Used Main Spindle for sale (18,680)

Condition: like new (used), Year of construction: 2020, operating hours: 5,600 h, functionality: fully functional, machine/vehicle number: 0-250-77-3262, 1. BASIC MACHINE - rigid steel frame construction - 2 workpiece clamping devices with integrated stop system - Separate adjustment of the clamping devices via rack and pinion gear in X-direction - Digital AC servomotors - The position of the clamping devices at the workpiece is program-controlled - Adjustment of the clamping devices between the separate processing steps in the processing area is possible. - Automatic measuring of the workpiece thickness and lengths by the clamps and the stop system - Blowing nozzle for safe removal of residual parts off the clamps 1.1 LOWER PROCESSING SUPPORT - Rigid aluminium cast construction - Integrated threefold divided table with selectable air cushion - Lateral stop system - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.2 UPPER PROCESSING SUPPORT - Rigid aluminium cast construction Blodpfxjz Df Txs Ahrsp - Integrated threefold divided pressure beam with selectable air cushion - Adjustment of the axes in Y- and Z-direction - Ball bearing spindle (Z-direction) and rack and pinion gear (Y-direction) - Digital AC servomotors - Suitable for fitting of various configurations 1.3 WORKPIECE DIMENSIONS workpiece length: min. 200 mm workpiece length: max. 2500 mm workpiece width: min. 70 mm workpiece width: max. 1000 mm - with restrictions in processing: 1300 mm workpiece thickness: min. 8 mm (2 x 4 mm) workpiece thickness: max. 80 mm (2 x 40mm) workpiece stacking: max. 2 pieces - same workpiece dimensions Note: - Workpieces must have a straight edge at the reference edge - Max. curve tolerance: +/- 0.5 mm for a work- piece length = 2000 mm - The workpiece length/width ratio should be >=1. The longer edge of the workpiece should be placed on the machine. - Warped workpieces (>= 0.3 mm) lead to a higher rate of processing tolerances and wear at the workpiece tables - Due to the chips no stackable workpieces can be guaranteed for router processings. - An external cleaning or extraction in the outfeed area is recommended. - For through holes of double parts the drilling quality depends on the workpiece material and the tool as well as on the feeding speed profile and the rotation speed of the drilling spindle. Thus, however, efficiency could possibly be reduced. 1.4 WORKPIECE FEEDING AREA - Air cushion table in rigid frame construction - Surface from Hornit board - integrated fan 1.5 WORKPIECE REMOVAL AREA - Cross belt conveyor in rigid frame construction - 8 transport belts, frequency-controlled drive - 8 electro-pneumatic controlled disengaging device 2. CE SAFETY AND PROTECTION DEVICES - Safety fences in the lateral and rear area - Safety mats in the feeding area 3. ENVIRONMENTAL CONDITIONS - prescribed environmental temperature: + 5 degrees up to + 40° C (in case of environmental temperature >35°C or air humidity >65% a cooling unit for switch cabinet is recommended) 4. ENERGY SAVING MODE - ecoPlus button for starting stand-by operation. The button can be activated during processing. This will have the following impacts after the end of the program: - Primary power of drives will be switched

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: AB00022616, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 901 kg, SCM Class TI 145ep shaper in CE version, manufactured in 2022. Equipped with the READY 3 UP system, featuring a shaper fence with mechanical programming, a FAST sectional table with manual adjustment, and a support for the feeder with manual vertical and horizontal movements. Interchangeable shaper arbor with MK 5 coupling, tool holder cone MK 5 with adapter and clamp (right), and a T-SET rapid tool clamping system. LL version with 2 cast iron table extensions for profiling. Bljdpfoz Nggrox Ahrop

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2023001552, overall weight: 550 kg, position of the milling head: Vertical, 2-axis A/C fork, total width: 655 mm, total height: 1,373 mm, mount diameter: 335 mm, type of input current: three-phase, torque: 67 Nm, rotational speed (max.): 24,000 rpm, pivoting range: 220 °, spindle motor power: 42,000 W, coolant supply: 50 bar, power: 42 kW (57.10 HP), Equipment: rotational speed infinitely variable, Unused HSD HST810-M two-axis fork head with ES510 electrospindle, HSD article H8099H0048, built 2023, never installed or powered. Supplied new by HSD S.p.A. (Italy) through HSD’s Australian partner in August 2023 and stored since then in its original HSD crates in a locked warehouse in Melbourne. The head is still sealed in HSD’s VCI bag on its steel transport frame (HSD works order OdL 2013060, production number 2023001552). Head HST810-M: A axis ±110°, C axis ±360°, HSD direct-drive torque motors (A 707 Nm max, C 1,250 Nm max), hydraulic brakes 2,000 / 4,000 Nm, Heidenhain RCN 8380 absolute encoders (EnDat 2.2), 2 arcsec, 180°/s, mass 550 kg, Ø335 g7 machine fitting, overall height 1,373 mm. Electrospindle ES510: HSK-A63, 42 kW S1 / 55 kW S6, 66.8 Nm S1 / 87.5 Nm S6, rated 6,000 rpm, max 24,000 rpm, air-oil lubrication, liquid cooled, hydraulic tool release, Lenord + Bauer 256 pulse 1 Vpp spindle encoder, rotary joint for through-spindle coolant. Included: HSD oil-air lubrication unit CC34250005 (24 V DC) and HSD 3-phase line reactor CCA4050012 (0.4 mH, 130 A), both in their HSD crates, and the HSD installation drawing H8099H0048 with SINAMICS and SIMODRIVE motor parameter sets. Suitable for 5-axis gantry and portal machines for aluminium, composites and light alloys. Siemens-ready; other controls need EnDat 2.2 capable drives. Condition and warranty: unused, 0 hours. The unit is outside HSD’s warranty period and is sold without manufacturer warranty. A pre-shipment run-up test at an Australian spindle service workshop, with written report and video, can be arranged at the buyer’s cost. Inspection in Melbourne by appointment. Terms: price net, FCA Melbourne (Incoterms 2020) in the original crates, payment in full before release by bank transfer or escrow. Export from Australia is subject to an export permit where required; the buyer provides end-user details. Freight, insurance, import duties and commissioning are excluded. Seller: Fleischmann’s Machines Pty Ltd, Melbourne, Australia. Bljdpfx Ae Afb Stjhrep

Condition: new, Year of construction: 2026, HOFMANN TFS 107 Table milling machine with swivel adjustment +/- 45.5° 7.5 kW motor, 400 V, 50 Hz, Table size 1,200 x 815 mm, heavy-duty ribbed cast iron table, with table rings Electronic start and braking system Electric height and swivel adjustment in rapid and slow mode accurate to 1/10, height adjustment approx. 145 mm, Swivel adjustment +/- 45.5° 4 speeds 3,000/4,500/6,000/9,000 Milling fence type 2601, efficient with multiplex fence jaws Fixed milling spindle Ø 30 mm with quick-release nut "fix" Left/right rotation, machine socket, arc milling guard type TAPOA, Hofmann "Centrex". Includes options: - Table size 2000 x 815 mm with extendable support by 480 mm, instead of standard table - Stepless speed control TFS 107 from 1,500 to 10,000 rpm incl. 7.5 kW motor, - HOFMANN milling fence type 2620, including quick-release system for the fence jaws, digital display - 2 cast iron fence jaws 500/500 mm - Control panel moved upwards Bjdpfozyf Iksx Ahrslp - Tool compartment for TFS 107

Condition: good (used), Year of construction: 1998, functionality: fully functional, number of spindles: 35, Multi-spindle drilling machine (dowelling machine), model from the Vitap Alfa 35 series. [1, 2] This type of machine is used in the furniture industry for precise linear drilling of holes for dowels (axes), shelves, connecting elements, and fittings in wooden panels (chipboard, MDF, solid wood). [1] The main features of the machine in the image: Blodpfx Ajz Ef R Tshrsp Drilling head with 35 spindles: The long, green support arm (drilling spindle) has 35 parallel spindles with a distance of 32 mm between them (standard system for furniture). The drill bits alternate in a left-hand

Condition: excellent (used), machine/vehicle number: 85039, Model: 371 Equipment / Additional information: Bledpfoth U E Eox Ahrep Ø max. 15 mm Distance between drills: 60-120 mm

Condition: new, Year of construction: 2022, Swivel spindle 0° - 45° Height and swivel adjustment via handwheel Dial indicators in the handwheel Motor power 7.0 kW Bledpfx Asipv A Tjhrop 4 speeds 30mm milling spindle Aluminum clamping jaws Milling fence with crank adjustment Long cast iron tables Safety rulers

Condition: good (used), Year of construction: 1989, machine/vehicle number: 18052, functionality: fully functional, pressing force: 3 t, stroke length: 500 mm, distance table to ram: 500 mm, total length: 700 mm, total width: 300 mm, total height: 780 mm, overall weight: 185 kg, Dornpresse Ageo DP3000R in good, fully functional condition. Technical specifications can be found in the last image. Bsdjz Hlplepfx Ahrslp

Condition: used, Year of construction: 1998, number of spindles 6 spindle passage 27 mm turning length 59 mm hexagon material 24 mm square material 18 mm cross slide travel 36 mm longitudinal slide travel 85 mm spindle turning speed range 366 - 5020 U/min max. torque 95 Nm control INDEX Bsdpfxsvh Naqj Ahrelp total power requirement 20 kW - 6 cross slides - 6 longitudinal slides - polygon device - thread cutting device - hydr. tapping device - workpiece removal belt - bar loading magazine PIETRO CUCCHI, model AN-BN Accessories: various tool holders, various collets, chip conveyor, coolant

Condition: excellent (used), machine/vehicle number: 70218, Equipment / Additional information: Various tools Bjdpfx Ahepithajrjlp Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: excellent (used), Manufacturer: Indramat spindle motor with Emag spindle Type: 1MB 310 D-6DB-A094A1/SO20 Rotor: 1MR 310 D-A094/SO20 Stator: 1MS 310 D-6B-A1/SO20 Pn 19 kW P kb 27 kW n N 700 rpm n max 6000 rpm Condition: Used, fully functional 2 units available in stock. Bljdjv U Ag Dspfx Ahrjp

Condition: used, functionality: unexamined, Ferwood Code: RU0008953 - Manufacturer Code: - Condition: Used - Functionality: Not tested - Compatible Machine: BIESSE TECHNO FDT BORING MACHINE - TECHNO F - TECHNO S - If interested we offer a revision service, contact us. Bodov Hp R Tspfx Ahrjlp

Condition: used, functionality: fully functional, spindle diameter: 40 mm, Spindle for thickness planer Blsdpfxst Uvz Rj Ahrsp

Condition: used, Horizontal drilling machine with 4 spindles Bljdpjzxg Dqsfx Ahrop

Condition: used, Vertical drilling machine with 2 adjustable spindles. Maximum drilling width 440 mm Minimum drilling width 250 mm Bodpfszxg Dwox Ahrjlp Maximum depth 250 mm Engine power hp. 2

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, number of spindles: 2, spindle speed (max.): 4,500 rpm, turning length: 145 mm, turning diameter: 240 mm, travel distance X-axis: 130 mm, travel distance Z-axis: 145 mm, Horizontal, twin-spindle CNC lathe with 2 turrets in two working areas and 2 loading portals! The machine underwent an overhaul in 2023! TECHNICAL DETAILS Turning diameter max.: 240 mm Turning length max.: 145 mm Travel X-axis: 130 mm Travel Z-axis: 145 mm Distance between spindles: 340 mm Rapid traverse X/Z-axis: 24 m/min Guidance X-axis: Roller linear guide Guidance Z-axis: Round guide, 145 mm Number of spindles: 2 Spindle drive power: 11 / 7.5 kW Max. spindle speed: 4,500 rpm Torque: 93 Nm Spindle nose: JIS A2-5 Chuck size: 210 mm (8 inches) Number of turrets: 2 Turret type: BT turret Tool positions per turret: 8 Shank size for external turning tools: 20 × 20 mm Max. shank diameter for boring bars: 40 mm MACHINE DETAILS Control: Fanuc 32i-B Working areas: 2 Power connection: 30 kVA Dimensions & Weight Footprint: 4,500 × 2,440 mm Overall height with loader: 2,550 mm Weight: 4,400 kg Loading portal GT Twin with two independent portals Dual gripper for raw and finished parts Turning station Control unit with cable Max. workpiece diameter: 120 mm Max. workpiece length: 80 mm Max. workpiece weight: 3 kg EQUIPMENT Stack magazine, on the left side Parts conveyor belt, on the right side Chip conveyor, on the rear side Coolant tank Coolant supply through both spindles for flushing the clamping devices Blsdpfeztxlcsx Ahrep Various tool holders Various clamping devices Documentation and wiring diagrams

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 471292, functionality: fully functional, operating hours: 438 h, power: 7.5 kW (10.20 HP), spindle diameter: 40 mm, rotational speed (max.): 9,000 rpm, total length: 3,000 mm, total width: 1,500 mm, total height: 1,820 mm, overall weight: 1,150 kg, Equipment: documentation/manual, Offering a used Martin T26 Duo Control swivel spindle milling machine for sale. Sale due to company restructuring. GS tested, BG test certificate, CE compliant. Technical data: Spindle swivel: -45 to +45° Height adjustment: electric with rapid and slow feed Depth adjustment: electric Table opening: electrically adjustable from 70 - 220mm Swivel adjustment: electric Feed rate (height): electric Stop adjustment: manual Height display: digital Bledpozwp Uijfx Ahrjp Swivel angle display: digital Milling stop display: digital Spindle diameter: 40mm with steep taper SK 40, collet quick-change system incl. torque wrench Electropneumatic locking via selector switch. Spindle speeds: 3000, 4500, 6000, 9000 rpm Power consumption: 7.5 / 9.5 kW Motor brake: wear-free, electrically braked Dust extraction connection: 2 x 120mm Machine length: 3000mm Machine width: 1400mm Weight: 1150kg Year of manufacture: 2007 Includes: Variomatic 4N feed system, continuously adjustable from 2-20 m/min, Protective device type Centrex Swivel device for milling stop Martin table extension on both sides with extendable workpiece support, approx. 3000mm long. Martin support for feed system, swivelable, with motorized height adjustment. Aigner Integral stop 650/500mm incl. filler bar. The machine is still connected and can be tested. Price plus VAT.

Year of construction: 1977, condition: ready for operation (used), Two Schütte six-spindle turning machines including one Iemca bar feeder are available. 1) Schütte SF 42, year of manufacture: 1977, number of spindles: 6, max. bar capacity: 42mm, max. longitudinal slide stroke: 125mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 6500mm/1400mm/2200mm, weight: approx. 10000kg. Including pick-off spindle, cams, collets, chip conveyor, oil mist extraction system and Iemca PRA40/33/P bar feeder. 2) Schütte SF 51 DNT, year of manufacture: 1987, max. bar capacity: 51mm, number of spindles: 6, max. turning length: 102mm, max. drilling depth: 102mm, spindle circle diameter: 340mm. Including pick-off spindle, CNC cross slide in position 4, cams, collets, auxiliary coolant pump and chip conveyor. Documentation available. An on-site inspection is possible. Blsdpfx Aszbuuwshrjp

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Z1/Z2: 700mm/720mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8200kg, control: Fanuc 31i-B, operating hours: 1407h, spindle hours: 343h. Includes transformer and chip conveyor. Documentation available. An on-site inspection is possible. Bedpfsxaphuox Ahrjlp

Year of construction: 1992, condition: ready for operation (used), Turrets: 2, tool stations: 12, tool holder: VDI 40, max. turning diameter: 320mm, max. swing diameter: 390mm, spindle bore: 61mm, speed: 5000rpm, spindle power: 15kW, travel X/Z: 230mm/430mm, machine dimensions X/Y/Z: 3900mm/2000mm/2900mm, weight: approx. 8600kg. Including robot. Documentation available. On-site inspection is possible. Bjdpfjyhgpasx Ahrelp

Condition: used, Year of construction: 1998, machine/vehicle number: AB/118120, SECOND-HAND TILTING SPINDLE MOULDER SCM MOD. T110 I - CE RULES - Volt. 400/50 - S/N AB/118120 Bsdpjwrfhkjfx Ahrslp - Year 1998

Condition: used, Year of construction: 1997, SECOND-HAND SPINDLE MOULDER GRIGGIO MOD. T220 - CE RULES - Year 1997 Bedpfxjwrh Iys Ahrslp

Condition: new, Precision lead and drive spindle lathe Manufacturer: OPTiturn Model: TH 4210 Item No.: 3462050 Condition: New machine Center height: 210 mm Center distance: 1,000 mm Standard equipment includes: Bsdpfx Ahjdbgxcerelp - Machine base - Four-position tool holder - LED machine light - Reducing sleeve MK 6/MK 4 - 2 fixed centering spindles MK 4 - Fixed steady rest, 15 – 105 mm - Traveling steady rest, 10-65 mm - Chuck guard, electrically interlocked - Coolant system - Set of change gears - Oil supply - Operating tools - Operating manual

Condition: refurbished (used), Year of construction: 2010, operating hours: 25,000 h, functionality: fully functional, load capacity: 200 kg, arm reach: 2,400 mm, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding Bljdegi Dztepfx Ahrjp - Cutting - Machine Feeding - Palletising - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR200 Comp Condition: Refurbished with 1 year of warranty Version: V5.6.12 Year: 2010 Control Cabin: KRC2 ed 05 Rated Payload: 200kg Access Distance: 2400mm Contents: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant + 2 Spindle Motors ( Set with Mechanical System ) + Electrical Panels + 2 Servo Drives + Cable Set + 8 DI / 8 DO Shipping: NOT included in the price Payment: 100% payment prior to collection

Condition: used, Year of construction: 2001, machine/vehicle number: 700643, 2-Spindel-Papierbohrmaschine - 2-head spindle paper drilling Nagel Citiborma 280BBaujahr / Year 2001 - Serial-No. 01052175 Standgerät / standing device Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Blodeh Axx Hopfx Ahrep