Used Manipulator for sale (315)

Year of construction: 2003, condition: good (used), machine/vehicle number: 956-03-13, OFFER 21072 Technical data: Lhjdpfxegxmabo Aabjn - Load capacity positioning table approx. 750 kg - face plate diameter 500 mm - max. workpiece diameter 1600 mm - height of turntable in horizontal position approx. 750 mm - rotary table with clockwise + anticlockwise rotation - axis of rotation turntable endless 360 ° - Turning time per revolution 12,5 sec. - Swivelling left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot switch for turntable + swivel arm - hydr. clamping bolt for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping travel of the clamping bolt 32 mm - Clamping force pushing / pulling 80 / 48,9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manual or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - weight approx. 2500 kg - Separate control cabinet with high frequency device for - high frequency tools

Condition: excellent (used), Year of construction: 2015, Nachi - Fujikoshi Corp Robotic Manipulator, FD -MC10L Six-axis robotic manipulator Nachi Nachi - Fujikoshi Corp (2015) Lhjdpfx Aev Hnmmoabjn Confessions: Item Description, Parameters Quantity Robotic Manipulator, FD-MC10L 1 pc ∼ Six-axis robotic manipulator nachi ∼ Max. Reach Radius 2019 mm at p-Point ∼ Repeatable Position Accuracy ± 0.06 mm ∼ Wrist Load Capacity 10KG ∼ Arm Load Capacity in the 3rd Axis Location 15kg Absolute Position Readout ∼ High Dynamics of Movements and Arm Rigidity ∼ Protection of the Wrist of the Robot Robot IP65 Control System, nachi FD11 Control Unit of Six-Axis Manipulators nachi ∼ Modular Construction ∼ ∼ ∼ Windows System Kits ∼ Application SW FOR PROGRAMMING MOTIONS FD CONTROL ∼ Built-in PLC module for peripherals ∼ Programming module teach pendant ∼ 15m ∼ JogDial Controller ∼ Ethernet Spread for network connections ∼ FTP client for data backup ∼ USB port ∼ Energy Saving mode ∼ Direct Control of the Welding Source from Learning Pendant PCS ∼ Track length CCA 12000 mm ∼ supports tracks with cleaning station holder and wire stripper Guide ∼ Anchoring to the floor 030 Positioner with support horse 2 pcs ∼ load capacity max. 1500 kg ∼ Maximum Flow Diameter of the Fixture with the Part 1650 mm ∼ Tailstock with Hollow Flange for Media Transfer 6500mm 1st Station and 4500mm 2nd Station ∼ Synchronization with Robot Movements 040 Control Elements 1 Set ∼ Operator Panel – START, STOP, RESET, EMG STOP ∼ Control of Positioners for Loading Parts ∼ Central Control Panel - Visualization of the Workplace, Display, EMG Stop Signal Beacon for Each Workstation 050 Safety Elements and Fencing 1 Set ∼ Modular Safety Walls with Height 2000m, Steel, Solid Blocking ∼ Detection of the Presence of the Robot Against the Workstation ∼ Dividing Partition Between the Stations ~ Barrier of the Entrance to the Station with Optics for the ESAB Welding Source ARISTOMIG U5000I 1 pc ∼ Digital Pulse Inverter 500a ∼ Characteristics For MIG/MAG AND TIG Cooled Robotic Torch ∼ Collision Switch Unit ∼ Feeder 30m/min, digitally controlled Large Capacity Magazine ∼ Power Cable Assembly 070 Automatic Torch Calibration System 1 pc ∼ Detection of Exact Position of Part, Correction of Weld Position by Torch ∼ Absolute Accuracy 0.5 mm ∼ Search by Touch of Nozzle or Wire 080 Automated Cleaning System 1 pc By Robot Control Unit ∼ Nozzle Supply with Cutting Fluid ∼ Shearing Station 110 DIGESTORY By Robot Control System ∼ Release Station for Loading Capacity by Gantry Crane ∼ Driven by Electric Motor 120 Exhaust Unit 1 KS Nederman Unit ∼ Air Exchange 4000M3 PER HOUR ∼ Automatic Control With Robot Start-up, Preparation of Extraction Points According to Its Position ∼ Atomic Filters Filters Filters Filters Filters, Drying ∼ Installation, Distribution, 2PCS Automatic Dampers 130 Tig Torch Assembly with 1 PCS ADDITIONAL WIRE Robot ∼ Cold Wire Feeder ∼ Holder with Quick-Clamping System for Tig and Mig Feeders Control System Configuration The Robot Is In Very Good Technical Condition and It Is Possible To View It In Us, Or. Vide Vide Vide Video. Time against Automatic Welding Mode: 21Hours, 19Minutes

Condition: excellent (used), Year of construction: 2005, Industrial manipulators (2 units) Mounting: ceiling-mounted Ceiling guide length: approx. 15 meters Number of axes: 4 Load capacity: Manipulator 1: 30 kg Manipulator 2: 35 kg Lodpjwvi Upofx Aabehn Gripper: pneumatic part gripper (for each manipulator) Year of manufacture: 2005

Condition: good (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, total height: 4,820 mm, total width: 15,000 mm, total length: 20,000 mm, type of input current: AC, input voltage: 400 V, SOCO SYSTEM End-of-Line Packaging Line with Robotic Palletizer, Carton Erectors & Sealers (Year of manufacture: 2020) This offer includes our complete SOCO SYSTEM shipping and end-of-line packaging line, exactly as installed in our facility. The system is fully operational, well-maintained, and was used until recently for pallet dispatch. This line is ideal for companies with high shipping or packaging volumes that value automated, efficient, and modular packaging processes. The system can be taken over in full or in part – we are happy to advise you on the optimal configuration. Technical Equipment / Components - 2 x Carton Erectors BE-2300 ATS and BE-2200 ATS Lodpfx Ajxdb Sasabjhn Automatic carton erectors for folding and sealing bottom flaps (self-adhesive tape, width = 50 mm). - Long Flap Spreader For precise feeding and alignment of cartons onto the main conveyor line. - Powered Conveyors & Labelling Sections Roller conveyors, curves, and distribution lines with integrated label transport. - Carton Sealer T-4000 with Tape Alarm Automated top carton sealing with self-adhesive tape. - Labeller LOGOPAK Logomatik 415-T (integration ready) Transfers cartons for automatic labelling and verification via scanner. - Palletizing Robot SOCO PRS-LRS-1218-H3 Industrial robot for fully automated palletizing according to customer-specific patterns. - Pallet magazine for 14 pallets Automatic provision of empty pallets. - Safety Features: Swing doors / light curtains, emergency stop interlinking, Type 2 control, controller, CE certification. - Additional Modules: T-55 with conveyor system and ball table, F-100 + T-2000 conveyor system, RAL 9006 special colour. Complete assembly, factory testing, installation, and commissioning included (original system price according to SOCO SYSTEM offer: €243,700). Function Description The line automatically erects cartons, seals the bottoms, conveys them on the main packaging conveyor, closes and seals the tops, labels and inspects them. Error-free cartons are then picked up by the robotic palletizer and stacked according to defined pallet layouts. The entire system is modular and can be integrated into existing production or shipping operations. General Information Year of manufacture: 2020 Manufacturer: SOCO SYSTEM A/S Condition: used / very good / immediately operational Location: Norderstedt (near Hamburg) Scope of delivery: complete shipping line including robot, sealer, and conveyor technology.

Condition: used, Handling Device, Handling System JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 200 Horizontal movement: 450 mm Vertical movement: 600 mm Ledpfx Aajfgpfmebehn Load capacity: 4 to 10 kg Reach: 150 to 600 mm Vertical guide column: Ø 25 mm Horizontal guide columns: Ø 16 mm Tool holder: 33 x 33 mm with screw clamp - Movable in three axes (horizontal, vertical, rotatable) - KÜBLER rotary encoder for rotation, type 8.5873.5320.B311.S003 - BALLUFF linear transducer for horizontal movement, type BTL6-A110-M0450-A1-S115 - 2 pieces balancer for vertical movement CP DESOUTTER, type 10 D, adjustment range 2 to 5 kg per balancer - For weightless suspension of small devices - Stepwise adjustable load capacity - Constant pulling force Required space (L x W x H): 770 x 310 x 1200 mm Dead weight: 19 kg Good condition

Condition: excellent (used), Year of construction: 2022, operating hours: 1,619 h, functionality: fully functional, machine/vehicle number: PEC 50 2158273, total height: 3,000 mm, total width: 1,000 mm, total length: 1,000 mm, type of input current: three-phase, input voltage: 400 V, Arm-mounted manipulator with a gripper for cylindrical parts. Lhodpjw Hwq Tofx Aaben

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0370250754, Item 23374 Hydraulic Welding Rotating and Tilting Table – Three-Axis Welding Manipulator Technical Specifications: - Max. load capacity 3000 kg - Faceplate diameter 1000 mm - Min. table height in horizontal position approx. 1070 mm - Max. table height in horizontal position approx. 1970 mm - Faceplate motor-rotatable + swiveling or tilting - Rotation movement electrically continuously adjustable approx. - Right-hand + left-hand rotation - Welding current transmission approx. 700 A Lhedpfov Rbivex Aabjn - 400 V drive - Connected load 4.0 kW - Hand-held remote control for direction of rotation, swiveling or tilting - Space requirement approx. W 2250 x H 1070 x D 1350 mm - Weight approx. 2000 kg

Year of construction: 2012, condition: excellent (used), machine/vehicle number: MBHF M01+02, Technical data: 2x Zasche / Demag KSL-L manipulator handling device lifting aid Payload at full radius 12+15KG Height: approx. 3.3m UK boom: approx. 3.2m Projection: approx. 1.50+1.50m = 3m Weight completely approx. 300kg with gripper and operation Lsdpfxjpwgrfe Aabshn Height: approx. 2.7m UK boom: approx. 2.6m Projection: approx. 1.40+1.40m = 2.8m Weight completely approx. 300kg Bfor7sx3woe without gripper and operation Swivel range 360° (via articulated arm), connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim See pictures Shipping by courier or collection only by appointment

Condition: as good as new (ex-display), Year of construction: 2022, Alfa Star pickers available in 3 versions: P 450V, P 650V, P 850WV Available immediately from stock in Poland Year of production - 2022 P450V Injection molding machine short-circuit force range -30-60 tons - €1799 Vertical stroke [mm] -450 Transverse stroke [mm] -120 Rotation angle [°] -60-90 Pickup time [s] -1.3 Ledpfsqwyi Dox Aabjhn Max. load capacity [kg[ -2 Dry cycle time [s] -4.0 Air consumption (NI/cycle) -11 P650V Injection molding machine short-circuit force range -50-160 tons -1985 euro Vertical stroke [mm] -650 Transverse stroke [mm] -120 Rotation angle [°] -60-90 Pickup time [s] -1.7 Max. lifting capacity [kg] -2 Dry cycle time [s]-4.5 Air consumption (NI/cycle) -14 P850WV Injection molding machine short-circuit force range-160-300 tons -2495 euros Vertical stroke [mm]-850 Transverse stroke [mm] -200 Rotation angle [°] -60-90 Pickup time [s] -1.9 Max. load capacity [kg] -2 Dry cycle time [s] -5.8 Air consumption (NI/cycle) -14 More than 30 units available off-the-shelf, all with CE. We have access to spare parts and service. Offer for users and distributors

Condition: excellent (used), Year of construction: 2021, Table Ø: 1000mm Table load on 200 mm:600 Lhodpowvrbfjfx Aabjn Table load on 400 mm:400 Table load on 600 mm:280 Table load on 1000 mm:200 Rotation table: 360.000° Length: 1200mm Width: 1200mm Height: 1400mm Weight: 1200kg

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwdriving technology Type: Handy-flex 300 Horizontal movement: 490 mm Vertical movement: 400 mm Load capacity: max. 14 kg Lhodpfx Aogbpuhjaben Handyflex projection: 275 to 765 mm Projection from frame: 725 mm Rotation radius at full projection: approx. 135° Height of mounting plate above floor 1250 to 1650 Vertical guide pillar: Ø 30 mm Horizontal guide pillars: Ø 20 mm Mounting plate for tool holder: 305 x 90 - Can be moved in three axes (horizontal, vertical, rotatable) - Rotary encoder BAUMER type GI355.022C315 for rotary and horizontal movement - Balancer for vertical movement - Adjustable load capacity - for weightless suspension of small appliances - Ball bearing guide in all axes - mounted in a frame made of BOSCH system aluminum profile, cross-sections 45x45 / 90x45 / 180x45 / 90x90 mm - Height-adjustable feet Space requirement L x W x H: 1450 x 1250 x 2480 mm dead weight: 180 kg good condition

Condition: new, Year of construction: 2025, functionality: fully functional, lifter boy for loading sheet metal on laser machines Lhodevc U Shepfx Aabjn easy operation ( vacuum pump are in the control unit) no cable by loading laser machine continu vacuum protection vacuum pomp work on battery and they are in operation unit battery loader included. 300, 600 and 800 kg save operation include battery loader ( buster type ) include mounting manual. CE complete pack in wooden transport box we can deliver till 6 meter long scheetmetal.

Year of construction: 2003, condition: good (used), machine/vehicle number: 956-03-15, Technical data: - Load capacity positioning table approx. 750 kg - face plate diameter 500 mm - max. workpiece diameter 1600 mm - height of turntable in horizontal position approx. 750 mm - rotary table with clockwise + anticlockwise rotation - axis of rotation turntable endless 360 ° - Turning time per revolution 12,5 sec. - Swivelling left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot switch for turntable + swivel arm - hydr. clamping bolt for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping travel of the clamping bolt 32 mm Lhjdpfx Aegu Dwpjabon - Clamping force pushing / pulling 80 / 48,9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manual or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - weight approx. 2500 kg - Separate control cabinet with high frequency device for - high frequency tools

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center Lhedpfxev Rpx Sj Aabjn • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system

Condition: new, Year of construction: 2023, Positioner powered by three-phase current Rotation of table and arm by means of hydraulic swivels Height adjustment of the arm by means of a hydraulic cylinder Controlling functions on the positioner housing Useful in positioning parts in: welding cleaning assembly Increasing work efficiency up to 40% The use of unlimited rotation in 2 axes and, in addition, vertical and horizontal movement, allows any positioning of the attached workpiece (also "overhead"). The 3-axis positioner provides a significant improvement in work culture compared to traditional pan/tilt positioners (optimal positioning of the workpiece, easy operation). Lhedpfx Ashtq Nzjabjn Advantages and benefits: For the employer: increased labor productivity by up to 40% through optimum positioning of workpieces - resulting in short amortization time of the device increased production efficiency does not require additional space on the shop floor better quality of welded joints - always possible to weld in the sub-lower position robust design of the device ensures long-term, trouble-free operation For the operator: ensuring ergonomic posture for the working person minimizing the risk of accidents - no changes in the fixing of objects no interruptions in work caused by waiting for the crane easy installation and operation It is possible to fully automate welding by using Kawasaki welding robots. We also offer positioners with a robot and integrated control system. ADDITIONAL OPTIONS: REMOTE CONTROL WITH CABLE TO OPERATE THE POSITIONER PEDAL WITH CABLE FOR OPERATING THE TABLE ROTATION STEPLESS ADJUSTMENT OF THE SPEED OF TABLE ROTATION AND ARM ROTATION FUNCTION OF CONSTANT TABLE ROTATION LENGTH AND SHAPE OF THE ARM SIZE AND SHAPE OF THE TABLE ROTATIONAL MASS We can make the positioner according to the customer's individual guidelines.

Condition: good (used), Year of construction: 2021, Remote control with frequence Foot switch control with frequence Load capacity per section:1,5T Lhsdpowvq Rljfx Aabjn Vessel range Minimum: 200 Vessel range Maximum: 1500Ø Variable rotation: 80 - 950Rpm No of wheels per section:2 Wheel dimensions: 200 x 100Ø x mm Length: 1010mm Width: 350mm Height: 457mm Weight: 200kg

Condition: used, Handling device, handling system JÄGER HANDLING Manipulator for screwing technology Type: Handy-flex 200 horizontal movement: 300 mm vertical movement: 370 mm Lhsdpefx Hxzsfx Aabjn Load capacity: 10 to 14 kg Projection: 250 to 550 mm guide column vertical: Ø 25 mm Guide columns horizontal: Ø 16 mm tool holder: Ø 26 mm oval with screw clamping - Movable in three axes (horizontal, vertical, rotary) - 1 piece Balancer for vertical movement TECHNA, type 9340, adjustment range 10 to 14 kg - adjustable latch for vertical movement, manual release via Bowden cable - for weightless suspension of small appliances - Load capacity adjustable - constant attraction Space requirement L x W x H: 880 x 500 x 1120 mm Own weight: 23 kg sound condition

Year of construction: 1998, condition: good (used), machine/vehicle number: 956-98-08, OFFER 21068 Technical data: Lodpegt Uz Nsfx Aabshn - Load capacity positioning table approx. 750 kg - face plate diameter 500 mm - max. workpiece diameter 1600 mm - height of turntable in horizontal position approx. 750 mm - rotary table with clockwise + anticlockwise rotation - axis of rotation turntable endless 360 ° - Turning time per revolution 12,5 sec. - Swivelling left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot switch for turntable + swivel arm - hydr. clamping bolt for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping travel of the clamping bolt 32 mm - Clamping force pushing / pulling 80 / 48,9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manual or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - Weight approx. 2500 kg

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. They can be widely used both with simple, Lhodpfefz Dmmjx Aaben as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Year of construction: 2023, condition: new, Welding positioner Positioner powered by three-phase current Rotation of table and arm by means of hydraulic swivels Controlling functions on the positioner housing Useful in positioning parts for: -welding -cleaning -assembly Increase productivity up to 40% Lhedehtq R Aepfx Aabon Advantages and benefits: For the employer: -increase labor productivity by up to 40% through optimal positioning of workpieces - resulting in a short depreciation time for the machine -increased production efficiency does not require additional space on the shop floor -improved quality of welded joints - always possible to weld in a comfortable position -solid construction of the device ensures long-term, trouble-free operation For the operator: -providing ergonomic posture for the working person -minimizing the risk of accidents -no changes in the fixing of objects -no interruptions in work caused by waiting for the crane easy installation and operation It is possible to fully automate welding by using Kawasaki welding robots. We also offer positioners with robot and integrated control system. ADDITIONAL OPTIONS: REMOTE CONTROL WITH CABLE TO OPERATE THE POSITIONER PEDAL WITH CABLE FOR OPERATING THE TABLE ROTATION STEPLESS ADJUSTMENT OF THE SPEED OF TABLE ROTATION AND ARM ROTATION FUNCTION OF CONSTANT TABLE ROTATION SIZE AND SHAPE OF THE TABLE ROTATIONAL MASS We can make the positioner according to the customer's individual guidelines.

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. Bmt7r28v0e They can be widely used both with simple, Lodpsf Aad Nofx Aabjhn as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Condition: new, Year of construction: 2023, Positioner powered by three-phase current Rotation of table and arm by means of hydraulic swivels Height adjustment of the arm by means of a hydraulic cylinder Controlling functions on the positioner housing Useful in positioning parts in: welding cleaning assembly Increasing work efficiency up to 40% The use of unlimited rotation in 2 axes and, in addition, vertical and horizontal movement, allows any positioning of the attached workpiece (also "overhead"). The 3-axis positioner provides a significant improvement in work culture compared to traditional pan/tilt positioners (optimal positioning of the workpiece, easy operation). Advantages and benefits: For the employer: increased labor productivity by up to 40% through optimum positioning of workpieces - resulting in short amortization time of the device increased production efficiency does not require additional space on the shop floor better quality of welded joints - always possible to weld in the sub-lower position robust design of the device ensures long-term, trouble-free operation For the operator: ensuring ergonomic posture for the working person minimizing the risk of accidents - no changes in the fixing of objects no interruptions in work caused by waiting for the crane easy installation and operation It is possible to fully automate welding by using Kawasaki welding robots. We also offer positioners with a robot and integrated control system. ADDITIONAL OPTIONS: REMOTE CONTROL WITH CABLE TO OPERATE THE POSITIONER PEDAL WITH CABLE FOR OPERATING THE TABLE ROTATION STEPLESS ADJUSTMENT OF THE SPEED OF TABLE ROTATION AND ARM ROTATION FUNCTION OF CONSTANT TABLE ROTATION LENGTH AND SHAPE OF THE ARM SIZE AND SHAPE OF THE TABLE ROTATIONAL MASS We can make the positioner according to the customer's individual guidelines. Lhjdpfohzuvuex Aaben

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Lodpfjfz Dmxex Aabehn Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Year of construction: 2023, condition: new, Positioner powered by three-phase current Rotation of table and arm by means of hydraulic swivels Height adjustment of the arm by means of a hydraulic cylinder Controlling functions on the positioner housing Useful in positioning parts in: welding cleaning assembly Increasing work efficiency up to 40% The use of unlimited rotation in 2 axes and, in addition, vertical and horizontal movement, allows any positioning of the attached workpiece (also "overhead"). The 3-axis positioner provides a significant improvement in work culture compared to traditional pan/tilt positioners (optimal positioning of the workpiece, easy operation). Advantages and benefits: For the employer: increased labor productivity by up to 40% through optimum positioning of workpieces - resulting in short amortization time of the device Lsdpfx Aeiuna Eoabohn increased production efficiency does not require additional space on the shop floor better quality of welded joints - always possible to weld in the sub-lower position robust design of the device ensures long-term, trouble-free operation For the operator: ensuring ergonomic posture for the working person minimizing the risk of accidents - no changes in the fixing of objects no interruptions in work caused by waiting for the crane easy installation and operation It is possible to fully automate welding by using Kawasaki welding robots. We also offer positioners with a robot and integrated control system. ADDITIONAL OPTIONS: REMOTE CONTROL WITH CABLE TO OPERATE THE POSITIONER PEDAL WITH CABLE FOR OPERATING THE TABLE ROTATION STEPLESS ADJUSTMENT OF THE SPEED OF TABLE ROTATION AND ARM ROTATION FUNCTION OF CONSTANT TABLE ROTATION LENGTH AND SHAPE OF THE ARM SIZE AND SHAPE OF THE TABLE ROTATIONAL MASS We can make the positioner according to the customer's individual guidelines.

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. They can be widely used both with simple, Lhodpfx Aefz Dmfoabjn as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables