Used Malt for sale (26)

Condition: used, Year of construction: 2013, 2-roller mill with grist bin and 2 pipe chain conveyors. Malt extraction and milling capacity approx. 500 kg/h, malt milling transport capacity for mashing approx. 1000 kg/h. Additional title: with grist bin and pipe chain conveyors Ncjdpfow Tdygsx Alhju Malt transport capacity approx.: 500 kg/h Malt mill capacity approx.: 500 kg/h Maltgrist transport capacity: 1000 kg/h Maltgrist bin capacity approx.: 450 kg Position: Installation at ground level, mill on top of the grist bunker Features: 1 pipe chain conveyor from the silo to the grist mill, 1 pipe chain conveyor from the grist bunker to the mash tun, 1 malt grist mill, 1 grist bunker

Year of construction: 2016, condition: used, Malt milling with 4-roller grist mill. Additional title: with 4-roller grist mill Capacity: 4 t/h Operation / Control: Siemens Simatic S7-300 Features: 3 x silo discharge, small; 4 x silo discharge, large; malt transport; blower; malt scales; malt conditioning; malt mill, 4-roller; control cabinet and control system Nodpfx Ajw Tmtvslhjcu

Condition: good (used), total width: 3,500 mm, total length: 19,000 mm, total height: 2,100 mm, workpiece weight (max.): 6,000 kg, grinding diameter: 850 mm, grinding length: 6,000 mm, center height: 425 mm, Cylindrical grinder Schmaltz - RM 82/6000 MACH-ID 9492 Make: Schmaltz Type: RM 82/6000 Centre height: 425mm Grinding Ø: 850mm Grinding length: 6000mm Grinding stone dimensions:1100 x 80 x 560mm Grinding stone speeds: 700Rpm Table inclasement: -5 to +5° Tailstock: 160 x 100Mk Length: 19000mm Width: 3500mm Nedey Dr Eajpfx Alhscu Height: 2100mm Weight: 31000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1954, diameter 400 x 3.100 mm Nods A Dkispfx Alhjcu

Condition: used, Year of construction: 1952, workpiece length 5000 mm swing dia. 1100 mm clamping length 6000 mm grinding diameter 1100 mm grinding wheel diameter 1300 mm workpiece weight 2500 kg main drive motor 22 kW crankshaft bearing diameter 275 mm steady 100-250 mm speeds of tool 400/500 U/min workpiece turning speeds 20-40 U/min weight of the machine ca. 30 t 13 Grinding Steady Rests Mandrels Mounting Flanges Clamping Devices The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Nedeyt Rxvopfx Alhjcu We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), SILOMAT for silos FREE FALL type or PRESSURE TYPE. For plastering machine or other use. /dozens of pieces/ Njdpfx Aolf Niqolhjcu We have also for sale about 200 transportable silos (free fall or pressure type). Sales in Poland (BIESLKO BIALA lub OLSZTYN) or Italy (RIMINI). KNAUF, BAUMIT, PFT, M-TEC, MALTECH, MIXER, PUTZMEISTER, mortar, plaster, cement, silos, silo, silomat, silomats

Condition: used, Year of construction: 1961, grinding diameter 420 mm grinding length 2500 mm swing diameter 870 mm centre distance 2700 mm workpiece turning speeds 1-164 U/min total power requirement 50 kW The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Njdpfx Aleyqvt Hehscu If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5.5 kW, -45/+45° tiltable, electric height and swivel adjustment Left/right, 6 speeds Aigner fence 2 x 500 mm, Njdpfx Aloykar Hehjcu digital readout on the spindle fence, table 2500 mm x 780 mm, mechanically programmable spindle fence with two displays, system for quick removal from the worktable New price: €18,700 Available around September 2026 Shipping available at extra cost!

Condition: new, Technical data: Spindle diameter: 35 mm Spindle height: 140 mm Revolutions: 1300/2500/3500/5000/6000/8500 rpm electric spindle height adjustment Spindle lock Working table dimensions: 700x1200 mm Adjustable culagi arms Engine power: 4 kW Power supply: 380 V Ncsdpfx Alohp N Nbshou Producer: Paoloni Overall dimensions: Length: 1,200 mm Width: 850 mm Height: 1340 mm

Condition: ready for operation (used), A good used Thermal Transfer overprinter from Open Date Equipment Ltd - model 107L - intermittent motion TTO with a large print area of 107 x 160mm - complete with frame power supply - keyapd - software and cables. Nodpeyg Nluefx Alhocu Manuals available Ready to ship worldwide Export documentation available Request additional images and videos via Whats App

Condition: used, Year of construction: 2016, Overview  This complete 500 L brewhouse package was manufactured between 2016 and 2017 by leading European companies, including Speidel, Spagni, Skrlj, Sommer, and MTA IT. Designed as a turnkey solution for small to medium-sized breweries, it includes all key equipment for mashing, fermentation, chilling, capping, labelling, and malt processing. The system was previously operating at 600 bph and can be adapted for up to 900–1,000 bph. It is offered for sale as the brewery has ceased operations and is immediately available. Technical Details  Brewhouse capacity: 500 L (Braumeister 500 L, atmospheric) Fermentation capacity: 4 × 625 L (total 2,500 L) Formats: 26 mm crown caps (adaptable to 29 mm) Labeller type: Self-adhesive, semi-automatic, for cylindrical bottles Malt mill capacity: 150 kg/h Chiller: MTA TAEevo TECH 015, 3.8 kW, refrigerant R410A Production speed: 600 bph (adaptable to 900–1,000 bph) Electrical connection (brewhouse): 230/400 V, 32 A, 50/60 Hz, IP43 Scope of Supply  Speidel Braumeister 500 L brewhouse (2017) 4 × Speidel 625 L fermentation tanks (2017) Spagni Aircorona 26/29 FE pneumatic crown capper (2017) Skrlj E03 180 semi-automatic labeller (2017) Sommer Maltman 110 malt mill (2017) MTA TAEevo TECH 015 process chiller (2016) Additional equipment: crane, manual filler, air compressors, sugar mixer tank, transfer pumps Ncedpfx Aow Nk Ezelhju

Condition: used, Year of construction: 2012, Overview This craft brewery system was manufactured in 2012 by Slowbeer and other manufacturers. The system is designed for beer production and includes brewhouse, fermentation vessels, milling equipment, and temperature control units. The machines are described as in very good condition with low operating usage. Technical data Capacity: 250 L brewhouse Application: Beer production Configuration: Brewhouse, multiple fermenters, malt mill, heating and cooling unit Scope of Delivery  Brewhouse | Slowbeer | MB 250E | 2012 | 250 L brewhouse system Fermenter | 2012 | 500 L stainless steel fermenter with CIP system Fermenter | 2012 | 2 × 1,200 L isobaric conical fermenters Fermenter | 2012 | 1,200 L isobaric flat-bottom fermenter Malt mill | Sommer | Piccolo 11S | 2012 | Capacity 100–150 kg/h with support frame and hopper Heating and cooling unit | Winus | Model M | 2012 | Control unit with 4 digital thermostats for up to 10,000 L Pump | 2012 | Transfer and cleaning pump with inverter Ncedsy Sic Sjpfx Alhju

Year of construction: 2013, condition: used, Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fermentation and storage tanks is controlled by a common control cabinet. In addition, there are 2 further cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 14.7 hl each and a maximum pressure of 3 bar. The temperature of these two cylindroconical fermentation and storage tanks is controlled by another control cabinet. 4. Pressure tank cellar / serving cellar 5 upright pressure tanks (Kaspar Schulz, 2013) with clamp heads, each with a gross capacity of 10.5 hl and a maximum pressure of 3 bar. 5. Filling room Siphon filler/glass bottle filler (JS Maschinen) with 6 filling heads. Keg interior and exterior washer (Scheuer) with spray nozzles in stainless steel housing and lye tank in the base. Keg filling station with taps for direct filling of kegs from the pressure tanks. 6. Operating/supply technology Refrigeration system (Hafner-Muschler, 2013) as an ice water storage system with R404a refrigerant and 3 refrigeration compressors. Oil-free compressed air piston compressor (Kaeser, 2013) with a maximum operating pressure of 10 bar and compressed air refrigeration dryer (Kaeser, 2013). Air separator (AST) as nitrogen generator with adjacent nitrogen pressure tank. Additional title: complete brewing plant with copper-clad brewhouse Cast wort capacity: 10 hl Ncedpfxjy Nm I Ho Alheu Features: grain mill, malt transport system, 2-unit brewhouse made of stainless steel (copper clad), wort cooling, hot water tank, 9 fermentation tanks (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), pressure tanks (5 x 10.5 hl), siphon filler, keg washing system, keg filling station, compressed air system, refrigeration system, N2 generator,

Condition: used, Brewing plant with a wort output of 20 hl, consisting of the following components: 1. grist plant (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hull, floor scales, grist conveyor and control cabinet 2. 3-device compact brewhouse with insulated stainless steel vessels with copper bonnets, spindle station and control cabinet 3. fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tank (Joh. Albrecht, 1999, 44 hl, 0.99 bar) and 6 x storage tank (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4th pressurised tank cellar with 2 x pressurised tank (Speidel, 2021, 86 hl, 3 bar), 1 x pressurised tank (INOX, 2018, 67 hl, 3 bar) and 4 x pressurised tank (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17-20 kegs/h) 6. refrigeration system as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) 7. steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-heated) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with switch cabinet Interested in only part of the system? The system is offered as a consignment sale. A partial sale might be possible – feel free to contact us and submit your offer. Additional title: cast wort volume 20 hl, years of manufacture 1997-2001 Ncsdjwgc Udepfx Alhsu Cast wort capacity: 20 hl Features: Grist system; 3-device compact brewhouse; fermentation vats; fermentation, storage and pressurised tanks; keg system; refrigeration system; steam generator, warm water tank, CO2 liquid gas tank

Year of construction: 2019, condition: used, consisting of: - Malt milll - Mash-/Wortkettle/Whirlpool - Lauter tun - Warmwater vessel - Wort cooler - Wort aeration - Siemens touch screen - 4 x Fermenting vessel - 8 x Storage tanks with shell cooling surface - Icewater vessel - mobile beerpump - Steam boiler - 2 Bottle-filler + 1 Can-filler by Fillmatic - bottle filler A. Gruber Additional title: 5 hl-Brewery, with Grist Mill, Compact-Brewhouse, Fermenting vats, Storage tanks Cast out wort: 500 l Capacity wort cooler: 750 l/h Wort cooling time: 40 min. Ncjdpfsvcqk Hex Alhju Material: Brewing vessel, hotwater tank, fermenting and storage tanks in stainless steel, 1.4301 Base construction: Brewhouse compact unit on stainless steel frame, vertical Fermenting vats on feet, horizontal storage tanks on two layer in a stainless steel frame. Features: mobile grist mill, mash-/wortkettle, lauter tun, warm water tank, wort-cooling and aeration, 4 fermenting vats, 8 storage tanks with temperature control, pumps, hoses, bottle- and can-filler, bottle-washer, ice water tank, steam generator

Condition: used, Year of construction: 2013, Overview  This brewhouse system with malt mill and plate heat exchanger was manufactured in 2013 by Spanish company Slowbeer. The system consists of a 2‑vessel brewhouse (mash tun and boil kettle), a malt mill, and a plate heat exchanger, designed for complete brewing processes including mashing, boiling, and whirlpool. Technical data  Capacity: 250 liters per batch Application: Brewing Configuration: 2-vessel brewhouse (mash tun + boil kettle), complete brewing process (mashing, boiling, whirlpool) Heating system: Electric Temperature control: Automatic Safety system: Thermal safety alarm Cooling: Plate heat exchanger Electrical supply: 400 V, three-phase Installed power: 15 kW Scope of Delivery  Brewhouse (2 vessels) | Not provided | MB 250 E | 2013 | Mash tun and boil kettle, electric heating, automatic temperature control Plate heat exchanger | Sondex | S4A-IG16 | 2013 | Transmission surface: 0.63 m², Design pressure: 10 barg, Volume: 1.5 L, Design temperature: 0 – 100 °C Malt mill | Sommer | Piccolo 11S | 2013 | Capacity 100–150 kg/h Ncedpfxoyw Abfe Alhju

Condition: ready for operation (used), functionality: fully functional, Up for auction is a complete brewery and bottling line comprising: - Brewery plant (including brewhouse, fermentation and storage tanks, and additional accessories) - Bottle filling line TECHNICAL DETAILS BREWERY PLANT Brewhouse Manufacturer: Shandong Year of manufacture: 2019 Nedpfowxw U Nex Alhscu Capacity: 20-25 hl Components: mash tun, lauter tun, kettle/boiling wort kettle, whirlpool Valves: manual shut-off valves Wort cooler: 2-stage Hot water tank: included Fermentation and Storage Tanks Fermentation tanks: 6 units of 2,760 l each (CCT tanks) Year of manufacture: 2019 Insulation: included, with jacket cooling Operating pressure: 3 bar CIP-capable: yes Storage tanks: 12 units of 2,760 l each (horizontal tanks) Year of manufacture: 2019 Operating pressure: 3 bar Additional Equipment Malt mill: Shandong, 2019 Steam generator: Yano, Shanghai, 2019, output: 200kg/h, oil-fired Chillers (glycol): 2 units of 28 kW each, 2019 Glycol tank: included Reverse osmosis system: included Compressor: JAN, 585 l/min, 2020 KEG Filling KEG washer: with automatic caustic replenishment and steam heating KEG filler: up to 70 kegs/h Control: Siemens S7 Fitting: Type S (basket fitting) BOTTLE FILLING LINE Bottle washing machine: SEN Year of manufacture: 1989, overhauled & installed 2020 Output: max. 1,500 bottles/h Isobaric filler block: Shandong Yuesheng, 2019 Stations: 14 rinsing, 12 filling, 5 capping stations Technology: with pre-evacuation and counter-pressure filling Format parts: for 0.33 l longneck & 0.5 l NRW bottles Dry tunnel: Shandong Yuesheng, 2019 Labeller: with laser printer Collection table: included

Condition: ready for operation (used), Used stainless steel tank with double jacket Last use: Food processing TANK HAS BEEN CLEANED! Item number: 10247 Volume: approx. 400L Type: Standing on legs Material (in contact with media): 1.4301 / AISI304 Design: Double jacket Bottom: Dished bottom Top: Flat bottom with hinged lid Operating pressure according to nameplate: ATM Tank dimensions: Tank diameter: 930mm Cylindrical height: 450mm Overall height: Approx. 1220mm Height of legs: 480mm Materials: Ncodped A Tt Ajfx Alhou Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Double jacket around cylinder and bottom Various connections Hinged lid Agitator mount Nameplate

Condition: used, Year of construction: 2012, Overview  This brewhouse and utilities package was manufactured between 2001 and 2023 by European manufacturers including Slowbeer, GG-Technik, Lavor, Sommer, Quantor and others. The package centers around a 500 L brewhouse and includes steam generation, milling, cooling, compressed air and transfer pumps. Personal inspection is possible, Technical data  Brewhouse capacity: 500 L Configuration: 3 kettles + hot water tank + cold water tank + boiler Steam heated Cooling capacity: 35.8 kW Scope of Delivery  Brewhouse | Slowbeer | MB-500MAN | 2012 | 500 L, incl. tanks & boiler Steam Generator | GG-Technik | TD9 | 2016 | 5 kW Steam Generator | Lavor | GV Vesuvio | 2014 | 18 kW, serviced 2025 Malt Mill | Sommer | Piccolo 11 S | 2012 | Grain mill Cooling Unit | Quantor | Q352RHQ | 2021 | 35.8 kW Air Tank | Fiaseis | Coinox | 2023 | 270 L, stainless steel Compressor | CompAir | WinVOM L15 7.5 | 2001 | — Transfer Pump (2x) | Ebara | CDXM-B120-20 | — | Stainless steel Air Dryer | — | E2000 | 2001 | Air drying unit Njdpfx Aleyg R Dljhscu

Condition: used, Year of construction: 2018, Overview  This complete brewhouse and cellar system was manufactured between 2018 and 2021 by several European equipment suppliers including Brewiks, Milan Svoboda, Mercabrewers, Wild Goose, Quantor and others. It features a 5 HL Brewiks brewhouse, a 12 HL fermentation cellar (6 CCTs), CIP stations, a canning line, labelling and coding units, water treatment, air treatment, chiller and full malt-handling equipment, being a turnkey solution for beer production. Technical data  Brewhouse (Brewiks 500, 2018) Capacity: 5 HL Heating: Electric, 36 kW Fermentation Cellar (Svoboda + Mercabrewers, 2018–2021) 6 CCTs × 12 HL useful capacity Pressure rating: 3 bar CIP Stations (Svoboda CIP 100) 2 mobile CIP units Tank capacity: 100 L (alkaline + acid) Canning Line (Wild Goose GOSLING, 2021) Semi-automatic Formats: 0.33 L / 0.44 L / 0.50 L Cooling (Quantor Chilly MAX 50L) Glycol chiller for CCTs General Key Information Power supply (various units): 230–400V, 50 Hz Applications: Brewing, fermentation, can filling Scope of Delivery  Brewiks Brewery (5 HL) | Brewiks | Brewiks 500 | 2018 | Electrically heated (36 kW) Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (1/3) Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (2/3) Isobaric CCT | Milan Svoboda | — | 2018 | 12 HL, 3 bar (3/3) Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (1/3) Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (2/3) Isobaric CCT | Mercabrewers | — | 2021 | 12 HL, 3 bar (3/3) CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (1/2) CIP station | Milan Svoboda | CIP 100 | — | Mobile; 100 L alkaline + 100 L acid (2/2) Hop Cannon + Bag Filter | 3M | Series ME 01MET2 | — | 30 L capacity Glycol cooler | Quantor | Chilly MAX 50L | — | Operational, heavily used Canning line | Wild Goose | Quick Change GOSLING | 2021 | Semi-automatic; incl. formats 0.33 / 0.44 / 0.50 L Can Rinser + Gravity Feeder | Zomerdijk Engineering | TWIST Rinser | — | For 0.33 / 0.44 / 0.50 L Labeler + Printer | EME (Crafted Goose) | Jem-110-S2 | — | Automatic; integrated printer Thermal inkjet printer | Rynan | R20 (CM220) | — | Batch and date printing Air compressor | ABAC | 50 Hp2 | 2020 | 10 bar; 50 L tank Dehumidifier | ABAC | COOL21 (CO) | — | 16 bar; 350 L/min Reverse osmosis system | AquaControlada | — | — | 2 units (drinking & process water) Water tank | ROTH | — | — | 2× 750 L Malt mill | Sommer | Maltman 220 | — | Precision mill Sieve shakers + sieves | RETSCH | AS200 Basic | — | Complete sieve set for malt analysis Ncedpfxjyb R Iae Alhsu

Condition: used, Year of construction: 2013, Overview The brewhouse, including fermentation and storage tanks and a KEG washer, was built in 2013 by the Austrian manufacturer Flecks. The whole equipment is in a very good condition and can be visited. Equipment Mash and brew kettle incl. whirlpool function, agitator, stainless: 1.000 L net Lauter tun, stainless: 1000 L net Calandria system (outdoor cooker), electrical heating, stainless. Integration of existing gas, heating + electrical: 72 kW Vapour-condensation system Whirlpool- system Mash and wort pump: 2,2 kW Hot water tank with electrical heating, stainless: 1000 L, 9 kW Wortcooler GEA 2-stages pT 100, electron. Thermometers Incl. all pipes, fittings, valves in stainless. Full automation upgrade: electrical switch board for full automatic process control switches, fuses: 100 kW Main connection 400 V Emergency switch PC-databus and modem Visualisations and automation software "BRAU-MANAGER" 2x cooling units 2x cooling water pumps 1x 2,000L fermentation tank: 2 outlets, cooling jacket, insulation, stainless cladding (for main fermentation) 4x 2,000L pressure tanks horizontal: 3 bar, incl. cooling jacket, insulation stainless cladding for secondary fermentation and ripening + as serving tanks) 4x 2,000L pressure tanks vertical: 3 bar, incl. cooling jacket, insulation stainless cladding (for fermentation and ripening + as serving tanks) 1x CIP-cleaning agent tank 1x beer- and CIP pump: 0,75 kW 3x beer hoses, food quality 1x malt mill, 2 rollers with motor: 1,5 kW 1x KEG cleaning equipment (10 pcs/hour) 1x Main compressor Njdpfouzbb Dsx Alhjcu

Condition: used, Year of construction: 2019, Overview This complete brewhouse including fermentation and storage cellar and KEG filling was installed in 2019 and largely built by the Chinese manufacturer Shandong Yuesheng. The scope of delivery includes various equipment necessary for operation. The brewhouse will become vacant as the previous owner is closing the brewery due to retirement. The brewery ran smoothly until the end. The equipment is still set up and connected and can be viewed in person at any time. Scope of delivery 4 units Brewhouse | Shandong | 20-25HL | 2019 1x mash tun 1x lauter tun 1x boiling or wort tun 1x whirlpool Manual shut-off valves Cooling of fermentation tanks is automated Malt mill | Shandong | 2019 Steam generator | Yano (Shanghai Yano Boiler Manufacturing Co. Ltd) | 2019 200 kg/ h Oil-fired, but can also be operated with gas by replacing the burner Wort cooler, 2-stage | Shandong | 2019 2x cooling unit (glycol) | 2019 2x 28kW Glycol tank Hot water tank 6x Fermentation tanks | 2760l | 2019 3 bar, insulated with jacket cooling, CIP capable 12x Storage tank | 2760l | 2019 3 bar, no cooling, were in a separate cold room Reverse osmosis Compressor | JAN | 585l/ min | 2020 KEG filling 1x drum washer with automatic caustic refill and steam-heated 1x keg filler Up to 70 barrels/ h, Fitting: Type S, basket fitting, Siemens S7 Dismantling and loading are included in the price Also available for purchase: refrigerated containers, dispensing systems, KEG kegs, etc. Ncodpfx Ajyb N N Ajlhou

Condition: used, Year of construction: 2012, Overview  This 20 hL brewhouse was manufactured in 2012 by Schwarzenbeker. It is a 2-vessel system (Mash/Boil + Lauter/Whirlpool) with a net capacity of 18–19 hL and a maximum mash load of 600 kg. The brewhouse is steam-powered with a double steam jacket and PLC-based automation, offering recipe management and precise process control. It is in generally good condition, though a minor review is recommended. The package also includes a biomass steam generator (Teivy, 2012), a malt mill (Robix, 2012), and a plate filter (Cespedes, 2013). Technical data  Capacity: 20 hL gross / 18–19 hL net Configuration: 2-vessel system – Mash/Boil + Lauter/Whirlpool Max. mash load: 600 kg Average efficiency: 83% Average lautering time: 2 hours Heating system: Double steam jacket (lateral + bottom, independent) Max. pressure: 3 bar Automation: Touch-screen PLC, VFD for pump/agitator/cutter, temperature control, programmable mash recipes Monitoring: PT100 temperature probes in Mash/Boil and heat exchanger outlet CIP: Spray balls in Mash and Lauter vessels Safety: Pressure relief valve in Whirlpool Other features: Auger feed connection, operation manuals included Scope of Delivery  Brewhouse | Schwarzenbeker | 20 hL Brewhouse | 2012 | 2-vessel system, steam-heated, PLC automation Steam Generator | Teivy | Biomass Steam Generator | 2012 | Pellet-fired, fully functional Malt Mill | Robix | Roppi-1100 | 2012 | Incl. metal detector magnet Plate Filter | Cespedes | – | 2013 | 50–98 plates, adaptors included, no pump   Nedpfx Asyb S Egslhocu

Condition: used, Year of construction: 2018, Overview  This semi-automatic 20 hL brewing system was manufactured in 2018 and is equipped with a steam-powered heating system. It includes a complete brewhouse, a steam generator, a CIP station, fermentation tanks and a KEG cleaning system. Technical details  Wort yield: 20 hL per brew Control: Semi-automatic Heating: Steam Scope of delivery  Steam generator | Certuss | Junior TC-300 | 2018 Capacity: 300 kg/h Including water treatment plant Brewhouse | SKRLJ DOO | BH-3 | 2018 Mash & lauter tun Kettle Whirlpool Hot water tank | 4.586 L | steam heated jacket Cold water tank | 4.400 L | glycol cooled jacket 2 stage heat exchanger Grist bin 500kg Semi-automatic CIP station | SKRLJ DOO | CIP 2x500L | 2018 500 Litre Acid tank 500 Litre Caustic tank insulated, electric heating 1x sanitary centrifugal pump PLC for pump/temperature control Full stainless steel construction Keg washer | SIFA | Idrokeg 21 | 2020 12 KEGs/ h 2 cleaning stations Semit-automatic Steam heated 2x S-Type heads Malt mill | Robix | RX-600 | 2018 Capacity: 600 kg/h   Nedpevy U Drefx Alhecu

Condition: used, Year of construction: 2020, Overview  This complete microbrewery system was manufactured in 2020 by German company Sudhausbau GmbH. The installation is a 5 hl, steam-heated, two-vessel brewhouse including milling, hot side, control system, steam generator, fermentation, storage, water treatment, cooling and accessories. The system is well maintained and comes with a functional guarantee upon delivery. Technical data  Brewhouse capacity: 5 hl Design: 2-vessel brewhouse Heating: Steam-heated Control: Semi-automatic PLC (Siemens) with touch panel Fermentation: Open fermenters with cooling jackets Scope of Delivery Malt Mill with Stand & Hopper | — | — | 2020 | For brewhouse feeding Brewhouse (Mash/Kettle + Lauter Tun) | Sudhausbau GmbH | — | 2020 | 5 hl, steam-heated, incl. platform & piping Plate Heat Exchanger | — | — | 2020 | Single-stage, stainless steel plates (1.4404) Water Mixing Station | — | — | 2020 | Solenoid valve, mixer, meter Brewhouse Control System | Siemens (PLC) | — | 2020 | Semi-automatic, recipe control Steam Generator | — | — | 2020 | Gas-fired, incl. water treatment, TÜV & CE Open Fermenters (2x) | Speidel | — | — | 625 L each, with cooling jacket Horizontal Storage Tanks (5x) | — | — | — | 500 L each Hot Water Tank | — | — | — | 700 L, insulated, electric heater Cold Water Tank | — | — | — | 700 L, insulated, cooled Water Cooler | — | BL 040 | — | 1.8 kW, cooling & heating function Fermentation Temperature Controllers (3x) | Cube Plug | — | — | — Mobile Pump | — | — | — | — Brewery Accessories | — | — | — | Beer hoses, kegs (30 L & 50 L), misc. parts Optional: Cold Room with Refrigeration Unit | — | — | — | Single-wall, no cooling jacket   Nodpex Nm Sxofx Alhocu