Used Gildemeister Multi Spindle Machine for sale (241)

Condition: ready for operation (used), Year of construction: 2002, operating hours: 63,040 h, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Machine configuration Upper linear slides: 2 units Milling unit: 1 unit Transverse drilling units: 2 units Rigid front spindle: 1 unit Machining units Drum 6: Movable only in the X-axis Front position 1: Rotationally rigid spindle, movable only forwards and backwards Lajdpfjzrgnpex Ag Aef Front positions 2 to 4: Rotationally fully controllable spindles Front position 5: Internal machining axis for processing internal contours and radii Front position 6: Driven indexing spindle with rear machining slide and two tools, movable towards the viewing side Full electronic equipment Electronically connectable auxiliary drives on the front positions and six drum slides MACHINE DETAILS Operating hours: 98,119 h Spindle hours: 63,040 h EQUIPMENT Chip conveyor High-pressure coolant unit Bar loader Milling unit Two transverse drilling units Collets Spare parts Electronic components for the control cabinet New rigid front spindle

Condition: good (used), Year of construction: 1990, Ref. -No.: 10542 Manufacturer: GILDEMEISTER Type: AS - 16 Year of construction: 1990 Max. Rod diameter: 16 mm Lasdpfx Aexmd Txjg Aof Number of spindles: 6 Pcs Guide rod length: 3,3 m Further information: The machine can be viewed under power by arrangement.

Condition: used, Pick-up truck pick-up control unit Lasdjzi U H Ijpfx Ag Aof Pietro Cucchi full-body loader

Condition: reconditioned (used), functionality: fully functional, GILDEMEISTER GS20 LATHE VARIANT 25 MM Ljdpfx Agow Sxpto Ajaf ELECTRICALLY AND MECHANICALLY REFURBISHED -REFURBISHED PNEUMATIC SECONDARY CHUCK -NEW AIR TREATMENT UNIT AND SOLENOID VALVES -RADIAL AND AXIAL SLIDES IN POS. 1-2-4-5 -WORKPIECE PICK-UP AT POS. 6 MECHANICAL OVERHAUL: 1. TURNTABLE OVERHAUL 2. SLIDE OVERHAUL 3. FRONT AND LEVER OVERHAUL 4. SPINDLE OVERHAUL 5. COLLET OPENING/CLOSING SYSTEM OVERHAUL 6. THREAD CUTTING UNIT OVERHAUL ELECTRICAL OVERHAUL: 1. NEW SIEMENS S71200 PLC AND SIEMENS KTP700 PANEL 2. CAM ENCODERS 3. RELAY REPLACEMENT

Condition: ready for operation (used), Year of construction: 2010, Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. Lsdpfx Aetqfq Ujg Ajaf

Condition: used, GILDEMEISTER GM35 AC MULTISPINDLE LATHE WITH PIETRO CUCCHI LOADER We can offer a lathe and loader overhauled as new with CE certificate Lsdpfx Agswrpb Ij Ajaf

Condition: new, Year of construction: 2024, Gildemeister 42ACF: is an automatic multi-spindle lathe designed to meet the demands of high-efficiency production. This model stands out for its versatility, capable of machining workpieces up to 42 mm in size with equal ease and precision. The 42ACF lathe offers a number of features that make it particularly easy to use. These include intuitive programming via a SIEMENS operator panel that makes it easy to set and change spindle rpm, cycle time and threading speed. Technical data: ● Number of spindles: 6 ● Maximum bar diameter: 42 [mm] ● Hexagonal wrench: 36 [mm] ● Cross bars : 4 (pos.1-2-4-5) Lasdpfx Agorpniqj Asf ● Maximum feed length : 130 [mm] ● Main spindle speeds : 400- 4000 [rpm] without threading ● Travel time: 1-1.5 [s] ● Cycle time: 2 to 90 [s] ● Power: 22 [KW] The Gildemeister 42ACF, on the other hand, is a multi-spindle lathe that targets highly specialized industries where precision and accuracy are imperative.

Condition: new, TECHNICAL DATA: Laodoq Nzl Tspfx Ag Aof - Number of spindles: 6 - Maximum bar diameter: 20 [mm] -Bar passage extension on request 25 [mm] - Cross carriages : 4 (pos.1-2-4-5) - Maximum feed length: 100 [mm] - Main spindle speeds : 400 - 4000 [rpm] with threading,400- 5000 [rpm] without threading - Travel time: 0.7 [s] - Cycle time: 1.4 - 60 [s] - Power: 11 [KW] ELECTRICAL PROVISION FOR LOADER INTERFACE Hardware and Software Interface for Loader ELECTRICAL EQUIPMENT consisting of theAC motors (protection type lP 54), main motor and feed with a PLC programmable Siemens S7-1500 DOCUMENTATION: CE certification with manuals Wiring diagrams I Hard copy + 1 Copy on USB with files in .pdf format EC Directive 2006142lCE - 2014130/EC 2O14I68IUE STANDARD

Condition: like new (used), Lathe completely overhauled from an electrical and mechanical point of view as new with painting Ledpfx Aewit Elog Asaf

Condition: new, Year of construction: 2024, Gildemeister 20ACN allows, again via SIEMENS operator panel, to set and change spindle rpm, cycle time and thread speed easily. It can machine workpieces up to 25 mm in size with equal ease and precision. It offers the possibility of mounting NC slides. Position 6 consists of: NC parting slide and NC take-up slide, NC take-up spindle with variable rpm, Laodeuqh Ihspfx Ag Asf with synchronization and stop. The NC take-up spindle, specifically programmed, has the option of becoming a C-axis. Technical data: - Max. round bar diameter mm 20 / 25 - Max. square bar diameter mm 17 - Bar pusher mm 100 / 125 - Front spindle stroke mm 86 - Longitudinal guide block stroke mm 50 - Radial slide stroke mm 42 / CNC 50 - Axial slide stroke mm 50 / CNC 56 - CNC cutting stroke mm 42 - CNC pickup slide stroke mm 42 - CNC Pickup Spindle Stroke mm 100 - Continuous spindle speed rpm rpm 420 - 5,000 - Rapid traverse times s 0.5 - 0.7 - Main drive power 11 kW / CNC 15 kW - Installation area without bar guide mm 4,000 x 1,900 - Net weight kg 5,500 The Gildemeister 20AC, on the other hand, is a multispindle lathe that targets highly specialized industries where precision and accuracy are imperative.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 10,975 h, functionality: fully functional, spindle speed (max.): 5,000 rpm, center width: 600 mm, center height: 340 mm, controller model: Siemens Sinumerik 840D SL, TECHNICAL DETAILS Maximum turning height: 340 mm Turning diameter over bed: 680 mm Turning diameter over slide: 565 mm Distance between centers: 600 mm Spindle bore: 65 mm Spindle speed: 0–5,000 rpm Travel in X-axis: 260 mm Travel in Y-axis: 635 mm MACHINE DETAILS Laodpfxozuwx Dj Ag Ajf Control system: CNC Controller: Siemens Sinumerik 840D SL Power: 25 kW Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,500 x 2,300 mm Weight: 6,500 kg Operating hours: 10,975 h EQUIPMENT Documentation CE marking CE certificate

Condition: good (used), Year of construction: 2009, Parts shown by hand not come. Technical details are shown on pictures. Laedpfxjzlbzqo Ag Aef

Condition: good (used), Year of construction: 1984, functionality: fully functional, Swing diameter over bed: 560 mm Swing diameter over cross slide: 250 mm Spindle bore: 65.3 mm Max. power: 15 kW Speeds: 11.2 - 2,240 rpm Distance between centers: 1,000 mm Quill diameter: 80 mm Quill taper: MT 5 Including chip conveyor Including complete documentation Laodjvn Rlzopfx Ag Ajf Immediately available from stock

Condition: ready for operation (used), Year of construction: 2001, operating hours: 60,837 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 635 mm, spindle motor power: 28,000 W, total width: 1,750 mm, overall weight: 5,700 kg, controller manufacturer: HEIDENHAIN, number of axes: 4, This 4-axis Gildemeister CTX 400 twin was manufactured in 2001. It features a maximum swivel diameter over bed of 570 mm and a maximum turning length of 635 mm. The machine is equipped with a Heidenhain CNC Pilot control system and offers a speed range of 25 – 5,000 min⁻¹. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 twin horizontal turning machine we have for sale. Contact us for further details. Lajdpezvxkdjfx Ag Ajf - Maximum swivel diameter over bed: 570 mm- Maximum swivel diameter over cross slide: 420 mm- Max. turning length: 635 mm- Bar diameter (main and counter spindle): 65 mm- Chuck diameter (max.): 250 mm- Speed range: 25 – 5,000 min⁻¹- Drive power (main spindle): 28 / 21 kW (100% / 40% duty cycle)- Max. torque (main spindle): 320 / 240 Nm- Drive power (counter spindle): 12 / 9 kW- Spindle bore: 79 mm (spindle bearing 120 mm)- C-axis: Available (for main and counter spindles / C-axis operation)- Control system: Heidenhain CNC Pilot- Machine width: approx. 1,750 mm (without auxiliary units such as chip conveyors)- Operating Hours: 60,837 h- Voltage: 400 V / 230 V / 24 V- Power: 44 kVA- Frequency: 50 Hz- Current: 64 A / 80 A- Included Accessories: 2x jaw chucks, 2x clamping chucks, soft jaws, base jaws, various collets (RD65, RD80, E185, E173, etc.), reduction tubes, chip conveyor (Bürener Maschinenfabrik), cooling unit/filter system, slotting unit (Hub 32), complete documentation manuals Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,229 h, spindle speed (max.): 10,000 rpm, bar diameter (max.): 20 mm, controller manufacturer: FANUC, controller model: 310i-S, number of axes: 8, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Specification • Mechanical and electrical preparation for fire extinguishing system • Coolant system suitable for oil (max. 32 cSt) and emulsion • Coolant tank capacity: 600 liters • Coolant filtration: 50 µm • Coolant chiller unit • Coolant pump pressure: 8 bar • Coolant pump pressure: 20 bar • Chip conveyor • Chip discharge height: 1250 mm • Bar loader: IEMCA Boss 332E • Maximum bar length: 3 m • Oil mist separator: Bristol B270/E • Sliding headstock travel: 80 mm • Tooling on slides Ljdpfxex D H I Ts Ag Aeaf • Tool breakage detection system • Machine commissioning (max. 3 days) • Spindle bore: 25 mm (upgraded) • Chip discharge height: 1250mm Technical Specification Counter Spindle Yes

Condition: used, Year of construction: 2005, Technical details: swing diameter: 320 mm control: 840 D SIEMENS turning speeds: 5000 1/min spindle drive: 20 / 27 kW chucking diameter: 250 mm travel -x axis: 650 mm travel -z axis: 300 mm Lajdpfxomcibwe Ag Asf turret head: 12 Pos. tool holder: VDI 40 toolpiece turning speed range: 4000 1/min work piece power: max. 11,7 kW weight of the machine ca.: 8 t CNC vertical lathe, live tools, C-axis, high pressure pump 20 bar, 500l, filter, flush gun, 3-jaw chuc, EWAB loading station right, chipconveyor, approx. 23.500h "machine on", approx. 8.000h "spindle on" (in total) MACHINE WILL GET NEW (OVERHAULED) SPINDLE (0 hours) *

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,000 mm, turning diameter over cross slide: 350 mm, TECHNICAL DATA Turning diameter: max. 465 mm Ledpfx Aov Epzvjg Aoaf Turning length: 1050 mm Diameter when turning: 680 mm Chuck diameter: 325 mm X-axis travel: 300 mm Z-axis travel: 1050 mm Control system: Fanuc Series 21I-TB Spindle speed range: Max. 3500 rpm Drive power: 33 kW Torque: max. 630 Nm Bearing diameter in the spindle: 120 mm Max. bar diameter: 90 mm Tailstock stroke: 850 mm Tool post stroke: 150 mm Rapid traverse X/Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Accessories: Chip conveyor Tool holders, chuck jaws

Condition: used, Year of construction: 2003, turning diameter 210 mm turning length 580 mm Laedpfx Agjtqmmuo Ajf control 840 D Siemens centre height 190 mm turning diameter over bed 330 mm turning dia. over face-slide 260 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 10 / 7,5 kW max. Torque 115 / 86 Nm spindle bore 68,5 mm max. usable bar diameter 51 mm C - Axis 0,001 ° travel -x axis 185 mm travel -z axis 455 mm number of toolpositions 12 pos. tool taper VDI 30 Driven Tool Stations: 6 pos. tailstock adjustment 400 mm intake pressure max. 4.000 N rapid traverse X: 20 / Z: 30 m/min Feed force ( X / Y / Z ) 4,5 kN total power requirement 21 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 8,0 x 2,2 x 2,0 m CNC Turning- and Milling Center GILDEMEISTER - CTX 310 V3 - incl. 2x reduction tubes

Condition: used, Year of construction: 2008, control Siemens 840D powerline swing diameter 640 mm turning diameter 640 mm spindle distance 1.930 mm x1 axis 550 mm y1-axis 220 mm z1 axis 1585 mm b-axis 240 ° x2-axis 225 mm z2-axis 1.400 mm z3-axis 1.500 mm chuck diameter 250 - 400 mm bar material dia. 90 mm spindle head 220 h5 spindle bore diameter 107 mm diameter in the front bearing 150 mm chuck diameter 400 mm bar material dia. 90 mm spindle head 220 h5 spindle bore diameter 107 mm diameter in the front bearing 150 mm turning speeds 3.200/4.000 U/min tool taper HSK63-A spindle tunring speed 12.000 U/min drive capacity - main spindle 100/40% ED 13,2/22 kW Torque (100% ED / 40% ED) 60/100 Nm bearing diameter 80/55 mm Number of working hours ca. 96.571 h spindle hours ca. 43.720 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Ljdpfx Agezupqrs Asaf Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 2003, Technical details: turning diameter: 640 / 400 mm turning length: 1500 mm control: Siemens 840 D Powerline Travel turret No.1 (milling spindle) x/y/z: 550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis): ±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/24/60 m/min Lodpfx Aeyv Dnkeg Aeaf RPM milling spindle: 12000 1/min power capacity - milling spindle: 12 / 23 kW Torque of milling spindle: 100 Nm Tool magazine for milling spindle (turret 1): 120 HSK-A 63 Tool change time tool/tool, milling spindle: 1,6 s Spindle 1 RPM: 4000 1/min Spindle 1 power: 36/ 45 kW Spindle 1 Torque: 730 Nm Spindle 1 max. bar diameter: 90 Spindle 2 RPM: 4000 1/min Spindle 2 power: 36 / 45 kW Spindle 2 torque: 730 Nm Spindle 2 max. bar diameter: 90 c-axis: 0,001 ° Travel turret 2 x: 225 mm Travel Turret 2 z: 1595 mm RPM of rotary tools turret 2: 4000 1/min no. of tools in turret 2: 12 VDI 40 high-pressure pump: 20 bar total power requirement: 110 kVA weight of the machine ca.: 24 t dimensions of the machine ca.: 9,3 x 4,6 x 3,1 m Accerories Chip conveyor Automatic door High performance turning and milling center with milling head (X, Y, Z, B-Axis), tool magazine with 120 pos. HSK-A 63. Excellent for manufacturing excentric parts. Coolant system with 1000 l tank and coolant system 4 kW. Both spindles have differencial pressure clamping system Steayrest for lower turret dia 8-101 mm. Parts gripper for turret No. 2 with 3-jaw chuck for parts with max. dia. 140 mm. Conveyor belt for finished parts. Preparation for 3D-probe Toolmonitor Artis Machine can be shown under power. *

Condition: used, Year of construction: 2007, Technical details: turning diameter: 160 mm turning length: 300 mm control: Siemens 840D Spindle 1 Power: 22 kW Spindle 1 RPM: 5000 1/min Spindle 1 max. bar diameter: 65 Spindle 1 Torque: 150 Nm Spindle 2 power: 16,8 kW Spindle 2 RPM: 5000 1/min Spindle 2 torque: 100 Nm Travel for pick up of 2nd Spindle: W2=690 mm dimensions of the machine ca.: ´4,5x2,0x2,3 m weight of the machine ca.: 9 t Lasdjzd Tcwopfx Ag Aof Accerories Spindle 1 Collet chuck Spindle 2 Collet Chuck Chip Conveyor Parts catcher CNC turning center with 3 turrets with rotary tool drives and 2 spindles. There is an internal coolant system for the turrets with individual pumps *

Condition: excellent (used), Year of construction: 2005, Gildemeister GLD25 Laodpfx Agszvpaio Aof Machine in very good operating condition. It can be inspected at any time during production. Only 10,800 operating hours.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 58,132 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 635 mm, spindle motor power: 21,000 W, total height: 1,700 mm, total width: 1,700 mm, overall weight: 5,700 kg, controller manufacturer: HEIDENHAIN, controller model: CNC PILOT, product length (max.): 3,565 mm, workpiece diameter (max.): 420 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 1999. This Gildemeister CTX400 Serie2 features a maximum turning diameter of 420 mm and a distance between centers of 600 mm. It includes a disc turret with 12 tool stations and a maximum spindle speed of 5000 rpm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX400 Serie2 machine we have for sale. Contact us for further details. • Control Unit Brand: HEIDENHAIN • Control Unit Model: CNC PILOT • Distance Between Centers: 600 mm • Swing Over Bed: 570 mm • Swing Over Cross Slide: 470 mm • Maximum Turning Diameter: 420 mm • Spindle Nose: DIN 55026 Flat Flange Size 170h5 • Front Bearing Diameter: 120 mm • Spindle Bore: 79 mm • Maximum Chuck Diameter: 250 mm • Maximum Torque: 320 Nm • Turret Type: Disc Turret • Tool System: VDI 20/20 • Tailstock Taper: MK4 • Tailstock Quill Diameter: 80 mm • Tailstock Quill Travel: 550 mm • Feed Drive X-Axis: 3.3 kW • Feed Drive Z-Axis: 3.3 kW • Lubrication Pump Power: 0.1 kW • Coolant Pump Power: 1.4 kW • Hydraulic Pump Power: 1.5 kW • Rapid Traverse X-Axis: 24000 mm/min Lasdpozufq Iefx Ag Ajf • Rapid Traverse Z-Axis: 20000 mm/min • Feed Rate: 0.025–7000 mm/min • Thread Pitch Range: 0.025–3500 mm/min • Coolant Tank Capacity: 100 L • Power Supply: 400 V • Frequency: 50 Hz • Connected Load: 44 kVA • Rated Current: 64 A • Control Voltage: 24 V • Operating Hours: 58,132 h • CE Certified • Scope of delivery as shown, including 3 internal clamping heads • Configuration as shown: VDI30 disc turret Optional Equipment: • Tailstock • Chip conveyor Technical Specification Counter Spindle No Driven Tools No

Condition: excellent (used), I have a GILDEMEISTER CTX600E V3 CNC lathe with powered tool drive for sale. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX600E V3 Control System: Heidenhain 3190 Country of origin: Germany Year of manufacture: 1998 The machine is fully equipped with fixed, powered tool holders, as well as many soft and hard jaws. Machine parameters: Laodpfszu Df Rex Ag Asf - Turret: 12 tools in VDI-50 holders (6 powered tool slots) - Max. speed: 3600 rpm - C-axis - Powered tools - Hydraulic tailstock - Tool measurement probe - Max. turning diameter, X-axis = 500mm - Max. turning length, Z-axis = 1000mm - Cooling system - Hydraulic 3-jaw chuck, 400mm - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 9 tons - Loading is included in the price The machine has undergone a complete inspection. It is in 100% working order, connected, and ready for operation. Stal-Com has been involved in the sale, service, and training of CNC machines from the DMG group for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers in Poland but also by customers from all over Europe and parts of Asia. Each machine can be inspected during production, as we also offer machining services. After purchasing a machine from our company, we provide training for the staff and can also set up production of parts at the customer's location. We cooperate with many companies on an ongoing basis, supplying them with new machine tools.

Condition: excellent (used), For sale: GILDEMEISTER CTX 410 V3 CNC LATHE with driven tools TECHNICAL & VISUAL CONDITION: Very Good Lsdpfx Aozu Dfqjg Aoaf Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V3 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2006 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 positions for VDI-30 tool holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Tailstock - Max turning diameter (X-axis): 320 mm - Max turning length (Z-axis): 600 mm - Coolant system - Hydraulic collet chuck on the main spindle (can be replaced with 3-jaw chuck) - Main spindle with through-hole (bore diameter: 66 mm) - Finished parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5 tons - Loading included in the price The machine has undergone a complete inspection. Fully operational and ready to work—currently connected and available for demonstration. About the company: Stal-Com has been trading, servicing, and providing training on DMG Group CNC machines for over 20 years. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. Every machine undergoes a thorough technical inspection. We supply not only customers in Poland, but also across Europe and parts of Asia. Each machine can be inspected live in production, as we also provide subcontract machining services. After purchase, we provide operator training and can help set up production at the customer’s facility. We work with many clients under long-term partnerships, supplying additional machines as needed.