Used Long Belt Sanding Machine for sale (72,297)

Condition: new, DEMONSTRATION MACHINE For sale is an as-new JET Oscillating Edge Sander OES-80CS featuring a 400V motor / 2,800 watts and a belt speed of 17 m/s. The demonstration machine is in its original condition, so you receive the full warranty. Technical Data - Motor: 400 V / 2,800 watts - Belt speed: 17 m/s - Belt dimensions: 150 x 2,260 mm - Belt inclination: 90° – 180° - Belt table dimensions: 810 x 180 mm - Extension table: 250 x 300 mm - Oscillation stroke: 13 mm - Oscillations per minute: 108 - Extraction port diameter: 100 mm - Dimensions: 1,300 x 670 x 1,230 mm - Weight: 124 kg Cjdpfx Ano Ahw Haoushd The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Freight shipping: Austria: €70.00 incl. VAT Germany: €90.00 incl. VAT South Tyrol: €110.00 incl. VAT Related terms: JET OES-80CS, edge sander, oscillating, woodworking, 400V, machine, belt sanding technology, workshop equipment, industrial quality, 150x2260, belt Reference: R-A0117

Condition: not inspected (used), Number of sanding units 4 St sanding width 190 mm Sanding height max. 4-180 mm weight 4200 kg Hess Expert 4-belt single wood sanding machine machine will be checked by our technicians ----- Ø Grinding at the bottom/top Ø With 2 offset grinding units each (bottom and top) Ø Grinding units (bottom and top) connected in series according to the Dressing principle Ø Pre-sanding with coarse grit (calibrate) Ø Regrinding with fine grit (finish) Ø Central motorized height adjustment of the lower grinding units Ø Central motorized and synchronous height adjustment of the entire upper Grinding and brushing units including the upper transport units Ø Oscillating sanding belt utilization (during the sanding process) Ø Absolute power connection thanks to 5.5 KW motors and large dimensions drive drums Ø Oxide ceramic grinding shoe for - exact surface geometry - no adjustment work - permanent dimensional accuracy - completely maintenance and wear-free Basic structure: Stable, heavy welded construction made of strong-walled rectangular profiles additional, statically calculated reinforcements for optimal Vibration dampening. Staggered grinding units with large dimensions Belt drive drums for slip-free belt running. Two-point suction for direct and flying dust with sealing brushes and integrated sanding belt blow-off Device to increase the service life of the sanding belts. Grinding units in Cjdpfxst Tqy Ej Anujhd heavy steel plate construction as the basis for vibration-damped, quiet tape running. Absolutely backlash-free guides as ball linear sets hardened and ground shafts. Height adjustment of the grinding units via hardened and ground special linear guides as well as pre-tensioned ones Guide carriage. Permanent precision thanks to dust and dirt protection Ball linear sets and guide carriages. Large-sized pre-grinding rollers as contact rollers. Contact rollers and Sanding shoes in a balanced ratio to the sanding belt grain load. The large drive drums guarantee full transmission the 5.5 kW drive power of the grinding motors on the sanding belt. Therefore Slip-free, stable running and optimal heat dissipation. This makes it the strongest Chip removal possible. Automatic machine stop activation in the event of a belt break. Visual display on the control panel and via flashing lights on the machine. Sanding shoes for finish completely maintenance-free and wear-free made of oxide ceramic with optimal heat dissipation. Grinding belt tension via appropriately sized compression springs. Sanding belt relaxation for belt changing using a pneumatic device sensitive, distortion-free placement of new tapes. Upper grinding unit and brush device centrally motorized Height adjustable with digital display in the control panel for the motorized Grinding thickness adjustment. Brushing and finishing device, for better surface finish, integrated into the basic machine. Two special brush rollers 150 mm Æ arranged one above the other in synchronous function for advance thrust. Separate height adjustment of the brush rollers on precise Carriage guides for post-correction of wear. Additional transport roller for Removal or further transport of the workpiece from the automatic grinding machine with the conveyor belt. Wooden guide in the inlet area for hard guide and bearings mounted on both sides pressure rollers. Safe transport of profiled workpieces on ca...

Year of construction: 2013, condition: used, Number of sanding units 4 st. sanding width max. 200 mm Sanding height max. 7-150 mm Working speed 8-16 m/min Band Speed 18-30 m/sec Stähle-Hess Sanding Machine Saturn-Duo ----- Manufacturer's Technical Description: Stähle-Hess Finish Sanding Machine, Model Saturn Duo Featuring 2 sanding units, plus additional upper and lower Roto-Finish sanding units. 1 Upper sanding belt 1 Lower sanding belt 2 Upper Roto-Finish sanding units 2 Lower Roto-Finish sanding units Workpiece Dimensions Height: 7–150 mm Width: max. 200 mm Minimum length: 300 mm Belt speed: 18–30 m/s (variable) Feed rate: 8–16 m/min (variable) ----- Price for the above-mentioned machine available upon request! ----- Note: This machine was previously used in conjunction with a Weinig Variomat four-sided planer/moulder (see Stock No. #7007). Chjdpfxoy Spvls Anujd (Technical specifications provided by the manufacturer – subject to verification!) All listed prices are net, plus applicable statutory VAT.

Condition: used, Year of construction: 2015, machine/vehicle number: MB536013A, functionality: fully functional, power: 28 kW (38.07 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, overall weight: 2,800 kg, We are offering this used COSTA MD5CC 1350 belt grinding machine, manufactured in 2015. Model: MD5CC 1350 Serial number: MB536013A Chodpfx Anozlcipjusd Voltage: 400 V Frequency: 50 Hz Power: 28 kW Current: 54 A Year of manufacture: 2015 Total weight: 2800 kg If you have any questions or require further information, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, width of the strips 50.0 mm band length 940 mm band speed 3.0 - 22 m/min turning speeds 1450 U/min tube diameter 10.0 - 114 mm radius 180 ° total power requirement 4.75 kW Csdpfx Ajxaaxqonuohd weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Condition: new, Edge sanding machine KSO 1505 Holzkraft -Exhibition machine- - Dust extraction port diameter: 100 mm - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm - Connection voltage: 400 V - Mains frequency: 50 Hz - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding area length: 1010 mm - Sanding area width: 190 mm - Maximum sanding height: 170 mm - Swivel angle of sanding unit: 0 – 90 ° Codsvxkv Ujpfx Anuohd - Maximum workpiece width: 1010 mm - Maximum workpiece height: 150 mm Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg -1x sanding belt 2750x150mm, grit 80 -1x sanding sleeve Ø38mm, grit 80 -1x sanding sleeve Ø50mm, grit 80 -1x sanding sleeve Ø75mm, grit 80 - New exhibition machine -

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 02/96088A, total length: 7,500 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 7,500 kg, Edge grinding machine with 10 programmable profiles, including rounded edges Pre-milling cutter 10 face milling operations 4 chamfering operations 2 water break grooves Calibration support Belt feed direction from left to right Deburring cutter Unit for water break grooves from above and below Can grind 9 profiles – e.g., bullnose, full round, half round, small rounding on the top and bottom, chamfered, quarter round. Cedpfx Anezpy Drjuehd

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Cedpfx Anowyda Ujuohd Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: used, functionality: fully functional, Year of construction: 2012, machine/vehicle number: 30012, overall weight: 2,000 kg, total length: 6,600 mm, total width: 1,700 mm, Equipment: CE marking, documentation/manual, The long bending machine is exclusively used for bending and folding sheet metal (e.g., galvanized steel sheet, aluminum sheet, copper sheet, etc.) up to a thickness of max. 1.0 mm (according to the manufacturer). It is stable, reliable, and ideal for workshops or metalworking. Very good condition, ready for use. Technical data according to the manufacturer: - Machine type according to manufacturer: Long bending machine 6020/A - Year of manufacture: 2012 - Machine number: 30012 - Bending angle: approx. 140° - Weight: approx. 2000 kg - Dimensions: 6.60 m x 1.70 m - Electrical connection: Three-phase 230 V/400 V – 1.5 kW 230 V/400 V – 2.2 kW (AV) - Bending angle: 90° - 180° - Galvanized steel sheet up to 1.0 mm - Aluminum sheet up to 1.5 mm - Smallest bend radius depending on sheet thickness and sheet type: 15 mm - Main switch, hydraulic unit, upper die, bending die, indicator light, control, safety stop, foot switch, emergency stop bar, stabilizers - Accessories: Hand shears I am available at any time for further information! - No guarantee, no warranty, no return or exchange. - Signs of wear, ready for use. - Sold as seen! - Payment: Cash upon collection/advance payment. Cjdpjz Akgwofx Anushd

Condition: excellent (used), Heavy-duty double-sided edge sanding machine, oscillating Motor power approx. 3.0 kW Oscillation with own motor approx. 0.2 kW Sanding belt dimensions 3000 mm x 200 mm Front sanding table 980 x 340 mm rear sanding table 750 x 300 Space requirement L x W x H approx. = 1800 x 1500 x 1000 mm Weight approx. 600 kg Front sanding table with veneer edge sanding device Rear sanding table with infinitely variable angle adjustment Angle stop on rear work table Oscillation by means of gear motor Pneumatically height-adjustable sanding beam Interchangeable radius sanding discs Pneumatic belt tension, adjustable Extraction with blower Attachment option for feed unit 2 lateral support tables for radius sanding Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number). Csdsuxqzuepfx Anuohd

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine should have. A solid, cast iron grinding unit with a powerful motor ensures maximum sanding performance. The work table, which is height-adjustable by spring pressure, allows for optimal belt utilization and safe operation. Optionally, a belt oscillation, stepless unit swivel, veneer sanding device, and an additional table for sanding work on the idler roller can be retrofitted. The machine is supplied with a range of sanding belts; a miter and angle stop are also included in the scope of delivery. Technical data: • Motor power: 2.2 kW • Sanding belt size: 150 × 2280 mm • Sanding belt speed: 22 m/sec • Table size: 750 × 350 mm • Space requirement: 1000 × 800 mm • Weight: from 180 kg • Dust extraction diameter: 100 mm Chjdpfed R Ev Djx Anuod Location: In stock at warehouse 54634 Bitburg - free for collection - Can be shipped for an additional fee.

Condition: used, Year of construction: 1991, Machine is tested, with new frequency converter. - Manufacturer: Fladder Cedozia Nnopfx Anuehd - Model: Gyro 300 Vacuum - Working width: 1300 mm - Year of manufacture: 1991, good condition - Flex Trim sanding heads - Quick-change sanding media - Sanding media grit: K240 - Sanding media length: 45 mm with support brushes - Abrasive slits: 20 and 5 mm - Number of brush heads: 6 - Rotating and oscillating sanding unit - Motor power: 5 kW - New frequency inverter for the conveyor belt - With vacuum conveyor belt - Feed rate: continuously adjustable from 2 to 8 m/min - Length: 2070 mm - Width: 2370 mm - Height: 2240 mm - Weight: 2300 kg - Location: In stock, D 32825 Blomberg - Volts, Hz: 400 / 50 - Can be tested in Blomberg

Condition: used, Year of construction: 2001, This machine is fitted with a new Siemens PLC and touch panel. Technical specifications: Chedpfx Aextakmjnuod - Manufacturer: Unisanding - Model: 2.2.0. 0-30 - Working width: 1300 mm - Year of manufacture: 2001, retrofitted in 2025 - 2 rollers, flexibly adjustable from 0–30°, operating from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass panel on the operator side - Sanding motors: 2 × 2.2 kW with thermal cut-out - Feed motor: 1 × 1.5 kW with thermal cut-out - Vacuum motor: 1 × 5.5 kW - Roller height adjustment axis: 1 × 0.18 kW - Feed speed: 2–10 m/min, frequency-controlled - Brush speed: 50–350 rpm, frequency-controlled - Voltage: 3 x 400 V, 50 Hz - Electrical power rating: 15 kW - Fuse: 63 A - Exhaust air volume (vacuum): 3,000 m³/h - Dust extraction volume: 5,000 m³/h (to be provided by the customer) - Length: 2,170 mm - Width: 2,040 mm - Height: 2,030 mm - Weight including control cabinet: 2,220 kg - Colour: RAL 7035 light grey/black - Operating side: left/right - Brush replacement side: right - Explosion-proof version: No - Location: at the Blomberg warehouse

Condition: new, width of the strips 200 mm band length 1490 mm band speed 8.0 m/sec motor 400 Volt loading area 500 x 280 mm total power requirement 1.5 kW Dimensions (HxWxD) 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor Chodexaapvopfx Anusd - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 66.0 kg range L-W-H 1080 x 440 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Csdpfoxabtisx Anujhd Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, width of the strips 150 mm band length 2000 mm band speed 29.0 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight of the machine ca. 84.0 kg range L-W-H 1080 x 520 x 1000 mm Description : - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop Codpfx Asxabkzsnujhd - Dust extraction nozzle - Separate off button - underframe

Condition: new, Number of sanding units 2 St. sanding width 100,150 mm Sanding height max. , B Roba Twin Flat ----- Bench-mounted brush belt sanding unit for fine wood sanding and intermediate lacquer sanding. The machine utilizes two brush belt sanding units, with the sanding mechanism of the right and left units each facing outwards. This prevents—particularly during intermediate lacquer sanding— the risk of sanding through the edges. Two support rollers are located between the two units, facilitating the handling of long workpieces. Machine configuration: 1 Welded steel base frame 1 Work table – dimensions: 3100 mm x 600 mm x 850 mm 2 Brush belt sanding units Two sanding zones, each featuring 122 sanding segments that are easily replaceable via a plug-in system. Available abrasive trim heights: 30 / 45 / 60 / 75 mm (Machine supplied with initial abrasive setup according to customer specifications) Drive via geared motor: 2 x 1.1 kW Working width of sanding zone 1: 100 mm Working width of sanding zone 2: 150 mm Cedpfxezqvnvo Anuehd Working length of sanding belt: approx. 2 x 1150 mm Sanding zone integrated into the table. Sanding belt speed: 60 m/min – 230 m/min, electronically continuously variable. Extraction ports: 3 x 100 mm Equipment features: Central control and switch cabinet IP 54 rated. Electrical components: Klöckner Möller Geared motors: Getriebebau Nord Frequency converters: Schneider Electric Connected load: 3.0 kW Operating voltage: 230/400 V, 50 Hz, 3-phase/N Machine finish: RAL 7035 / RAL 5018 Standards: CE mark Working range: max. 100 mm / 150 mm Working height: 850 mm +/- 50 mm Machine length: approx. 3100 mm Machine width: approx. 600 mm Machine weight: approx. 400 kg Plus pallet for truck transport (Twin Flat): 175.00 EUR plus VAT OPTION Roba Twin Flat FR (for sashes that are already pressed): ----- See the last 3 images; price on request! (Technical data per manufacturer – subject to change/no liability assumed)

Condition: good (used), Year of construction: 1999, functionality: fully functional, Volpato LVO 120 edge grinder SN 1929112 Year of manufacture 1999 Manufacturer: LASM Volpato Italy Chjdpfx Anovwdqcousd Small single-sided grinding center VOLPATO offers the LVO 120 grinding machine, with combined function that can make life easier for many professionals in the industry. It was developed under the direction of experienced company staff, who work with passion to achieve the best possible result. Vertical oscillating grinder 2.2 kW motor (3 HP) Swivel table 0-90 degrees Work table dim. 880 x 370 mm. Mechanically swiveling Additional support and "round" grinding wheels Belt dimensions 150 x 2580 mm. Suction device Weight 250 kg Overall dimensions: 700 x 1000 x 1150 mm. CE marking Technical data may change

Condition: excellent (used), Year of construction: 2023, width of the strips 75.0 mm band length 2000 mm band speed 30.0 m/sek grinding width 500 Plantisch mm suction capacity 630 m³/h total power requirement 3.75 kW weight of the machine ca. 90.0 kg range L-W-H 1100 x 550 x 1035 mm current new price incl. accessories approx. 2.500 euros incl. replacement sanding belts special price on request Equipment : - High quality construction - Drive roller is crowned - This means that the sanding belt is automatically centered on the roller - Fully vulcanized contact roller for maximum service life and smooth running - Tool-free and therefore quick, uncomplicated change of the sanding belt - Stepless height adjustment - for optimum adjustment of the belt sander to the user - Freely adjustable metal fence - for optimum and safe guidance of workpieces when Use of the large surface sanding area - Belt speed optimized by design - to prevent the workpiece from burning during processing can be excluded as far as possible - Suction unit equipped with robust and flexible suction hoses - Motor protection switch with CEE collar connector incl. phase inverter Chsdpfx Ajy Erxvonuod - Motor brake - Incl. sanding belt grain 60 - Dust bag

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 67.0 kg range L-W-H 1080 x 440 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for Cedpfsxaarqsx Anujhd cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, Number of sanding units 4 St. sanding width 190 mm Sanding height max. 180 mm LÖWER-DoubleSander Solid DSM 2004 ----- Double-sided four-belt single wood sander for Sanding solid wood such as window frames etc. Highly stable top design with innovative details. Suitable for high continuous loads even with higher chip removals. - sanding units arranged one after the other for pre-grinding, Fine sanding and finishing sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Directly driven grinding rollers for slip-free Power transmission - maintenance and wear-free CERMET-coated grinding wheels shoes with very good thermal conductivity and absolute Dimensional accuracy - External cooling of the grinding zones for cooler grinding and longer sanding belt service life - force-guided pneumatically controlled sanding belt oscillation - effective sanding dust extraction directly on the Grinding rollers - Airborne dust extraction on the tension rollers - Integrated brushing and finishing device with large Grinding dust extraction - motorized grinding thickness adjustment via precision threaded spindles and large-sized linear ball screws bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of the chip removal at the bottom via precision Threaded spindle with dimension display via scale ring (Resolution 0.1mm) - Sanding belt tension via pneumatic cylinder constant clamping pressure - Sanding belt change with pneumatic belt relaxation Within seconds - Adjustment option for the sanding belt run Band change - electro-pneumatic compressed air monitoring - Anti-running protection via contact roller if it is too thick workpieces - Workpiece transport via calibrated non-slip and non-stick fixed conveyor belts over heavy, cast tables Finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and consistent Workpiece transport - Feed gear motor with stepless speed 4-20 m/min - all motors electrically protected - ergonomically arranged controls - digital thickness display (resolution 0.1mm) with modern Magnetic tape system Technical data: - Sanding belt speed 22 m/s - Sanding belt length 1800mm - Sanding belt width 200mm - Working width 190mm - Grinding thickness 2-180mm - four brake motors for 5.5 kW drive - Feed motor 1.5 kW - Feed speed 4-20 m/min. - automatic height adjustment 0.37 kW - two brush units with fiber brushes D 120 x 200mm at 0.37 kW - Suction nozzle 2 x 180mm 2 x 120mm - Extraction air speed 20 m/s - Pneumatic connection 6 bar - Working height 870mm - Length (with soft disc 2740mm) 2600mm Cjdpfxovnv Tqj Anuehd - Length with control panel (with soft disc 3035mm) 2985mm - Width 880mm - Height 1910mm - Weight approx. 3300 kg - Operating voltage 400 volts, 50 Hz, 3P - CE version ----- Price of the above machine on request! ----- Special accessories with additional charge: Workpiece blow-off - using nozzles from above and below at the machine outlet arranged, pneumatically controlled 4-belt sanding belt blowout via nozzles directly on the radii of the tension rollers inside the suction arranged, timer controlled on/off 5 seconds each, can be switched on separately Di...

Condition: excellent (used), KÜNDIG BASIQ Chjdpfx Aj Agm H Ienusd Single-sided edge sanding machines 1 single-sided sanding unit, standard configuration for sanding solid wood edges, oscillating, manually adjustable in height, tiltable Sanding belt width up to 200 mm Drive motor 2.2 kW

Condition: new, width of the strips 75.0 mm band length 2000 mm band speed 14.5 + 29.0 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3.0 kW 100% ED weight of the machine ca. 72.0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 75 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning Chsdpfsxab Akjx Anujd mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Abrasive belt 75 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

Condition: reconditioned (used), machine/vehicle number: 9958, functionality: fully functional, Power connection: 380V, 7.3 kW Dust extraction: 1x 120 mm, 1x 180 mm Sanding table dimensions: 2850 x 1550 mm Sanding belt dimensions: 7820 x 150 mm Codpjiau Tljfx Anujhd Table height adjustment via handwheel Length x Width x Height: 4400 x 1700 x 1450 mm Weight: approx. 1100 kg

Condition: new, Year of construction: 2026, CORMAK MS2000 Pipe and Profile Belt Grinder is a modern metal belt grinding machine designed for precise and efficient grinding of steel pipes, closed profiles, and flat surfaces. The machine is ideal wherever high processing speed, excellent surface finish, and operator comfort are essential. Thanks to its robust construction, powerful motor, and dust extraction system, the CORMAK MS2000 metal belt grinder is ready for intensive industrial operation. Main advantages of the machine Prismatic clamping jaw system – ensures secure and stable fixing of pipes, profiles, and flat bars. Two-speed belt drive – allows adjustment of the grinding speed (15 or 30 m/s) depending on the material and the stage of processing. Stable machine base – minimizes vibrations, ensuring precision and comfortable operation. Large upper working surface – enables efficient removal of burrs and sharp edges from flat components. Easy access to wear components – quick belt and roller replacement minimizes downtime. Design and technology The stationary CORMAK MS2000 belt grinder has been designed for intensive industrial use. The robust steel construction provides a rigid foundation for all working mechanisms, ensuring exceptional durability and machining accuracy. A 3.3 kW motor drives a 100 mm wide and 2000 mm long abrasive belt. The integrated dust extraction system, including two dust collection containers, enables clean and safe operation for the user. Precision and work efficiency Thanks to the adjustable grinding angle from 30° to 90°, the machine allows precise positioning of the workpiece relative to the belt, which is essential when grinding welds, joints, and edges. The standard grinding roller with a diameter of 42.4 mm provides versatile application possibilities – from precise processing of thin-walled pipes to grinding square profiles. Applications Chsdpovxhv Sofx Anusd The CORMAK MS2000 belt grinder is suitable for: grinding steel, stainless steel, and acid-resistant steel pipes, grinding weld seams and edges of steel structures, finishing surfaces of closed profiles and flat bars, welding workshops, manufacturing plants, and metalworking facilities. Standard equipment Stable machine base Standard abrasive belt 100 × 2000 mm Grinding roller Ø42.4 mm Service tools Technical specifications Parameter Value Power supply 400 V Angle adjustment 30°–90° Belt speeds 15–30 m/s Motor power S6 3.3 kW Abrasive belt dimensions 100 × 2000 mm Machine dimensions 630 × 1430 × 1550 mm Weight 190 kg