Used Belt Press Machine for sale (71,866)

Condition: new, Washing machine WA LC40 with centrifugal mill RM40 for belt presses EBP500, EBP650 and EBP820 capacity up to 2 000 kg/h power: elevator 2,2 kW mill 4,0 (5,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2 000 mm width 700 mm Bjdpfx Amob Ncc Donjdd height 2 400 mm insertion resp. discharge height 800 mm weight 285 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for waste water 2 “ outside mash discharge height 1 500 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen

Condition: new, capacity up to 6 000 kg/h power: elevator 2,2 (3,0) kW (PS) mill 5,5 (7,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 800 mm width 900 mm height 2 450 / 2 700 mm insertion resp. discharge height 800 mm Bdjdpfx Aeb Ncntsmnod weight 420 / 450 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for washing bath 2 “ outside mash discharge height 1 480 mm suitable for pomaceous fruit scope of delivery 7, 9 and 12 mm cutting screen

Condition: new, Year of construction: 2026, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 315 t, stroke length: 800 mm, operating speed: 120 mm/s, reverse speed: 100 mm/s, table width: 1,160 mm, table length: 1,260 mm, table height: 600 mm, ram plate width: 1,160 mm, ram plate length: 1,260 mm, distance table to ram: 1,250 mm, clearance between the columns: 1,160 mm, retraction force: 30 t, oil tank capacity: 510 l, total length: 2,000 mm, total width: 1,250 mm, total height: 3,500 mm, overall weight: 13,000 kg, Equipment: CE marking, documentation/manual, safety light barrier, YQ32-315T Hydraulic Press This series of presses are general-purpose hydraulic presses, widely used in machinery manufacturing, automotive, motor, electrical appliance, light industry and other industries. They are suitable for metal processing procedures including drawing, bending, flanging, cold extrusion and blanking. The machines also perform straightening, press fitting, as well as compression molding of powder products, abrasive products, plastic products and insulating materials. The working pressure, pressing speed and stroke can all be adjusted within the specified parameter range according to process requirements. Equipped with an independent power unit and electrical control system, the press adopts centralized push-button control and supports three operation modes: manual, semi-automatic and automatic. It is available with two pressing modes: pressure setting and stroke setting. Operation Sequence: Motor start → Main cylinder piston rapid no-load downstroke → Low-speed pressurization → Pressure holding (holding time adjustable) → Pressure relief → Slide return stroke → Work stop → Total stop Mainframe The mainframe adopts a vertical three-beam four-column structure, consisting of an upper beam, a slide, and a lower beam connected by four columns, which are fastened with nuts to form a closed rigid frame. All major structural components of the mainframe are fabricated from welded steel plates using CO₂ gas shielded welding. After welding, the entire frame undergoes vibration stress relief to eliminate internal residual stresses. Key components are machined on advanced equipment such as gantry milling machines, large floor-type boring and milling machines, and large precision lathes, ensuring high overall accuracy of the machine. The mainframe is pre-tensioned using hydraulic nuts. The slide is connected to the piston rod of the main cylinder and moves up and down guided by the columns. T-slots are provided on the lower surface of the slide and the upper surface of the movable worktable for die mounting. The columns are made of high-quality 45 carbon steel with hard chrome plating on the surface; the column guide sleeves are made of composite material, offering excellent wear resistance and self-lubricating properties. Bdjdpfx Aoy Uiyvemnod

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 100 t, stroke length: 200 mm, operating speed: 140 mm/s, reverse speed: 130 mm/s, table width: 60 mm, table length: 3,200 mm, table height: 850 mm, throat depth: 500 mm, ram plate width: 50 mm, ram plate length: 3,200 mm, distance table to ram: 460 mm, clearance between the columns: 2,700 mm, retraction force: 10 t, oil tank capacity: 230 l, total length: 3,800 mm, total width: 1,800 mm, total height: 2,750 mm, overall weight: 7,300 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine tool is designed and manufactured with the latest technology, ensuring its strength, rigidity and safety performance. It adopts an integral high-quality steel plate welded structure with a heavy-duty and high-rigidity frame. The machine surface is coated with imported anti-rust primer and topcoat, keeping the equipment in good condition permanently. The machine tool is mainly composed of the frame, upper slide, backgauge system, slide block and synchronous control device, dies, hydraulic system, control system and other components. Product detail display Frame Section It adopts a frame-type structure, consisting of worktable vertical plates, left and right side plates, and connecting beams. It is integrally welded with steel plates, featuring high rigidity, high strength and excellent resistance to torsional deformation. Internal stress is eliminated through processes such as surface shot blasting, ensuring long-term stability of the overall machine precision. During bending, the deformation of the upper slide and worktable is minimal, which guarantees excellent straightness and angular consistency of workpieces. Die and Clamping Device It is composed of upper and lower dies, featuring high precision, premium quality and long service life. The upper die is mounted on the slide block, securely fixed by a precision quick-release clamping device. The lower die adopts a dual-V concentric design, allowing for fast and convenient die changeover, effectively reducing operator labor intensity, and significantly improving overall production efficiency.device. The lower die adopts dual V concentric design, enabling fast and convenient die change, reducing intensity and improving efficiency. Bdsdpfoy Uc Nkjx Amned Throat Opening Deflection Compensation Device A linear encoder is installed on each side of the machine to measure and feed back the precise distance between the slide block and the lower worktable. The encoders are connected to the worktable via C-frames, effectively eliminating the influence of frame throat deformation on the slide block position. Position data is fed back to the CNC system, which outputs signals to control the hydraulic proportional servo valves, ensuring accurate synchronization of the two cylinders. Backgauge System Adopts the latest Belgian-designed backgauge for exceptional precision and stability. Driven by servo motors and ball screws, it delivers high speed and outstanding positioning accuracy. The unique dual linear guide rail structure ensures excellent long-term repeatability. Multi-stage positioning expands the working range, offering superior value for investment. Modular design allows axis configuration from single-axis X to multi-axis options. Mechanical Compensation Device Adopts an integrated mechanical compensation wedge block, motor-driven for precise adjustment. It automatically fine-tunes the worktable alignment, offsetting deflection caused by bending forces. The system ensures consistent precision along the entire length of the workpiece. It provides reliable, repeatable adjustment, eliminating the need for manual correction, and significantly improving bending accuracy.

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Bjdpfjzdazbox Amnsdd Made in Germany. Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, table length: 3,200 mm, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, overall weight: 8,000 kg, bending force (max.): 1,000 t, bending angle (max.): 90 °, warranty duration: 24 months, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending! Bodsv Hchljpfx Amnsdd

Condition: new, width of the strips 150 mm band length 2000 mm band speed 16,5/33 m/sec total power requirement 2,6/3,37 kW turning speeds 1400/2800 U/min weight of the machine ca. 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt Bjdpfx Ajyv Nb Nemnjdd - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad

Condition: new, Year of construction: 2024, neu 2024 5546 prompt, Zwischenverkauf v Polen 1730 € 1 Bedpfx Amsynmw Densdd 150 mm 2.000 x 150 mm 200 x 150 x 42 ø mm 605 mm 3000 1/min 3.5 kW 1025 mm 600 mm 1000 mm 100 kg Industrial belt grinder with following features: - Separate emergency stop - Motor brake - Standard - Reliable - Simple and practical operation - Easy to adjust - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety

Condition: new, Year of construction: 2024, neu 2024 5544 prompt, Zwischenverkauf v Polen 1370 € 1 75 mm 2.000 x 75 mm 200 x 75 x 42 ø mm Bdsdoynmwwjpfx Amnod 605 mm 3000 1/min 3 kW 1025 mm 500 mm 1000 mm 76 kg Industrial belt grinder with following features: - Separate emergency stop - Motor brake - Standard - Reliable - Simple and practical operation - Easy to adjust - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety

Condition: excellent (used), Catalogue number 7732 TECHNICAL DATA - pressing force: hydraulic - briquette shape: round - briquette diameter: 70mm - tank diameter: 1200mm - output: approx. 70kg/h - fully automatic machine operation - motor: 7.5kW - max working pressure: 150 bar - suction outlet diameter: 90mm - filter bag opening diameter: 500mm - max bag height: 900mm - dimensions (LxWxH): 1950x1400x2700mm - weight: 1130kg Bdsdpozhvaaefx Amnjd ADVANTAGES - Italian-made - direct connection to sawdust extraction possible - used briquetting press - operating & maintenance documentation (DTR) - condition: very good Net price: 29,900 PLN Net price: 7,120 EUR (based on 4.2 EUR exchange rate) (Prices may vary with significant exchange rate fluctuations)

Condition: new, Wide belt sanding machine for calibrating and fine sanding Bodpfsitvkuox Amnsdd Working width mm 1,100 Min/ Max. working height mm 4/ 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Gear motor kW 2.2 Feed speed m/min variable Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning 1st unit Oscillating belt cleaning 2nd unit Oscillating belt cleaning 3rd aggregate 10” touch screen control panel “eye-S” 1. Aggregate steel roller 2. Aggregate rubberized calibrating roller 85SH 3. Aggregate combi-aggregate pneumatic seg. sanding pad /rubberized sanding roller 35 SH Motore power 1st unit kW 18.5 Motor powert 2nd & 3rd aggregate kW 18.5 Version "B" for RRCS with: Pneumatic switching on and off 1st aggregate Pneumatic switching on and off 2nd aggregate Pneumatic switching on and off 3rd aggregate "MESAR" with elastic segmented sanding pad Pneumatic switching on and off of the sanding pad unit electronic adjustment of the working height SPECIAL PRICE! IMMEDIATELY AVAILABLE

Condition: new, Technical data: Working width mm 1,350 Bodjhtuvropfx Amnedd Min./max. working height mm 4 - 170 Sanding belt width/length mm 1,370/2,620 Main motor power kW 18.5 with inverter Feed speed, variable m/min 3.5 - 18 Working units: 1. Unit: "RA" diagonally ribbed contact roller, Sh 86, diameter 160 mm 2. Unit: Combi: rubber-coated sanding roller, diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad "MESAR" with 24 segments Version C: - Elastic electronic segmented sanding pad "MESAR" complete with: - Pneumatic cylinder (on/off) for the automatic raising and lowering of the sanding roller/sanding pad unit - Activation of the sectors via the electronic control system, which synchronizes their engagement with the feed speed and controls the number based on the workpiece geometry, and enables the selection of more or fewer sectors to the left and right of the workpiece. Version 135: "MESAR 24" with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at the infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with electric fan 4 kW (5.5 hp) integrated into the machine frame Oscillating blow-off device, 2nd unit Touch screen 10.4" display with 'eye S software integration' ATTENTION: IMAGES are EXAMPLE IMAGES of a SIMILAR SD70!

Condition: new, DMC SD 90 RCS 135 "C-Plus" version Technical specifications: Useful working width mm 1350 min/max Working height (with fixed table) mm 4 – 200 Abrasive belts mm 1,370 x 2,620 Feed speed m/min 3.5-18 working aggregates: “MESAR 46” 46 sectors (30 mm) flexible electronic link sanding pad complete with B/46 workpiece sensing bar in the infeed • 1st position: "RA" diagonally ribbed steel contact roller D=250 • 2nd position: COMBI with rubber-coated grinding roller D=175 mm 65 Sh • Floating pressure shoe in 1st position with pneumatic adjustment • 2 grooved rubber coated pressure rollers 2nd and 3rd position • Oscillating blow-off device 1st and 2nd unit • Workpiece cleaning unit with rotating blast nozzles • Motor 1st unit 18.5 kW • Motor 2 with inverter 15 kW Table: • Fixed table working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and transport carpet 50 Sh • Vacuum table with 4 kW electric fan integrated in the machine frame • Stepless carpet feed from 3.5-18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit "Pro-Sand" • Touch screen 10.4" screen • Door with viewing window on set-up side for machine with 2 working units • LED interior lighting Bsdjd E Ixzepfx Amnjdd Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Manufacturer: Kuderer Maschinenbau GmbH Model: AZ-2 Year: 1992 Belt Grinder Overall dimensions: 1000 x 440 x 1080 mm Belt size: 150 x 1440 mm Bodpfx Asy N Nw Rjmnodd Power: 1.5 kW Extractor Overall dimensions: 560 x 560 x 690 mm

Condition: like new (used), Year of construction: 2020, For sale: HOUFEK BASSET PBH220 belt grinding machine. The machine is practically unused and in very good condition. It features a robust industrial design, intended for grinding, smoothing, and finishing metal surfaces. The HOUFEK machine, manufactured in the Czech Republic, is characterized by a large work table, a long grinding belt, and precise work table adjustment, making it ideally suited for processing both individual parts and larger structures. Technical specifications: Manufacturer: HOUFEK a.s. Model: BASSET PBH220 Year of manufacture: 2020 Made in: Czech Republic Bdedpfezff R Njx Amnsd Motor power: 3 kW Grinding belt speed: 17 m/s Vertical work table travel: 540 mm Horizontal work table travel: 700 mm Work table dimensions: 800 × 2200 mm Grinding belt dimensions: 150 × 6400 mm Dust extraction connections: 2 × 100 mm Power supply: 3/N/PE 400 V, 50 Hz Motor speed: 1400 rpm Nominal current: 7 A Protection class: IP54 Weight: 544 kg Advantages: Practically unused Large work table Robust and stable frame Adjustable work table High grinding performance Simple operation Suitable for intensive industrial use Application: Perfectly suited for grinding and finishing metal structures, stainless steel products, welded structures, sheet metal parts, and other metal products. If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 1999, Used machine Bsdpfxjzh Ruls Amnodd Year of manufacture: 1999 Equipment and technical data: Can be used as a surface and edge grinding machine Table size: approx. 2500 mm Table width: 700 mm Vertical adjustment of the table: 600 mm Cross adjustment of the table: 600 mm Grinding belt length: 6650 mm Grinding belt width: 150 mm Dust extraction port, left: 125 mm Dust extraction port, right: 100 mm Motor: 2.2/3 kW Dimensions L x W x H: 3560 x 1280 x 1690 mm Weight: approx. 490 kg Availability: short notice Location: 63934 Röllbach

Condition: good (used), Year of construction: 1997, Table size/sanding length: 200 x 400 mm Sanding belt dimensions: 200 x approx. 1500 mm 2 belt speeds via pole-reversing motor: 8/16 m/s Drive motor: 380 V, 1.8/2.2 kW Bjdpszh H Rvefx Amnedd Weight: 145 kg Space required: 1000 x 750 x 1100 mm

Condition: used, Year of construction: 2019, Overview This belt press was manufactured in 2019 by SRAML. Bdedjyw Aa Ijpfx Amnsd The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  - Capacity: 1,500 kg/h (apples) - Application: Juice extraction from crushed apples - Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system - Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems

Condition: used, Year of construction: 2021, Overview Bdjdpfx Amjzh Il Ijnjd This belt press was manufactured in 2021 by Germany AMOS INDUSTRIE. The machine is designed for fruit juice processing. It is still installed and can be visited in production on request.  Technical data  - Capacity: 1,200 kg/hour - Application: Fruit juice - Configuration: Belt press - Operating hours: 200

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 2MAZL000283, power of the servo motor: 350 W, input voltage: 230 V, clearance between the columns: 70 mm, type of input current: AC, throat depth: 120 mm, feed length X-axis: 22 mm, feed length Y-axis: 78 mm, feed length Z-axis: 10 mm, pneumatic connection: 6 bar, JUKI MOL-254 – Automatic Belt Loop Attaching Machine High-Speed Denim Production Unit – Video Verified (03/2026) Description For sale is a JUKI MOL-254 automatic belt loop attaching machine, designed for fully automated production of belt loops in jeans, trousers and workwear. This is a specialized high-speed production unit, not a standard sewing machine. The machine automatically feeds, cuts, positions and bartacks belt loops with consistent precision and strength. The unit has been used in a professional garment production environment and is offered as a complete industrial workstation. Video recorded in operation on 05.03.2026 Serviced on 27.02.2026 Production-ready condition Production performance Cycle time approx. 1.2 seconds per loop Up to 2,000–2,500 belt loops per shift Simultaneous top and bottom bartacking Consistent symmetry and reinforcement quality Key features Fully automatic belt loop feeding, cutting and attaching Integrated bartack stitching system Pneumatic material handling system Digital JUKI control panel Adjustable loop size settings Stable performance on heavy fabrics such as denim and workwear Designed for continuous industrial use Includes JUKI MOL-254 machine unit Integrated motor and drive system Pneumatic system Industrial table and stand Operator control panel Thread stand Technical details Manufacturer: JUKI, Japan Model: MOL-254 Type: Automatic belt loop attaching machine Control: Electronic JUKI control system Drive: Industrial motor with pneumatic system Application: Belt loop production Condition Used industrial production condition Fully functional Serviced 27.02.2026 Video proof available Typical signs of use from factory environment Sold as-is, where-is, without warranty Applications Bedpoy Nd Hgsfx Amnedd Jeans manufacturing Workwear production Trousers production Automated garment production lines Location Valga, Estonia Logistics Buyer responsible for dismantling and transport

Condition: used, Year of construction: 2005, - Manufacturer: Cefa - Type: KLEENSPRAY - Year of manufacture: 2005 - Working width: 1,200 mm - Working height: 900 mm + - 20 mm - Operating side: right - Price for reconditioned machine Bdjdoxnbhvepfx Amned - Gun drive: Duo version - Height-adjustable sprayers - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity ~ 6,500 m³/h - Paper belt transport system - Feed speed continuously adjustable 1.5 - 7 m/min - PLC control with touch screen - Number of sprayers installed 0 - Number of paint pumps 0 - Suitable for solvent-based paints - Suitable for water-based paints - Length 4.300 mm - Width 3.360 mm + 1.850 mm - Height 2.700 mm - Total connection ~ 7.1 kW / 28.6 A - Volts, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with a quote for assembly and commissioning of the system, as well as training for employees. On request, we also offer regular maintenance and servicing of the machine. For further information, please contact us!

Condition: used, Year of construction: 2005, machine/vehicle number: A41213AC1, Technische Daten: - Hersteller: Costa - Typ.: SA TS 1350 - Baujahr: 2005 - Arbeitsbreite: 1.350 mm - Schleifbandmaß: 2.620 x 1.380mm - Schleifhöhen: 3-160m - Vorschubgeschwindigkeit: 5 -25m/min. - 1. Aggregat: - Längschleifaggragat - Bandmaße: 2620 x 1380mm - Elektronischer Schleifschuh, System Costa - Tastrollenabstand: 32mm - Segmentbreite: 32mm - Motorleistung Antrieb, 11kW - Entstauberbürste Durchmesser: 180mm - Bedienseite: links - Höhenverstellung: motorisch - Vakuum Transportband - Gesamtanschluß 20KW / 43A - Breite: 1.924mm - Länge: 2.059mm - Höhe: 2.185 - 2.375mm - Absaugstutzen: D 2x100mm + 2x160mm - Volumenstrom: 4.830m³/h bei 24m/s - Druckluft: 6bar, 880NL/min. - Volt, Hz 400 / 50 - Spannungsschwankungen max. +/- 5 % - Gewicht 3.100kg - Standort, am Lager Blomberg Bdedox Ex Tmepfx Amnjd

Condition: used, Belt sanding machine BÜRKLE BSU 2500/800 - used - Sanding belt cover, Extraction fan ----- Technical data ----- Table size: 2,500 x 800 mm, Motor: 5.5 kW, Sanding belt dimensions (LxW): 7,200 mm Bdodpfx Aoxlt Ebjmnod

Condition: excellent (used), Belt grinding machine HOLZKRAFT LBSM 2505 - used - Grinding belt cover, Right-/left-hand rotation, Swiveling grinding unit ----- Technical data ----- Table size: 2,400 x 800 mm, Throat depth: 650 mm, Motor: 3 kW, Grinding belt dimensions (LxW): 150 x 6,400 mm Bedpfoyfwcrox Amnedd Quality information: - Belt tracking checked - Grinding shoe checked - Height adjustment checked - Grinding table guide checked - Complete basic cleaning performed - Electrical system checked - Immediately ready for operation

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- Bdjdpfx Aju R Sxxomnjd ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -