Used Log Sorting for sale (28,602)

Condition: good (used), Paddle ejector for sorting belt Length: approx. 600 mm Working height: 850 mm Drive: Rexroth servo Djdpfx Adjqmizdjdjwf more available also other length

Condition: new, empty load weight: 6,180 kg, maximum load weight: 32,320 kg, overall weight: 38,500 kg, axle configuration: 3 axles, total length: 25,500 mm, total height: 1,19,400 mm, suspension: air, front tire size: 385/65 R22.5, rear tire size: 385/65 R22.5, Equipment: ABS, MEGA 3-axle timber / log trailer | Permissible total weight: 38,500 kg | Unladen weight: 6,180 kg | Payload: approx. 32,320 kg | Length: 11,940 mm | Width: 2,550 mm | 3rd axle: lift axle | Tyre size: 385/65 R22.5 | Aluminium side guard and toolbox | Air suspension and disc brakes | Loading length: approx. 11.94 m | Stake height: approx. 2.50–2.60 m | Subject to errors, input mistakes and prior sale Djdpfx Aexdfcijddswf

Condition: used, Linear feeder / Vibratory feeder / Sorting device Vibratory linear feeder, vibratory hopper, dosing hopper, storage hopper Vibratory bowl feeder, bowl feeder Vibratory bowl, screw feeding system with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Year of manufacture: approx. 2000 Useful load: approx. 1.5 kg Oscillation frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz Dsdpfxsxf Urvs Addswf - Oscillating plate L x W = 170 x 60 x 12 mm - Mounted track length 340 mm - Overall height with base plate and oscillating plate approx. 115 mm Required space L x W x H: 400 x 280 x 400 mm Weight: 9 kg Good condition

Condition: new, machine/vehicle number: f044065451f6d849ee7a5b9f8, empty load weight: 5 kg, maximum load weight: 29 kg, overall weight: 35 kg, axle configuration: 3 axles, tire size: 385 / 65 r 22,5, Further information Chassis semi-trailer forwarding Welded steel construction in reinforced design, only 2 side members as double T-beams with steel/checker plate between the side members, saddle plate with replaceable 2 kingpins. Protective plate for rear lights. 1 steel storage box, recessed between side members 8 pairs of lashing eyes bolted or welded to the frame at the manufacturer's choice 24 t. 2-speed support winch, single-sided operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Aluminium side bumper Galvanized steel underride guard Half-shell mudguards with anti-spray flaps according to EC 1 spare wheel holder for 1 e-wheel, with wheel fastening set 8 wooden stanchions of the manufacturer's choice, bolted to frame with 2 wooden stanchions each, telescopic from 1800 to 2800 mm, per pair 7 to. Djdsi Rivwopfx Addswf Axles + suspension SAF disk brake axles with 430 mm disk diameter Air suspension with lifting & lowering valve, safety cable on the axles 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Axle spacing offset mm (combined transport) up to 44 tons gross train weight Wheels and tires 385 / 65 R 22,5 at the manufacturer's discretion Steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installed (no calibrated scales) 2 swap-proof coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin and 1 x 15-pin interchangeable sockets at the front, without connecting cable Front bulkhead/front stanchions Steel/grid bulkhead, approx. 2,300 mm high, bolted to the frame Approval / plates Country of approval: Germany Approval according to EC 2007/46 Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Black coated support legs Front wall hot-dip galvanized Attention: Archive pictures!

Condition: used, maximum load weight: 22,590 kg, overall weight: 33,000 kg, axle configuration: 2 axles, first registration: 07/1989, DIEBOLT two-axle telescopic semi-trailer with timber loading crane mounted on the gooseneck, loading platform extension to approx. 15,540 mm, Loglift grab, turntable support, 1 x hydraulic extensions, grab control, high-seat control, BPW axle(s), twin tyres, drum brake system, leaf suspension, towing coupling, vehicle may be wrapped and/or labelled with advertising Dsdpjxfpb Ejfx Addowf

Year of construction: 2021, operating hours: 3 h, condition: as good as new (ex-display), functionality: fully functional, The ST – 100 roller sorting table is a reliable device that enables precise manual selection of various types of vegetables. The moving and rotating products can be easily and accurately inspected. They are manually separated onto another conveyor line, from where they will either be discarded or placed onto another processing line. A highly useful feature of the table is the ability to adjust the speed of the moving vegetables seamlessly using an inverter. Additional lighting enhances working comfort, allowing for even more precise sorting. Dwodpfjv Uad Tex Addjf The sorting table is available in several sizes, providing the flexibility to choose according to the user's specific requirements. Replacing traditional PVC rollers with more durable aluminum ones ensures long-term reliability. Even after years of continuous operation, they will not be damaged or deformed. The ST – 100 sorting table can operate independently but is often integrated into a complete processing line consisting of other machines manufactured by DOMASZ. For more demanding customers, we recommend a table made of acid-resistant stainless steel. Key Features of the ST-100: Deformation-resistant aluminum rollers Stepless speed adjustment (inverter) Work area illumination lamp Adjustable working height Transport wheels with brakes

Condition: used, maximum load weight: 17,450 kg, overall weight: 21,000 kg, axle configuration: 2 axles, first registration: 02/2022, next inspection (TÜV): 10/2026, Equipment: ABS, Underride guard steel plastic mudguards continuous aluminum frame cover manual mechanical support (5t drawbar load) drum brakes 2 LED work lights stool body, 4 x Doll steel stools type Mammut 8 x Doll square stanchions rigid 2550mm loading lengths: 2 x 2000 mm/ 2500 mm/ 3000 mm or 1 x 4000 mm/ 5000 mm/ 6000 mm 50 mm drawbar eye Doder Ahg Dspfx Addewf

Condition: used, overall weight: 3,850 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2026, loading space volume: 77.5 m³, total length: 25,500 mm, total height: 1,19,400 mm, suspension: air, maximum speed: 100 km/h, front tire size: 385/65 R22.5, rear tire size: 385/65 R22.5, Equipment: ABS, MEGA 3-axle timber / roundwood trailer. Permissible total weight: 38,500 kg. Unladen weight: 6,150 kg. Payload: approx. 32,350 kg. Length: 11,940 mm. Width: 2,550 mm. Axles: 3 x 9,000 kg (Haldex brake system). Tire size: 385/65 R22.5. Sturdy stake construction for secure timber transport. Aluminum side guard and toolbox. Air suspension and disc brakes. Dwsdpfx Ajw Nqv Hjddef

Condition: used, Vibratory Bowl Feeder / Sorting Device / Spiral Feeder / Vibratory Feeder RNA Vibrating bowl, Sorting device / Screw feeding with vibratory feeder for screw technology Feeding system, Feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2L Year of manufacture: approx. 2000 Upper bowl diameter: 250 mm Lower bowl diameter: 190 mm Bowl internal height: approx. 35 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 240 mm Dwedpexf Urpsfx Addsf Power supply: 230 Volt, 50 Hz. - RNA control unit, model ESG 90, for adjustable vibration speed - The feeder was used for supplying automotive blade fuses Required space Ø x H: 250 x 240 mm Weight: 13.5 kg Good condition A vibratory bowl feeder always consists of two essential components: 1) Sorting bowl, where the parts are oriented 2) Drive unit, which generates vibrations via mechanical oscillations in the sorting bowl and thus sets the parts in motion.

Condition: new, machine/vehicle number: 057736dac221bda3fc469966a, empty load weight: 3 kg, maximum load weight: 8 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Fine-grained steel welded construction Slightly sloping outer frame with Load-Lock profile for attaching tension beltsNote! To attach the belts in conjunction with drop sides, the drop sides must be opened! Front gear support leg Folding rear support 2 wheel chocks with holder Galvanized steel underride guard Quarter-shell mudguards 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) 1 open storage compartment for stanchions, underneath loading area 4 pairs of stanchion pockets embedded in the outer frame, 83 x 83 mm internal dimensions 4 stake pockets centrally recessed in the floor, with reinforcements to the main frame, 83 x 83 mm internal dimensions 6 pairs of stanchions W=80/ D=80/ L=2000 mm, hot-dip galvanized Note: Stanchion pockets / stanchions are not designed for securing long material, pipes etc. on their own without wrapping around them. Dwjdei Ri H Depfx Addof Tandem trailer drawbar Drawbar with tested 40 mm drawbar eye Drawbar mechanically adjustable in length by 4 x 500 mm from 1800 - 3800 mm, drawbar length set to 1800 mm, (Note! Observe load distribution and drawbar load) Axles + suspension GFA axles with angular roller bearings and S-cam brake Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Screen printing plates approx. 30 mm thick, for high point load capacity Note: Floor warping due to weather influences possible! Platform length approx. 6,200 mm Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. Approval / plates Country of registration: Germany With Dekra approval and expert opinion 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Attention: Archive pictures!

Year of construction: 2020, condition: like new (used), Tapered rollers 550mm for log transport solid construction, good condition Dodpjgvvvlsfx Addswf 2 pieces available roller length: 800 mm roller diameter: 400 mm shaft diameter: 45 mm 2 stationary bearings INA Sprocket: z= 25, zt=30, diameter: approx. 280 mm

Condition: used, Log debarker Manufacturer: Valon Kone Model: VK26M Debarking capacity: 10cm -61cm diameter Rotor opening = 65cm Dwsdpfx Asxiv Srsddjf Speed: 17-42m / min 3m or longer (wood length) Length 2.90m Width 1.65m Height 2.20m

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2022, Year of construction: 2022, Equipment: ABS, * Doll H3L-14 timber transporter * First registration: 02-2022 * Telescopic 9.45 - 12.95 m * SAF axles * Tyres 385 / 65 R 22.5 * Disc brakes * Lift axle * Unladen weight: 6,140 kg Dwsdpjxqvxzefx Addof * Payload: 35,860 kg * Gross weight: 42,000 kg * More pictures and videos via Whatsapp * Information provided without guarantee; intermediate sale reserved.

Condition: used, maximum load weight: 31,180 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2020, next inspection (TÜV): 02/2023, loading space length: 13,000 mm, total width: 2,550 mm, total height: 1,320 mm, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa bolsters * 16x OptiPa one-piece aluminum stanchions * Stable aluminum bulkhead at the front approx. 2500 mm high * Maximum fifth wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with traction aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart Board * EBS braking system * All cables are protected inside the longitudinal beams * Smooth sheet metal cover 3mm welded through between the longitudinal beams * Tires: 6x branded tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and Position lights * Plastic fender, 180 degrees, above each axle * Underrun protection made of round tube, mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic * Side impact protection made of anodized aluminum * KTL coating with zinc phosphating, maximum corrosion protection Dsdpfx Adji Rtd Ijdowf Also available for rent at short notice. We are happy to provide you with further information

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced Dedpjxf Up Ujfx Addowf - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: ready for operation (used), Log infeed line Tähkä, equipped with a lower device for turning logs Dodpfxsxg Rvge Addjwf

Condition: good (used), Year of construction: 2003, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1658, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, cutting diameter: 1,500 mm, Equipment: cabin, crane, Baljer&Zembrod OBX II/III Year of manufacture: 2003 In daily operation Condition: Well maintained. Dedpexpvr Sofx Addowf

Condition: used, Board sorting pockets IDL000771 - electric motors 14 pcs x 0,55 kW - inside width: 6400 mm - pocket length: 2600 mm - between rails: 1200/800/900/900/900/900 mm Dwedpfx Adjt Ebn Dedof - in each section 6 rails

Condition: new, maximum load weight: 30,300 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, Year of construction: 2025, Equipment: ABS, 3-axle timber transport trailer * 8x OptiPa stool bodies * 16x OptiPa one-piece aluminum stanchions * Sturdy aluminum front wall approx. 2500 mm high * Max. fifth-wheel load approx. 12000 kg * Front overhang (kingpin to front edge of KoRa) 1550m * Air suspension with 3x 9t axles from SAF * Axle reinforcement for off-road * Axle lift first axle, automatic function, with starting aid * Scales * Total weight technically possible 39,000 kg * WABCO Smart-Board * EBS brake system * All cables are protected inside the side members * 3 mm smooth sheet metal cover welded through between the side members * Tires: 6x brand-name tires size 385/65 R 22.5 * LED reversing lights and work lights * LED tail lights and position lights * Plastic mudguards, 180 degrees, above each axle * Round tube underride guard mounted as high as permitted * Maneuvering coupling at the rear * Ten welded ring elements for lashing on each side * 2x toolbox approx. 600x400x400, plastic Dedpfei Rtgqjx Addowf * Anodized aluminium side bumpers * KTL coating with zinc phosphating, highest corrosion protection Also available for hire at short notice. Further information on request.

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed Dwjdpfxeux Shvj Addof - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 52 kg In good condition A bowl feeder always consists of two main components. 1) Sorting bowl, which aligns the parts 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts.

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, Renholmen greensorting line 45 sorting pockets, sticking machine with sticks handling and Finnscan + OT-laite, speed is 100 m/min and it is fully automated line with stickhandling one operator, automation is made 2019 Dwjdjxg Rgxjpfx Addef Workpiece length max - 6.100 mm

Condition: refurbished (used), Dry board sorting line - dry board sorting line - 20 pockets - belt - automatic spacer collection - Trimmer Almab with 16 saw blades - automation- TG automation, Sweden Sorting Dedpfx Adsvzqcyjdjwf - Dynalyse MC Pro 2400 System - marking/printer - Alpha Dot Merlyn 350 - Drum chipper Erjo 204 MA - stacker Almab with 9 cassettes - Pack press

Condition: new, maximum load weight: 32,900 kg, overall weight: 40,000 kg, axle configuration: 3 axles, loading space length: 13,510 mm, loading space width: 2,450 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, PAVIC OptiPa PRSH 27 platform semi-trailer for transporting wood and long material. * Chassis length approx. 13510 mm (head frame - head frame) * Chassis width approx. 2540 mm (outer frame - outer frame) * Driving height unloaded approx. 1400 mm with fifth wheel height 1200 mm * Maximum fifth wheel load approx. 16000 kg * Front overhang (kingpin to front edge of KoRa) 1550 mm * King pin 2" according to SAE standard, replaceable from below * E-bike holder for 1 E-bike * 16 stanchion pockets embedded in the outer frame * 8 pockets as storage for stanchions distributed centrally over the entire length * Front wall approx. 2500 mm high, angled corners with sheet metal cladding * Steel floor 4/6 mm tear plate cover * Outer frame with rounded edges and holes for load securing approx. every 500 mm * Axle lift first axle, automatic function, with traction aid * Axle distance approx. 1310/1310 mm * Branded tires 385/65 R 22.5 * EBS braking system with roll stability program * Smartboard/TIM/Infocenter, in addition to the H+S valve Dwedpjvw Hnwjfx Addsf * LED lighting system * LED work lights * 2x plastic toolbox We are happy to provide you with further information

Condition: used, Green horizontal board sorting line IDC000060 - Manufacturer: Almab Dodpfxotk Hnbo Addswf - 4 pockets - Trimmer - Stacker with spacers - Automation Nolyx - 2018

Condition: used, Year of construction: 1999, Jonsered 1090 log crane for sale IDL000814 Dwsdpfx Adju Efwqodef