Used Long Hole for sale (9,132)

Condition: good (used), functionality: fully functional, mileage: 67,003 km, power: 106 kW (144.12 HP), fuel type: diesel, gearing type: mechanical, overall weight: 2,790 kg, empty load weight: 1,840 kg, maximum load weight: 950 kg, first registration: 05/2024, next inspection (TÜV): 02/2028, loading space length: 2,800 mm, loading space width: 1,260 mm, loading space height: 1,300 mm, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Equipment: ABS, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, truck registration, Special equipment: Driving Assistance Package: Drive Assist, wooden floor in the loading area and side paneling in standard version Ffedpfx Asymzbbjdaew Additional features: Driver and passenger airbags, audio controls on the steering wheel, multimedia audio system, electrically adjustable and heated exterior mirrors, flooring: luggage/load area floor (rubber), onboard computer, brake assist, DAB tuner (digital radio reception), front double bench seat with storage compartment, automatic headlights activation, driver assistance system: automatic light control including high beam assist, driver assistance system: autonomous emergency braking assist, driver assistance system: hill start assist (HSA), driver assistance system: high beam assist, driver assistance system: fatigue detection sensor, driver assistance system: emergency braking assist, driver assistance system: safety system with automatic emergency call (ERA GLONASS / eCall), driver assistance system: lane departure warning, driver assistance system: traffic sign recognition, vehicle keys (2), both folding, electric front windows with pinch protection, rear wing doors without glazing, bodywork: panel van, body variant: vehicle length L3, solid bulkhead, lumbar support for front left seat, adjustable steering column (steering wheel), headlight range control, model update, engine 2.0 L - 106 kW diesel, rear park assist system, wheelbase 3275 mm, tire repair kit, tire pressure monitoring system, low emission according to Euro 6e standard, interval wiper system, halogen headlights, sliding door on the right, SCR system (AdBlue technology), visibility package, manually adjustable front right seat, seat upholstery: fabric, steel rims 7x16, start/stop system, 12V socket in luggage/load area, 12V socket in center console, lashing rings in load area, seat belt warning system, passenger side, seat belt warning system, driver side

Condition: used, Morbidelli line boring machine, price Ex Works. Fsdpfx Adsxp Hxcsaefw

Condition: new, Catalog number: O222 ADVANTAGES – grinding length 2600mm – electric table height adjustment – new machine – warranty – CE certificate TECHNICAL DATA table size 2600x800mm table lift 570mm pulley 250mm electric table height adjustment 0.37kW belt speed 18m/sec sanding belt size 120 x 150mm belt length 7050mm engine 3kW exhaust port diameter 120mm weight 400kg PRODUCT FEATURES The Optimat SD 260 long belt sander has been designed for processing smaller and medium-sized elements. The electrically controlled table certainly increases the precision and efficiency of work. Ffsdpfxsx S Il Eo Adajw Standard equipment: Electric table height adjustment Extraction nozzle User manual Automatic engine braking Protections compliant with standards Ergonomic emergency switch Electronic table stops Net price: PLN 21,000 Net price: EUR 5,000 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), Catalog number 7838 TECHNICAL DATA - Machining length: 2760 mm - Machining width: 800 mm Ffedpsx N Tnyefx Adaow - Main motor: 4 kW - Sanding belt width: 150 mm - Right/left rotation - Electric table adjustment up/down 0.15 kW - Extraction port diameter: 135 mm, 120 mm - Overall dimensions (L/W/H): 4120x1600x1400 mm - Weight: 500 kg ADVANTAGES – Not repainted – Electric table adjustment – Used sander, in perfect condition, very little use Net price: 8,900 PLN Net price: 2,120 EUR based on a rate of 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Ffjdpjwcldasfx Adasw Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

Condition: refurbished (used), Year of construction: 2019, TECHNICAL DETAILS Drilling depth: 1,400 mm Full drilling range: 40 mm Spindle speed: 670 - 3,560 rpm Center height over bed: 380 mm Center height over floor: 1,400 mm Table length: 1,200 mm Table width: 1,200 mm Cross table travel: 2 x 400 mm Center height over table: 250 – 600 mm Z-axis Feed rate: 0-7,000 mm/min W-axis - 400 mm Feed rate: 0-7,000 mm/min Ffjdpfsw Ekfusx Adasw X-axis - 800 mm Feed rate: 0-2,000 mm/min Y-axis - 350 mm Feed rate: 0-3,000 mm/min Rapid traverse speed: 3.5 m/min Motor nominal speed: 8,000 rpm Motor rated output: 18.5 kW MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Connected load: 40 kW Total length: 6,500 mm Total width: 3,500 mm Total height: 2,900 mm Weight: 8 t EQUIPMENT Manufacturer: Siemens Sinumerik 840 Dsl Including 1,700 l coolant system 20 solid carbide single-lip drills, diameters 6 mm to 20 mm, lengths 1,200 mm to 1,750 mm

Condition: used, Year of construction: 1987, Wide belt sander Manufacturer: Samco Fsdpfx Adexdnrgoaofw Model: EG Year of manufacture: 1987 Sanding length: 3,000 mm Including spare belts ä24226

Condition: excellent (used), functionality: fully functional, SAMCO Long Belt Sander Working width 2800 mm Working height electrically adjustable Two sanding belt speeds Main motor power 2.25/3 kW Fjdpfx Adoyiti Asaefw

Condition: excellent (used), 2-hole flange bearing -Type: 01CJT05 -Designation/Type: Flange bearing unit -d = Inside: 25 Price: per piece Fodpfxsb A S Hme Adaofw -Number: 71x available -Weight: 0.6 kg/piece

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231494, FANUC, high-performance computer series 31i-B5, Well maintained, approx. 9,000 operating hours Technical Main Data Working Range Max. bar diameter: 38 mm Max. machining length (with guide bushing): approx. 320 mm Machining without guide bushing possible (for shorter workpieces) Max. collet diameter at sub spindle: 38 mm Main Spindle Spindle power: approx. 11–15 kW Max. speed: approx. 7,000 rpm Integrated C-axis (0.001° resolution) High-precision spindle bearings for heavy-duty machining Sub Spindle Power: approx. 5.5–7.5 kW Max. speed: approx. 7,000 rpm Full-function C-axis Part transfer and rear machining in one setup Axis Configuration X1 / Z1 (main system) X2 / Z2 (sub spindle system) Y-axis for off-center milling operations C-axis on main and sub spindle Optional B-axis type swivel functions (depending on equipment) Multi-channel control enables simultaneous machining on main and sub spindle for significantly reduced cycle times. Tooling Ffodpfx Aoymmkbsdasw Tool holder set (non-driven) Guide bushing unit (pull system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit), type Müller combistream CS 3 Coolant: oil Weight: 6.25 t Dimensions (LxWxH): 3477x1860x1865 mm The machine can be inspected under power by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Ffsdpfxewkir Dj Adajw Storage location: Nattheim

Condition: used, Year of construction: 2013, Alberti Vector B/CN is a vertical coordinate borer designed for precise drilling and machining of flat materials. The machine features continuous workpiece feed with automatic loading and positioning along the axis. Thanks to its monolithic steel construction and four-axis control, it offers high rigidity, stability, and accuracy even under demanding operating conditions. Optimized work cycles enable efficient drilling, milling, and handling of the workpiece. The combination of multiple spindles, independent vertical units, and the option to use a saw makes this machine a versatile solution for the furniture and woodworking industries. Technical Data Max. workpiece dimensions: 3200 × 1200 mm Min. workpiece dimensions: 300 × 130 mm Processable thickness: 10–60 mm Max. programmable speed (X/Y/Z): 100 / 45 / 12 m/min Axis positioning tolerance: ± 0.1 mm Spindle motors: 2 × 1.5 kW Spindle speed: 3800 rpm Independent vertical spindles: 30 units, 32 mm pitch Saw motor (Ø 125 mm): 1.33 kW Saw inverter: 7.5 kW – 1000 ÷ 18000 rpm Electrospindle motor: 6.7 kW Electrospindle speed: 9000 ÷ 18000 rpm Max. tool diameter: 60 mm Max. required power: 10 kW Operating pressure: 6–7 bar Air consumption: 100 Nl/min Exhaust air speed: 30 m/s Chip extraction capacity: 5000 m³/h Ffodpoxgfg Tsfx Adaow Total machine weight: 3500 kg Central unit weight: 350 kg Dimensions (L × W × H): 5600 × 2110 × 2200 mm

Condition: good (used), power: 202 kW (274.64 HP), fuel type: diesel, color: yellow, Year of construction: 2018, operating hours: 7,665 h, Equipment: air conditioning, Technical information Track width: 85 cm Empty weight: 41.300 kg Ffodpfeynrl Tsx Adaow Drivetrain AdBlue system: Yes Drive: Track Make of engine: SAA6D114E-6 Functional CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: KMTPC256TJKK70443 Other information Dipper / stick length: 600 cm Emission level: Stage IV / Tier IV final Delivery terms: EXW Transport dimensions (LxWxH): 15,1x3,45x3,65 Production country: UK Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information

Condition: good (used), mileage: 53 km, power: 100 kW (135.96 HP), first registration: 06/2023, fuel type: electric, tire size: 215/60R17, axle configuration: 4x2, wheelbase: 3,280 mm, fuel: electricity, color: grey, driver cabin: day cab, gearing type: automatic, number of seats: 2, total length: 5,250 mm, total width: 1,850 mm, total height: 1,960 mm, loading space length: 2,600 mm, loading space width: 1,590 mm, loading space height: 1,310 mm, Year of construction: 2023, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, = Additional Options and Accessories = - Heated mirrors - Bluetooth - None - Manual - Radio/cassette - Rearview camera - Fabric - Partition wall - Xenon lamp = Notes = Configuration: 4x2, Payload: 1,029 kg, Kerb weight: 2,016 kg, Gross weight: 3,045 kg, Unbraked towing capacity: 750 kg, Braked center axle towing capacity: 1,000 kg, Cabin type: Single cab, Cruise control, Air conditioning, Number of airbags: 4, Rear wiper, Parking assistance: rear, Electric windows, Electric mirrors, Partition wall, Radio/cassette, Carplay, GPS navigation, Color: grey, metallic, Heated mirrors, Rearview camera, Lighting type: xenon lamp, Climate control, Seat heating, Bluetooth, Engine output: 100 kW (134 hp), Fuel type: electric, Transmission type: automatic, Power steering, ABS, ASR, Starter battery, Body type: extended, Roof rack: none, Side doors: 1, Side windows: 2, Rear lock: double door, Central locking, Seats: 2, Seat configuration: 1+1, Upholstery: fabric, Seat adjustment: manual, 75 kWh long range AC automatic camera 360 cruise control, Tire type: summer tires = Further Information = General Information Number of doors: 1 Registration number: VXD-91-F Axle Configuration Tire size: 215/60R17 Brakes: disc brakes Suspension: coil springs Axle 1: tire tread left: 8 mm; tire tread right: 8 mm Fodpox Raxnefx Adaofw Axle 2: tire tread left: 9 mm; tire tread right: 9 mm Weights Unladen weight: 2,016 kg Payload: 1,029 kg gross vehicle weight (GVW): 3,045 kg Functional Loading platform height: 64 cm Maintenance APK (Technical inspection): valid until 06.2027 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Leasing price: €417 per month (panel van, 72 months); Please inquire for further details and conditions

Condition: excellent (used), functionality: fully functional, mileage: 1,58,039 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,682 mm, overall weight: 3,500 kg, empty load weight: 2,135 kg, maximum load weight: 1,365 kg, first registration: 07/2020, next inspection (TÜV): 03/2028, loading space length: 3,000 mm, loading space width: 1,500 mm, loading space height: 1,800 mm, fuel tank capacity: 105 l, emission class: euro6, color: white, tire size: 225/65R16C M+S, number of seats: 3, number of previous owners: 1, total length: 5,548 mm, total width: 2,070 mm, total height: 2,482 mm, tire condition: 75 %, fuel: diesel, number of gears: 6, Equipment: ABS, AdBlue, USB port, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), full service history, immobilizer system, onboard computer, parking sensors, power assisted steering, power mirror, seat heater, sliding door, soot filter, traction control, truck registration, winter tires, Very clean, exceptionally well-maintained, accident-free lease return with premium special equipment from first owner, non-smoking vehicle, Opel Movano B panel van L2H2, Euro 6 with truck registration, Sortimo cargo area package with triple LED lighting, rear parking sensors, cruise control, 3-seater with Multiflex front double passenger seat, driver’s comfort suspension seat with center armrest, pneumatic lumbar support adjustment and integrated seat heating, and much more. Electronic ABS Overhead storage above windshield Dual airbags Electrically adjustable and heated exterior mirrors Solid side panel without window, driver's side On-board computer Tachometer ESP and ASR Electric front windows 6-speed manual transmission 3-point safety belts in front Height-adjustable headrests (3) Solid color paint Cargo area: sliding door on right LED cargo area lighting Sortimo washable cargo floor Sowaflex washable, side wall paneling up to roof height Height-adjustable steering column Cloth upholstery Quickheat rapid heating system Radio 15 USB Tire repair kit Diesel particulate filter with SCR Euro 6 Wheels: steel rims 6.5 J x 16 Side wind assist Power steering Visibility package Multifunction double passenger seat with storage compartment Comfortable driver suspension seat with center armrest, seat heating, and pneumatic lumbar adjustment 12V socket in front LED daytime running lights Blind spot mirror in passenger sun visor Solid partition wall Cargo area tie-down points Additional lashing eyes on load floor Immobilizer Green-tinted heat-insulating windows Central locking with remote control Rear wing doors, 270°, solid panels Speed limiter Air conditioning with pollen filter ParkPilot 12V socket in cargo area Rear step integrated into bumper Side lashing points in cargo area Cargo area (L/W/H): 3.00/1.50/1.80 m Photos to follow. Fully serviced by authorized Opel dealer with complete service history. Last service conducted 07/2024 at 123,851 km. Front axle brake discs and pads as new, rear axle brake pads and battery new. New general inspection (HU/AU) upon sale. Vehicle available immediately. Fjdpfx Asytp Tljdaefw For questions, please contact us by phone. This vehicle description is intended solely to describe the vehicle and does not constitute any form of warranty under sales law. Details on equipment are given without guarantee; subject to changes, prior sale, or mistakes. We are a member of the Association of Independent Motor Vehicle Dealers (BVfK) and bear the BVfK quality seal!

Condition: ready for operation (used), functionality: fully functional, mileage: 1,26,741 km, power: 115 kW (156.36 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,550 mm, overall weight: 3,500 kg, empty load weight: 2,374 kg, maximum load weight: 1,126 kg, first registration: 03/2022, next inspection (TÜV): 11/2027, loading space length: 2,400 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, loading space volume: 8 m³, emission class: euro6, color: white, driver cabin: day cab, suspension: steel, tire size: 225/65 R 16, number of seats: 5, Year of construction: 2021, tire condition: 60 %, fuel: diesel, machine/vehicle number: ZCFC735B105439580, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fog lights, onboard computer, power assisted steering, power mirror, sliding door, soot filter, traction control, our vehicle number: # 30674 Iveco Daily 35 S 16 A8 V Double Cab 5 seats Partition wall with window Euro 6 Wheelbase: 3,550 mm Cargo length: 2,400 mm Tyres: 225/65 R 16 C approx. 60% Automatic transmission: HiMatic ABS Cruise control Air conditioning Right sliding door Rear doors 270° opening Rear entrance step Cargo compartment interior lighting 3 pairs of lashing eyes 2 floor-mounted lashing rails 1 lashing rail each side Reversing camera electric windows, dual Ffsdpsx Ifarjfx Adasw Electrically adjustable/heated exterior mirrors Iveco infotainment radio DAB Leather multifunction steering wheel On-board computer City Brake LED daytime running lights Cornering lights LED fog lights Central locking with remote control Lease-purchase or financing also available upon request!

Condition: used, functionality: fully functional, Year of construction: 2001, Thalmann THAKO 15 Working width: 6.20 m Bending capacity: 1.5 mm Year of manufacture: 2001 Incl. controlled back gauge Incl. motorized cutting unit Fjdpfeyr Eqqsx Adaefw Available from end of April 2026

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: Syst.no. 105, Used roller conveyor from the manufacturer Mannesmann Demag 3m straight pieces, come from a 2-story transport system. 1 piece 3m long; Negotiable price for larger purchase quantities!! Ffedowliuzspfx Adasw Other parts also available, please ask.

Condition: repair required (used), Year of construction: 1996, For sale is an IXION TL 601 deep hole drilling machine. Unfortunately, the machine is experiencing electrical problems. Constants need to be reset by a technician, and the backup battery needs to be replaced. New LCD display was recently installed. New LED display. Machine No. 950192 Year of manufacture 1996 Manufacturer: Maschinenfabrik IXION Otto Hafner -Travel paths + Quill Tl 601 (Z) 600 mm + Vertical drilling unit (Y) 300 mm + Transverse table (Table surface 1200 mm x 600 mm) (X) 700 mm + In drilling direction (W) 1000 mm -Clamping table + Table surface (standard) 1200 mm x 600 mm + Table load (T1200) 1000 kg -Tool holder + SK 40 holder according to DIN + Pull stud 69871 According to DIN 69872 -AC main spindle drive 3.0 kW + At 100% duty cycle, S1 5.5 kW At 50% duty cycle, S6 7.5 kW +Spindle turning speed Directly programmable 100-4000 rpm Performance: +Drilling capacity in steel 2312 D 32 mm +Tapping M24 -Weight / Dimensions Weight 2500 kg Length approx. 4230 mm Width approx. 1885 mm Height approx. 1870 mm All prices plus VAT We can deliver and commission the machine. All prices plus VAT Machine Purchase / Sale Ffodeh Dpv Rspfx Adajw PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours?

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideally suited for storing heavy long goods such as pipes, profiles, metal rods, steel beams, wooden battens, and sheet material. With a total length of approx. 13.20 meters, a height of approx. 4.00 meters, and cantilever arms of approx. 120 cm, this long goods rack offers high storage capacity across a total of 4 storage levels (foot level plus 3 additional tiers). Each cantilever arm supports up to 500 kg, and each upright can be loaded up to 2,250 kg. The cantilever arms are bolted and their height can be flexibly adjusted in 200 mm increments using the perforation grid. The fully hot-dip galvanized material ensures long-lasting protection for indoor and outdoor use – new stock available from our warehouse in Wietmarschen. PRODUCT DETAILS: - Rack type: Single-sided heavy-duty cantilever rack - Total rack row length: approx. 13.20 m - Overall height: approx. 400 cm - Arm length: approx. 120 cm (made from IPE 80) - Axial distance (upright spacing): approx. 131 cm - Levels: foot level plus 3 storage levels - Load capacity per arm: max. 500 kg (with even load distribution) - Load capacity per upright: max. 2,250 kg (with even load distribution) - Upright profile: IPE 160, approx. 400 cm, incl. base - Upright perforation grid: approx. 20 cm - First perforation above base: approx. 107.5 cm (top of base) - Uppermost pair of holes: approx. 50 cm below upright head (top of upright) - Design: single-sided, bolted cantilever arms - Surface: fully hot-dip galvanized - Availability: New / B-grade return stock available from Wietmarschen warehouse SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made from IPE 160, incl. base, 20 cm perforation grid - 33 x cantilever arms, approx. 120 cm made from IPE 80 (without stoppers) - Incl. all connecting elements - Incl. all required bolts - 1 x load capacity sign Price: €5,660.00 net €6,735.40 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Delivery throughout Germany by our partner hauliers – freight costs depend on postal code - Professional assembly and disassembly by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Ffjdpfxsyr Ngij Adajw Our design department will be happy to prepare a non-binding quote tailored to your requirements. Whether new construction, modification, or expansion – we offer expert advice for your rack configuration. Still haven’t found the right solution? Visit our website for a quick overview of many offers and product variants! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone call. You will find our phone number on our company page. You can reach us by phone Monday to Friday, 8:00 a.m. – 4:00 p.m. Alternatively, send us a message with your name and number, and we will get back to you as soon as possible.

Condition: used, Year of construction: 2024, Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard configuration, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release sequence, including electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic drilling depth extension for end-face drilling. This saves the need to adjust the drilling depth when switching from flat-face to end-face drilling (+10 mm, e.g., with dowel length 35 mm, flat-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill bit changeover. - Easy pivoting of the drilling unit from 0° to 90°, assisted by gas cylinders. - 1 clamping beam movable on Y-axis with 3 pneumatic clamping cylinders, for workpieces up to max. 80 mm height. Ideal fence system consisting of: - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops. - Quick-change system, easily switchable from right to left stop for mirrored drilling of shelves in carcass construction; also suitable for line boring in system 32. - Side stops and position adjustments, as well as drilling height position, via mechanical digital counters on the support table. - Side stops can be easily folded away for fastest set-up change from carcass to frame or line drilling. - Clamping arms for the clamping beam enable line boring positions up to max. 300 mm. - Optimized three-stage tool system. Includes 1 set of dowel drill bits: - 5 carbide dowel bits, Ø 8x77 mm, right - 4 carbide dowel bits, Ø 8x77 mm, left Basic machine Dowel Hole Drilling Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW" complete in standard version, equipped with: - Fully automatic electronic control with pulse operation via foot pedal for clamp-drill-release, electrical skip operation. - Automatic return of the drilling unit after reaching the preset drilling depth. - Automatic extension of drilling depth for end drilling saves the need to adjust depth when switching from flat to end drilling (+10 mm, e.g. for dowel length 35 mm, flat-side depth 14 mm and end-side depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm). Includes 21 quick-change chucks (Ganner system) for easy drill changeover. - Easy pivoting of the drilling unit from 0° to 90°, gas spring assisted. - 1 clamping beam, Y-axis adjustable, with 3 pneumatic clamps for workpieces up to max. 80 mm high. - Ideal stop system comprising: Fjdpfx Aoxnlflsdasfw - 1 stop ruler, 1800 mm, for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, quick-change system, easily switched from right to left for mirrored shelf drilling in carcass constructions, also usable for line boring in system 32. - Side stops and adjustable positions, as well as drill height position, via mechanical digital counters on the support table. - Side stops can be folded away easily for shortest retool time from carcass to frame and line boring operations. - Clamping arms for the clamp beam suitable for line-boring positions up to max. 300 mm. - Three-stage optimized tool system. Extraction funnel, dust tested, Ø 120 mm 1 set for line boring in system.

Condition: new, carrying capacity per cantilever arm: 650 kg, shelf height: 4,000 mm, total length: 4,000 mm, total width: 1,480 mm, load capacity per stand: 1,950 kg, Specifications: - H: approx. 400 cm - D: approx. 148 cm - L: approx. 400 cm - Cantilever arms: approx. 120 cm including 8 cm front deflector - Axis dimension: 130 cm - NEW, immediately available from stock. - 650 kg load capacity per arm - 1950 kg load capacity per upright - Uprights in RAL 7016. - Cantilever arms in RAL 3000 - Arms are hooked in. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) The uprights in this shelving set are prepared for possible conversion to double-sided use free of charge. For the advantages of a hooked cantilever arm, see illustrations. Shelf consists of: - 4 uprights, including base section approx. 400 cm, made of IPE180. - 12 cantilever arms, approx. 120 cm, made of 10 cm x 4 cm profile. - Includes all necessary fasteners and screws. Price: €1,995.00 net €2,374.05 gross You will receive an invoice with VAT. Accessories such as ground anchors, collision protection, etc. can also be purchased from us. Ffjdpeyr Iwgofx Adajw Transport: Delivery is available upon request through our partner shipping company; costs depend on the zip code. Installation: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Our recommendation: Let us know your needs... We are happy to assist you with the implementation of your projects, from planning and ordering to installation.

Condition: good (used), functionality: fully functional, mileage: 69,444 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, empty load weight: 2,240 kg, maximum load weight: 1,260 kg, first registration: 07/2024, next inspection (TÜV): 12/2027, loading space length: 4,070 mm, loading space width: 1,870 mm, loading space height: 1,932 mm, fuel tank capacity: 90 l, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2024, machine/vehicle number: MLX5079, Equipment: ABS, AdBlue, Bluetooth, USB port, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, immobilizer system, lane keeping assist, non-smoking vehicle, onboard computer, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, start-stop system, traction control, truck registration, Rear wing doors (opening angle 260 / 270 degrees) Reinforced rear axle (suspension) Full-size spare wheel (incl. spare wheel holder) Visibility Plus Package Traction control Electrically adjustable exterior mirrors Long exterior mirrors Brake assist Eco package Electronic parking assistance Intelligent speed assistant Emergency brake assist Ffodpfx Ajyi Tgbsdaow Lane keeping assist Traffic sign recognition Front electric windows Cruise control (including speed limiter) DAB (Digital Audio Broadcasting) Acoustic reversing warning system (external warning signal) Engine start/stop system Rearview camera Perm. gross weight 3.50 t

Condition: used, mileage: 1,74,000 km, power: 75 kW (101.97 HP), first registration: 03/2013, fuel type: diesel, overall weight: 2,310 kg, wheelbase: 3,006 mm, next inspection (TÜV): 03/2027, fuel: diesel, gearing type: mechanical, number of gears: 5, emission class: euro5, number of seats: 2, total length: 4,876 mm, total width: 1,794 mm, Equipment: central locking, sliding door, trailer coupling, truck registration, 1st hand, Truck registration, EURO 5, L2 H1, Maxi, Wheelbase 3006 mm, Gross weight 2310 kg, Overall length 4876 mm, Central locking with remote control, Partition wall/grille, 5-speed gearbox, Electric windows, Electrically adjustable and heated exterior mirrors, Fedpfx Aeyqw Ekedajfw Tow bar, German registration Vehicle may have decals/stickers on it. Mileage as per odometer Vehicle is preferably sold to businesses or for export, Private sale reserved Sold without warranty Net price for export Net: 4,000 EUR + (19% VAT) 760 EUR = Gross: 4,760 EUR The above information is non-binding, subject to errors/changes and prior sale! T: 08026/2188

Condition: good (used), Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. Fsdpfx Ajk D Nt Djdaefw -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg