Used Mandrel Tube Bender for sale (3,250)

Condition: used, GENERAL Heat transfer surface: 2.75 m² External diameter: 180 mm Total length: 2,650 mm Other information: Tube diameter approx. 10 mm Location: Bremen Nameplate: Condition: used Previous application: pharmaceuticals INSULATION Chjdpfx Aoxqcm Esbzed Insulation material: stainless steel SHELL SIDE Shell side volume / liters: 4 liters TUBE SIDE Tube side volume / liters: 3 liters Shell material: AISI316 (V4A) 1.4571 Tube material: AISI316 (V4A) 1.4435 Number of tubes: 14 Tube length / mm: 2,500 mm Max. permissible operating temperature shell side / °C: 100 °C Max. permissible operating temperature tube side / °C: 100 °C Max. permissible operating overpressure tube side / bar: 11.0 bar

Year of construction: 2015, condition: new, functionality: fully functional, Automated manufacturing plant for the production of SDR 11 and SDR17 grade tube bends Patented bending system where the ends of the tubes are inserted into the bend radius during bending. This reduces the reduction of the outer wall of the tube during bending and reduces costly material additions to compensate for the loss of wall thickness. Tube bends can be manufactured with a final bend angle of 90°. Variable bend angle adjustment Simultaneous heating of the bending blank in the radiator field Rotation of bending blanks during heating to achieve homogeneous heating The ends are not heated, so their geometry remains unchanged. The bending of the tube can therefore be further processed by conventional butt welding of tubes Automatic transport of semi-finished products from the buffer hopper to the removal of the finished tube bends, depending on customer requirements. Siemens PLC control system with touchscreen user interface Chodpfxeu Itlne Abzed

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 6713-2023-2009, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, total length: 6,500 mm, total width: 1,000 mm, total height: 1,400 mm, power: 5.2 kW (7.07 HP), Tube bending machine Gelber Bieger Type: S03-60 Year of manufacture: 2009 Diameter: 03-60mm Length: 6m Electromechanical drive of the bending axis PLC control Chodpfjxuii Uox Abzod Bending angle resolution: 0.1° Electronic length and torsion measurement Manual stop system with overrun stops Torsion indexing: 15° increments Hydraulic tube clamping with adjustable clamping pressure Programmable mandrel retraction Three-jaw chuck Reinforced mandrel support extension up to 6m Tube bending software Including tooling for the following diameters: 50mm, 42.5mm, 40mm, 35mm, 30mm, 25mm, 20mm Collection ex works, unpacked

Condition: good (used), Profile bending machine, bending machine, pipe bending tool -Handover: in the current condition as viewed -Accessories: 1 damaged pressing tool: 3/4", see photos -suitable for: pipe size 1/2" to 1 1/2" -Dimensions: 630/670/H440 mm Chsdpfxegrzvgj Abzsd -Weight: 36 kg

Condition: used, functionality: fully functional, Motor: 22 kW Fan diameter: 700 mm Length: 2500 mm Codsri R Duopfx Abzshd

Condition: used, We offer for sale an Ercolina Mega Bender 030 in excellent working condition. This machine features semi-automatic numerical controls allowing storage of multiple programs with individual bending angles and springback memory, along with variable bending speed. It is designed for bending pipes and tubing up to 2-1/2" outside diameter or 1½” Schedule 40 pipe. Codsxtvgwepfx Abzohd Power: 220 V-440 Volt, three-phase.

Year of construction: 1984, condition: used, GENERAL INFORMATION Heat exchange area: 8.5 m² Year of manufacture: 1984 Outside diameter: 350 mm Inside diameter: 270 mm Total length: 2,090 mm Insulation: available Other information: 2 tubes of the tube bundle were welded shut by the previous operator; baffle plate in the front head has detached from the weld seam and must be rewelded by the buyer before commissioning (see photos). Location: Bremen Nameplate: Condition: used Previous application: brewery INSULATION Insulation jacket material: stainless steel SHELL SIDE Shell side volume / liters: 54 liters TUBE SIDE Cjdpsxqclzefx Abzjhd Tube side volume / liters: 22 liters Max. allowable operating overpressure shell side / bar: 15.0 bar Max. allowable operating temperature shell side / °C: 170 °C Max. allowable operating temperature tube side / °C: 170 °C Max. allowable operating overpressure tube side / bar: 4.0 bar

Condition: excellent (used), Year of construction: 2012, operating hours: 800 h, functionality: fully functional, overall weight: 4,650 kg, total length: 3,100 mm, CNC control with PROLINK S graphics, powered rear stop SBG 15-30-T-30L-20R, rotating upper beam type COMBI MULTIFOLD, split tool for lower and bending beam including SBG 15 table, height adjustment from 0–46 m, mechanical gap adjustment between the beams, bending beam strip 10 and 20 mm with quick-clamping system for lower beam strip, manual deflection compensation of the bending beam, three-button foot pedal, price for a new machine with the above equipment: 122,900.00 EUR +VAT Cjdpfx Aexfcd Hjbzshd

Condition: excellent (used), Year of construction: 2021, 090 USED Europa Tube Oven. Year of manufacture: 2021 TECHNICAL DATA: - Baking area: 21 sq m, - Number of chambers: 4, - Power: 116 kW EXTERNAL DIMENSIONS (in cm) - Width: 254 cm, - Height: 220 cm, Chsdpfx Abswrb Ugozod - Length: 400 cm. EQUIPMENT: - Charger mounted on the oven. - Gas burner: Elco We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, batch oven, shelf oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 1967, operating hours: 4,336 h, I sell a decent massive pipe bender in very good condition Weight of the bender 4.5T+ about 1T wheels to work. Codeudlymspfx Abzohd

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, Machineseeker – Trumpf TubeLaser 3000 – Ebertz Under 3,000 Laser Hours Fiber Tube Laser – Immediately Available Manufacturer: TRUMPF Model: TruLaser Tube 3000 fiber (T10) Year of Manufacture: 2020 Machine Number: A044D0013 Operating hours, approx.: 2,750 h (Laser on) TECHNICAL DATA: Max. outer diameter round tube: 152 mm (170 mm with jaw set) Max. circumscribed diameter rectangular tube: 170 mm Max. raw material length for automatic loading: 6,500 mm Machine bed for 6.5 m raw material length Max. finished part length: 4,500 mm Max. workpiece weight per meter: 18.5 kg (120 | 148[3] kg total) Laser: TruFiber 2001 – 2 kW (average power consumption 6 kW) Max. material thickness: - Mild steel: 8 mm - Stainless steel: 4 mm - Aluminum: 4 mm - Copper/Brass: 3 mm EQUIPMENT: - Through-feed chuck with self-centering clamping rollers - Workspace lighting - Feed station with self-centering jaws - Tube support (raw material) with automatically retractable rests - Tube support (finished parts) with extendable guide rollers - High-precision drives Csdpfexn Tn Iex Abzjhd - Adaptive clamping technology for through-feed chuck - Eject station for 3 m finished part length (including scrap container) - Parts storage tray TRUMPF Laser • Excitation via pump diodes • Laser power control • Logbook function for laser • Enclosed beam guidance via laser light cable (LLK) Cutting Head • Lens cutting head with 150 mm focal length • Magnetic coupling Controller • TRUMPF controller based on Sinumerik 840D SL • Integrated technology data • Automatic on/off function • Tiltable operator panel with 19" touchscreen • Condition Guide • Remote support interface • Programmable cutting gas pressure Functions • AdjustiLine • NitroLine • FocusLine • ControlLine Data Transfer - Online Update Manager - RJ45 network interface - USB interface - Wireless Operation Point - Central Link Safety - CE Marking (ex works) - Single and dual beam safety light curtains - Monitoring system for gas pressure, temperature, and cooling water - Protective cabin with laser safety windows EXTENDED STANDARD EQUIPMENT: • Solid-state laser TruFiber 2001 • Machine bed for 6.5 m raw material length • LoadMaster Tube for 6.5 m raw material length • Laser chiller (water-air) • Compact exhaust system Machine Accessories • Initial set of cutting nozzles • Ceramic part (1 piece) • Jaw set up to D152 mm/D170 mm • Guide rollers for round and rectangular tubes SPECIAL EQUIPMENT: - Increased finished part length (+1.5 m) including additional finished part support - SeamLine Tube with inner detection, weld seam detection on both inner and outer tube surfaces - Low-scratch LoadMaster Tube design, plastic rollers and strips - Adaptive clamping technology – feed station with additional clamping elements for clamping L and U profiles as well as flat material - MobileControl App This used machine can be viewed under production conditions. All information provided without guarantee – sale excluding any warranties or liability and exclusively in accordance with our General Terms and Conditions of Sale and Contract. Subject to prior sale.

Year of construction: 2017, condition: used, controller manufacturer: SIEMENS, controller model: S7-1500, pipe diameter (max.): 50 mm, pipe length (max.): 1,200 mm, wall thickness: 6 mm, CONTROLS .. PLC SIEMENS S7-1500 FEEDSTOCK TUBE .. external diameter min.: 15 mm .. external diameter max.: 50 mm .. wall thickness min.: 1.8 mm Chedpfxoxm Rzcs Abzod .. wall thickness max.: 6 mm .. length min.: 200 mm .. lenght max.: 1200 mm System consists of: + ITG ITPA 100k150 vertical induction hardening system, YoM 2017 150 kW, 100 kHz + BACHMANN automation cell, YoM 2017 + 2x ABB IRB 4600 handling robots, YoM 2017 load capacity 60 kg, additional arm load 20 kg, reach 2.05 m

Condition: used, GENERAL Remarks: Pipe wall thickness 2 mm (1.7 mm in bend areas); 6 height-adjustable feet; minor dents in the insulation jacket; insulation jacket is missing in 2 sections (see photos) Overall width: 1,550 mm Overall height: 3,200 mm Overall length: 6,530 mm Insulation: available Miscellaneous: Chsdpfx Abexqclnszjd 8 minutes hot holding Pipes DN 80 Length: 647 meters Manufacturer: Tetra Pak Approx. weight: 7 t Location: Bremen Condition: used Last application: dairy INSULATION Insulation jacket material: stainless steel PIPEWORK Pipe material: AISI304 (V2A) 1.4301

Condition: good (used), Year of construction: 2000, pipe length (max.): 4,500 mm, bending radius (max.): 200 mm, Tube diameter: 76.1 mm Tube insertion length: 4500 mm Max. bending radius: 200 mm Chsdpfjxrtdksx Abzed Bending direction: right Machine weight approx.: 1.7 t Additional information Control: electronic 1-axis control

Condition: ready for operation (used), Year of construction: 2010, A complete IWK tube filling line is available. 1) Tube filling machine IWK TFS 80-1, year of manufacture: 2010, packaging material: aluminum/PE/PP/PVC/PE laminate/aluminum laminate, tube shape: round/conical, max. plastic tube diameter: 60mm, max. aluminum tube diameter: 50mm, tube length min./max.: 50mm/250mm, max. filling volume: 400ml, max. filling temperature: 65°C, max. product viscosity: 20000mPa/s, max. product density: 1.6g/cm³, max. filling capacity: 100tubes/min, weight: approx. 2400kg, operating hours: 30145h. 2) Tube feeding unit IWK TZ 204, max. tube diameter: 60mm, max. total tube length: 235mm, max. carton dimensions X/Y/Z: 600mm/650mm/265mm, max. output capacity: 22tube rows/min, weight: approx. 850kg. 3) Checkweigher Mettler Toledo XE2, year of manufacture: 2024, weighing range: 7g-100g, throughput: 100pieces/min. Documentation available. On-site inspection possible. Cjdexr Nv Nopfx Abzohd

Condition: new, Year of construction: 2025, Mandrel-free pipe bending machine RB 54 - NC-controlled, with large program memory Article number: 4300054 NC control for setting the bending angle Up to 50 programs can be saved High-quality, robust design Fast tool change Chjdpfxovk Scgs Abzjd Purely motor drive Automatically returns to the starting position TECHNICAL DATA General information Bending radius max. 162mm Bending angle max. 210° Bending speed(s) 2rpm Torque 2341Nm Dimensions and weights Length (product) approx. 600mm Width/depth (product) approx. 220mm Height (product) approx. 470mm Weight (net) approx. 107kg Bending performance Bending performance of pipe material 420 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 350 N/mm² (Ø x wall thickness) 54 x 4mm Bending performance of pipe material 650 N/mm² (Ø x wall thickness) 42 x 3mm Electrical data Drive motor power 1.1kW Connection voltage 400V Mains frequency 50Hz Location: from stock - available immediately -

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, machine/vehicle number: M961316, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Herber, controller model: CNC 4, pipe diameter (max.): 20 mm, pipe length (max.): 3,000 mm, bending angle (max.): 190 °, bending radius (max.): 120 mm, bending radius (min.): 15 mm, working width: 3,000 mm, number of axes: 3, working height: 750 mm, table length: 4,500 mm, table width: 1,350 mm, table height: 750 mm, overall weight: 1,300 kg, input voltage: 400 V, input current: 16 A, input frequency: 60 Hz, type of input current: AC, operating pressure: 120 bar, year of last overhaul: 2024, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, The machine is in very good condition and is serviced regularly. Cjdpfsw Snm Iex Abzshd

Condition: used, Year of construction: 1980, outer diameter: 38 mm, pipe diameter (max.): 38 mm, PRODUCT (PROFILE, TUBE) .. external diameter min.: 11 mm .. external diameter max.: 38 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 2 mm Csdpfxjxm Ru Ne Abzohd LINE CHARACTERISTICS .. welding process: HF inductive .. sawing process: travelling .. speed max.: 120 m/min ELECTRICAL SPECIFICATIONS .. mains power supply: 440 kVA For sale is a fully serviced and excellently maintained tube welding line . The line was previously used for the production of USM Haller furniture tubes, but it is designed for a wide range of tube diameters, making it highly versatile for different manufacturing requirements. Welding is carried out with an induction HF system from EFD Induction, built in 2018, ensuring a modern and efficient welding process. Total line length: approx. 100 m Operation: handled by 7 operators Condition: well-maintained, fully operational Scope of delivery: complete package An excellent opportunity for companies looking for a reliable and high-performance tube welding line.

Condition: used, GENERAL Exchange surface: 13.8 m² Internal diameter: 700 mm Total height: 1,950 mm Total length: 5,400 mm Other details: 1 connection bent (see photos); Weight: 1400 KG Location: Bremen Technical documentation: Drawing, acceptance certificate Nameplate: Condition: used Last application: condensate water SHELL SIDE Shell volume / liters: 1,400 liters TUBE SIDE Tube volume / liters: 400 liters Shell material: AISI316 (V4A) 1.4571 Tube material: AISI316 (V4A) 1.4571 Max. permissible operating overpressure, shell side / bar: 0.5 bar Codpfx Aexqciajbzshd Max. permissible operating vacuum, shell side / bar: 1.0 bar Max. permissible operating temperature, shell side / °C: 200 °C Max. permissible operating temperature, tube side / °C: 100 °C Max. permissible operating overpressure, tube side / bar: 6.0 bar Max. permissible operating vacuum, tube side / bar: 1.0 bar

Condition: used, Extension rings, spacer rings with an inner diameter of 40 mm. Image similar Available sets: 5 Price per set: €30.00 + VAT Inner diameter (d): 40 mm Outer diameter (D): 60 mm Chedpfoxmh T Aex Abzsd Widths each: 25/10/10/8/8/5 mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 90 kg, total length: 4,900 mm, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, input frequency: 50 Hz, gas tube heater Solaronics TU.E 23 production year: 2020-22 heat output: 23kw Cjdsq Hu Afspfx Abzohd gas burner + exhaust fan pipe length: 2x 4.9 meters G20.1 Nominal connection pressure: 25 mbar Nominal gas consumption: approx. 2.5 m3/h Gas connection: 1/2 " Connection voltage: IP21 AC 230V 50Hz

Condition: ready for operation (used), Elgo CNC controlled machine, very easy and user-friendly max tube cap: dia 76 mm x 4 mm thickness max square tube: 70 x 70 mm max radius: 600 bending angle: 180° Standard tooling 3D Special tooling on request Length: 1200 mm Codpfx Aboxpghqozohd Width: 800 mm Height: 1300 mm

Year of construction: 2006, condition: used, GENERAL Exchange surface: 24.7 m² Year of manufacture: 2006 Internal diameter: 508 mm Total height: 1,340 mm Overall length: 3,270 mm Location: Bremen Technical documentation: Drawing, TÜV certificates, Inspection certificate, CE marking and Declaration of Conformity Nameplate: Condition: used Last application: Methanol condenser SHELL SIDE Shell side volume / liters: 390 liters TUBE SIDE Tube side volume / liters: 150 liters Shell material: AISI316 (V4A) 1.4571 Tube material: AISI316 (V4A) 1.4571 Number of tubes: 63 Max. allowable operating overpressure shell side / bar: 0.49 bar Tube diameter / mm: 25 mm Max. allowable operating temperature shell side / °C: 100 °C Max. allowable operating temperature tube side / °C: 100 °C Csdoxqch Nspfx Abzshd Max. allowable operating overpressure tube side / bar: 6.0 bar

Condition: used, 10 spacer rings with an inner diameter of 40 mm and a width of 10 mm. Image similar Available sets: 2 Price per set: €35.00 + VAT Chjdexmh Rhepfx Abzsd Inner diameter (d): 40 mm Outer diameter (D): 60 mm width: 10 mm

Condition: ready for operation (used), power: 2.2 kW (2.99 HP), empty load weight: 635 kg, total length: 1,100 mm, total width: 630 mm, total height: 925 mm, load capacity: 22,000 kg, bending examples: - 100 mm width x 20 mm thickness - 120 mm width x 15 mm thickness min axis base between mobile and fixed pins: 110 mm max axis base between mobie and fixed pins: 310 mm Cedpfx Absxpgi Iezjhd Standard equipment: V-90 Max ram adjustment: 200 mm High speed displacement: 1750 mm/min Working speed: 450 mm/min Returning speed: 2000 mm/min Table area: 625 x 1100 mm Table height: fixed (1) -- sliding (2): 920 mm Courant needed: 400V