Used Magnetic Plate for sale (13,264)

Condition: good (used), Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Clamping plate: with support ribs -Length: 4480mm -Width: 2490mm -Height: 280mm Nlodeuhr Nvopfx Ahnof -Plate thickness: 15 mm -Plate: with support ribs -Transport dimensions: 4530/2530/H280 mm -Weight: 4400 kg

Condition: used, Inclined plate conveyor with partitions 1200 mm straight section, 2500 mm total length, 900 mm straight lower section Height: 2620 mm, Height to lower metal profile Nljdpfx Aoyuqr Sehnef Net price: 3,000 EUR

Year of construction: 2024, condition: new, Mobile panel transport cart New demo unit, year of manufacture: 2024 - Stacking of panel heights up to 1,600 mm, electrically operated - Tilt angle forward/backward 100°, electrically operated - Head joint rotation angle CW/CCW 180° - Head joint rotation angle: 360° - Load capacity 120 kg - Panel sizes up to 2,100 x 3,200 mm - Total height 2,090 mm - With 6 high-performance suction pads, width adjustable The Mobilifter ML-120 consists of: - A mobile chassis - An electric lifting and tilting system Nljdpfx Aew I Upnohnof - An automatic vacuum unit - A wireless electric control - Weight 170 kg Availability: short notice Location: Flörsheim

Condition: used, Pair of cast iron angle plates Drilling diameter: Ø 27 mm Nlodpfx Aezmw Naohnsf Width: 575 mm Depth: 2000 mm Total height: 4000 mm Unit weight: approx 6 T

Condition: used, Pair of cast iron angle plates Nodpfx Ahozmw I Nsnslf Height: 3000 mm Width: 1000 mm Depth: 1245 mm Weight: 3 T / unit

Year of construction: 2018, condition: as good as new (ex-display), machine/vehicle number: TMA420x280mm, Drum magnet - Magnetic separator in the housing including separating plate, drive and gearbox + high quality stainless steel execution + Separating plate for separation + Shaft bracket in the form of a storage unit + Pillow block units Nodpfx Asdzqxbohnolf Dimensions: L: 420mm B: 280mm H: 380mm Inlet: 365x80mm Drum: Ø 220x400mm

Year of construction: 2016, condition: good (used), Overband plate magnet Version in VA 1.4301 tightly welded 2.000 x 800 x 200mm completely welded housing Nodpsd Dy U Tefx Ahnslf Ring eyelets for suspension

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Nodjd Dzahepfx Ahnjlf Version in VA 1.4301 tightly welded 420 x 250 x 100mm completely welded housing Ring eyelets for suspension

Year of construction: 2021, condition: as good as new (ex-display), Overband plate magnet Nedpfxed Evl Do Ahnslf Version in VA 1.4301 tightly welded 800 x 500 x 180mm completely welded housing Ring eyelets for suspension

Year of construction: 2021, condition: reconditioned (used), Aluminum inclined conveyor belt for shredders 2000mm flat + 2000mm incline Dimensions: approx. 3000 x 420 x 105mm Aluminum construction: Conveyor belt width with corrugated edge PVC conveyor belt Nledpfxjff Hgbe Ahnsf Green conveyor belt, 2-ply, particularly resistant to lateral forces, endlessly welded with stepped joint * antistatic due to threads in the fabric of the running side Drive: Motor approx. 0.55kW, speed 0.3m/sec. * controllable with frequency inverter Connection 220/400V, 50Hz, protection class IP54 Drive, motor control optional

Condition: used, Round magnets with MK 4 mount, D = 140 mm and D = 220 mm Nedpfxozpfg Se Ahnslf

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, actuation type: hydraulic, controller manufacturer: Siemens, controller model: Smart Line, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 180 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, power: 11 kW (14.96 HP), input voltage: 400 V, number of digital displays: 1, warranty duration: 12 months, Equipment: documentation/manual, emergency stop, DIGIMA W12-8x3200 Hydraulic Four-Roll CNC Plate Rolling Machine The DIGIMA W12-8x3200 is a hydraulic four-roll CNC plate rolling machine designed for accurate, repeatable and efficient sheet-metal forming. With a working width of 3200 mm, it is suitable for producing large cylindrical parts, sleeves, pipes, curved sections, housings, tanks and other technical components used in metalworking, steel construction, ventilation, machinery manufacturing and industrial production. The four-roll system provides a major advantage over conventional three-roll machines. The sheet is held securely between the upper and lower rolls, while the two side rolls perform the pre-bending and rolling operations. This arrangement allows both edges of the sheet to be pre-bent without removing and turning the workpiece, reducing handling time and limiting the length of straight sections left at the ends. The result is improved repeatability, higher productivity and more consistent part geometry. Nsdpeznw T Uofx Ahnelf The W12-8x3200 can roll sheet metal up to 8 mm thick and perform pre-bending up to 6 mm. Its 3200 mm working length enables the processing of wide sheets for both one-off jobs and series production. The upper roll has a diameter of 210 mm, the lower roll 190 mm, and the side rolls 180 mm. The minimum rolling diameter is 400 mm, allowing the machine to produce a wide range of cylindrical and curved components. The hydraulic drive ensures smooth, stable movement and reliable clamping force throughout the forming process. The 11 kW motor provides the power required for regular industrial operation, while the rolling speed of 4 m/min supports efficient production without compromising process control. The rigid machine body and carefully arranged roll system help guide the material accurately and reduce unwanted deformation. Computerised CNC control makes the machine convenient to set up and operate. The operator can control roll movements, monitor the forming process and reproduce previously established settings for recurring jobs. This is especially useful in batch production, where the same diameter, radius and dimensions must be achieved repeatedly. The control panel also helps reduce setup time and simplifies everyday machine operation. The operating sequence is straightforward. First, the sheet is inserted and stabilised between the rolls. The side rolls then pre-bend the sheet edges, minimising flat ends. Finally, the material is passed through the roll system until the required tube, sleeve, arc or cylindrical shape is obtained. The machine can also be used for forming conical components by applying a controlled inclination of the rolls. Thanks to its wide working capacity and computer-controlled operation, the machine can be used in flexible workshop production as well as organised manufacturing processes. It is suitable for companies producing ventilation ducts, structural elements, machine covers, tanks, steel sleeves and custom-made components. Repeatable CNC settings are particularly valuable when several identical parts must be formed with the same diameter and curvature.

Condition: new, Year of construction: 2025, sheet width 1320 mm plate thickness 2.5 mm ST thickness at "Niro-steel" 1.2 mm blade length 1350 mm no. of strokes 34 Hub/min back stop - adjustable max. 825 mm cutting angle 1.5 ° work height max. 810 mm Control konv. engine output 3.0 kW weight 1100 kg range L-W-H 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used (!!) Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor - Manual backgauge, including analog position indicator * Adjustment range max. 825 mm - Manual cutting gap adjustment Nsdpfx Ajxabz Hohnelf - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connection cable + plug

Condition: used, Year of construction: 2001, Electric guillotine R.A.S with mechanical rear support, fully operational, available for testing. Specification: Model: R.A.S 52.30 Year: 2001 Manufactured in: Germany Nljdpfx Aottv Ecjhnof Working length: 3 100 mm Shearing thickness max: 2.0 mm Rear support: mechanical 770 mm Weight: 1950 kg Other: forward sheet metal drop. If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Nljdpfxjd Dy Ugj Ahnef Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: used, Sheet metal trolley, welded steel construction Second-hand Single-sided loading platform made of plywood 5° tilt Side rail height: 915 mm Trolley powder-coated in RAL 5010 gentian blue Permanent or surface-protected impact- and scratch-resistant Tyres made of thermoplastic rubber on plastic rims with precision deep-groove ball bearings, grey, non-marking Nedpjzk Nr Isfx Ahnslf Thread and foot protection 2 swivel castors with wheel locks and 2 fixed castors 1500 x 370 Wheel diameter (mm) 200 x 40 Load capacity (kg) 500 Weight (kg) 47.5 Dimensions (WxDxH, mm) 1500 x 680 x 1200 Availability: at short notice Storage location: Flörsheim

Condition: used, This listing is for 1 of 2 Velp Scientific HSC Heating Magnetic Stirrer. The unit is in full working condition and is ready for immediate release. The Velp Scientific HSC Heating Magnetic Stirrer is an analogue heating magnetic stirrer designed for basic heating and stirring applications in chemistry, biology, and pharmaceutical laboratories. It features a rugged design with a ceramic heating plate that resists acids, bases, and solvents, and a techno-polymer casing that resists chemicals, scratches, and surface abrasions. Key Specifications Maximum temperature: 400°C Stirring volume: up to 15 liters Stirring speed: up to 1300 RPM Heating control: Analog Ceramic hot plate: Square-shaped and resistant to chemicals and scratches Nledpfjxx Ai Nex Ahnjf Power supply: 115V/60Hz Dimensions: 8x3.7x13.5 inches

Year of construction: 2020, condition: used, functionality: fully functional, Miltenyi Biotec CliniMACS Plus Magnetic cell separator 2020. The user-friendly key components of the CliniMACS Plus Instrument offer sophisticated applications for a whole variety of separations. The selected stem cells, monocytes, DCs, NK cells, B cells, and T cell subsets allow research in the field of regenerative medicine, adoptive immunotherapy, and graft engineering. Cells are magnetically labeled in the Cell Preparation Bag using an antigen-specific reagent. Subsequently, the Cell Preparation Bag is connected to the CliniMACS Plus Instrument. Intuitive software facilitates target cell enrichment or depletion as well as final collection in the Cell Collection Bag. The CliniMACS System separates large numbers of cells providing target cells with high purity and excellent yield. Electrical: 100-240V, 50/60Hz, 4 Amps, 350VA Njdpst E Hmrofx Ahnjlf Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 150 mm, side roll diameter: 130 mm, working width: 2,050 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, STANDARD EQUIPMENT - Steel construction main frames - Hydraulic top roll opening head - Movable control panel - Centrally driven rolls powered by electric motor - Hydraulic up/down movement of rear and lower roll - Precision bending with main motor equipped with brake - Conical bending and pre-bending system - Upper and lower roll driven by planetary gearbox - Rear roll ball support system for easier plate handling - Compliance with EU safety directives - High-strength forged steel rolls made of SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 pcs) - Operating manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for support during large-diameter bending - Hydraulic side supports for large-diameter bending Nledpfx Ahexw D Udsnof - Ground and polished rolls - Wire grooves on roll ends - NC control unit - Dual-speed operation - Stepless speed adjustment - Ejector system - Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 3/4 mm Bending: 4/6 mm Upper & Lower Roll Diameter: 150 mm Side Roll Diameter: 130 mm Min. Bending Diameter: 225 / 750 mm Motor Power: 2.2 + 1.1 kW Bending Speed: 6 m/min Tank Capacity: 25 l Length: 3800 mm Width: 950 mm Height: 1100 mm Weight: 2250 kg

Condition: new, Year of construction: 2025, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 190 mm, roller (top) diameter: 190 mm, working width: 2,550 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 4 kW (5.44 HP), STANDARD EQUIPMENT This mechanical model is generally manufactured for use in light and medium-duty operations. It is especially used for bending materials up to 10 mm thick. Applications include bending of aluminum sheets, the manufacture of ventilation ducts, advertising panels, machine bodyworks and sheet metal components, and many other similar tasks. All models are equipped with planetary gearbox drive High-strength shafts manufactured from SAE 1050 (CK 45) certified steel Welded steel main frames Manually openable top roll Mobile control panel Conical bending roller Centralized lubrication system Precise bending feature via braked motor and planetary gearbox Powered rear roll with up/down movement Top roll support system In compliance with EU Safety Directives (CE Certificate) User manual OPTIONAL EQUIPMENT Digital display for rear roll Hardened shafts Extended shaft ends for mounting profile and pipe bending rolls Nlodpox D Dfvsfx Ahnof Profile and pipe bending roll set Motorized lower roll with up/down movement Derlin ringed top roll for Alucobond bending Adjustable speed steps NC Control TECHNICAL SPECIFICATIONS Bending length: 2550 MM Pre-bending: 4/5 MM Bending: 5/6 MM Top & bottom roll diameter: 190 MM Min. bending diameter: 285 MM Main motor power: 4 kW Rear motor power: 1.5 kW Length: 4700 MM Width: 950 MM Height: 1300 MM Weight: 3400 KG

Condition: good (used), Year of construction: 1997, machine/vehicle number: 607697782, Offer 23220 Technical Data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle, hydraulically adjustable 0.3 - 3° - Manual adjustment of the cutting gap - Number of hydraulic clamping cylinders 17 pcs - Motor-controlled rear stop 20 - 700 mm - Front angle stop + support arms Nledpfxszqdcbj Ahnof - Stroke rate depending on the cutting angle and cutting length 7 - 17 strokes/min - Hydraulic drive 400 V / 15 kW - Table height approx. 900 mm - Space requirement including rear stop, without front support arms - approx. W 3700 x H 1850 x D 2250 mm - Weight approx. 5800 kg - Including: - E-foot switch - Cutting line illumination - Cutting length preselection via potentiometer - Machine rear with light curtain safety

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm Nedpshhc Ixsfx Ahnjlf - max. cutting capacity St 40 4 mm - motorized cutting angle adjustment - cutting gap adjustment by means of graduated adjusting screws - number of hydraulic clamping bars 14 pcs - motorized rear stop with positioning 10 - 1000 mm - number of strokes depending on cutting angle and cutting length 23 per minute - hydraulic drive 400 V / 7.5 kW - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - including: - sheet metal lifting with pneumatic assistance - front angle stop + support arms - electronic cutting depth adjustment - cutting line illumination - electric foot switch

Year of construction: 1993, condition: good (used), machine/vehicle number: 479, Offer 22408 Technical data: - max working width 3050 mm - max cutting capacity St 40 10 mm - throat 270 mm - cutting angle ° - cutting gap adjustment by hand - number of hydraulic hold-downs 16 pcs - motorized backgauge 20 - 650 mm - front angle fence + support arms Nedpfx Ahepxmxcjnslf - number of strokes depending on cutting angle and cutting length 7 - 12 per/min - hydraulic drive 400 V / 22 kW - table height approx. 820 mm - Space requirement incl. backgauge, without front support arms - approx. W 3850 x H 2000 x D 2000 mm - weight approx. 8500 kg - with: - E-foot - switch - cutting line lighting

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm Nsdpfxot Ucgao Ahnelf - Weight approx. 4.5 t

Condition: used, sheet width:2500 mm plate thickness:1,25 mm Njdpfecxxqcsx Ahnelf total power requirement:2,2 kW dimensions of the machine ca.:1,40 x 3,40 x 1,50 m