alloy Steel Body: GS52 Steel Casting Bearings: SKF or FAG, Heavy Duty Roller Bearings Production Capacity: 200 - 400 t/h Weight: 24,000 kg Why Should You Choose CONSTMACH Log Washer (Pallet Washer – Coarse Material Washer)? CONSTMACH combines quality, durability, and efficiency with its log washer systems developed through years of experience. Each component is designed for long life and minimal maintenance. Thanks to its high-capacity washing performance, energy efficiency, and ease of use, you will get the most out of your investment in the shortest time possible. CONSTMACH also guarantees the uninterrupted operation of your business with its after-sales support and spare parts services. If you are looking for a reliable solution for clean, solid, and high-quality aggregates, the CONSTMACH pallet washer is the right choice. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting Lasdpoxp Urdsfx Ackjb

Condition: used, mileage: 5,29,640 km, power: 353 kW (479.95 HP), first registration: 05/2014, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, crane, parking heater, TGS 26.480 6x4 crane KESLA 2124 with winch, aluminum rims, tires approx. 60% Ljdpfov Ut Tujx Ackoab

Condition: new, maximum load weight: 16,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 3,500 mm, total width: 2,550 mm, total height: 955 mm, Year of construction: 2026, Equipment: ABS, rapid+ 2-axle center-axle trailer A2T-LZ35 ALPHA * Only 2,600 kg unladen weight * Air suspension * 2 single axles, SAF brand, 9 t with disc brakes, including safety cables * 265/70 R 19.5 tires on high-gloss aluminum rims * Aluminum air reservoirs Ledpfxshnakns Ackjab * EBS braking system * Full LED lighting * 4x LED work lights (1,800 lumens) * 2x grab ropes * Paint finish: frame/stool color graphite black * Drawbar with Ø 50 mm towing eye * Side impact protection according to ECE R 73 * For transporting 1 x 3 m / 1 x 4 m / 1 x 5 m of timber * 2x ExTe D10 stools + conical stanchions Ex works in Mildenau. Subject to change and prior sale. Further information available upon request. Information provided without guarantee. Images may differ from the original. Contact: Niclas Lott Tel.:

Condition: used, Year of construction: 1993, operating hours: 47,000 h, functionality: fully functional, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, We offer this used Baljer & Zembrod machine for log yards, year of manufacture 1993. Track width: 3m Crane type: OBX II Lifting capacity without grapple: 1900kg/15.2m Grapple: without Crane position: Rear of cab Cab side: Left Saw: 1.3m Alpha With HEB500 running rail Cutting bench with waste scraper chain If you have any questions or require further information, please feel free to send us a message or call us. Ledpfx Acjyz Twrsksab

Condition: used, Hedlund log sorting line 2x19 pockets Manufacturer: Hedlund Pockets: 2x19 Year: 1980 Step feeder: Hedlund 2008 Control system: Siemens S7 300 Ljdpfeyudllox Ackjab

Condition: used, mileage: 6,15,000 km, power: 427 kW (580.56 HP), first registration: 11/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: green, gearing type: automatic, emission class: euro6, loading space length: 6,700 mm, Year of construction: 2017, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, parking heater, Scania R580 6x4 timber vehicle, folding rear crane Palfinger Epsilon 150Z (year of manufacture 2017), Euro 6, automatic transmission, retarder, long-distance cab CR19, leaf-air suspension, timber superstructure with stanchions, trailer coupling, ACC, lane keeping assist, leather seats, automatic climate control, auxiliary heater, TV, beacon lights, air horns, navigation system, fridge compartment, coffee machine, heated seats, electric windows. Lsdpfxoyy Hdcj Acksab

Condition: excellent (used), Log band saw system Band saw stand - Brenta 1500mm roll diameter Lsdpfx Acofhl Snokjab Band saw carriage Artiglio Eagle 1100 3 trestles With complete mechanization

Year of construction: 2022, condition: new, Please contact us for more information. Laodpfx Acopa Rqvoksb

Year of construction: 2020, condition: new, Selling price: € 150, US$ 158 Laedpfx Acoph Rmkjkeb Galen Group designs and manufactures tough, durable, specialized forestry attachments for a wide range of applications. Our forestry attachments, deck mowers, grapples, log jaws, and tree shears, are designed and, on occasion, customized to arrive fully compatible with your tractors, loaders, excavators or skid steers. We offer product lines with multiple models to work seamlessly with different drive systems and horsepower capabilities. GALEN forestry attachments deliver excellent return of investment for the equipment investment. When you’re ready to get down to work, pick up a orange one that is the GALEN attachments! Price is representative, for detailed information please contact us.

Condition: new, Year of construction: 2023, Galen log grapple for a 20-ton excavator offers exceptional durability and efficiency, perfectly tailored for demanding logging operations. Its robust design and advanced hydraulic system ensure precise control and handling of various log sizes, enhancing operational productivity and safety. For detailed information please contact us Laodsqtrrdepfx Ackjb

Condition: new, Attachment suited for: Construction machines Cargo space capacity: 1.350 l Selling price: € 8.000, US$ 8.475 Volvo L60 Wheel Loader Log Grapple Volvo L60 General Purpose Bucket Lodpfxen Tm Iue Ackoab For detailed information please contact us