Used Maho Mc 50 for sale (440)

Condition: excellent (used), Year of construction: 2016, operating hours: 3,752 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, controller manufacturer: Heidenhain, controller model: 640, rotational speed (max.): 20,000 rpm, overall weight: 9,650 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 1,615 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 120, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine in very good technical condition! Itsdpfxezaqz Ds Adlsl

Condition: used, Year of construction: 2005, operating hours: 11,100 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 380 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 530, table load: 300 kg, rotary table diameter: 630 mm, overall weight: 4,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 16, Equipment: chip conveyor, documentation/manual, The machine is still in operation and can be tested while powered. Available from approximately December 2026. At approximately 10,000 spindle operating hours, the spindle was re-bearinged, and the ball screws in the X, Y, and Z axes were replaced. Itedpfx Adoz Damteljl Includes Heidenhain probe. Tool holder: SK 40. The zero-point clamping plate shown on the table will be removed and is not included in the sale.

Condition: excellent (used), Year of construction: 2002, Control Siemens Sinumerik 840D Travel paths X/Y/Z: 560 x 560 x 510 mm Ijdpfx Ajyrir Sedlotl Spindle speed 15,000 min-1 2-fold pallet changer 400 x 400 mm Tool magazine for 40 tools, SK 40 Paper filter Chip conveyor

Condition: good (used), Year of construction: 2001, operating hours: 12,219 h, functionality: fully functional, nominal power (apparent): 30 kVA, controller manufacturer: Siemens, controller model: Sinumerik, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, For sale is a used CNC vertical machining center, DECKEL MAHO DMC 63 V, manufactured in 2001, in good condition for its age. The machine is operational and can be inspected with power applied after prior arrangement. • Control system: Siemens Sinumerik • 4th axis from PL Lehmann with three-jaw chuck • Tool magazine • Coolant system with separate unit for high-pressure internal cooling • Operating hours: approximately 12,219 hours in single-shift operation • Chip conveyor Supply voltage: 400 V Phases: 3+PE Frequency: 50/60 Hz Current consumption: 42 A Fuse rating: 50 A Power consumption: 30 kVA Secondary voltage: 230 V Secondary voltage: 24 V Machine number: 809 409 If you have any questions or require further information, please send us a message or call us. Isdpfxjz Dpkzj Adlstl

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: not functional, overall weight: 10,700 kg, Control unit defective, can be used as a source of spare parts. Isdpfez Atpnsx Adlstl For self-collection only. Details see the attachment and available upon request.

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 11045529844, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 20,000 mm, feed length Y-axis: 20,000 mm, feed length Z-axis: 20,000 mm, nominal power (apparent): 50 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,700 mm, total length: 6,500 mm, total width: 3,000 mm, table width: 380 mm, table length: 500 mm, overall weight: 7,000 kg, number of slots in tool magazine: 60, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, Equipment: chip conveyor, DECKEL MAHO DMU 50 EVOLUTION CNC Universal Machining Center - Tool holder: SK 40 - Resolution of the linear measuring system X/Y/Z: 0.001 mm Ijdozxyuijpfx Adletl - Positional tolerance in X/Y/Z: 0.010 mm - Max. tool length from spindle nose: 280 mm - Max. tool weight with automatic tool change: 6 kg - NC rotary table with swivel axis, clamping area: 500 x 380 mm - Distance between T-slots: 63 mm 14 H 7 - Centering bore: 30 mm - Swivel speed: 26 rpm - Swivel range: 180° - Input and display resolution: 0.001° - Max. weight: 330 kg - Includes three-jaw chuck, diameter: 250 mm - Includes the tool holders located in the tool changer - Includes chip conveyor and coolant system Note: the machine can be transported on a standard truck! FCA D-63843 Niedernberg - loaded onto a truck

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, workpiece length (max.): 630 mm, workpiece width (max.): 630 mm, workpiece height (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 Ijdpfsz Dp Dbox Adlstl C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 54257 Spindle Working: 32498 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: MAHO Toolroom Milling Machine Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Iodpfx Ajzwud Nedljtl Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill stroke 50 mm Travel X/Y/Z 500/380/350 mm Drive 3 kW Feed rates 10 – 1000 mm/min Coolant system Weight 1600 kg Adapters Hydraulic vise Price: €3,000 plus VAT, ex location

Condition: excellent (used), Year of construction: 2015, operating hours: 26,800 h, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 475 mm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Deckel Maho DMC 850V Machining Center Technical Data CNC Control: Siemens 840 Ergoline Travel in X-axis mm: 850 Travel in Y-axis mm: 520 Travel in Z-axis mm: 475 Feed rates m/min: 42 Max. Iedpfx Ajz Ayhwodletl Spindle speed rpm: 14,000 Coolant supply through the spindle bar: 20 Tool holder: SK 40 Magazine: 30 Chip conveyor Tank capacity liters: 600 Infrared probe Tool measurement TT140 Internal coolant supply Flushing gun Direct XYZ measuring system Operating hours: 26,600 h Spindle operating hours: 11,000 h Base machine: Dimensions/Weight L/W/H mm: 3,600 x 2,300 x 2,700 Weight kg: 5,750

Condition: excellent (used), Year of construction: 2015, operating hours: 28,000 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, spindle speed (min.): 14,000 rpm, operating hours of spindle: 14,500 h, coolant supply: 20 bar, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Machining center Deckel Maho DMC 1150V Technical data CNC control: Siemens Ergoline Itjdpfx Adoz Ayg Tjlsl Travel in X-axis mm: 1150 Travel in Y-axis mm: 700 Travel in Z-axis mm: 550 Feed rates m/min: 42 Max. spindle speed rpm: 14000 Coolant supply through the spindle bar: 20 Tool holder: SK 40 Magazine: 30 Chip conveyor Tank capacity liters: 600 Measuring probe Infrared tool measurement TT140 Coolant gun Direct measuring system XYZ Operating hours: 26,600 h Spindle operating time: 11,000 h Base machine: Dimensions/Weight L/W/H mm: 3600 x 2300 x 2700 Weight kg: 5750

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, Machine type: CNC vertical machining center Travel in X-axis: 1,040 mm Itsdpfxsz Dd Saj Adlol Travel in Y-axis: 600 mm Travel in Z-axis: 500 mm Table size: 1,250 × 600 mm Max. table load: 600–800 kg Tool holder: SK 40 Tool changer: 30 positions Max. tool diameter: 100 mm / 140 mm with available adjacent positions Max. tool length: 300 mm Max. tool weight: 7 kg Feed rate: up to 40 m/min Rapid traverse: up to 70 m/min Machine weight: approx. 8,900 kg Linear drive / Linear technology

Condition: good (used), Year of construction: 2005, functionality: fully functional, Maho DMU 50, Year of manufacture 2005, Control system Siemens 840 D Powerline Shop Mill, Travel range X/Y/Z 500/450/400 mm, 2-axis NC swivel/rotary table Ø 630 x 500 mm, Max. table load 200 kg, Swivel range -5° / +110°, Digital drives, Spindle speed up to 10,000 rpm, SK 40, Direct linear scales X/Y/Z, 30-fold coolant, Ijdpfx Adezxm Dweljtl Additional cabinet door on the right, Operating mode 4, Infrared measuring probe Heidenhain TS 641, Electric handwheel, MDE interface, Additional V24 interface on the control cabinet, Previous application: production of samples and prototypes.

Condition: used, Year of construction: 2011, operating hours: 43,774 h, functionality: fully functional, workpiece height (max.): 500 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 200 kg, total height: 2,590 mm, total length: 4,780 mm, total width: 4,410 mm, table height: 390 mm, table length: 390 mm, overall weight: 5,900 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 25 W, number of slots in tool magazine: 30, Equipment: chip conveyor, Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Isdpfx Adjz Dku Ueletl Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Oil skimmer Ready for internal cooling (40/80 bar) RENISHAW Measuring probe Automatic door Machine running times Under power: 43774 Spindle Working: 26476 Rated power kVA: 48 Basic machine dimensions / weight Length mm: 4780 Width mm: 4410 Height mm: 2590 Weight kg: 5900

Condition: good (used), Year of construction: 1998, operating hours: 13,143 h, functionality: fully functional, nominal power (apparent): 22 kVA, controller manufacturer: Siemens, controller model: Sinumerik, input voltage: 400 V, For sale is another CNC vertical machining center, a DECKEL MAHO DMC 63 V from 1998, used and in good condition, commensurate with its age. The machine is operational and can be inspected in person with power applied, by prior arrangement. • Year of manufacture: 1998 • Control system: Siemens Sinumerik • 4th axis with clamping device • Tool magazine • Coolant system • Operating hours: approx. 13,143 hours in single-shift operation Mains voltage: 400 V Frequency: Hz Ijdpfx Adjz Dplfslotl Rated current: 17 A Apparent power: 22 kVA Auxiliary voltage: 230 V Control voltage: 24 V Type: DMC 63 V Serial number: A0883 Machine number: 999-d-076 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2007, operating hours: 32,947 h, functionality: fully functional, Deckel Maho DMC 100H duo Block About the machine: Very robust machine. The main spindle was renewed in 2023. Technical Data: - Control: Siemens 840D - Travel range X, Y, Z axis: 1000/1000/1000mm - C-axis travel range: 360° - Clamping surface rotary table: 800x800mm - Rapid traverse: 60 m/min - Spindle speed: 20-12,000 rpm - Tool holder: SK50 - Tool magazine with 60 slots - Network connectivity - Automation interface possible Equipment: - Through-spindle coolant 50 bar with belt filter system - Work area flushing - Rinse gun - Chip conveyor Itodpfx Aoyhwqmodlel An inspection or test under power on site is of course possible. We are happy to offer you transportation, installation, and commissioning of the machine at your site. All from a single source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhaul - Automation of DMG machines and those of other renowned manufacturers. We support you! From purchasing your machine, through transport and installation, to commissioning and subsequent maintenance or repair work—you can count on us.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm Iodpfx Adezu Ixnjletl T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Condition: good (used), Year of construction: 2004, functionality: fully functional, Universal machining centre Deckel Maho DMU 50 M with Heidenhain TNC 310 CNC control. Swivel-rotary table, SK 40 spindle taper with hydraulic drawbar. In good working condition, can be inspected under power. Itedpfjytpy Eex Adlol

Condition: used, Year of construction: 2002, Deckel Maho DMU 50 T Milling machine Condition: Used Year of manufacture: 2002 Operating hours: 34,739 hours Program running time: 6,435 hours Technical data Tool holder: SK 40 Number of tool positions: 16 Travel ranges X/Y/Z: 500 mm / 400 mm / 400 mm Spindle speed range: 20 - 9000 rpm, stepless Iodpfx Aozhlq Iodljtl Table size: 700 mm x 500 mm, rotary table Motor power: 9 kW at 100% duty cycle / 13 kW at 40% duty cycle Connection: total 17 kVA Weight: approx. 3,000 kg Dimensions L x W x H: approx. 2100 m x 1520 (without peripherals) approx. 2140 mm

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg Itjdpfx Aey E Tv Aodlol T-slots 7x 14 x 63 mm number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 - 3 Axis - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import

Condition: good (used), Year of construction: 2004, operating hours: 6,293 h, functionality: fully functional, For sale is a machining centre from the manufacturer Deckel Maho, model DMU 50. The machine is in good condition and can be inspected on site. Iodpfx Adoyghqvoletl

Condition: used, Year of construction: 2000, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control Heidenhain spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 16 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery Itedpfx Aezy Sibodlel only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2011, operating hours: 34,300 h, functionality: fully functional, machine/vehicle number: 1190 000077 3, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece weight (max.): 1,200 kg, total height: 3,100 mm, total length: 4,850 mm, total width: 4,350 mm, table width: 680 mm, table length: 680 mm, rotational speed (max.): 10,000 rpm, overall weight: 16,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 13,400 h, coolant supply: 40 bar, input voltage: 4,000 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DMG MORI DMC 80H duoBLOCK – 4-Axis Horizontal Machining Center with Pallet Changer – Used For sale is a used horizontal machining center, model DMG MORI DMC 80H duoBLOCK. The machine is currently still in productive operation and is reliably used for series production. It is primarily utilized for machining steel and cast materials. Condition: Fully functional and ready for operation. Inspection under power possible by appointment. Equipment: 4-axis machining Itodpfjy Iwdpsx Adljl Horizontal design for efficient chip evacuation Pallet changer to minimize non-productive times DuoBLOCK construction for high stability and precision Tool changer Spacious work area for complex components Further equipment details available on request Application area: Ideal for series production and demanding machining tasks in mechanical engineering, toolmaking, and industrial applications. Sales conditions: Price ex-foundation Disassembly, removal, loading, and transport to be arranged by the buyer Inspection by appointment possible Price negotiable Delivery according to EXW (Ex Works)

Condition: good (used), Year of construction: 2007, functionality: fully functional, DMG DMU 50 3+2 axes SPINDLE overhauled 01/2026 Control system: Heidenhain iTNC 530 Itedpfx Aeza T A Dedlsl Hours: 11,275 program hours x-axis travel: 500 mm y-axis travel: 450 mm z-axis travel: 400 mm Control system: iTNC 530 Heidenhain Spindle speed range – main spindle: 20 – 10,000 rpm Tool holder: SK 40 DIN 69871 Table surface: 700 x 500 mm Max. table load: 500 kg T-slots: 7 x 14 x 63 mm Number of tool positions: 30 Max. tool weight: 6 kg Rapid traverse rate: 24 m/min Feed force: 4.5 kN Feed rate: 1 – 24,000 mm/min Total power consumption: 26 kVA Machine weight: approx. 4.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Chip conveyor Handwheel Measuring probe Coolant gun Available immediately

Year of construction: 2005, condition: used, X-axis: 500mm, Y-axis: 450mm, Z-axis: 400mm, swivel rotary table dimensions: 630x500mm, max. table load: 200kg, swivel range: -5 to 110°, continuously variable speed: 20-10,000/min, drive power (100%/40% duty cycle): 9kW/13kW, torque (40% duty cycle): 82Nm, input resolution: 0.01mm, positioning tolerance: 0.010mm, rapid traverse: 24m/min, feed speed: 20m/min, number of SK40 tool positions (DIN 69871): 30, tool diameter (speed-dependent): D80-D130, max. tool length: 290mm, max. tool weight: 6kg, connected load: 17kW, control: Siemens 840D Powerline ShopMill, length: 4860mm, width: 4350mm, height: 2424mm, transport dimensions: 2210x2120x2150mm, weight: 4.05t, operating hours power-on time: 35,880h, spindle hours: 9609h. Equipment: digital drive and hydraulic clamping (positioning operation only), electronic angle display and plane transformation, chain magazine with double gripper, additional cabin door on the right, 80l coolant system, coolant/compressed-air switching, flushing gun, oil pan drawing, MDE interface (machine on, machine running, piece counter), documentation in German, 3D machine model for kinematic simulation in the CAM programming system (IGES, STEP format), numerous SK40 tool holders (DIN 69871), Heidenhain TS641 infrared touch probe, electronic handwheel, additional V24 RS232 interface on the control cabinet. An on-site inspection is possible. Itodpfxjzxr Rco Adlol

Condition: used, functionality: fully functional, Equipment: chip conveyor, documentation/manual, For sale here is a CNC machining center, DMC 1035V, including a Microset UNO tool measuring system, mounting bracket for the SK 40 tool holders, a tool cabinet, and approximately 140 tools and SK 40 tool holders. The machine is well-maintained and clean and has a 30-position tool changer, including a band filter system. The only defect on the machine is that the rotary through-spindle is leaking for the internal coolant supply (IKZ). Furthermore, the milling machine has a DXF converter and an offline programming station. Sold with VAT shown. No returns, no warranty. Ijdsz Ahgzopfx Adljtl